Murata Electronics North America 2411M FHSS Module User Manual Draft Copy of Users Manual

Download:
Mirror Download [FCC.gov]
Document ID	176014
Application ID	Zg3JJZKbC68sf5nHKG3+Kg==
Document Description	Draft Copy of Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	3.69kB (46081 bits)
Date Submitted	2001-10-25 00:00:00
Date Available	2001-11-30 00:00:00
Creation Date	2001-10-25 07:55:31
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-10-25 07:55:33
Document Title	Draft Copy of Users Manual

WIT2411
2.4GHz Spread Spectrum
Wireless Industrial
Transceiver
Integration Guide
(PRELIMINARY)
October 18, 2001
5375 Oakbrook Parkway
Norcross, Georgia 30093
www.cirronet.com
+1 (678) 684-2000
Note: This unit has been tested and found to comply
with the limits for a class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense. Commensurate with
EIRP limits specified in FCC Rules 15.247b, this
device may not be used with antennas that exceed
36dB of gain in point-to-point applications or 16dB of
gain in multi-point applications.
If the WIT2411 is installed within another device the outside of the device into which the
WIT2411 is installed must also display a label referring to the enclosed module. The label required
for the WIT2411 module is as follows: Transmitter Module FCCID: HSW-2411M.
About This Manual
This manual is designed to allow integration of the Cirronet WIT2411 OEM module into
complete products. Care has been taken to try and make sure all of the information in this manual
is accurate. However, specifications can change over time and Cirronet cannot guarantee the
accuracy of this information. If you have any questions on any information in this manual, please
contact Cirronet Technical Support at +1-678 684 2000.
Cirronet is a trademark of Cirronet Incorporated. All other trademarks belong to their respective companies.
Notice to WIT2411 users/installers using the following fixed antenna:
Mobile Mark 9dBi Corner Reflector
The field strength radiated by this antenna, when connected to a transmitting WIT2411 module,
may exceed FCC mandated RF exposure limits. FCC rules require professional installation of this
antenna in such a way that the general public will not be closer than 2 m from the radiating
aperture this antenna. End users of these systems must also be informed that RF exposure limits
may be exceeded if personnel come closer than 2 m to the aperture of this antenna.
Notice to WIT2411 users/installers using the following mobile antennas:
Mobile Mark 9dBi omnidirectional,
Cirronet 6dBi patch,
Ace 2dBi dipole,
The field strength radiated by any one of these antennas, when connected to a transmitting
WIT2411 module, may exceed FCC mandated RF exposure limits. FCC rules require professional
installation of these antennas in such a way that the general public will not be closer than 20 cm
from the radiating aperture of any of these antennas. End users of these systems must also be
informed that RF exposure limits may be exceeded if personnel come closer than 20 cm to the
apertures of any of these antennas.
Declaration of Conformity
We,
Cirronet Incorporated
5375 Oakbrook Parkway
Norcross, Georgia 30093 USA
declare under our sole responsibility that the product,
WIT2411
To which this declaration relates is in conformity with the following standards or other normative
documents:
ETS 300 328 (November 1996)
ETS 300 826
EN60950
following the provisions of the R&TTE Directive.
Norcross, Georgia
Timothy D. Cutler
Vice President
January 29,2001
Use Within the European Union
The WIT2411 is intended for use within the following European Community States:
Austria, Belgium, Denmark, Finland France, Germany, Greece, Ireland, Italy, Luxembourg, The
Netherlands, Portugal, Spain, Sweden and the United Kingdom
The WIT2411 is also intended for use in the following non-European Union States:
Iceland, Norway, Switzerland
Use of the WIT2411 in France
When used in France, the WIT2411 can only be operated with the France hopping pattern
selected. This is accomplished by setting the pe parameter to TBD. Refer to Section 5.3 Protocol
Commands for details.
Use of the WIT2411 in Spain
When used in Spain, the WIT2411 can only be operated with the Spain hopping pattern selected.
This is accomplished by setting the pe parameter to TBD. Refer to Section 5.3 Protocol
Commands for details.
Use of the WIT2411 in Another Product
Manufacturers that incorporate the WIT2411 into a product they place on the
market in the European Union must notify the national authority responsible in
the relevant Member State for spectrum management of the intention to place
such equipment on its national market.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:10:25 07:55:31
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:10:25 07:55:33-04:00
Page Count                      : 5

EXIF Metadata provided by EXIF.tools