Mustek Systems 839692 Wireless Scanner User Manual S400W User Guide EN indd
Mustek Systems Inc Wireless Scanner S400W User Guide EN indd
Users Manual
Works with iScan Air Scanner App Wireless Scanner For mobile devices, and computers S400W All trademarks are the property of their respective owners and all rights are acknowledged. Wi-Fi® 802.11g/n Supported U s e r G uide A4 A4 A6 A6 A8 A8 POWER POWER Compatible with iOS, Mac OS X, Android OS, and Windows 8 V1.3 Safety and Precautions • Never store the unit in hot, or very cold, or humid or dusty places. • For an extended storage period, we recommend storing the unit in a cool and dry place. • To help keep the scanning area clean, store the unit in a proper case when not in use. • If the unit is left in extreme cold or hot conditions, allow to adjust to normal room temperatures before use. • Only use accessories included with the unit. • When left unused for a long period of time, the unit should be disconnected from the power supply. • Always handle the unit with care. Avoid dropping and strong impact. • Keep the lens and roller clean and free from scratches. • Do not scan sharp objects or hard abrasive surfaces to avoid damage to the lens and other parts • Operate the unit on a level, well-grounded work surface, and free of excessive vibration. • Don’t open the unit. Risk of electric shock. • Use only a soft damp cloth to clean the exterior areas of the unit. • Do not leave the unit within the reach of children. Discarded electrical and electronic appliance are recyclable and should separate from the household waste. Please actively support in conserving resources and protecting the environment by returning this appliance to the collection centers (if available). Contents Safety and Precautions ...........................................2 Contents ....................................................................3 Supported Devices .................................................4 Unpack .......................................................................5 Scanner Parts ...........................................................6 Charge the Battery ...................................................7 Download and Install iScan Air ..............................8 From iPad, iPhone, and iPod touch ......................................8 From Android mobile devices ...............................................9 From Mac computers ............................................................9 From Windows 8 devices ....................................................10 Connect via Wi-Fi Network ................................... 11 Scan and Save ........................................................13 From iPad, iPhone, and iPod touch ....................................13 From Android mobile devices .............................................14 From Mac computers ..........................................................15 From Windows 8 devices ....................................................16 Use the Photo Sleeve ............................................17 Calibrate ..................................................................18 From iPad, iPhone, and iPod touch ....................................18 From Android mobile devices .............................................19 From Mac computers ..........................................................20 From Windows 8 devices ....................................................21 Clean Rollers...........................................................22 From iPad, iPhone, and iPod touch ....................................22 From Android mobile devices .............................................23 From Mac computers ..........................................................24 From Windows 8 devices ....................................................25 Clean Lens ............................................................. 26 Helpful Hints ...........................................................27 Specifications .........................................................28 Supported Devices Wireless Scanner is compatible with following devices: iPad (3rd generation), iPad 2, iPad, iPad mini with iOS 5.0 or later. iPhone 5, iPhone 4S, iPhone 4, iPod touch with iOS 5.0 or later. Android mobile devices (including tablets and smartphones) with OS 4.0 or later. Mac computers with OS X 10.7 or later. Windows 8 devices (including computers, tablets and smartphones). Unpack Make sure following items are included. A4 A4 A6 A6 A8 A8 POWER POWER Wireless Scanner USB Cable Calibration Card Cleaning Strip Photo Sleeve User Guide Cleaning Board Scanner Parts Wi-Fi LED Indicator Feed Slot A4 A4 Paper Guide Exit Slot Power LED Indicator A6 A6 A8 A8 POWER RESET POWER Reset Pin-hole (System Shutdown) POWER Button Mini USB Port (Charge Only) Charge the Battery Wireless Scanner has a built-in rechargeable battery to provide power, make sure it has been fully charged before use. 1. 2. Press POWER button to turn Off the Scanner. The Power LED indicator shall turn off. Connect the USB cable to the Scanner at small end and to a computer ( A ) or to USB power adapter ( B ) at the other end. 3. • • • • The Power LED indicator shall emit red light to indicate the battery is charging. Once the battery is fully charged, the Power LED shall turn off, then disconnect the USB cable from the Scanner. NOTES Charge the Scanner for approximately 4 hours or until the Power LED indicator turns off. When a low battery alerts (a green Power LED blinks), charge the Scanner immediately. Scanner will not charge while operating. Ensure Scanner’s power is off when charging battery. The rechargeable battery is consumable. The battery capacity will decreased gradually. NOTE: E: USB power adapter not included. Use the USB power adapter provided with your mobile device to connect a power socket. Download and Install iScan Air Wireless Scanner includes free iScan Air apps to work on iPad, iPhone, iPod touch, Android mobile devices, Windows 8 devices, and Mac computers. You need to download and install iScan Air from Internet on your device before use. 1. From iPad, iPhone, and iPod touch App Store from your mobile Open the device. 2. Type ‘iScan Air’ in the search field. 3. Select iScan Air and follow on-screen instruction to download and install it to your device. From Android mobile devices 1. Open the device. Play Store from your mobile 2. Type ‘iScan Air’ in the search field. 3. Select iScan Air and download it to your device. iScan Air Search ‘iScan Air’ in the App Store. TBD iiScan Scan Air Search ‘iScan Air’ in the Play Store. Download and Install iScan Air (Continued) From Mac computers Open the 2. Type ‘iScan Air’ in the search field. 3. Select iScan Air and follow on-screen instruction to download and install it to Mac. • • Search ‘iScan Air’ in the Mac’s App Store. App Store from your Mac. 1. iScan Air iScan Air NOTES Ensure that your device has Internet access via your service provider or wireless connection. Do not perform other activities on your device while downloading iScan Air app. TBD Download and Install iScan Air (Continued) From Windows 8 devices 1. Open the Windows Store from your devices. 2. TBD 10 TBD Connect via Wi-Fi Network Wireless Scanner incorporates Wi-Fi capabilities with soft AP (access point) function which enables to share it to multiple devices. Follow below steps to connect Wireless Scanner to your iPad, iPhone, iPod touch, Android mobile devices, Windows 8 devices, and Mac computers via an existing Wi-Fi network in your location. 1. ON - Press POWER 2 secs, the Power LED will emit a steady green light. OFF - Press POWER 4 secs, the Power LED will turn off. Press and hold POWER button for 2 seconds to turn Wireless Scanner on. * The Power LED indicator shall emit green. Wait approximately 20 seconds for Wireless Scanner to initialize, and then the Wi-Fi LED indicator shall blink blue light to indicate Wi-Fi function is enabled. 2. Enable the Wi-Fi mode on your device, and search for available wireless networks. Find the network name “DIRECT-xxxxxx_iScanAir” for Wireless Scanner. * The "xxxxxx" in the network name is a 6-digit code randomly assigned for your Wireless Scanner. 3. Input 8-digit password “12345678” to connect to Wireless Scanner. Wi-Fi On Connected Blinking Blue LED - Wi-Fi function is enabled. Steady Blue LED - Wireless Scanner is connected to a device. * The Wi-Fi indicator shall stop blinking and remain a steady blue light after connected. 11 Connect via Wi-Fi Network 4. (Continued) Now, Wireless Scanner has been connected to your device successfully and is ready for use. NOTES • • Connection and communication errors may occur during operations due to unexpected factors. If you encounter an error, restart Wireless Scanner and reconnect it via your device again. The signal strength, network traffic, network environments and other conditions may affect Wireless transmission performance. If you find your Wireless Scanner is behaving abnormally we recommend that you shutdown Wireless Scanner by placing a pin into the RESET pin-hole located on the back of Wireless Scanner, and RESET gently push until you feel a soft click. Wireless Scanner shall perform a system shutdown. Please turn it on and try your connection again. Place a pin into the RESET pin-hole. 12 A4 A4 A6 A6 A8 A8 POWER POWER Scan and Save NOTES Ensure Wi-Fi function is enabled on Wireless Scanner and connected to your device prior to use. From iPad, iPhone and iPod touch 1. Tap 2. Place a photo/document facing up, adjust the Paper Guide, slightly push photo/document in until it is gripped by the rollers and pulled into the Feed Slot. 3. Tap the Scan button. The device’s screen shall show a real-time preview while scanning. 4. Tap the Save button to save the scan result to the device’s photo library. iScan Air on your device to open it. If you want to scan it again press Cancel button and repeat the above steps. IMPORTANT When using Scanner the first time with devices running on iOS 6 or later, a message ‘iScan Air Would Like to Access Your Photos’ shall appear after pressing SAVE button. You must tap ‘OK’ in order to save image to your Photos library. If you select ‘Don’t Allow’, no image will be saved in your device, and you will get an Error message for next scan. Please follow onscreen message to solve the problem by selecting Settings > Privacy > Photos > iScan Air > "ON" to allow the iScan Air app to access your photos. 13 Scan and Save (Continued) From Android mobile devices Tap 2. Place a photo/document facing up, adjust the Paper Guide, slightly push photo/document in until it is gripped by the rollers and pulled into the Feed Slot. 3. Tap the Scan button. The device’s shall show a real-time preview while scanning. 4. Tap the Save button to save the scan result to the device’s gallery. 14 iScan Air on your device to open it. 1. If you want to scan it again press Cancel button and repeat the above steps. Scan and Save (Continued) From Mac computers 1. Tap 2. Place a photo/document facing up, adjust the Paper Guide, slightly push photo/document in until it is gripped by the rollers and pulled into the Feed Slot. 3. Press the Scan button. The device’s shall show a real-time preview while scanning. 4. Press the Save button to bring up a 'Save as' dialog box, save the scan result with a chosen file name and directory, or press the Export to iPhoto to export it to the iPhoto. iScan Air on your device to open it. If you want to scan it again press Cancel button and repeat the above steps. 15 Scan and Save (Continued) From Windows 8 devices 1. Press 2. Place a photo/document facing up, adjust the Paper Guide, slightly push photo/document in until it is gripped by the rollers and pulled into the Feed Slot. 3. Tap the Scan button. The device’s shall show a real-time preview while scanning. 4. Tap the Save button to save the scan result to the device’s gallery. TBD 16 on your device to open it. If you want to scan it again press Cancel button and repeat the above steps. TBD Use the Photo Sleeve Use the Photo Sleeve when photos are fragile or small to avoid damage or jams, and get the best result. 1. Remove the plastic foil on the Sleeve, place the photo inside of it, insert the tongue into the slot at the open end. 2. Insert the sealed end of the Sleeve facing up into the Feed Slot, adjust the Paper Guide, then follow the 'Scan and Save' procedures to start scanning to a device. A4 A6 A8 POWER The sealed end goes in first. 17 Calibrate If dark lines or stripes appeared on the scanned image, please perform the calibration of Wireless Scanner. NOTES • To get the best scan quality, perform the calibration periodically. • Make sure the Calibration Card is clean and free of dust before use. From iPad, iPhone and iPod touch 1. Tap iScan Air app. Tap the (Settings) at the top-right corner of the app to bring up the menu, then select the Calibrate setting. 2. 3. Remove the plastic foil on the Calibration Card, insert it in the Feed Slot with the arrow mark facing up and pointing to the Scanner. Tap the Calibrate button. * The Calibration Card will be automatically pulled into Wireless Scanner, wait until the Card is ejected with a 'Calibration done.' message. Tap the OK button. 18 A4 A6 A8 POWER Calibrate (Continued) From Android mobile devices 1. Tap iScan Air app. Tap the (Settings) at the top-right corner of the app to bring up the menu, then select the Calibrate setting. 2. 3. If your Android device has a 'Menu' button press it to bring up the menu. Remove the plastic foil on the Calibration Card, insert it in the Feed Slot with the arrow mark facing up and pointing to Wireless Scanner. Tap the Calibrate button. * The Calibration Card will be automatically pulled into Wireless Scanner, wait until the Card is ejected with a 'Calibration done.' message. A4 A6 A8 POWER 19 Calibrate (Continued) From Mac computers 1. Press iScan Air app. Press the Settings at the top-left corner of the Mac's screen, select the Calibrate setting. 2. 3. Remove the plastic foil on the Calibration Card, insert it in the Feed Slot with the arrow mark facing up and pointing to Wireless Scanner. Tap the Calibrate button. * The Calibration Card will be automatically pulled into Wireless Scanner, wait until the Card is ejected with a 'Calibration done.' message. Tap the OK button. 20 A4 A6 A8 POWER Calibrate (Continued) From Windows 8 devices 1. Press on your device to open it. 2. Press the XXX on the device. Tap XXX at the top-right corner of the app to bring up the menu, and then select the Calibrate setting. 3. Remove the plastic foil on the Calibration Card, insert it in the Feed Slot with the arrow mark facing up and pointing to Wireless Scanner. 4. Tap the Calibrate button. TBD TBD * The Calibration Card will be automatically pulled into Wireless Scanner, wait until the Card is ejected. 21 Clean Rollers Dirt and dust can build up inside Wireless Scanner and affect image quality, please clean Wireless Scanner periodically to get the best result. Use the Cleaning Board included with Wireless Scanner to clean rollers. 1. From iPad, iPhone and iPod touch Tap iScan Air app. Tap the (Settings) at the top-right corner of the app to bring up the menu, then select the Clean setting. 2. 3. Hold the Cleaning Board with the sponge stopper strip facing down towards you. Tap the Clean button. * The Cleaning Board will be automatically pulled into Wireless Scanner, wait until the Board is ejected with a 'Cleaning done.' message. Tap the OK button. 22 A4 A6 A8 POWER Clean Rollers (Continued) From Android mobile devices 1. Tap iScan Air app. Tap the (Settings) at the top-right corner of the app to bring up the menu, then select the Clean setting. 2. 3. If your Android device has a 'Menu' button press it to bring up the menu. Hold the Cleaning Board with the sponge stopper strip facing down towards you. Tap the Clean button. * The Cleaning Board will be automatically pulled into Wireless Scanner, wait until the Board is ejected with a 'Cleaning done' message. A4 A6 A8 POWER 23 Clean Rollers (Continued) From Mac computers 1. Press iScan Air app. Tap the Settings at the top-left corner of the device's screen, select the Clean setting. 2. 3. Hold the Cleaning Board with the sponge stopper strip facing down towards you. Tap the Clean button. * The Cleaning Board will be automatically pulled into Wireless Scanner, wait until the Board is ejected with a 'Cleaning done.' message. Tap the OK button. 24 A4 A6 A8 POWER Clean Rollers (Continued) From Windows 8 devices 1. Press 2. Press the XXX on the device. Tap XXX at the top-right corner of the app to bring up the menu, and then select the Clean setting. 3. Hold the Cleaning Board with the sponge stopper strip facing down towards you. Tap the Clean button. 4. on your device to open it. TBD * The Cleaning Board will be automatically pulled into Wireless Scanner, wait until the Board is ejected with a success message. TBD 25 Clean Lens Dirt and dust can build up inside Wireless Scanner and affect image quality, please clean Wireless Scanner periodically to get the best result. Please use the Cleaning Strip included with Wireless Scanner to clean the lens. 1. 2. 3. 4. 26 Turn off Wireless Scanner. Hold the Cleaning Strip with the sponge grip handle facing down. Insert the thinner end into the Exit Slot at the rear of Wireless Scanner. Move the Strip from side to side few times, then remove it. Helpful Hints Scanner does not turn on. Check if the POWER button is pressed on. • Check if Wireless Scanner is charged. • Scanner cannot connect to a mobile device or computer. Check if the Wi-Fi signal strength is sufficient. Try moving closer to the Wi-Fi router or base station. • Make sure the Wi-Fi LED indicator of Wireless Scanner is flashing blue. • Check that the network settings on your device is matched to Wireless Scanner. • Check if Wireless Scanner is being used by another user, please wait and try again later. • No output from Scanner. Check if the Wi-Fi connection is disconnected. Re-connect it and try again. • Check if connection and/or communication errors occurred while scanning. Restart your Scanner and re-connect it. • Reset Wireless Scanner, then turn power back on and try again. • Scanner behaves abnormally Place a pin into the RESET pin-hole located on the back of the Scanner to shutdown system, then restart the • Scanner. Cannot save scan results to a mobile device or computer. Check if the storage memory of the device or computer is full. • Check if Wireless Scanner and the mobile device has a low power. Charge them to a full power capacity. • Scan result is poor. Calibrate and clean Wireless Scanner when the scan result is poor. • Do not use the Photo Sleeve when the photo is laminated. • Cannot feed the paper. Make sure the photo/document is gripped and slightly pulled into the feed slot prior to scanning. • Remove the photo/document from the feed slot and insert it again. • Check if the paper thickness is exceeded the limit. Acceptable paper thickness is 0.08mm ~ 0.6mm. • Do not scan more than one page at a time; otherwise the extra pages may not feed properly. • 27 FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." Specifications Scanner Type Image Sensor Light Source Scan Size (Max.) Scan Thickness Scan Resolution Scan Speed Interface File Format Power Power Consumption Battery Battery Capacity Scans per Charge Power Saving Charge Time Wi-Fi Capability Dimensions Weight Operating Conditions 28 A4 color sheetfed scanner Color CIS (Contact Image Sensor) LED (R, G, B) W 216mm x L 356 mm (W 8.5" x L 14") 0.08mm ~ 0.6mm 300 dpi 12 seconds per page (A4 color) at 300 dpi USB mini-B port (charge only); Reset pin-hole (system shutdown) JPEG 5Vdc 4.2W (Max.) Lithium polymer battery 1500mAh (built-in) Approx. 1.5 hours of continuous use after fully charged. Approx. 300 pages of continuous use after fully charged. Auto power off in 5 minutes when not in use. Approx. 4 hours. Radio Frequency 2.4GHz~2.472GHz compliant 802.11g/n protocol Configuration Soft AP (access point) supported Security WPA2 273 x 70 x 50 mm (10.6" x 2.8" x 2") (W x D x H) 574g (1.27lbs) 5°C ~ 35°C (41°F ~ 95°F), humidity range 35% ~ 80% RH; Non-condensing
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : maria Create Date : 2012:11:14 16:09:51+08:00 Modify Date : 2013:07:15 18:23:17+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : maria Title : S400W_User_Guide_EN.indd Creator Tool : Adobe InDesign CS6 (Windows) Metadata Date : 2013:07:15 18:23:17+08:00 Producer : Acrobat Distiller 8.0.0 (Windows) Document ID : uuid:2b952bd7-7779-493f-a4c9-69d260b80219 Instance ID : uuid:0dbee1ad-79bb-492d-bc1d-ab174382058a Page Mode : UseThumbs Page Count : 29EXIF Metadata provided by EXIF.tools