Murata LBEE5HY1MW Communication Module User Manual LBWA1ZZ1CA Installation Manual

Murata Manufacturing Co., Ltd. Communication Module LBWA1ZZ1CA Installation Manual

Contents

User Manual_Installation

1Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2018CONFIDENTIALLBEE5HY1MW Installation Manual FCC ID of this product is as follows. FCC ID: VPYLBEE5HY1MWIC No. of this product is as follows. IC : 772C-LBEE5HY1MWContents 1.Land Pattern (Recommended)2.PIN Layout3.Supply Voltage4.Theory of Operation-Channel List5. Antenna
2Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2018CONFIDENTIAL1. Land Pattern TOP ViewUnit : mm
3Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2018CONFIDENTIAL2. PIN Layout
4Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2018CONFIDENTIAL3. Supply Voltage*1: Surface temperature of the shield caseFunctionality is guaranteed but specifications require derating at extreme temperatures*2: VIO don’t influence the RF characteristic. Tolerance of 1.8V and 3.3V is ±10%.Parameter Min. Typ. Max. UnitOperating Temperature*1 -30 25 +85 deg.CSupply VoltageVBAT3.2 3.3 4.8 VVIO*2 1.8V/3.3V 1.62 - 3.63 V
5Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2018CONFIDENTIAL4. Theory of Operation-Channel ListFrequency of operation Scan Ad-hoc mode2.4GHz 11b/g/n (HT20) 2412-2462MHz Active YesBT 2402-2480MHz N/A N/ABLE 2402-2480MHz N/A N/AW52 11a/n/ac ((V)HT20) 5180-5240MHz Active Yes11n/ac ((V)HT40) 5190-5230MHz Active Yes11ac (VHT80) 5210MHz Active YesW53 11a/n/ac ((V)HT20) 5260-5320MHz Passive No11n/ac ((V)HT40) 5270-5310MHz Passive No11ac (VHT80) 5290MHz Passive NoW56 11a/n/ac ((V)HT20) 5500-5720MHz * Passive No11n/ac ((V)HT40) 5510-5710MHz * Passive No11ac (VHT80) 5530-5690MHz * Passive NoW58 11a/n/ac ((V)HT20) 5745-5825MHz Active Yes11n/ac ((V)HT40) 5755-5795MHz Active Yes11ac (VHT80) 5775MHz Active Yes* The frequency band 5600MHz-5640MHz (11a/n/ac 20M band), 5590MHz-5630MHz (11n/ac 40M band) and5610MHz (11ac 80M band) is restricted in ISED.Notes: End users can not modify the software because F/W & driver are installed in device.Theory of Operation-Software Security and Channel List
6Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 30 January 2018CONFIDENTIAL5. Antenna■Please perform the antenna design that followed the specifications of the antenna.■About the signal line between an antenna and a moduleIt is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network.However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points. １）It is the same type as the antenna type of antenna specifications.２）An antenna gain is lower than a gain given in antenna specifications.３）The emission level is not getting worse.■50-ohm line(microstrip line length)AntennaAntenna type Monopole pattern antenna50-ohm feed line length We test it at 0mm as a representative

Navigation menu