Mustek Systems BEARPAW USB Flatbed Color Scanner User Manual
Mustek Systems Inc USB Flatbed Color Scanner
User Manual
Introducing o’ ‘o Be@rPaw 1200 Mustek Sy nc. Mustek ,_ V. . a loo Ifliflwrzeiamu/ msmffiijs MANUAL ' FEDERAL CONWIUNICATIONS COMMISSION - INTERFERENCE STATEMENT This equipment has been tested and found to comply vwith the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception; which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ~- Reorient or relocate the receiving antenna ~- Increase the separation between the equipment and receiver, -- Connect the euipment into an outlet on a circuir different from that to which the receiver is connected. »- Consult the dealer or an experienced radio/TV technician for help. CAUTION: To assure continued FCC compliance: (1) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the euipment. FCC Label Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. , Unpacking the Scanner Unpack the package and inspect the items closely to make sure no item is damaged. The package should include: I The Scanner I PowerAdapter I BearPaw ScamierUser‘s Guide I Installation CD I Scanning Utilities Manual (eitherincluded in the Installation CD or printed separately) Installing Drivers wrote i}, flaw. Please complete the software drivers installation before installing the scanner. Do not connect the power adapter to the scanner at this stage. ll Insert the Driver Installation CD into your disk drive 2. Follow all on screen instructions. » If, afier inserting the Driver Installation CD into your disk drive, the Driver Installation Welcome screen does not appear, do the following: 14 Click onStart and selectRimr 24 In the Rim dialog box, type drive:\run where drive is your CD-ROM drive and click OK When you are presented with the option of whether to restart Windows® after completing the software drivers installation please choose Yes. The Scanner Parts Document cover Back of the scanner LEDIamp Control panel Installing Hardware Refer to the following illustration and steps to connect your scanner: 1. With the power to your PC on, connect the scanner’s USB cable to the USB port of your PC. 2. Connect the power adapter to the scanner and plug it into an appropriate power outlet. Upon connecting the power adapter, the Windows® operating system would automatically detect your scanner and update your system configuration Scanner USB cable/ '- PowerOutIet Specifications . Scan Area A 21.6 cm x 29. 7cm (8 5" x 11.7") TnJe Color 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 1999:12:17 17:02:50-05:00 Create Date : 1999:12:17 17:02:24-05:00 Creator : Acrobat 4.0 Scan Plug-in for Windows Producer : Acrobat 4.0 Scan Plug-in for Windows Page Count : 5EXIF Metadata provided by EXIF.tools