Murata LXRF052 UHF RFID Reader/Writer User Manual 05 X

Download:
Mirror Download [FCC.gov]
Document ID	4159993
Application ID	kEn7DK+CdnnyjFlWV00Gxg==
Document Description	05 User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.22kB (140241 bits)
Date Submitted	2019-02-03 00:00:00
Date Available	2019-02-03 00:00:00
Creation Date	2019-01-08 11:32:54
Producing Software	Acrobat Distiller 15.0 (Windows)
Document Lastmod	2019-01-08 11:32:54
Document Title	Microsoft Word - 05 User Manual.DOCX
Document Creator	PScript5.dll Version 5.2.2
Document Author:	37366

User Manual
Since this module is not sold to general end users directly, there is no user manual of module.
For the details about this module, please refer to the specification sheet of module.
This module should be installed in the host device according to the interface specification (installation
procedure).
The following information must be indicated on the host device of this module;
[for FCC]
Contains Transmitter Module FCC ID: VPYLXRF052
or
Contains FCC ID: VPYLXRF052
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host device due to the size, please describe in the user's
manual and also either describe on the device packaging or on a removable label attached to the device.
[for ISED(IC)]
Contains IC: 772C-LXRF052
The following statements must be described on the user manual of the host device of this module;
[for FCC]
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment
should be installed and operated keeping the radiator at least 20cm or more away from person’s
body.
[for ISED(IC)]
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions:
1.This device may not cause interference.
2.This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1.L’appareil ne doit pas produire de brouillage;
2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20cm or more away
from person’s body.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un
environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques
(RF) CNR-102 de l’ISDE. Cet équipement doit être installé et utilisé en gardant une distance de
20 cm ou plus entre le radiateur et le corps humain.
The following notice is not for end users but for the manufacturer of the host device.
Therefore it isn’t described on the user manual of the host device.
This radio transmitter (772C-LXRF052) has been approved by Innovation, Science and Economic
Development Canada to operate with the antenna types listed below, with the maximum
permissible gain indicated. Antenna types not included in this list that have a gain greater than
the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Antenna type
Gain
Impedance
LXRFZZUCCA-034
-1.6 dBi
50 ohm
LXRFZZUCCA-036
-16.0 dBi
50 ohm
Le présent émetteur radio (772C-LXRF052) a été approuvé par Innovation, Sciences et
Développement économique Canada pour fonctionner avec les types d'antenne énumérés ci‑
dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et
dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont
strictement interdits pour l'exploitation de l'émetteur.
Type d’antenne
Gain
l'impédance
LXRFZZUCCA-034
-1.6 dBi
50 ohm
LXRFZZUCCA-036
-16.0 dBi
50 ohm

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 37366
Create Date                     : 2019:01:08 11:32:54+09:00
Modify Date                     : 2019:01:08 11:32:54+09:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 15.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - 05 User Manual.DOCX
Creator                         : 37366
Document ID                     : uuid:48bdca6f-2a74-4a0e-a088-8a36d0daa169
Instance ID                     : uuid:6f6ad708-5eba-46f4-aaf0-d249aa011fcd
Page Count                      : 5

EXIF Metadata provided by EXIF.tools