Murata LB1PJ W-LAN + Bluetooth Module User Manual

Murata Manufacturing Co., Ltd. W-LAN + Bluetooth Module Users Manual

Users Manual

Preliminary Specification Number :SP-ZZ1PJ-F Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. W-LAN + Bluetooth Module Data Sheet Qualcomm Chipset for 802.11a/b/g/n/ac + Bluetooth 4.1 (Dual) MP Part Number: LBEE5ZZ1PJ
Preliminary Specification Number : SP-ZZ1PJ-F 1 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. The revision history of the product specification Revised Date Revision Code Revised Page Revised Item Change Reason April 21, 2017 - - - First release June 26, 2017 A 3,4 Module Height Updated Aug 2, 2017 B 7, 12~20 Absolute Maximum Rating Operating Condition DC/RF Characteristics Updated Aug 10, 2017 C 22 Reference circuit Added Aug 21, 2017 D 21 Land pattern Added Nov 2, 2017 E 7, 24~26 Marking Tape and Reel packing Added Dec 25, 2017 F 4, 31~38 Certification information Appendix Added
Preliminary Specification Number : SP-ZZ1PJ-F 2 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. TABLE OF CONTENTS 1. SCOPE ..................................................................................................................................................... 3 2. KEY FEATURE ...................................................................................................................................... 3 3. Part Number ........................................................................................................................................... 3 4. RoHS Compliance ................................................................................................................................... 3 5. Block Diagram ........................................................................................................................................ 3 6. Certification Information ....................................................................................................................... 4 6.1. Radio Certification ................................................................................................................... 4 7. DIMENSIONS, MARKING AND TERMINAL CONFIGURATIONS ................................................. 4 7.1. Dimensions ............................................................................................................................... 4 7.2. Pin Layout and PIN Descriptions ........................................................................................... 5 7.3. Marking ..................................................................................................................................... 7 8. ABSOLUTE MAXIMUM RATINGS*1)................................................................................................... 8 9. OPERATING CONDITION*2) ................................................................................................................ 8 10. External low–power 32.768 kHz clock............................................................................................... 8 11. POWER ON SEQUENCE .................................................................................................................. 9 11.1. Case 1: 3.3 V power down after 1.8 V .................................................................................. 9 11.2. Case 2: 1.8 V power down after 3.3 V ................................................................................ 10 11.3. Case 3: All power rails supplied with 3.3 V .......................................................................11 12. Digital I/O Requirements ................................................................................................................. 12 13. INTERFACE TIMING AND AC CHARACTERISTICS ................................................................. 12 13.1. Bluetooth UART Timing .................................................................................................... 12 13.2. I2S Timing ........................................................................................................................... 12 13.3. SDIO Timing ....................................................................................................................... 12 14. DC / RF Characteristics.................................................................................................................... 13 14.1. DC/RF Characteristics for IEEE802.11b - 2.4GHz .......................................................... 13 14.2. DC/RF Characteristics for IEEE802.11g - 2.4GHz .......................................................... 14 14.3. DC/RF Characteristics for IEEE802.11n – 2.4GHz ......................................................... 15 14.4. DC/RF Characteristics for IEEE802.11ac – 2.4GHz ........................................................ 16 14.5. DC/RF Characteristics for IEEE802.11a - 5GHz ............................................................. 17 14.6. DC/RF Characteristics for IEEE802.11n - 5GHz ............................................................. 18 14.7. DC/RF Characteristics for IEEE802.11ac - 5GHz ............................................................ 19 14.8. DC/RF Characteristics for Bluetooth ................................................................................ 20 14.9. DC/RF Characteristics for Bluetooth (LE) ........................................................................ 21 15. LAND PATTERN (TOP VIEW) ........................................................................................................ 22 16. REFERENCE CIRCUIT ................................................................................................................... 23 17. TAPE AND REEL PACKING ........................................................................................................... 24 18. NOTICE ............................................................................................................................................. 27 18.1. Storage Conditions: ............................................................................................................ 27 18.2. Handling Conditions: ......................................................................................................... 27 18.3. Standard PCB Design (Land Pattern and Dimensions): ................................................. 27 18.4. Notice for Chip Placer: ....................................................................................................... 27 18.5. Soldering Conditions: ......................................................................................................... 28 18.6. Cleaning: ............................................................................................................................. 28 18.7. Operational Environment Conditions: .............................................................................. 28 18.8. Input Power Capacity: ........................................................................................................ 29 19. PRECONDITION TO USE OUR PRODUCTS ............................................................................... 30 Please be aware that an important notice concerning availability, standard warranty and use in critical applications of Murata products and disclaimers thereto appears at the end of this specification sheet.
Preliminary Specification Number : SP-ZZ1PJ-F 3 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 1. SCOPE This specification is applied to the IEEE802.11a/b/g/n/ac W-LAN + Bluetooth 4.1 combo module. 2. KEY FEATURE - Chipset : QCA9377-3 - Size : 7.2 x 7.4 x 1.25 (max) mm - PCB w/ shielded resin mold module - IEEE802.11a/b/g/n/ac dual band 2.4G/5G - Supports BT4.1 - SDIO 3.0 (WLAN), UART/PCM (Bluetooth) - Lead Free Module 3. Part Number Ordering Part Number Description LBEE5ZZ1PJ MP order LBEE5ZZ1PJ-TEMP In case of sample order 4. RoHS Compliance This module is compliant with the RoHS directive. 5. Block Diagram
Preliminary Specification Number : SP-ZZ1PJ-F 4 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 6. Certification Information 6.1. Radio Certification USA/Canada FCC ID VPYLB1PJ IC 772C-LB1PJ *Please follow installation manual in Appendix Europe EN300328 v2.1.1, EN301893 v2.1.1 and EN300440 v2.1.1 test reports are prepared. 7. DIMENSIONS, MARKING AND TERMINAL CONFIGURATIONS 7.1. Dimensions <TOP VIEW> <BOTTOM VIEW> <SIDE VIEW> Table 1 Dimension (Unit: mm) Mark Dimension Mark Dimension Mark Dimension L 7.40±0.20 W 7.20±0.20 T 1.25 max a1 0.30±0.10 a2 0.30±0.10 a3 0.30±0.10 a4 0.80±0.10 a5 0.30±0.10 b1 0.20±0.15 b2 0.25±0.15 b3 1.45±0.15 b4 5.15±0.15 b5 0.20±0.15 b6 1.05±0.15 b7 1.35±0.15 b8 1.55±0.15 c1 0.55±0.10 c2 0.55±0.10 c3 0.55±0.10 c4 0.80±0.10 c5 0.30±0.10 e1 0.30±0.10 e2 0.30±0.10 e3 0.30±0.10 e4 0.30±0.10 e5 0.30±0.10 (unit : mm)
Preliminary Specification Number : SP-ZZ1PJ-F 5 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 7.2. Pin Layout and PIN Descriptions Table 2 Terminal Configurations Pin NO. Terminal Name Type VDDIO or pad voltage Connection to IC terminal Description 1 GND Ground - - Ground 2 VBUCK_GND_PM Ground - VBUCK_GND_PM Ground for internal 1.1 V regulator 3 PWM_PM O 1.1V PWM_PM SWREG PMU 1.1V output. 4 VDD11_PM I 1.1V VDD11_PM 1.1 V voltage feedback to SWREG PMU. 5 GND Ground - - Ground 6 SDIO_DATA3 I/O VDDIO_SDIO SDIO_D3 SDIO data bus D3 7 SDIO_DATA2 I/O VDDIO_SDIO SDIO_D2 SDIO data bus D2 8 SDIO_DATA1 I/O VDDIO_SDIO SDIO_D1 SDIO data bus D1 9 SDIO_DATA0 I/O VDDIO_SDIO SDIO_D0 SDIO data bus D0 10 SDIO_CMD I VDDIO_SDIO SDIO_CMD SDIO CMD line signal 11 SDIO_CLK OD(1) VDDIO_SDIO SDIO_CLK SDIO clock signal 12 VDDIO_SDIO Power 1.8V or 3.3V VDDIO_SDIO Voltage supply for SDIO 13 SDIO_INTERRUPT_L O VDDIO_SDIO SDIO_INTERRUPT_L SDIO interrupt signal 14 GND Ground - - Ground 15 32KHz_CLK_IN I VDDIO_GPIO2 LF_CLK_IN External low–power 32.768 kHz clock input 16 VDDIO_GPIO2 Power 1.8V or 3.3V VDDIO_GPIO2 Voltage supply 17 HCI_UART_WAKEHOST OD(1) VDDIO_GPIO2 HCI_UART_WAKEHOST Bluetooth wakeup host. Active high 18 WLAN_RF_KILL_L I VDDIO_GPIO2 WLAN_RFKILL_L Turn off WLAN RF analog and front–end. Active low. 19 GND Ground - - Ground 20 2G_WIFI/BT_RF_OUT A,O - - 2G WIFI and BT output 21 GND Ground - - Ground 22 2G_WIFI/BT_RF_IN A, I - - 2G WIFI and BT input 23 GND Ground - - Ground 24 ANT A, I/O - - RF Transmit / Receive Antenna 25 GND Ground - - Ground Top View
Preliminary Specification Number : SP-ZZ1PJ-F 6 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 26 3D_FRAME_SYNC I VDDIO_GPIO1 3D_FRAME_SYNC Frame sync signal from TV to sync with 3D glass via Bluetooth. 27 HCI_UART_RXD I VDDIO_GPIO1 HCI_UART_RXD UART RXD signal 28 HCI_UART_TXD O VDDIO_GPIO1 HCI_UART_TXD UART TXD signal 29 HCI_UART_RTS O VDDIO_GPIO1 HCI_UART_RTS UART RTS signal 30 HCI_UART_CTS I VDDIO_GPIO1 HCI_UART_CTS UART CTS signal 31 PCM_CLK I VDDIO_GPIO1 BT_I2S_SCK Bluetooth PCM_CLK signal 32 PCM_SYNC I/O VDDIO_GPIO1 BT_I2S_WS Bluetooth PCM_SYNC signal 33 PCM_IN OD(1) VDDIO_GPIO1 BT_I2S_SDI Bluetooth PCM_IN signal 34 PCM_OUT O VDDIO_GPIO1 BT_I2S_SDO Bluetooth PCM_OUT signal 35 GND Ground - - Ground 36 VDDIO_XTAL Power 1.8V or 3.3V VDDIO_XTAL Voltage supply for XTAL 37 VDDIO_GPIO1 Power 1.8V or 3.3V VDDIO_GPIO1 Voltage supply 38 GND Ground - - Ground 39 WLAN_EN I VDDIO_AO WL_EN WLAN enable. Active high 40 BT_EN I VDDIO_AO BT_EN Bluetooth enable. Active high 41 VDD_3P3 Power 3.3V VDD33_PM 3.3 V input voltage 42 VDDIO_AO Power 1.8V or 3.3V VDDIO_AO_PM Always–on I/O supply for power management and real–time clock. This supply must be present if any other supply is present. 43 GND Ground - - Ground 44 LTE_UART_RXD I VDDIO_GPIO1 LTE_UART_RXD LTE coexistence signal. LTE_UART_RXD or LTE_FS. 45 LTE_UART_TXD O VDDIO_GPIO1 LTE_UART_TXD LTE co– existence signal. LTE_UART_TXD or LTE_PRI. 46 CLK_REQ O VDDIO_GPIO1 CLK_REQ Clock request output 47 DBG_UART_TXD OD(1) VDDIO_AO GPIO[19] DBG_UART_TXD 48 DBG_UART_RXD OD(1) VDDIO_GPIO2 GPIO[18] DBG_UART_RXD 49 QOW OD(1) VDDIO_GPIO2 QOW This signal can be used to enable for external Wireless charging UART circuit. 50~ 62 GND Ground - - Ground (1) OD means this PIN is a digital output signal with open drain, an external pull-up or pull-down resistor is needed when this PIN is used.
Preliminary Specification Number : SP-ZZ1PJ-F 7 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 7.3. Marking Marking Meaning A Pin 1 Marking B Inspection Number C Module P/N D Murata Logo
Preliminary Specification Number : SP-ZZ1PJ-F 8 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 8. ABSOLUTE MAXIMUM RATINGS*1) Parameter min. max. Unit Storage Temperature TBD TBD deg.C Supply Voltage VDD_3P3 -0.3 3.65 V VDDIO_SDIO VDDIO_GPIO1 VDDIO_GPIO2 VDDIO_XTAL VDDIO_AO -0.3 3.6 V *1) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. No damage assuming only one parameter is set at limit at a time with all other parameters are set within operating condition. 9. OPERATING CONDITION*2) Parameter min. typ. max. unit Operating Temperature -40 - 85 deg.C Specification Temperature range TBD TBD TBD deg.C Supply Voltage VDD_3P3 3.135 3.3 3.465 V VDDIO_SDIO VDDIO_GPIO1 VDDIO_GPIO2 VDDIO_XTAL VDDIO_AO 1.71 1.8 or 3.3 3.46 V *2) Functionality is guaranteed but the specifications require the derating at over-temperatures, over-voltage condition. 10. External low–power 32.768 kHz clock TBD
Preliminary Specification Number : SP-ZZ1PJ-F 9 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 11. POWER ON SEQUENCE 11.1. Case 1: 3.3 V power down after 1.8 V If the battery source can be removed from the end user device (battery removed, AC/DC plugged in), this is the recommended power sequence. It will avoid violating the power off sequence by allowing the 3.3 V rail to shut down after the 1.8 V rail. Notes: 1. VDDIO_GPIO voltage should match VIO voltage from the host. In some applications, VDDIO_GPIO may connected to 3.3 V upon Host VIO voltage. 2. In this case, both WLAN_EN and BT_EN on the 1PJ are at 3.3 V due to using the VDD_AO power rail. If the host VIO voltage is 1.8 V, it must have level shifters to interface with host. 3. All host interface signals must stay floating or low before valid power on sequence (WLAN_EN and BT-EN goes high). Symbol Parameter Min Max Units ta1 No requirement if VDDIO_AO connected to 3.3 V 0 - μs ta2 90% of 3.3 V to 10% of 1.8 V 0 0 μs ta3 90% of VDDIO_GPIO to 0.7 V of both WLAN_EN and BT_EN 10 - μs ta4 WLAN_EN valid to LF_CLK_IN input 0 - μs ta5 WLAN_EN valid to VDD11AO_PM_OUT established - 50 μs ta6 WLAN_EN to DVDD11 - 3.5 ms ta7 WLAN_EN to AVDD11 - 4 ms VDD_3.3 (3.3V)
Preliminary Specification Number : SP-ZZ1PJ-F 10 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. ta8 AVDD11 to XTAL clock stable 1 - ms ta9 WLAN_EN de-assert (“low”) to LF_CLK_IN de-assert (tristate or low) 0 - μs ta10 Both WLAN_EN = low and BT_EN = low to 90% of 1.8 V 10 - μs ta11 3.3 V always higher than 1.8 V during operation, with power off by removing battery or unplugging AC/DC 0 - μs ta12 VDDIO_AO and VDDIO_XTAL should be connected to 3.3 V power rail 0 - μs 11.2. Case 2: 1.8 V power down after 3.3 V If the battery source cannot be removed from the end user device, this is the recommended power sequence for this application. This sequence allows the software to control the power on/off sequence. Notes: 1. VDDIO_GPIO voltage should match VIO voltage from the host. In some applications, VDDIO_GPIO may connected to 3.3 V upon host VIO voltage. 2. Both WLAN_EN and BT_EN of 1PJ are 1.8 V. If host VIO voltage is 1.8 V, it does not need level shifter to interface with host. 3. All host interface signals must stay floating or low before WLAN_EN/BT_EN =”high”, and after WLAN_EN/BT_EN = Low. Symbol Parameter Min Max Units tb1 No requirement if VDDIO_AO connected to 1.8 V 0 - μs tb2 90% of 1.8 V to 10% of 3.3 V 0 - μs tb3 90% of 3.3 V to 0.7 V of both WLAN_EN and BT_EN 10 - μs VDD_3.3 (3.3V)
Preliminary Specification Number : SP-ZZ1PJ-F 11 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. tb4 WLAN_EN valid to LF_CLK_IN input 0 - μs tb5 WLAN_EN valid to VDD11AO_PM_OUT established - 50 μs tb6 WLAN_EN to DVDD11 - 3.5 ms tb7 WLAN_EN to AVDD11 4 ms tb8 AVDD11 to XTAL clock stable 1 - ms tb9 WLAN_EN de-assert (“low”) to LF_CLK_IN de-assert (tristate or low) 0 - μs tb10 Both WLAN_EN = low and BT_EN = low to 90% of 3.3 V 10 - μs tb11 10% of 3.3 V to 90% of 1.8 V 0 - μs tb12 VDDIO_AO and VDDIO_XTAL should be connected to 1.8 V power rail 0 - μs 11.3. Case 3: All power rails supplied with 3.3 V All power pins are connected to 3.3 V only include VDDIO_AO, VDDIO_XTAL, VDDIO_GPIOx. Notes: All host signals are either GND or floating before WLAN_EN/BT_EN =”high”, and after WLAN_EN/BT_EN = Low. Symbol Parameter Min Max Units tc1 90% of 3.3 V to 0.7 V of both WLAN_EN and BT_EN 0 - μs tc4 WLAN_EN valid to LF_CLK_IN input 0 - μs tc5 WLAN_EN valid to VDD11AO_PM_OUT established - 50 μs tc6 WLAN_EN to DVDD11 - 3.5 ms tc7 WLAN_EN to AVDD11 - 4 ms VDD_3.3 (3.3V)
Preliminary Specification Number : SP-ZZ1PJ-F 12 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. tc8 AVDD11 to XTAL clock stable 1 - ms tc9 WLAN_EN de-assert (“low”) to LF_CLK_IN de-assert (tristate or low) 0 - μs tc10 Both WLAN_EN = low and BT_EN = low to 90% of 3.3 V 10 - μs 12. Digital I/O Requirements TBD 13. INTERFACE TIMING AND AC CHARACTERISTICS 13.1. Bluetooth UART Timing TBD 13.2. I2S Timing TBD 13.3. SDIO Timing TBD
Preliminary Specification Number : SP-ZZ1PJ-F 13 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 14. DC / RF Characteristics 14.1. DC/RF Characteristics for IEEE802.11b - 2.4GHz Specification IEEE802.11b Mode DSSS / CCK Frequency 2412 to 2472 MHz Data rate 1, 2, 5.5, 11Mbps Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=19 dBm, 11Mbps mode unless otherwise specified. Items Contents - DC Characteristics - min. typ. max. unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *4) *5) - 330 - mA 2) Rx mode - 60 - mA - Tx Characteristics - min. typ. max. unit 2. Output Power - 19 - dBm 3. Spectrum Mask margin 1) 1st side lobes(-30dBr) 0 - - dB 2) 2nd side lobes(-50dBr) 0 - - dB 4. Power-on and Power-down ramp - 2.0 μsec 5. RF Carrier Suppression 15 - - dB 6. Modulation Accuracy (EVM) - - 35 % 7.Frequency tolerance -20 - 20 ppm 8. Out band Spurious Emissions 1) 30-1000MHz - - -36 dBm 2) 1000-12750MHz - - -30 dBm 3) 1800-1900MHz -47 dBm 4) 5150-5300MHz - - -47 dBm - Rx Characteristics - min. typ. max. unit 9. Minimum Input Level Sensitivity - -89 -76 dBm 10. Maximum Input Level (PER < 8%) -10 - - dBm 11. Adjacent Channel Rejection (FER < 8%) 35 - - dB *4): Defined when output power setting is 19 dBm at Murata module antenna pad *5): Data rate is 1Mbps
Preliminary Specification Number : SP-ZZ1PJ-F 14 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 14.2. DC/RF Characteristics for IEEE802.11g - 2.4GHz Specification IEEE802.11g Mode OFDM Frequency 2412 to 2472 MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=17 dBm, 54Mbps mode unless otherwise specified. Items Contents - DC Characteristics - min. typ. max. unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *6) *7) - 310 - mA 2) Rx mode - 60 - mA - Tx Characteristics - min. typ. max. unit 2. Output Power - 17 - dBm 3. Spectrum Mask margin 1) 9MHz to 11MHz (0~ -20dBr) 0 - - dB 2) 11MHz to 20MHz (-20~ -28dBr) 0 - - dB 3) 20MHz to 30MHz (-28~ -40dBr) 0 - - dB 4) 30MHz to 33MHz (-40dBr) 0 - - dB 4. Constellation Error (EVM) - - -25 dB 5.Frequency tolerance -20 - 20 ppm 6. Out band Spurious Emissions 1) 30-1000MHz - - -36 dBm 2) 1000-12750MHz - - -30 dBm 3) 1800-1900MHz -47 dBm 4) 5150-5300MHz - - -47 dBm - Rx Characteristics - min. typ. max. unit 7. Minimum Input Level Sensitivity - -74 -65 dBm 8. Maximum Input Level (PER < 10%) -20 - - dBm 9. Adjacent Channel Rejection (PER < 10%) -1 - - dB *6): Defined when output power setting is 18dBm at Murata module antenna pad *7): Data rate is 6Mbps
Preliminary Specification Number : SP-ZZ1PJ-F 15 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 14.3. DC/RF Characteristics for IEEE802.11n – 2.4GHz Specification IEEE802.11n Mode OFDM Frequency 2412 to 2472 MHz Data rate MCS0-MCS7 Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=16 dBm, BW=20MHz, MCS7 unless otherwise specified. - DC Characteristics - min. typ. max. unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *8)*9) - 310 - mA 2) Rx mode - 60 - mA - Tx Characteristics - min. typ. max. unit 2. Output Power - 16 - dBm 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 0 - - dB 2) 11MHz to 20MHz (-20 ~ -28dBr) 0 - - dB 3) 20MHz to 30MHz (-28 ~ -45dBr) 0 - - dB 4) 30MHz to 33MHz (-45dBr) 0 - - dB 4. Constellation Error (EVM) - - -27 dB 5.Frequency tolerance -20 - 20 ppm 6. Out band Spurious Emissions 1) 30-1000MHz - - -36 dBm 2) 1000-12750MHz - - -30 dBm 3) 1800-1900MHz -47 dBm 4) 5150-5300MHz - - -47 dBm - Rx Characteristics - min. typ. max. unit 6. Minimum Input Level Sensitivity - -71 -64 dBm 7. Adjacent Channel Rejection (PER < 10%) -2 - - dB *8): Defined when output power setting is 18 dBm at Murata module antenna pad *9): Data rate is MCS0
Preliminary Specification Number : SP-ZZ1PJ-F 16 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 14.4. DC/RF Characteristics for IEEE802.11ac – 2.4GHz Specification IEEE802.11ac Mode OFDM Frequency 2412 to 2472 MHz Data rate MCS0-MCS9 Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=14 dBm, MCS9,BW=40MHz unless otherwise specified. - DC Characteristics - min. typ. max. unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *8)*9) - 290 - mA 2) Rx mode - 62 - mA - Tx Characteristics - min. typ. max. unit 2. Output Power - 14 - dBm 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 0 - - dB 2) 11MHz to 20MHz (-20 ~ -28dBr) 0 - - dB 3) 20MHz to 30MHz (-28 ~ -45dBr) 0 - - dB 4) 30MHz to 33MHz (-45dBr) 0 - - dB 4. Constellation Error (EVM) - - -32 dB 5.Frequency tolerance -20 - 20 ppm 6. Out band Spurious Emissions 1) 30-1000MHz - - -36 dBm 2) 1000-12750MHz - - -30 dBm 3) 1800-1900MHz -47 dBm 4) 5150-5300MHz - - -47 dBm - Rx Characteristics - min. typ. max. unit 6. Minimum Input Level Sensitivity - -63 -54 dBm 7. Adjacent Channel Rejection (PER < 10%) -2 - - dB *8): Defined when output power setting is 16 dBm at Murata module antenna pad *9): Data rate is MCS0
Preliminary Specification Number : SP-ZZ1PJ-F 17 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 14.5. DC/RF Characteristics for IEEE802.11a - 5GHz Specification IEEE802.11a Mode OFDM Frequency 5180 to 5825MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 11 dBm, 54Mbps unless otherwise specified. - DC Characteristics - min. typ. max. unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *8)*9) - 420 - mA 2) Rx mode - 80 - mA - Tx Characteristics - min. typ. max. unit 2. Output Power - 11 - dBm 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 0 - - dB 2) 11MHz to 20MHz (-20 ~ -28dBr) 0 - - dB 3) 20MHz to 30MHz (-28 ~ -45dBr) 0 - - dB 4) 30MHz to 33MHz (-45dBr) 0 - - dB 4. Constellation Error (EVM) - - -25 dB 5.Frequency tolerance -20 - 20 ppm 6. Out band Spurious Emissions 1) 30-1000MHz - - -36 dBm 2) 1000-12750MHz - - -30 dBm 3) 1800-1900MHz -47 dBm 4) 5150-5300MHz - - -47 dBm - Rx Characteristics - min. typ. max. unit 6. Minimum Input Level Sensitivity - -71 -65 dBm 7. Adjacent Channel Rejection (PER < 10%) -1 - - dB *8): Defined when output power setting is 14 dBm at Murata module antenna pad *9): Data rate is 6Mbps
Preliminary Specification Number : SP-ZZ1PJ-F 18 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 14.6. DC/RF Characteristics for IEEE802.11n - 5GHz Specification IEEE802.11n Mode OFDM Frequency 5180 to 5825MHz Data rate MCS0-MCS7 Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 10 dBm, BW=20MHz ,MCS7 unless otherwise specified. - DC Characteristics - min. typ. max. unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *8)*9) - 420 - mA 2) Rx mode - 80 - mA - Tx Characteristics - min. typ. max. unit 2. Output Power - 10 - dBm 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 0 - - dB 2) 11MHz to 20MHz (-20 ~ -28dBr) 0 - - dB 3) 20MHz to 30MHz (-28 ~ -45dBr) 0 - - dB 4) 30MHz to 33MHz (-45dBr) 0 - - dB 4. Constellation Error (EVM) - - -32 dB 5.Frequency tolerance -20 - 20 ppm 6. Out band Spurious Emissions 1) 30-1000MHz - - -36 dBm 2) 1000-12750MHz - - -30 dBm 3) 1800-1900MHz -47 dBm 4) 5150-5300MHz - - -47 dBm - Rx Characteristics - min. typ. max. unit 6. Minimum Input Level Sensitivity - -69 -64 dBm 7. Adjacent Channel Rejection (PER < 10%) -2 - - dB *8): Defined when output power setting is 14 dBm at Murata module antenna pad *9): Data rate is MCS0
Preliminary Specification Number : SP-ZZ1PJ-F 19 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 14.7. DC/RF Characteristics for IEEE802.11ac - 5GHz Specification IEEE802.11ac Mode OFDM Frequency 5210 to 5775MHz Data rate MCS0-MCS9 Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 8 dBm, BW=80MHz ,MCS9 unless otherwise specified. - DC Characteristics - min. typ. max. unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *8)*9) - 370 - mA 2) Rx mode - 90 - mA - Tx Characteristics - min. typ. max. unit 2. Output Power - 8 - dBm 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 0 - - dB 2) 11MHz to 20MHz (-20 ~ -28dBr) 0 - - dB 3) 20MHz to 30MHz (-28 ~ -45dBr) 0 - - dB 4) 30MHz to 33MHz (-45dBr) 0 - - dB 4. Constellation Error (EVM) - - -32 dB 5.Frequency tolerance -20 - 20 ppm 6. Out band Spurious Emissions 1) 30-1000MHz - - -36 dBm 2) 1000-12750MHz - - -30 dBm 3) 1800-1900MHz -47 dBm 4) 5150-5300MHz - - -47 dBm - Rx Characteristics - min. typ. max. unit 6. Minimum Input Level Sensitivity - -59 -51 dBm 7. Adjacent Channel Rejection (PER < 10%) -2 - - dB *8): Defined when output power setting is 12dBm at Murata module antenna pad *9): Data rate is MCS0
Preliminary Specification Number : SP-ZZ1PJ-F 20 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 14.8. DC/RF Characteristics for Bluetooth Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Items Contents Bluetooth specification (power class) Version 2.1 + EDR (Class1) Channel frequency (spacing) 2402 to 2480 MHz (1MHz) Current Consumption Min. Typ. Max. unit (a) Tx=DH5 - 55 - mA (b) Tx=2DH5 - 50 - mA (c) Tx=3DH5 - 50 - mA (d) Rx=DH5 - 22 - mA (e) Rx=2DH5 - 22 - mA (f) Rx=3DH5 - 22 - mA Transmitter Min. Typ. Max. Unit Output Power@DH5 - 9 - dBm Frequency range 2402 - 2480 MHz 20dB bandwidth - 950 1000 MHz Adjacent Channel Power *1 (a) [M-N] =2 - - -20 dBm (b) [M-N] ≥3 - - -40 dBm Modulation characteristics (a) Modulation Δf1avg 140 - 175 kHz (b) Modulation Δf2max 115 - kHz (c) Modulation Δf2avg / Δf1avg 0.8 - - Carrier Frequency Drift (a) 1slot -25 - +25 kHz (b) 3slot / 5slot -40 - +40 kHz (c) Maximum drift rate - 20 kHz/50us EDR Relative Power -4 - +1 dB EDR Carrier Frequency Stability and Modulation Accuracy (a) ωi -75 - +75 kHz (b) ωi+ωo -75 - +75 kHz (c) ωo -10 - +10 kHz (d) RMS DEVM (DQPSK) - - 20 % (e) Peak DEVM (DQPSK) - - 35 % (f) 99% DEVM (DQPSK) - - 30 % (g) RMS DEVM (8DPSK) - - 13 % (h) Peak DEVM (8DPSK) - - 25 % (i) 99% DEVM (8DPSK) - - 20 % Spurious Emissions (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver Min. Typ. Max. unit BDR Sensitivity (BER<0.1%) - -92 -80 dBm EDR Sensitivity (BER<0.007%)@8DPSK - -87 -77 dBm C/I Performance (BER<0.1%) *2 (a) co-channel - - 11 dB (b) 1MHz - - 0 dB (c) 2MHz - - -30 dB (d) 3MHz - - -40 dB (e) image (+4MHz) - - -9 dB (f) image +/- 1MHz - - -20 dB
Preliminary Specification Number : SP-ZZ1PJ-F 21 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. Maximum Input Level (BER<0.1%) -20 - - dBm *1: Up to three spurious responses within Bluetooth limits are allowed. *2: Up to five spurious responses within Bluetooth limits are allowed. 14.9. DC/RF Characteristics for Bluetooth (LE) Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Items Contents Bluetooth specification (power class) Version 4.1(LE) Channel frequency (spacing) 2402 to 2480 MHz (2MHz) Number of RF Channel 40 Item / Condition Min. Typ. Max. Unit Center Frequency 2402 - 2480 MHz Channel Spacing - 2 - MHz Number of RF channel - 40 - - Output power - 4 10 dBm Modulation Characteristics 1) Δf1avg 225 - 275 kHz 2) Δf2max (at 99.9%) 185 - - kHz 3) Δf2avg / Δf1avg 0.8 - - - Carrier frequency offset and drift 1) Frequency offset - - 150 kHz 2) Frequency drift - - 50 kHz 3) Drift rate - - 20 kHz Receiver sensitivity (PER < 30.8%) - -96 -70 dBm Maximum input signal level (PER < 30.8%) -10 - - dBm PER Report Integrity (-30dBm input) 50 - 65.4 %
Preliminary Specification Number : SP-ZZ1PJ-F 22 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 15. LAND PATTERN (TOP VIEW) <Top View> ***Stencil design: For 0.3×0.55mm electrodes, stencil pad is 0.24mm*0.44mm and should put in the center of the each conductor. For 0.8×0.8mm electrodes, stencil pad is 0.66mm*0.66mm and should put in the center of the each conductor. ***This is based on Murata’s condition using the thickness of the stencil 100 um. So this is just the recommendation and needs to modify based on your condition.
Preliminary Specification Number : SP-ZZ1PJ-F 23 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 16. REFERENCE CIRCUIT SDIO_CMDLBEE5ZZ1PJ-164GND1VBUCK_GND_PM2PWM_PM3VDD11_PM4GND5SDIO_DATA36SDIO_DATA27SDIO_DATA18SDIO_DATA09GND43LTE_UART_RXD 44LTE_UART_TXD 45CLK_REQ 46DBG_UART_TXD 47DBG_UART_RXD 48QOW 49GND502G_WIFI/BT_RF_IN 22GND 23ANT 24GND 253D_FRAME_SYNC 26HCI_UART_RXD 27HCI_UART_TXD 28HCI_UART_RTS 29HCI_UART_CTS 30GND51 GND52 GND53 GND54 GND55 GND56 GND57 GND58GND59GND60GND61GND62PCM_CLK 31PCM_SYNC 32PCM_IN 33PCM_OUT 34GND35VDDIO_XTAL36VDDIO_GPIO137GND38WLAN_EN 39BT_EN 40VDD_3P341VDDIO_AO42SDIO_CMD10SDIO_CLK11VDDIO_SDIO12SDIO_INTERRUPT_L13GND1432KHZ_CLK_IN15VDDIO_GPIO216HCI_UART_WAKEHOST 17WLAN_RF_KILL_L 18GND 192G_WIFI/BT_RF_OUT 20GND 21BT_UART_CTSBT_UART_RTSBT_UART_RXDBT_UART_TXDLTE_UART_TXDLTE_UART_RXDWL_DEV_WAKEUP_HOST32KHz Clock inC747uFDBG_UART_TXDDBG_UART_RXDBT_PCM_OUTJ3RF-SOCKET_023415SMA connectorBT_DEV_WAKEUP_HOSTR1010KBT_PCM_SY NCBT_ENBT_PCM_CLKSDIO_CLKBT_PCM_INWLAN_EN1. VDD_3V3 is powered by 3.3V typically.2. VDDIO_AO, VDDIO_GPIO1, VDDIO_GPIO2, VDDIO_XTAL, VDDIO_SDIO can be powered by 1.8V or 3.3V. It should match the VIO voltage from host. For the each I/O voltage group of 1PJ module, please refer to 1PJ module datasheet.Notes for the power supply voltage:WLAN_ENOQWR510KR17 0RR13NUVDDIO_AOR12NUR11NUR310KR8 27C20.1uFR710KVDDIO_GPIO2BT_HOST_WAKEUP_DEV/3D_FRAME_SYNCTOLERANCE = 20%L1 1.5uHVDDIO_AOC31uFVDD_3V3VDDIO_GPIO1VDDIO_GPIO2WLAN ResetVDDIO_XTALJ2CON212R910KVDDIO_GPIO1WLAN_RF_KILL_LVDDIO_SDIOCLK_REQR610KVDDIO_AOR410KVDDIO_GPIO2R15NUR1410KSDIO_DATA3SW2 SKQY A1 2SDIO_DATA2VDDIO_SDIOSDIO_DATA1R2 27BT_ENR110KC10.1uFBT Reset VDDIO_AO SW1 SKQY A1 2J1CON212R16 0RSDIO_DATA0VDDIO_GPIO1VDDIO_SDIOVDDIO_XTALVDDIO_GPIO2VDDIO_AOC110.1uFC1010uFC61uFC52.2uFC410uFC81uFC91uFC13NUVDD_3V3C12NU
Preliminary Specification Number : SP-ZZ1PJ-F 24 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 17. TAPE AND REEL PACKING (1) Dimensions of Tape (Plastic tape) Unit: mm W 16+/-0.2 P2 2+/-0.1 F 7.5+/-0.1 A0 7.8+/-0.1 T 0.3+/-0.05 B0 7.6+/-0.1 E 1.75+/-0.1 K0 1.25+/-0.1 P 12+/-0.1 D0 1.5+0.1/-0 P0 4+/-0.1 D1 1.5+/-0.1 (2) Dimensions of Reel Unit: mm W1 25.5 +/-1.0 W2 29.5 +/-1.0 Feeding direction
Preliminary Specification Number : SP-ZZ1PJ-F 25 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. (3) Taping Diagrams [1] Feeding Hole : As specified in (1) [2] Hole for chip : As specified in (1) [3] Cover tape : 62 um in thickness [4] Base tape : As specified in (1) (4) Leader and Tail tape Feeding Hole Chip Feeding Direction [2][3][4][3][1]160 to 190 mm Tail tape (No components) Components No components Feeding direction Leader tape (Cover tape alone) 150mm min. 250 mm min.
Preliminary Specification Number : SP-ZZ1PJ-F 26 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. -The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. -The cover tape and base tape are not adhered at no components area for 250 mm min. -Tear off strength against pulling of cover tape: 5 N min. -Packaging unit: 1000 pcs/ reel - Material: Base tape: Plastic Reel : Plastic Cover tape, cavity tape and reel are made the anti-static processing. - Peeling of force: 1.1 N max. in the direction of peeling as shown below. - PACKAGE (Humidity proof packing) Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant and the humidity indicator. 　 湿度イ ン ジ ケ－タ乾燥剤表示ラ べル防湿梱包袋表示ラ ベルLabel Label Desiccant Humidity Indicator Anti-humidity Plastic Bag 165 to 180 ° 1.1 N max. Base tape Cover tape
Preliminary Specification Number : SP-ZZ1PJ-F 27 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 18. NOTICE 18.1. Storage Conditions: Please use this product within 6month after receipt. - The product shall be stored without opening the packing under the ambient temperature from 5 to 35deg.C and humidity from 20 to 70%RH. (Packing materials, in particular, may be deformed at the temperature over 40deg.C.) - The product left more than 6months after reception, it needs to be confirmed the solderbility before used. - The product shall be stored in non corrosive gas (Cl2, NH3, SO2, Nox, etc.). - Any excess mechanical shock including, but not limited to, sticking the packing materials by sharp object and dropping the product, shall not be applied in order not to damage the packing materials. This product is applicable to MSL3 (Based on JEDEC Standard J-STD-020) - After the packing opened, the product shall be stored at <30deg.C / <60%RH and the product shall be used within 168hours. - When the color of the indicator in the packing changed, the product shall be baked before soldering. Baking condition: 125+5/-0deg.C, 24hours, 1time The products shall be baked on the heat-resistant tray because the material (Base Tape, Reel Tape and Cover Tape) are not heat-resistant. 18.2. Handling Conditions: Be careful in handling or transporting products because excessive stress or mechanical shock may break products. Handle with care if products may have cracks or damages on their terminals, the characteristics of products may change. Do not touch products with bear hands that may result in poor solder ability and destroy by static electrical charge. 18.3. Standard PCB Design (Land Pattern and Dimensions): All the ground terminals should be connected to the ground patterns. Furthermore, the ground pattern should be provided between IN and OUT terminals. Please refer to the specifications for the standard land dimensions. The recommended land pattern and dimensions is as Murata's standard. The characteristics of products may vary depending on the pattern drawing method, grounding method, land dimensions, land forming method of the NC terminals and the PCB material and thickness. Therefore, be sure to verify the characteristics in the actual set. When using non-standard lands, contact Murata beforehand. 18.4. Notice for Chip Placer: When placing products on the PCB, products may be stressed and broken by uneven forces from a worn-out chucking locating claw or a suction nozzle. To prevent products from damages, be sure to follow the specifications for the maintenance of the chip placer being used. For the positioning of products on the PCB, be aware that mechanical chucking may damage products.
Preliminary Specification Number : SP-ZZ1PJ-F 28 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 18.5. Soldering Conditions: The recommendation conditions of soldering are as in the following figure. When products are immersed in solvent after mounting, pay special attention to maintain the temperature difference within 100 °C. Soldering must be carried out by the above mentioned conditions to prevent products from damage. Set up the highest temperature of reflow within 260 °C. Contact Murata before use if concerning other soldering conditions. Reflow soldering standard conditions(Example) Please use the reflow within 2 times. Use rosin type flux or weakly active flux with a chlorine content of 0.2 wt % or less. 18.6. Cleaning: Since this Product is Moisture Sensitive, any cleaning is not permitted. 18.7. Operational Environment Conditions: Products are designed to work for electronic products under normal environmental conditions (ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above-mentioned. However, if products are used under the following circumstances, it may damage products and leakage of electricity and abnormal temperature may occur. - In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.). - In an atmosphere containing combustible and volatile gases. - Dusty place. - Direct sunlight place. - Water splashing place. - Humid place where water condenses. - Freezing place. If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use. As it might be a cause of degradation or destruction to apply static electricity to products, do not apply Within 120s Pre-heating time(s) 220 deg.C Within 60s Cooling down Slowly 180 deg.C 150 deg.C 235 to 245 deg.C Within 3s
Preliminary Specification Number : SP-ZZ1PJ-F 29 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. static electricity or excessive voltage while assembling and measuring. 18.8. Input Power Capacity: Products shall be used in the input power capacity as specified in this specifications. Inform Murata beforehand, in case that the components are used beyond such input power capacity range.
Preliminary Specification Number : SP-ZZ1PJ-F 30 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 19. PRECONDITION TO USE OUR PRODUCTS PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the products is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The product shall not be used in any application listed below which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS. - Aircraft equipment. - Aerospace equipment - Undersea equipment. - Power plant control equipment - Medical equipment. - Transportation equipment (vehicles, trains, ships, elevator, etc.). - Traffic signal equipment. - Disaster prevention / crime prevention equipment. -Burning / explosion control equipment - Application of similar complexity and/ or reliability requirements to the applications listed in the above. We expressly prohibit you from analyzing, breaking, reverse-engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. By signing on specification sheet or approval sheet, you acknowledge that you are the legal representative for your company and that you understand and accept the validity of the contents herein. When you are not able to return the signed version of specification sheet or approval sheet within 30 days from receiving date of specification sheet or approval sheet, it shall be deemed to be your consent on the content of specification sheet or approval sheet. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by - the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the product to be sold by you, -deviation or lapse in function of engineering sample, -improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you can’t agree the above contents, you should inquire our sales.
Preliminary Specification Number : SP-ZZ1PJ-F 31 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. Appendix
Preliminary Specification Number : SP-ZZ1PJ-F 32 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. LBEE5ZZ1PJ Installation Manual (FCC) FCC ID of this module is as follows; FCC ID: VPYLB1PJ For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statement required by FCC on the product and in the installation manual Notice. Contents 1. Theory of operation 2. Antenna 3. Notice 1. Theory of operation Frequency of operation Scan Ad-hoc mode 2.4GHz 802.11b/g/n-HT20 2412MHz – 2462MHz (ch1 – ch11) Active Yes 802.11n-HT40 2422MHz – 2452MHz (ch3 – ch9) Active Yes W52 802.11a/n-HT20/ac-VHT-20 5180MHz – 5240MHz (ch36 – ch48) Active Yes 802.11n-HT40/ac-VHT-40 5190MHz – 5239MHz (ch38 – ch46) Active Yes 802.11ac-VHT80 5210MHz (ch42) Active Yes W53 802.11a/n-HT20/ac-VHT-20 5260MHz – 5320MHz (ch52 – ch64) Passive No 802.11n-HT40/ac-VHT-40 5270MHz – 5310MHz (ch54 – ch62) Passive No 802.11ac-VHT80 5290MHz (ch58) Passive No W56 802.11a/n-HT20/ac-VHT-20 5500MHz – 5720MHz (ch100 – ch144) Passive No 802.11n-HT40/ac-VHT-40 5510MHz – 5710MHz (ch102 – ch142) Passive No 802.11ac-VHT80 5530MHz – 5690MHz (ch106 – ch138) Passive No W58 802.11a/n-HT20/ac-VHT-20 5745MHz – 5825MHz (ch149 – ch165) Active Yes 802.11n-HT40/ac-VHT-40 5755MHz – 5795MHz (ch151 – ch159) Active Yes 802.11ac-VHT80 5775MH (ch155) Active Yes The device cannot operate in 5600MHz~5650MHz band in Canada Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: ± 20ppm End users cannot modify the software because F/W & driver are installed in device.
Preliminary Specification Number : SP-ZZ1PJ-F 33 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 2. Antenna ■Please refer to KDB 996369 ■Please perform the antenna design that followed the specifications of the antenna. ■About the signal line between an antenna and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points. 1) It is the same type as the antenna type of antenna specifications. 2) An antenna gain is lower than a gain given in antenna specifications. 3) The emission level is not getting worse. ■50-ohm feed line(microstrip line length) Antenna Antenna type PCB Antenna 50-ohm feed line length We test it at 26.4mm as a representative 3. Notice For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains Transmitter Module FCC ID: VPYLB1PJ or Contains FCC ID: VPYLB1PJ ●Please describe the following warning to the manual. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. ※When the product is small, as for these words mentioned above, the posting to a manual is possible. ●When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. RF Exposure requirements are met when installed in mobile equipment. This module cannot be installed in portable equipment without further testing and a change to FCC's grant of authorization. Contact Murata regarding portable applications. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm.
Preliminary Specification Number : SP-ZZ1PJ-F 34 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3) The use of an antenna with gain less than 3.1 dBi(2.4GHz) and 2.8 dBi(5GHz). As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: VPYLB1PJ ”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Preliminary Specification Number : SP-ZZ1PJ-F 35 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. LBEE5ZZ1PJ Installation Manual (IC) IC No. of this device is as follows; IC: 772C-LB1PJ For OEM integration only – device cannot be sold to general public. Therefore, we will ask OEM to include the following statements required by IC on the product and in the installation manual Notice. Contents 1. Theory of operation 2. Antenna 3. Notice 1. Theory of operation Frequency of operation Scan Ad-hoc mode 2.4GHz 802.11b/g/n-HT20 2412MHz – 2462MHz (ch1 – ch11) Active Yes 802.11n-HT40 2422MHz – 2452MHz (ch3 – ch9) Active Yes W52 802.11a/n-HT20/ac-VHT-20 5180MHz – 5240MHz (ch36 – ch48) Active Yes 802.11n-HT40/ac-VHT-40 5190MHz – 5239MHz (ch38 – ch46) Active Yes 802.11ac-VHT80 5210MHz (ch42) Active Yes W53 802.11a/n-HT20/ac-VHT-20 5260MHz – 5320MHz (ch52 – ch64) Passive No 802.11n-HT40/ac-VHT-40 5270MHz – 5310MHz (ch54 – ch62) Passive No 802.11ac-VHT80 5290MHz (ch58) Passive No W56 802.11a/n-HT20/ac-VHT-20 5500MHz – 5720MHz (ch100 – ch144) Passive No 802.11n-HT40/ac-VHT-40 5510MHz – 5710MHz (ch102 – ch142) Passive No 802.11ac-VHT80 5530MHz – 5690MHz (ch106 – ch138) Passive No W58 802.11a/n-HT20/ac-VHT-20 5745MHz – 5825MHz (ch149 – ch165) Active Yes 802.11n-HT40/ac-VHT-40 5755MHz – 5795MHz (ch151 – ch159) Active Yes 802.11ac-VHT80 5775MH (ch155) Active Yes The device cannot operate in 5600MHz~5650MHz band in Canada Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. La transmission des données est toujours initiée par le logiciel, puis les données sont transmises par 'intermédiaire du MAC, par la bande de base numérique et analogique et, enfin, à la puce RF. Plusieurs paquets spéciaux sont initiés par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de base numérique active l'émetteur RF, puis désactive celui-ci à la fin du paquet. En conséquence, l'émetteur reste uniquement activé lors de la transmission d'un des paquets susmentionnés. En d'autres termes, ce dispositif interrompt automatiquement toute transmission en cas d'absence d'information à transmettre ou de défaillance. End users cannot modify the software because F/W & driver are installed in device.
Preliminary Specification Number : SP-ZZ1PJ-F 36 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. 2. Antenna ■Please refer to KDB 996369 ■Please perform the antenna design that followed the specifications of the antenna. ■About the signal line between an antenna and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points. 1) It is the same type as the antenna type of antenna specifications. 2) An antenna gain is lower than a gain given in antenna specifications. 3) The emission level is not getting worse. ■50-ohm feed line(microstrip line length) Antenna Antenna type PCB Antenna 50-ohm feed line length We test it at 26.4mm as a representative 3. Notice For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains IC: 772C-LB1PJ This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. *When the product is small, as for these words mentioned above, the posting to a manual is possible. 5150-5250 MHz band is restricted to indoor operation only. La bande 5150-5250 MHz est restreinte à une utilisation à l’intérieur seulement. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Preliminary Specification Number : SP-ZZ1PJ-F 37 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. ●When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain. RF Exposure requirements are met when installed in mobile equipment. This module cannot be installed in portable equipment without further testing and a change to FCC's grant of authorization. Contact Murata regarding portable applications. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3)The use of an antenna with gain less than 3.1 dBi(2.4GHz) and 2.8 dBi(5GHz). As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1)L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2)Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 3 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. La transmission des données est toujours initiée par le logiciel, puis les données sont transmises par 'intermédiaire du MAC, par la bande de base numérique et analogique et, enfin, à la puce RF. Plusieurs paquets spéciaux sont initiés par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de base numérique active l'émetteur RF, puis désactive celui-ci à la fin du paquet. En conséquence, l'émetteur reste uniquement activé lors de la transmission d'un des paquets susmentionnés. En d'autres termes, ce dispositif interrompt automatiquement toute transmission en cas d'absence d'information à transmettre ou de défaillance.
Preliminary Specification Number : SP-ZZ1PJ-F 38 / 38 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata(China) Investment Co., Ltd. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et 'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 772C-LB1PJ ”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 772C-LB1PJ ". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.

Navigation menu