Murata LXRF052 UHF RFID Reader/Writer User Manual 05 X

Murata Manufacturing Co., Ltd. UHF RFID Reader/Writer 05 X

05 User Manual

User Manual    Since this module is not sold to general end users directly, there is no user manual of module.  For the details about this module, please refer to the specification sheet of module.     This  module  should  be  installed  in  the  host  device  according  to  the  interface  specification  (installation procedure).
The following information must be indicated on the host device of this module;     [for FCC]    Contains Transmitter Module FCC ID: VPYLXRF052 or Contains FCC  ID: VPYLXRF052   This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *If it is difficult to describe this statement on the host device due to the size, please describe in the user's manual and also either describe on the device packaging or on a removable label attached to the device.      [for ISED(IC)]    Contains IC: 772C-LXRF052
The following statements must be described on the user manual of the host device of this module;  [for FCC]      FCC CAUTION Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for  compliance could void the user’s authority to operate the equipment.  This transmitter  must not be  co-located or  operated in  conjunction with any other  antenna or transmitter.  This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled environment  and  meets  the  FCC  radio  frequency  (RF)  Exposure  Guidelines.  This  equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
 [for ISED(IC)]     This  device  contains  licence-exempt  transmitter(s)/receiver(s)  that  comply  with  Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This  device  must  accept  any  interference,  including  interference  that  may  cause  undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1.L’appareil ne doit pas produire de brouillage; 2.L’appareil  doit  accepter  tout  brouillage  radioélectrique  subi,  même  si  le  brouillage  est susceptible d’en compromettre le fonctionnement.  This  equipment  complies  with  ISED  radiation  exposure  limits  set  forth  for  an  uncontrolled environment  and  meets  RSS-102  of  the  ISED  radio  frequency  (RF)  Exposure  rules.  This equipment should  be installed  and operated  keeping the  radiator at  least 20cm  or  more away from person’s body.     Cet  équipement  est  conforme  aux  limites  d’exposition  aux  rayonnements  énoncées  pour  un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’ISDE. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.
The following notice is not for end users but for the manufacturer of the host device. Therefore it isn’t described on the user manual of the host device.  This radio transmitter (772C-LXRF052) has been approved by Innovation, Science and Economic Development  Canada  to  operate  with  the  antenna  types  listed  below,  with  the  maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Antenna type  Gain  Impedance   LXRFZZUCCA-034     -1.6 dBi  50 ohm LXRFZZUCCA-036  -16.0 dBi  50 ohm  Le  présent  émetteur  radio  (772C-LXRF052)  a  été  approuvé  par  Innovation,  Sciences  et Développement économique Canada  pour  fonctionner  avec les  types  d'antenne énumérés  ci‑dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont  le  gain  est  supérieur  au  gain  maximal  indiqué  pour  tout  type  figurant  sur  la  liste,  sont strictement interdits pour l'exploitation de l'émetteur.     Type d’antenne  Gain  l'impédance   LXRFZZUCCA-034     -1.6 dBi  50 ohm LXRFZZUCCA-036  -16.0 dBi  50 ohm

Navigation menu