Murata LB1CL Communication Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2878657
Application ID	BaRrl8UZ6P+AQKKPSBH2GA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.05kB (225608 bits)
Date Submitted	2016-01-20 00:00:00
Date Available	2016-07-19 00:00:00
Creation Date	2016-01-08 12:31:36
Producing Software	DocuCom PDF Driver 9.00
Document Lastmod	2016-01-19 13:18:13
Document Title	Microsoft PowerPoint - User’s Manual of Type1CL for FCC_Jan 8.pptx
Document Creator	Microsoft PowerPoint - User’s Manual of Type1CL for FCC_Jan 8.pptx
Document Author:	KM02210

LBEQ6ZZ1CL Installation Manual for FCC
Please make sure that your product has been evaluated and
confirmed from the aspect of the fitness for the specifications and this
documentation of our product.
FCC ID of this product is as follows.
FCC ID: VPYLB1CL
Contents
1. PIN Layout
2. Supply Voltage
3. Power Levels
4. Notice
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
08 January 2016
1. PIN Layout

D123
1CLxxx
123456789ABCDE
Model:LBEQ6ZZ1CL
FCC ID:VPYLB1CL
IC:772C-LB1CL

No.
10
11
12
13
14
15
16
17
18
19
20
PIN NAME
GND
GND
GND
NC
NC
NC
GPIO0
TCK
TMS
TDI
TDO
GPIO1
GND
NC
GND
VIO
GND
PCM_IN
PCM_OUT
PCM_CLK
No.
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
PIN NAME
PCM_SYNC
GND
SD_CLK
SD_CMD
SD_D0
SD_D1
SD_D2
SD_D3
GND
GND
VBAT
GND
PDn
UART_TX
UART_RX
UART_CTS
UART_RTS
NC
GND
NC
No.
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
PIN NAME
NC
GND
GPIO2
GPIO3
GND
GND
GND
BT_ANT
GND
GND
GND
GND
GND
GND
GND
GND
WLAN_ANT
GND
08 January 2016
2. Supply Voltage
min.
typ.
max.
unit
Operating Temperature
-40
25
85
deg.C
Supply Voltage
3.0
3.3
3.6
VBAT
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
08 January 2016
3. Power Levels

Mode
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n

Mode
IEEE 802.11a
IEEE 802.11n (HT20)
IEEE 802.11n (HT40)
IEEE 802.11ac (HT20)
IEEE 802.11ac (HT20
IEEE 802.11ac (VHT80)

Mode
BT
BLE
Setting Power
[dBm]
18
14
14
Setting Power
[dBm]
14
14
13
Setting Power
[dBm]
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
08 January 2016
4. Notice
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
08 January 2016
4. Notice
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
08 January 2016
4. Notice
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
3) The use of an antenna with gain less than 2.07 dBi (for 2.4GHz) and 2.43 dBi (for 5GHz)
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM
integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a
separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that
20 cm may be maintained between the antenna and users. The final end product must be labeled in a
visible area with the following: “Contains FCC ID:VPYLB1CL”. The grantee‘s FCC ID can be used only
when all FCC compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
08 January 2016

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : DocuCom PDF Driver 9.00
Creator Tool                    : Microsoft PowerPoint - User’s Manual of Type1CL for FCC_Jan 8.pptx
Create Date                     : 2016:01:08 12:31:36+09:00
Modify Date                     : 2016:01:19 13:18:13+08:00
Metadata Date                   : 2016:01:19 13:18:13+08:00
Format                          : application/pdf
Title                           : Microsoft PowerPoint - User’s Manual of Type1CL for FCC_Jan 8.pptx
Creator                         : KM02210
Document ID                     : uuid:09fdd55e-1c05-4bce-bcd6-98854a0a0f4f
Instance ID                     : uuid:ee374ba4-5c07-47e8-8fcf-5554eb3dc992
Page Count                      : 7
Author                          : KM02210

EXIF Metadata provided by EXIF.tools