Murata LB1PJ W-LAN + Bluetooth Module User Manual

Murata Manufacturing Co., Ltd. W-LAN + Bluetooth Module Users Manual

Users Manual

Download: Murata LB1PJ W-LAN + Bluetooth Module User Manual
Mirror Download [FCC.gov]Murata LB1PJ W-LAN + Bluetooth Module User Manual
Document ID3749368
Application IDrcEQciDOC8vShJargN4NrA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize263.91kB (3298904 bits)
Date Submitted2018-02-11 00:00:00
Date Available2018-02-11 00:00:00
Creation Date2018-01-30 09:35:07
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2018-02-07 09:28:27
Document TitleUsers Manual
Document CreatorMicrosoft® Word 2010
Document Author: MM04133

Preliminary Specification Number :SP-ZZ1PJ-F
W-LAN + Bluetooth Module Data Sheet
Qualcomm Chipset
for 802.11a/b/g/n/ac + Bluetooth 4.1 (Dual)
MP Part Number: LBEE5ZZ1PJ
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
1 / 38
The revision history of the product specification
Revised
Date
April 21,
2017
June 26,
2017
Aug 2,
2017
Aug 10,
2017
Aug 21,
2017
Nov 2,
2017
Dec 25,
2017
Revision
Code
Revised
Page
3,4
Revised Item
Change
Reason
First release
Module Height
Updated
Absolute Maximum Rating
7, 12~20 Operating Condition
DC/RF Characteristics
Updated
22
Reference circuit
Added
21
Land pattern
Added
7, 24~26
Marking
Tape and Reel packing
Certification information
4, 31~38
Appendix
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Added
Added
Preliminary Specification Number : SP-ZZ1PJ-F
2 / 38
TABLE OF CONTENTS
1.
2.
3.
4.
5.
6.
SCOPE ..................................................................................................................................................... 3
KEY FEATURE ...................................................................................................................................... 3
Part Number ........................................................................................................................................... 3
RoHS Compliance ................................................................................................................................... 3
Block Diagram ........................................................................................................................................ 3
Certification Information ....................................................................................................................... 4
6.1.
7.
Radio Certification ................................................................................................................... 4
DIMENSIONS, MARKING AND TERMINAL CONFIGURATIONS ................................................. 4
7.1.
7.2.
7.3.
Dimensions ............................................................................................................................... 4
Pin Layout and PIN Descriptions ........................................................................................... 5
Marking ..................................................................................................................................... 7
8. ABSOLUTE MAXIMUM RATINGS*1)................................................................................................... 8
9. OPERATING CONDITION*2) ................................................................................................................ 8
10.
External low–power 32.768 kHz clock............................................................................................... 8
11.
POWER ON SEQUENCE .................................................................................................................. 9
11.1.
11.2.
11.3.
12.
13.
Digital I/O Requirements ................................................................................................................. 12
INTERFACE TIMING AND AC CHARACTERISTICS ................................................................. 12
13.1.
13.2.
13.3.
14.
DC/RF Characteristics for IEEE802.11b - 2.4GHz .......................................................... 13
DC/RF Characteristics for IEEE802.11g - 2.4GHz .......................................................... 14
DC/RF Characteristics for IEEE802.11n – 2.4GHz ......................................................... 15
DC/RF Characteristics for IEEE802.11ac – 2.4GHz ........................................................ 16
DC/RF Characteristics for IEEE802.11a - 5GHz ............................................................. 17
DC/RF Characteristics for IEEE802.11n - 5GHz ............................................................. 18
DC/RF Characteristics for IEEE802.11ac - 5GHz ............................................................ 19
DC/RF Characteristics for Bluetooth ................................................................................ 20
DC/RF Characteristics for Bluetooth (LE)........................................................................ 21
LAND PATTERN (TOP VIEW) ........................................................................................................ 22
REFERENCE CIRCUIT ................................................................................................................... 23
TAPE AND REEL PACKING ........................................................................................................... 24
NOTICE ............................................................................................................................................. 27
18.1.
18.2.
18.3.
18.4.
18.5.
18.6.
18.7.
18.8.
19.
Bluetooth UART Timing .................................................................................................... 12
I2S Timing ........................................................................................................................... 12
SDIO Timing ....................................................................................................................... 12
DC / RF Characteristics.................................................................................................................... 13
14.1.
14.2.
14.3.
14.4.
14.5.
14.6.
14.7.
14.8.
14.9.
15.
16.
17.
18.
Case 1: 3.3 V power down after 1.8 V.................................................................................. 9
Case 2: 1.8 V power down after 3.3 V................................................................................ 10
Case 3: All power rails supplied with 3.3 V .......................................................................11
Storage Conditions: ............................................................................................................ 27
Handling Conditions: ......................................................................................................... 27
Standard PCB Design (Land Pattern and Dimensions): ................................................. 27
Notice for Chip Placer: ....................................................................................................... 27
Soldering Conditions: ......................................................................................................... 28
Cleaning: ............................................................................................................................. 28
Operational Environment Conditions: .............................................................................. 28
Input Power Capacity: ........................................................................................................ 29
PRECONDITION TO USE OUR PRODUCTS ............................................................................... 30
Please be aware that an important notice concerning availability, standard warranty and use in critical applications of
Murata products and disclaimers thereto appears at the end of this specification sheet.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
3 / 38
1. SCOPE
This specification is applied to the IEEE802.11a/b/g/n/ac W-LAN + Bluetooth 4.1 combo module.
2. KEY FEATURE
- Chipset : QCA9377-3
- Size : 7.2 x 7.4 x 1.25 (max) mm
- PCB w/ shielded resin mold module
- IEEE802.11a/b/g/n/ac dual band 2.4G/5G
- Supports BT4.1
- SDIO 3.0 (WLAN), UART/PCM (Bluetooth)
- Lead Free Module
3. Part Number
Ordering Part Number
LBEE5ZZ1PJ
LBEE5ZZ1PJ-TEMP
Description
MP order
In case of sample order
4. RoHS Compliance
This module is compliant with the RoHS directive.
5. Block Diagram
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
4 / 38
6. Certification Information
6.1.
Radio Certification
USA/Canada
FCC ID
VPYLB1PJ
IC
772C-LB1PJ
*Please follow installation manual in Appendix
Europe
EN300328 v2.1.1, EN301893 v2.1.1 and EN300440 v2.1.1 test reports are prepared.
7. DIMENSIONS, MARKING AND TERMINAL CONFIGURATIONS
7.1.
Dimensions



Table 1 Dimension (Unit: mm)
Mark
Dimension
7.40±0.20
0.30±0.10
a1
0.80±0.10
a4
0.25±0.15
b2
0.20±0.15
b5
1.55±0.15
b8
0.55±0.10
c3
0.30±0.10
e1
0.30±0.10
e4
Mark
a2
a5
b3
b6
c1
c4
e2
e5
Dimension
7.20±0.20
0.30±0.10
0.30±0.10
1.45±0.15
1.05±0.15
0.55±0.10
0.80±0.10
0.30±0.10
0.30±0.10
Mark
a3
b1
b4
b7
c2
c5
e3
Dimension
1.25 max
0.30±0.10
0.20±0.15
5.15±0.15
1.35±0.15
0.55±0.10
0.30±0.10
0.30±0.10
(unit : mm)
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
5 / 38
7.2.
Pin Layout and PIN Descriptions
Top View
Table 2 Terminal Configurations
Pin
NO.
Terminal Name
Type
VDDIO or
pad voltage
Connection to
IC terminal
Description
GND
Ground
Ground
VBUCK_GND_PM
Ground
VBUCK_GND_PM
Ground for internal 1.1 V regulator
PWM_PM
1.1V
PWM_PM
SWREG PMU 1.1V output.
VDD11_PM
1.1V
VDD11_PM
1.1 V voltage feedback to SWREG PMU.
GND
Ground
Ground
SDIO_DATA3
I/O
VDDIO_SDIO
SDIO_D3
SDIO data bus D3
SDIO_DATA2
I/O
VDDIO_SDIO
SDIO_D2
SDIO data bus D2
SDIO_DATA1
I/O
VDDIO_SDIO
SDIO_D1
SDIO data bus D1
SDIO_DATA0
I/O
VDDIO_SDIO
SDIO_D0
SDIO data bus D0
10
SDIO_CMD
VDDIO_SDIO
SDIO_CMD
SDIO CMD line signal
11
SDIO_CLK
OD(1)
VDDIO_SDIO
SDIO_CLK
SDIO clock signal
12
VDDIO_SDIO
Power
1.8V or 3.3V
VDDIO_SDIO
Voltage supply for SDIO
13
SDIO_INTERRUPT_L
VDDIO_SDIO
SDIO_INTERRUPT_L
SDIO interrupt signal
14
GND
Ground
Ground
15
32KHz_CLK_IN
VDDIO_GPIO2
LF_CLK_IN
External low–power 32.768 kHz clock input
16
VDDIO_GPIO2
Power
1.8V or 3.3V
VDDIO_GPIO2
Voltage supply
17
HCI_UART_WAKEHOST
OD(1)
VDDIO_GPIO2
HCI_UART_WAKEHOST
Bluetooth wakeup host. Active high
18
WLAN_RF_KILL_L
VDDIO_GPIO2
WLAN_RFKILL_L
Turn off WLAN RF analog and front–end.
Active low.
19
GND
Ground
Ground
20
2G_WIFI/BT_RF_OUT
A,O
2G WIFI and BT output
21
GND
Ground
Ground
22
2G_WIFI/BT_RF_IN
A, I
2G WIFI and BT input
23
GND
Ground
Ground
24
ANT
A, I/O
RF Transmit / Receive Antenna
25
GND
Ground
Ground
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
6 / 38
26
3D_FRAME_SYNC
VDDIO_GPIO1
3D_FRAME_SYNC
Frame sync signal from TV to sync with 3D
27
HCI_UART_RXD
VDDIO_GPIO1
HCI_UART_RXD
UART RXD signal
28
HCI_UART_TXD
VDDIO_GPIO1
HCI_UART_TXD
UART TXD signal
29
HCI_UART_RTS
VDDIO_GPIO1
HCI_UART_RTS
UART RTS signal
30
HCI_UART_CTS
VDDIO_GPIO1
HCI_UART_CTS
UART CTS signal
31
PCM_CLK
VDDIO_GPIO1
BT_I2S_SCK
Bluetooth PCM_CLK signal
32
PCM_SYNC
I/O
VDDIO_GPIO1
BT_I2S_WS
Bluetooth PCM_SYNC signal
33
PCM_IN
OD(1)
VDDIO_GPIO1
BT_I2S_SDI
Bluetooth PCM_IN signal
34
PCM_OUT
VDDIO_GPIO1
BT_I2S_SDO
Bluetooth PCM_OUT signal
35
GND
Ground
Ground
36
VDDIO_XTAL
Power
1.8V or 3.3V
VDDIO_XTAL
Voltage supply for XTAL
37
VDDIO_GPIO1
Power
1.8V or 3.3V
VDDIO_GPIO1
Voltage supply
38
GND
Ground
Ground
39
WLAN_EN
VDDIO_AO
WL_EN
WLAN enable. Active high
40
BT_EN
VDDIO_AO
BT_EN
Bluetooth enable. Active high
41
VDD_3P3
Power
3.3V
VDD33_PM
3.3 V input voltage
42
VDDIO_AO
Power
1.8V or 3.3V
VDDIO_AO_PM
Always–on I/O supply for power
glass via Bluetooth.
management and real–time clock. This
supply must be present if any other supply
is present.
43
GND
Ground
Ground
44
LTE_UART_RXD
VDDIO_GPIO1
LTE_UART_RXD
LTE coexistence signal.
45
LTE_UART_TXD
VDDIO_GPIO1
LTE_UART_TXD
46
CLK_REQ
VDDIO_GPIO1
CLK_REQ
Clock request output
47
DBG_UART_TXD
OD(1)
VDDIO_AO
GPIO[19]
DBG_UART_TXD
48
DBG_UART_RXD
OD(1)
VDDIO_GPIO2
GPIO[18]
DBG_UART_RXD
49
QOW
OD(1)
VDDIO_GPIO2
QOW
This signal can be used to enable for
50~
GND
Ground
LTE_UART_RXD or LTE_FS.
LTE co– existence signal.
LTE_UART_TXD or LTE_PRI.
external Wireless charging UART circuit.
Ground
62
(1)
OD means this PIN is a digital output signal with open drain, an external pull-up or pull-down resistor is needed when this PIN is
used.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
7 / 38
7.3.
Marking
Marking
Meaning
Pin 1 Marking
Inspection Number
Module P/N
Murata Logo
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
8 / 38
8. ABSOLUTE MAXIMUM RATINGS*1)
Parameter
Storage Temperature
VDD_3P3
VDDIO_SDIO
VDDIO_GPIO1
Supply Voltage
VDDIO_GPIO2
VDDIO_XTAL
VDDIO_AO
min.
TBD
-0.3
max.
TBD
3.65
Unit
deg.C
-0.3
3.6
*1)
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation
is not implied under these conditions. Exposure to absolute ratings for extended periods of time
may adversely affect reliability. No damage assuming only one parameter is set at limit at a time
with all other parameters are set within operating condition.
9. OPERATING CONDITION*2)
Parameter
min.
Operating Temperature
-40
Specification Temperature range
TBD
VDD_3P3
3.135
VDDIO_SDIO
VDDIO_GPIO1
Supply Voltage
VDDIO_GPIO2
1.71
VDDIO_XTAL
VDDIO_AO
typ.
TBD
3.3
max.
85
TBD
3.465
unit
deg.C
deg.C
1.8 or 3.3
3.46
*2)
Functionality is guaranteed but the specifications require the derating at over-temperatures,
over-voltage condition.
10. External low–power 32.768 kHz clock
TBD
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
9 / 38
11. POWER ON SEQUENCE
11.1.
Case 1: 3.3 V power down after 1.8 V
If the battery source can be removed from the end user device (battery removed, AC/DC plugged
in), this is the recommended power sequence. It will avoid violating the power off sequence by
allowing the 3.3 V rail to shut down after the 1.8 V rail.
Notes:
1. VDDIO_GPIO voltage should match VIO voltage from the host. In some applications,
VDDIO_GPIO may connected to 3.3 V upon Host VIO voltage.
2. In this case, both WLAN_EN and BT_EN on the 1PJ are at 3.3 V due to using the VDD_AO
power rail. If the host VIO voltage is 1.8 V, it must have level shifters to interface with host.
3. All host interface signals must stay floating or low before valid power on sequence (WLAN_EN
and BT-EN goes high).
VDD_3.3 (3.3V)
Symbol
Parameter
Min
Max
Units
ta1
No requirement if VDDIO_AO connected to 3.3 V
μs
ta2
90% of 3.3 V to 10% of 1.8 V
μs
ta3
90% of VDDIO_GPIO to 0.7 V of both WLAN_EN and BT_EN
10
μs
ta4
WLAN_EN valid to LF_CLK_IN input
μs
ta5
WLAN_EN valid to VDD11AO_PM_OUT established
50
μs
ta6
WLAN_EN to DVDD11
3.5
ms
ta7
WLAN_EN to AVDD11
ms
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
10 / 38
ta8
AVDD11 to XTAL clock stable
ms
ta9
WLAN_EN de-assert (“low”) to LF_CLK_IN de-assert
(tristate or low)
μs
ta10
Both WLAN_EN = low and BT_EN = low to 90% of 1.8 V
10
μs
μs
μs
3.3 V always higher than 1.8 V during operation, with power
off by removing battery or unplugging AC/DC
VDDIO_AO and VDDIO_XTAL should be connected to 3.3 V
power rail
ta11
ta12
11.2.
Case 2: 1.8 V power down after 3.3 V
If the battery source cannot be removed from the end user device, this is the recommended
power sequence for this application. This sequence allows the software to control the power
on/off sequence.
Notes:
1. VDDIO_GPIO voltage should match VIO voltage from the host. In some applications,
VDDIO_GPIO may connected to 3.3 V upon host VIO voltage.
2. Both WLAN_EN and BT_EN of 1PJ are 1.8 V. If host VIO voltage is 1.8 V, it does
not need level shifter to interface with host.
3. All host interface signals must stay floating or low before WLAN_EN/BT_EN =”high”, and
after WLAN_EN/BT_EN = Low.
VDD_3.3 (3.3V)
Symbol
Parameter
Min
Max
Units
tb1
No requirement if VDDIO_AO connected to 1.8 V
μs
tb2
90% of 1.8 V to 10% of 3.3 V
μs
tb3
90% of 3.3 V to 0.7 V of both WLAN_EN and BT_EN
10
μs
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
11 / 38
tb4
WLAN_EN valid to LF_CLK_IN input
μs
tb5
WLAN_EN valid to VDD11AO_PM_OUT established
50
μs
tb6
WLAN_EN to DVDD11
3.5
ms
tb7
WLAN_EN to AVDD11
ms
tb8
AVDD11 to XTAL clock stable
ms
tb9
WLAN_EN de-assert (“low”) to LF_CLK_IN de-assert
(tristate or low)
μs
tb10
Both WLAN_EN = low and BT_EN = low to 90% of 3.3 V
10
μs
tb11
10% of 3.3 V to 90% of 1.8 V
μs
tb12
VDDIO_AO and VDDIO_XTAL should be connected to 1.8 V
power rail
μs
11.3.
Case 3: All power rails supplied with 3.3 V
All power pins are connected to 3.3 V only include VDDIO_AO, VDDIO_XTAL, VDDIO_GPIOx.
Notes:
All host signals are either GND or floating before WLAN_EN/BT_EN =”high”, and after
WLAN_EN/BT_EN = Low.
VDD_3.3 (3.3V)
Symbol
Parameter
Min
Max
Units
tc1
90% of 3.3 V to 0.7 V of both WLAN_EN and BT_EN
μs
tc4
WLAN_EN valid to LF_CLK_IN input
μs
tc5
WLAN_EN valid to VDD11AO_PM_OUT established
50
μs
tc6
WLAN_EN to DVDD11
3.5
ms
tc7
WLAN_EN to AVDD11
ms
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
12 / 38
tc8
AVDD11 to XTAL clock stable
ms
tc9
WLAN_EN de-assert (“low”) to LF_CLK_IN de-assert (tristate
or low)
μs
tc10
Both WLAN_EN = low and BT_EN = low to 90% of 3.3 V
10
μs
12. Digital I/O Requirements
TBD
13. INTERFACE TIMING AND AC CHARACTERISTICS
13.1.
TBD
Bluetooth UART Timing
13.2.
I2S Timing
TBD
13.3.
SDIO Timing
TBD
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
13 / 38
14. DC / RF Characteristics
14.1.
DC/RF Characteristics for IEEE802.11b - 2.4GHz
Specification
Mode
Frequency
Data rate
IEEE802.11b
DSSS / CCK
2412 to 2472 MHz
1, 2, 5.5, 11Mbps
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Output power setting=19 dBm, 11Mbps mode unless otherwise specified.
Items
Contents
- DC Characteristics min.
typ.
max.
1. DC current
1) Tx mode (1024byte, 20usec interval)
330
*4) *5)
2) Rx mode
60
- Tx Characteristics min.
typ.
max.
2. Output Power
19
3. Spectrum Mask margin
1) 1st side lobes(-30dBr)
2) 2nd side lobes(-50dBr)
4. Power-on and Power-down ramp
2.0
5. RF Carrier Suppression
15
6. Modulation Accuracy (EVM)
35
7.Frequency tolerance
-20
20
8. Out band Spurious Emissions
1) 30-1000MHz
-36
2) 1000-12750MHz
-30
3) 1800-1900MHz
-47
4) 5150-5300MHz
-47
- Rx Characteristics min.
typ.
max.
9. Minimum Input Level Sensitivity
-89
-76
10. Maximum Input Level (PER < 8%)
-10
11. Adjacent Channel Rejection
35
(FER < 8%)
*4): Defined when output power setting is 19 dBm at Murata module antenna pad
*5): Data rate is 1Mbps
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
unit
mA
mA
unit
dBm
dB
dB
μsec
dB
ppm
dBm
dBm
dBm
dBm
unit
dBm
dBm
dB
Preliminary Specification Number : SP-ZZ1PJ-F
14 / 38
14.2.
DC/RF Characteristics for IEEE802.11g - 2.4GHz
Specification
Mode
Frequency
Data rate
IEEE802.11g
OFDM
2412 to 2472 MHz
6, 9, 12, 18, 24, 36, 48, 54Mbps
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Output power setting=17 dBm, 54Mbps mode unless otherwise specified.
Items
Contents
- DC Characteristics min.
typ.
max.
1. DC current
1) Tx mode (1024byte, 20usec interval)
310
*6) *7)
2) Rx mode
60
- Tx Characteristics min.
typ.
max.
2. Output Power
17
3. Spectrum Mask margin
1) 9MHz to 11MHz (0~ -20dBr)
2) 11MHz to 20MHz (-20~ -28dBr)
3) 20MHz to 30MHz (-28~ -40dBr)
4) 30MHz to 33MHz (-40dBr)
4. Constellation Error (EVM)
-25
5.Frequency tolerance
-20
20
6. Out band Spurious Emissions
1) 30-1000MHz
-36
2) 1000-12750MHz
-30
3) 1800-1900MHz
-47
4) 5150-5300MHz
-47
- Rx Characteristics min.
typ.
max.
7. Minimum Input Level Sensitivity
-74
-65
8. Maximum Input Level (PER < 10%)
-20
9. Adjacent Channel Rejection
-1
(PER < 10%)
*6): Defined when output power setting is 18dBm at Murata module antenna pad
*7): Data rate is 6Mbps
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
unit
mA
mA
unit
dBm
dB
dB
dB
dB
dB
ppm
dBm
dBm
dBm
dBm
unit
dBm
dBm
dB
Preliminary Specification Number : SP-ZZ1PJ-F
15 / 38
14.3.
DC/RF Characteristics for IEEE802.11n – 2.4GHz
Specification
Mode
Frequency
Data rate
IEEE802.11n
OFDM
2412 to 2472 MHz
MCS0-MCS7
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Output power setting=16 dBm, BW=20MHz, MCS7 unless otherwise specified.
- DC Characteristics min.
typ.
max.
1. DC current
1) Tx mode (1024byte, 20usec interval)
310
*8)*9)
2) Rx mode
60
- Tx Characteristics min.
typ.
max.
2. Output Power
16
3. Spectrum Mask
1) 9MHz to 11MHz (0 ~ -20dBr)
2) 11MHz to 20MHz (-20 ~ -28dBr)
3) 20MHz to 30MHz (-28 ~ -45dBr)
4) 30MHz to 33MHz (-45dBr)
4. Constellation Error (EVM)
-27
5.Frequency tolerance
-20
20
6. Out band Spurious Emissions
1) 30-1000MHz
-36
2) 1000-12750MHz
-30
3) 1800-1900MHz
-47
4) 5150-5300MHz
-47
- Rx Characteristics min.
typ.
max.
6. Minimum Input Level Sensitivity
-71
-64
7. Adjacent Channel Rejection
-2
(PER < 10%)
*8): Defined when output power setting is 18 dBm at Murata module antenna pad
*9): Data rate is MCS0
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
unit
mA
mA
unit
dBm
dB
dB
dB
dB
dB
ppm
dBm
dBm
dBm
dBm
unit
dBm
dB
Preliminary Specification Number : SP-ZZ1PJ-F
16 / 38
14.4.
DC/RF Characteristics for IEEE802.11ac – 2.4GHz
Specification
Mode
Frequency
Data rate
IEEE802.11ac
OFDM
2412 to 2472 MHz
MCS0-MCS9
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Output power setting=14 dBm, MCS9,BW=40MHz unless otherwise specified.
- DC Characteristics min.
typ.
max.
1. DC current
1) Tx mode (1024byte, 20usec interval)
290
*8)*9)
2) Rx mode
62
- Tx Characteristics min.
typ.
max.
2. Output Power
14
3. Spectrum Mask
1) 9MHz to 11MHz (0 ~ -20dBr)
2) 11MHz to 20MHz (-20 ~ -28dBr)
3) 20MHz to 30MHz (-28 ~ -45dBr)
4) 30MHz to 33MHz (-45dBr)
4. Constellation Error (EVM)
-32
5.Frequency tolerance
-20
20
6. Out band Spurious Emissions
1) 30-1000MHz
-36
2) 1000-12750MHz
-30
3) 1800-1900MHz
-47
4) 5150-5300MHz
-47
- Rx Characteristics min.
typ.
max.
6. Minimum Input Level Sensitivity
-63
-54
7. Adjacent Channel Rejection
-2
(PER < 10%)
*8): Defined when output power setting is 16 dBm at Murata module antenna pad
*9): Data rate is MCS0
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
unit
mA
mA
unit
dBm
dB
dB
dB
dB
dB
ppm
dBm
dBm
dBm
dBm
unit
dBm
dB
Preliminary Specification Number : SP-ZZ1PJ-F
17 / 38
14.5.
DC/RF Characteristics for IEEE802.11a - 5GHz
Specification
Mode
Frequency
Data rate
IEEE802.11a
OFDM
5180 to 5825MHz
6, 9, 12, 18, 24, 36, 48, 54Mbps
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Output power setting= 11 dBm, 54Mbps unless otherwise specified.
- DC Characteristics min.
typ.
max.
1. DC current
1) Tx mode (1024byte, 20usec interval)
420
*8)*9)
2) Rx mode
80
- Tx Characteristics min.
typ.
max.
2. Output Power
11
3. Spectrum Mask
1) 9MHz to 11MHz (0 ~ -20dBr)
2) 11MHz to 20MHz (-20 ~ -28dBr)
3) 20MHz to 30MHz (-28 ~ -45dBr)
4) 30MHz to 33MHz (-45dBr)
4. Constellation Error (EVM)
-25
5.Frequency tolerance
-20
20
6. Out band Spurious Emissions
1) 30-1000MHz
-36
2) 1000-12750MHz
-30
3) 1800-1900MHz
-47
4) 5150-5300MHz
-47
- Rx Characteristics min.
typ.
max.
6. Minimum Input Level Sensitivity
-71
-65
7. Adjacent Channel Rejection
-1
(PER < 10%)
*8): Defined when output power setting is 14 dBm at Murata module antenna pad
*9): Data rate is 6Mbps
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
unit
mA
mA
unit
dBm
dB
dB
dB
dB
dB
ppm
dBm
dBm
dBm
dBm
unit
dBm
dB
Preliminary Specification Number : SP-ZZ1PJ-F
18 / 38
14.6.
DC/RF Characteristics for IEEE802.11n - 5GHz
Specification
Mode
Frequency
Data rate
IEEE802.11n
OFDM
5180 to 5825MHz
MCS0-MCS7
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Output power setting= 10 dBm, BW=20MHz ,MCS7 unless otherwise specified.
- DC Characteristics min.
typ.
max.
1. DC current
1) Tx mode (1024byte, 20usec interval)
420
*8)*9)
2) Rx mode
80
- Tx Characteristics min.
typ.
max.
2. Output Power
10
3. Spectrum Mask
1) 9MHz to 11MHz (0 ~ -20dBr)
2) 11MHz to 20MHz (-20 ~ -28dBr)
3) 20MHz to 30MHz (-28 ~ -45dBr)
4) 30MHz to 33MHz (-45dBr)
4. Constellation Error (EVM)
-32
5.Frequency tolerance
-20
20
6. Out band Spurious Emissions
1) 30-1000MHz
-36
2) 1000-12750MHz
-30
3) 1800-1900MHz
-47
4) 5150-5300MHz
-47
- Rx Characteristics min.
typ.
max.
6. Minimum Input Level Sensitivity
-69
-64
7. Adjacent Channel Rejection
-2
(PER < 10%)
*8): Defined when output power setting is 14 dBm at Murata module antenna pad
*9): Data rate is MCS0
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
unit
mA
mA
unit
dBm
dB
dB
dB
dB
dB
ppm
dBm
dBm
dBm
dBm
unit
dBm
dB
Preliminary Specification Number : SP-ZZ1PJ-F
19 / 38
14.7.
DC/RF Characteristics for IEEE802.11ac - 5GHz
Specification
Mode
Frequency
Data rate
IEEE802.11ac
OFDM
5210 to 5775MHz
MCS0-MCS9
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Output power setting= 8 dBm, BW=80MHz ,MCS9 unless otherwise specified.
- DC Characteristics min.
typ.
max.
1. DC current
1) Tx mode (1024byte, 20usec interval)
370
*8)*9)
2) Rx mode
90
- Tx Characteristics min.
typ.
max.
2. Output Power
3. Spectrum Mask
1) 9MHz to 11MHz (0 ~ -20dBr)
2) 11MHz to 20MHz (-20 ~ -28dBr)
3) 20MHz to 30MHz (-28 ~ -45dBr)
4) 30MHz to 33MHz (-45dBr)
4. Constellation Error (EVM)
-32
5.Frequency tolerance
-20
20
6. Out band Spurious Emissions
1) 30-1000MHz
-36
2) 1000-12750MHz
-30
3) 1800-1900MHz
-47
4) 5150-5300MHz
-47
- Rx Characteristics min.
typ.
max.
6. Minimum Input Level Sensitivity
-59
-51
7. Adjacent Channel Rejection
-2
(PER < 10%)
*8): Defined when output power setting is 12dBm at Murata module antenna pad
*9): Data rate is MCS0
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
unit
mA
mA
unit
dBm
dB
dB
dB
dB
dB
ppm
dBm
dBm
dBm
dBm
unit
dBm
dB
Preliminary Specification Number : SP-ZZ1PJ-F
20 / 38
14.8.
DC/RF Characteristics for Bluetooth
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Items
Contents
Bluetooth specification (power class)
Version 2.1 + EDR (Class1)
Channel frequency (spacing)
2402 to 2480 MHz (1MHz)
Current Consumption
Min.
Typ.
Max.
(a) Tx=DH5
55
(b) Tx=2DH5
50
(c) Tx=3DH5
50
(d) Rx=DH5
22
(e) Rx=2DH5
22
(f) Rx=3DH5
22
Transmitter
Min.
Typ.
Max.
Output Power@DH5
Frequency range
2402
2480
20dB bandwidth
950
1000
*1
Adjacent Channel Power
(a) [M-N] =2
-20
(b) [M-N] ≥3
-40
Modulation characteristics
(a) Modulation Δf1avg
140
175
(b) Modulation Δf2max
115
(c) Modulation Δf2avg / Δf1avg
0.8
Carrier Frequency Drift
(a) 1slot
-25
+25
(b) 3slot / 5slot
-40
+40
(c) Maximum drift rate
20
EDR Relative Power
-4
+1
EDR Carrier Frequency Stability and
Modulation Accuracy
(a) ωi
-75
+75
(b) ωi+ωo
-75
+75
(c) ωo
-10
+10
(d) RMS DEVM (DQPSK)
20
(e) Peak DEVM (DQPSK)
35
(f) 99% DEVM (DQPSK)
30
(g) RMS DEVM (8DPSK)
13
(h) Peak DEVM (8DPSK)
25
(i) 99% DEVM (8DPSK)
20
Spurious Emissions
-36
(a) 10MHz≦f<2387MHz
-30
(b) 2387MHz≦f<2400MHz
-47
(c) 2483.5MHz
Murata(China) Investment Co., Ltd.
unit
mA
mA
mA
mA
mA
mA
Unit
dBm
MHz
MHz
dBm
dBm
kHz
kHz
kHz
kHz
kHz/50us
dB
kHz
kHz
kHz
dBm
dBm
dBm
dBm
unit
dBm
dBm
dB
dB
dB
dB
dB
dB
Maximum Input Level (BER<0.1%)
Preliminary Specification Number : SP-ZZ1PJ-F
21 / 38
-20
dBm
*1: Up to three spurious responses within Bluetooth limits are allowed.
*2: Up to five spurious responses within Bluetooth limits are allowed.
14.9.
DC/RF Characteristics for Bluetooth (LE)
Conditions : 25deg.C,
VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V
Items
Contents
Bluetooth specification (power class)
Version 4.1(LE)
Channel frequency (spacing)
2402 to 2480 MHz (2MHz)
Number of RF Channel
40
Item / Condition
Min.
Typ.
Max.
Center Frequency
2402
2480
Channel Spacing
Number of RF channel
40
Output power
10
Modulation Characteristics
1) Δf1avg
225
275
2) Δf2max (at 99.9%)
185
3) Δf2avg / Δf1avg
0.8
Carrier frequency offset and drift
1) Frequency offset
150
2) Frequency drift
50
3) Drift rate
20
Receiver sensitivity (PER < 30.8%)
-96
-70
Maximum input signal level (PER < 30.8%)
-10
PER Report Integrity (-30dBm input)
50
65.4
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Unit
MHz
MHz
dBm
kHz
kHz
kHz
kHz
kHz
dBm
dBm
Preliminary Specification Number : SP-ZZ1PJ-F
22 / 38
15. LAND PATTERN (TOP VIEW)

***Stencil design:
For 0.3×0.55mm electrodes, stencil pad is 0.24mm*0.44mm and should put in the center of the each
conductor.
For 0.8×0.8mm electrodes, stencil pad is 0.66mm*0.66mm and should put in the center of the each
conductor.
***This is based on Murata’s condition using the thickness of the stencil 100 um.
So this is just the recommendation and needs to modify based on your condition.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
23 / 38
16. REFERENCE CIRCUIT
C6
L1
1.5uH
TOLERANCE = 20%
C7
1uF
C3
R14
10K
OQW
R6
10K
VDDIO_AO
R5
10K
VDDIO_SDIO
VDDIO_XTAL
VDDIO_GPIO1
VDDIO_GPIO2
VDDIO_AO
VDD_3P3
GND
PWM_PM
VDD11_PM
VBUCK_GND_PM
R4
10K
VDDIO_GPIO2
41
12
36
37
16
42
VDDIO_AO
R15 VDDIO_SDIO
NU
VDDIO_XTAL
VDDIO_GPIO2
VDDIO_GPIO1
47uF
R13
NU
SDIO_DATA3
SDIO_DATA2
SDIO_DATA1
SDIO_DATA0
SDIO_CMD
SDIO_CLK
SDIO_INTERRUPT_L
32KHZ_CLK_IN
LTE_UART_TXD
LTE_UART_RXD
VDDIO_GPIO2
R3
10K
25
24
23
22
21
20
19
27
28
29
30
26
34
33
32
31
R9
10K
R17 0R
R2
BT Reset
BT_EN
WLAN_EN
27
C13
SW1
SKQY A
J1
CON2
J2
SKQY A
CON2
SW2
J3
SMA connector
RF-SOCKET_0
0.1uF
C2
R7
10K
VDDIO_AO
0.1uF
C1
R1
10K
VDDIO_AO
NU
27
C12
R8
WLAN Reset
BT_UART_RXD
BT_UART_TXD
BT_UART_RTS
BT_UART_CTS
NU
R16 0R
BT_HOST_WAKEUP_DEV/3D_FRAME_SY NC
BT_PCM_OUT
BT_PCM_IN
BT_PCM_SY NC
BT_PCM_CLK
VDDIO_GPIO1
BT_DEV_WAKEUP_HOST
BT_EN
WLAN_EN
PCM_OUT
PCM_IN
PCM_SY NC
PCM_CLK
3D_FRAME_SY NC
HCI_UART_RXD
HCI_UART_TXD
HCI_UART_RTS
HCI_UART_CTS
GND
ANT
GND
2G_WIFI/BT_RF_IN
GND
2G_WIFI/BT_RF_OUT
GND
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Notes for the power supply voltage:
1uF
C11
R12
NU
VDD_3V3
1. VDD_3V3 is powered by 3.3V typically.
2. VDDIO_AO, VDDIO_GPIO1, VDDIO_GPIO2, VDDIO_XTAL,
VDDIO_SDIO can be powered by 1.8V or 3.3V.
It should match the VIO voltage from host.
For the each I/O voltage group of 1PJ module, please
refer to 1PJ module datasheet.
C5
VDDIO_GPIO1
2.2uF
VDDIO_AO
C4
VDD_3V3
10uF
C10
0.1uF
VDDIO_SDIO
C9
10uF
VDDIO_XTAL
C8
1uF
VDDIO_GPIO2
1uF
VDDIO_SDIO
R11
NU
10
11
13
15
HCI_UART_WAKEHOST
GND
R10
10K
SDIO_DATA3
SDIO_DATA2
SDIO_DATA1
SDIO_DATA0
SDIO_CMD
SDIO_CLK
WL_DEV_WAKEUP_HOST
32KHz Clock in
LBEE5ZZ1PJ-164
GND
35
17
38
WLAN_RF_KILL_L
18
WLAN_RF_KILL_L
GND
43
40
39
BT_EN
WLAN_EN
CLK_REQ
45
44
CLK_REQ
46
LTE_UART_TXD
LTE_UART_RXD
DBG_UART_RXD
DBG_UART_TXD
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
49
QOW
48
47
DBG_UART_RXD
DBG_UART_TXD
58
57
56
55
54
53
52
51
59
60
61
62
50
GND
GND
14
Preliminary Specification Number : SP-ZZ1PJ-F
24 / 38
17. TAPE AND REEL PACKING
(1) Dimensions of Tape (Plastic tape)
Feeding direction
Unit: mm
P0
16+/-0.2
7.5+/-0.1
0.3+/-0.05
1.75+/-0.1
12+/-0.1
4+/-0.1
P2
A0
B0
K0
D0
D1
W1
W2
25.5 +/-1.0
29.5 +/-1.0
2+/-0.1
7.8+/-0.1
7.6+/-0.1
1.25+/-0.1
1.5+0.1/-0
1.5+/-0.1
(2) Dimensions of Reel
Unit: mm
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
25 / 38
(3) Taping Diagrams
[1] Feeding Hole :
[2] Hole for chip :
[3] Cover tape
[4] Base tape
[3]
As specified in (1)
As specified in (1)
62 um in thickness
As specified in (1)
[1]
[2]
[3]
[4]
Feeding Hole
Feeding Direction
Chip
(4) Leader and Tail tape
Tail tape
(No components) Components
No components
Leader tape
(Cover tape alone)
160 to 190 mm
150mm min.
250 mm min.
Feeding direction
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
26 / 38
-The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled
toward the user.
-The cover tape and base tape are not adhered at no components area for 250 mm min.
-Tear off strength against pulling of cover tape: 5 N min.
-Packaging unit: 1000 pcs/ reel
- Material: Base tape: Plastic
Reel : Plastic
Cover tape, cavity tape and reel are made the anti-static processing.
- Peeling of force: 1.1 N max. in the direction of peeling as shown below.
1.1 N max.
165 to 180 °
Cover tape
Base tape
- PACKAGE (Humidity proof packing)
Label べル
表示ラ
Desiccant
乾燥剤
Humidity
湿度
Indicator
イ ン ジ ケ－タ
表示ラ
Label ベル
防湿梱包袋
Anti-humidity
Plastic Bag
Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant
and the humidity indicator.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
27 / 38
18. NOTICE
18.1.
Storage Conditions:
Please use this product within 6month after receipt.
- The product shall be stored without opening the packing under the ambient temperature from 5 to
35deg.C and humidity from 20 to 70%RH.
(Packing materials, in particular, may be deformed at the temperature over 40deg.C.)
- The product left more than 6months after reception, it needs to be confirmed the solderbility before
used.
- The product shall be stored in non corrosive gas (Cl2, NH3, SO2, Nox, etc.).
- Any excess mechanical shock including, but not limited to, sticking the packing materials by sharp
object and dropping the product, shall not be applied in order not to damage the packing materials.
This product is applicable to MSL3 (Based on JEDEC Standard J-STD-020)
- After the packing opened, the product shall be stored at <30deg.C / <60%RH and the product shall be
used within 168hours.
- When the color of the indicator in the packing changed, the product shall be baked before soldering.
Baking condition: 125+5/-0deg.C, 24hours, 1time
The products shall be baked on the heat-resistant tray because the material (Base Tape, Reel Tape and
Cover Tape) are not heat-resistant.
18.2.
Handling Conditions:
Be careful in handling or transporting products because excessive stress or mechanical shock may
break products.
Handle with care if products may have cracks or damages on their terminals, the characteristics of
products may change. Do not touch products with bear hands that may result in poor solder ability and
destroy by static electrical charge.
18.3.
Standard PCB Design (Land Pattern and Dimensions):
All the ground terminals should be connected to the ground patterns. Furthermore, the ground pattern
should be provided between IN and OUT terminals. Please refer to the specifications for the standard
land dimensions.
The recommended land pattern and dimensions is as Murata's standard. The characteristics of
products may vary depending on the pattern drawing method, grounding method, land dimensions,
land forming method of the NC terminals and the PCB material and thickness. Therefore, be sure to
verify the characteristics in the actual set. When using non-standard lands, contact Murata beforehand.
18.4.
Notice for Chip Placer:
When placing products on the PCB, products may be stressed and broken by uneven forces from a
worn-out chucking locating claw or a suction nozzle. To prevent products from damages, be sure to
follow the specifications for the maintenance of the chip placer being used. For the positioning of
products on the PCB, be aware that mechanical chucking may damage products.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
28 / 38
18.5.
Soldering Conditions:
The recommendation conditions of soldering are as in the following figure.
When products are immersed in solvent after mounting, pay special attention to maintain the
temperature difference within 100 °C. Soldering must be carried out by the above mentioned
conditions to prevent products from damage. Set up the highest temperature of reflow within 260 °C.
Contact Murata before use if concerning other soldering conditions.
Reflow soldering standard conditions(Example)
Within 3s
235 to 245 deg.C
220 deg.C
Cooling down
Slowly
180 deg.C
150 deg.C
Pre-heating
Within 120s
Within 60s
time(s)
Please use the reflow within 2 times.
Use rosin type flux or weakly active flux with a chlorine content of 0.2 wt % or less.
18.6.
Cleaning:
Since this Product is Moisture Sensitive, any cleaning is not permitted.
18.7.
Operational Environment Conditions:
Products are designed to work for electronic products under normal environmental conditions (ambient
temperature, humidity and pressure). Therefore, products have no problems to be used under the
similar conditions to the above-mentioned. However, if products are used under the following
circumstances, it may damage products and leakage of electricity and abnormal temperature may
occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).
- In an atmosphere containing combustible and volatile gases.
- Dusty place.
- Direct sunlight place.
- Water splashing place.
- Humid place where water condenses.
- Freezing place.
If there are possibilities for products to be used under the preceding clause, consult with Murata before
actual use.
As it might be a cause of degradation or destruction to apply static electricity to products, do not apply
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
29 / 38
static electricity or excessive voltage while assembling and measuring.
18.8.
Input Power Capacity:
Products shall be used in the input power capacity as specified in this specifications.
Inform Murata beforehand, in case that the components are used beyond such input power capacity
range.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
30 / 38
19. PRECONDITION TO USE OUR PRODUCTS
PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS.
Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the
specifications of our product when our product is mounted to your product.
All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that
our product is used for the purpose, under the condition and in the environment specified in this specification. You are
requested not to use our product deviating from the condition and the environment specified in this specification.
Please note that the only warranty that we provide regarding the products is its conformance to the specifications
provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such
products, which are caused under the conditions other than those specified in this specification.
WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY
ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS.
The product shall not be used in any application listed below which requires especially high reliability for the prevention
of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree that,
if you use our products in such applications, we will not be responsible for any failure to meet such requirements.
Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS,
DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY
FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS.
- Aircraft equipment.
- Aerospace equipment
- Undersea equipment.
- Power plant control equipment - Medical equipment.
- Transportation equipment (vehicles, trains, ships, elevator, etc.).
- Traffic signal equipment.
- Disaster prevention / crime prevention equipment.
-Burning / explosion control equipment
- Application of similar complexity and/ or reliability requirements to the applications listed in the above.
We expressly prohibit you from analyzing, breaking, reverse-engineering, remodeling altering, and reproducing our
product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by
the regulations and laws in the world.
We do not warrant or represent that any license, either express or implied, is granted under any our patent right,
copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in
which our products or services are used. Information provided by us regarding third-party products or services does not
constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such
information may require a license from a third party under the patents or other intellectual property of the third party, or a
license from us under our patents or other intellectual property.
Please do not use our products, our technical information and other data provided by us for the purpose of developing of
mass-destruction weapons and the purpose of military use.
Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations",
etc.
Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials
and/or components from our suppliers.
By signing on specification sheet or approval sheet, you acknowledge that you are the legal representative for your
company and that you understand and accept the validity of the contents herein. When you are not able to return the
signed version of specification sheet or approval sheet within 30 days from receiving date of specification sheet or
approval sheet, it shall be deemed to be your consent on the content of specification sheet or approval sheet. Customer
acknowledges that engineering samples may deviate from specifications and may contain defects due to their
development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability
for damages caused by
- the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the
product to be sold by you,
-deviation or lapse in function of engineering sample,
-improper use of engineering samples.
We disclaim any liability for consequential and incidental damages.
If you can’t agree the above contents, you should inquire our sales.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
31 / 38
Appendix
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
32 / 38
LBEE5ZZ1PJ Installation Manual (FCC)
FCC ID of this module is as follows;
FCC ID:
VPYLB1PJ
For OEM integration only – device cannot be sold to general public.
Therefore we will ask OEM to include the following statement required by FCC on the product and in
the installation manual Notice.
Contents
1. Theory of operation
2. Antenna
3. Notice
1. Theory of operation
Frequency of operation
Scan
2.4GHz
Active
Active
Active
Active
Active
Passive
Passive
Passive
Passive
Passive
Passive
Active
Active
Active
802.11b/g/n-HT20
2412MHz – 2462MHz (ch1 – ch11)
802.11n-HT40
2422MHz – 2452MHz (ch3 – ch9)
W52
802.11a/n-HT20/ac-VHT-20 5180MHz – 5240MHz (ch36 – ch48)
802.11n-HT40/ac-VHT-40
5190MHz – 5239MHz (ch38 – ch46)
802.11ac-VHT80
5210MHz (ch42)
W53
802.11a/n-HT20/ac-VHT-20 5260MHz – 5320MHz (ch52 – ch64)
802.11n-HT40/ac-VHT-40
5270MHz – 5310MHz (ch54 – ch62)
802.11ac-VHT80
5290MHz (ch58)
W56
802.11a/n-HT20/ac-VHT-20 5500MHz – 5720MHz (ch100 – ch144)
802.11n-HT40/ac-VHT-40
5510MHz – 5710MHz (ch102 – ch142)
802.11ac-VHT80
5530MHz – 5690MHz (ch106 – ch138)
W58
802.11a/n-HT20/ac-VHT-20 5745MHz – 5825MHz (ch149 – ch165)
802.11n-HT40/ac-VHT-40
5755MHz – 5795MHz (ch151 – ch159)
802.11ac-VHT80
5775MH (ch155)
The device cannot operate in 5600MHz~5650MHz band in Canada
Ad-hoc
mode
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed down through the MAC, through
the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the
MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then
turns off at the end of the packet. Therefore, the transmitter will be on only while one of the
aforementioned packets is being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or operational failure.
Frequency Tolerance: ± 20ppm
End users cannot modify the software because F/W & driver are installed in device.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
33 / 38
2. Antenna
■Please refer to KDB 996369
■Please perform the antenna design that followed the specifications of the antenna.
■About the signal line between an antenna and a module
It is a 50-ohm line design.
Fine tuning of return loss etc. can be performed using a matching network.
However, it is required to check "Class1 change" and "Class2 change" which the authorities define
then.
The concrete contents of a check are the following three points.
1) It is the same type as the antenna type of antenna specifications.
2) An antenna gain is lower than a gain given in antenna specifications.
3) The emission level is not getting worse.
■50-ohm feed line(microstrip line length)
Antenna type
50-ohm feed line length
Antenna
PCB Antenna
We test it at 26.4mm as a representative
3. Notice
For OEM integration only – device cannot be sold to general public.
Therefore we will ask OEM to include the following statements required by FCC/IC on the product and
in the Installation manual Notice.
Please describe the following warning on the final product which contains this module.
Contains Transmitter Module FCC ID: VPYLB1PJ
or
Contains FCC ID: VPYLB1PJ
●Please describe the following warning to the manual.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
※When the product is small, as for these words mentioned above, the posting to a manual is possible.
●When installing it in a mobile equipment. Please describe the following warning to the manual.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and
operated keeping the radiator at least 20cm or more away from person’s body.
RF Exposure requirements are met when installed in mobile equipment.
This module cannot be installed in portable equipment without further testing and a change to FCC's
grant of authorization. Contact Murata regarding portable applications.
Note)
Portable equipment : Equipment for which the spaces between human body and antenna are used
within 20cm.
Mobile equipment : Equipment used at position in which the spaces between human body and antenna
exceeded 20cm.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
34 / 38
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
3) The use of an antenna with gain less than 3.1 dBi(2.4GHz) and 2.8 dBi(5GHz).
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed
IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM
integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining
a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such
that 20 cm may be maintained between the antenna and users. The final end product must be labeled
in a visible area with the following: “Contains FCC ID: VPYLB1PJ ”. The grantee's FCC ID can be used
only when all FCC compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install
or remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
35 / 38
LBEE5ZZ1PJ Installation Manual (IC)
IC No. of this device is as follows;
IC:
772C-LB1PJ
For OEM integration only – device cannot be sold to general public.
Therefore, we will ask OEM to include the following statements required by IC on the product and in the
installation manual Notice.
Contents
1. Theory of operation
2. Antenna
3. Notice
1. Theory of operation
Frequency of operation
Scan
2.4GHz
Active
Active
Active
Active
Active
Passive
Passive
Passive
Passive
Passive
Passive
Active
Active
Active
802.11b/g/n-HT20
2412MHz – 2462MHz (ch1 – ch11)
802.11n-HT40
2422MHz – 2452MHz (ch3 – ch9)
W52
802.11a/n-HT20/ac-VHT-20 5180MHz – 5240MHz (ch36 – ch48)
802.11n-HT40/ac-VHT-40
5190MHz – 5239MHz (ch38 – ch46)
802.11ac-VHT80
5210MHz (ch42)
W53
802.11a/n-HT20/ac-VHT-20 5260MHz – 5320MHz (ch52 – ch64)
802.11n-HT40/ac-VHT-40
5270MHz – 5310MHz (ch54 – ch62)
802.11ac-VHT80
5290MHz (ch58)
W56
802.11a/n-HT20/ac-VHT-20 5500MHz – 5720MHz (ch100 – ch144)
802.11n-HT40/ac-VHT-40
5510MHz – 5710MHz (ch102 – ch142)
802.11ac-VHT80
5530MHz – 5690MHz (ch106 – ch138)
W58
802.11a/n-HT20/ac-VHT-20 5745MHz – 5825MHz (ch149 – ch165)
802.11n-HT40/ac-VHT-40
5755MHz – 5795MHz (ch151 – ch159)
802.11ac-VHT80
5775MH (ch155)
The device cannot operate in 5600MHz~5650MHz band in Canada
Ad-hoc
mode
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Data transmission is always initiated by software, which is the passed down through the MAC, through
the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the
MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then
turns off at the end of the packet. Therefore, the transmitter will be on only while one of the
aforementioned packets is being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or operational failure.
La transmission des données est toujours initiée par le logiciel, puis les données sont transmises par
'intermédiaire du MAC, par la bande de base numérique et analogique et, enfin, à la puce RF. Plusieurs
paquets spéciaux sont initiés par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de
base numérique active l'émetteur RF, puis désactive celui-ci à la fin du paquet. En conséquence,
l'émetteur reste uniquement activé lors de la transmission d'un des paquets susmentionnés. En
d'autres termes, ce dispositif interrompt automatiquement toute transmission en cas d'absence
d'information à transmettre ou de défaillance.
End users cannot modify the software because F/W & driver are installed in device.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
36 / 38
2. Antenna
■Please refer to KDB 996369
■Please perform the antenna design that followed the specifications of the antenna.
■About the signal line between an antenna and a module
It is a 50-ohm line design.
Fine tuning of return loss etc. can be performed using a matching network.
However, it is required to check "Class1 change" and "Class2 change" which the authorities define
then.
The concrete contents of a check are the following three points.
1) It is the same type as the antenna type of antenna specifications.
2) An antenna gain is lower than a gain given in antenna specifications.
3) The emission level is not getting worse.
■50-ohm feed line(microstrip line length)
Antenna type
50-ohm feed line length
Antenna
PCB Antenna
We test it at 26.4mm as a representative
3. Notice
For OEM integration only – device cannot be sold to general public.
Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the
Installation manual Notice.
Please describe the following warning on the final product which contains this module.
Contains IC: 772C-LB1PJ
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
*When the product is small, as for these words mentioned above, the posting to a manual is possible.
5150-5250 MHz band is restricted to indoor operation only.
La bande 5150-5250 MHz est restreinte à une utilisation à l’intérieur seulement.
High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and
5650-5850
MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Les radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les
bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des
dommages aux dispositifs LAN-EL.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
37 / 38
●When installing it in a mobile equipment. Please describe the following warning to the manual.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and
operated keeping the radiator at least 20cm or more away from person’s body.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement
non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet
équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps
humain.
RF Exposure requirements are met when installed in mobile equipment.
This module cannot be installed in portable equipment without further testing and a change to FCC's grant of
authorization.
Contact Murata regarding portable applications.
Note)
Portable equipment : Equipment for which the spaces between human body and antenna are used within
20cm.
Mobile equipment : Equipment used at position in which the spaces between human body and antenna
exceeded 20cm.
This device is intended only for OEM integrators under the following conditions: (For module
device use)
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
3)The use of an antenna with gain less than 3.1 dBi(2.4GHz) and 2.8 dBi(5GHz).
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes:
(Pour utilisation de dispositif module)
1)L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et
les utilisateurs, et
2)Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Tant que les 3 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas
nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour
toutes exigences de conformité supplémentaires requis pour ce module installé.
Data transmission is always initiated by software, which is the passed down through the MAC, through
the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the
MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then
turns off at the end of the packet. Therefore, the transmitter will be on only while one of the
aforementioned packets is being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or operational failure.
La transmission des données est toujours initiée par le logiciel, puis les données sont transmises par
'intermédiaire du MAC, par la bande de base numérique et analogique et, enfin, à la puce RF. Plusieurs
paquets spéciaux sont initiés par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de
base numérique active l'émetteur RF, puis désactive celui-ci à la fin du paquet. En conséquence,
l'émetteur reste uniquement activé lors de la transmission d'un des paquets susmentionnés. En
d'autres termes, ce dispositif interrompt automatiquement toute transmission en cas d'absence
d'information à transmettre ou de défaillance.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Preliminary Specification Number : SP-ZZ1PJ-F
38 / 38
IMPORTANT NOTE:
In the event that these conditions cannot be met (for example certain laptop configurations or
co-location with another transmitter), then the Canada authorization is no longer considered valid and
the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate
Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations
d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada
n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces
circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et
'obtention d'une autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such
that 20 cm may be maintained between the antenna and users. The final end product must be labeled
in a visible area with the following: “Contains IC: 772C-LB1PJ ”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut
être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les
utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante:
"Contient des IC: 772C-LB1PJ ".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install
or remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la
façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui
intègre ce module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et
avertissements comme indiqué dans ce manuel.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Producer                        : Microsoft® Word 2010
Format                          : application/pdf
Creator                         : MM04133
Creator Tool                    : Microsoft® Word 2010
Create Date                     : 2018:01:30 09:35:07+08:00
Modify Date                     : 2018:02:07 09:28:27+08:00
Metadata Date                   : 2018:02:07 09:28:27+08:00
Document ID                     : uuid:30D07A19-E092-42D0-8B8E-4158709D1233
Instance ID                     : uuid:a8c78aa6-26df-4c9e-9503-b7f17d34b254
Part                            : 1
Conformance                     : A
Page Count                      : 39
Author                          : MM04133
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VPYLB1PJ

Navigation menu