Mustek Systems MBTH120 BT-DH User Manual BT Headset En indd

Download:
Mirror Download [FCC.gov]
Document ID	526795
Application ID	iH7SgYoTR+gD6zSzLtV6Kg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	130.87kB (1635856 bits)
Date Submitted	2005-03-25 00:00:00
Date Available	2005-03-24 00:00:00
Creation Date	2005-03-09 14:36:12
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2005-03-18 12:27:13
Document Title	BT_Headset_En.indd
Document Creator	Adobe InDesign 2.0.2
Document Author:	Elena Wang

Quick Guide
EN DE FR IT ES NL PT SW DK TU PL GR RU FI TC
Headset
Model No.: MBT-H120
FCC ID: HWF-MBTH120
This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that
may cause undesired operation.
Any changes or modifications not expressly
approved by the party responsible for compliance could void the authority to operate
FOR HOME OR OFFICE USE equipment.
Tested To Comply With FCC Standards
BLUETOOTH HEADSET GETTING STARTED
Identifying the Parts
2. Power / Talking Button
3. Volume Down
EN
1. Volume Up / Pairing Button
4. Indicator LED
Red : Power Off
Blue : Power On
Red+Blue : Pairing mode
5. Earhook
6. Earphone
7. Microphone
8. DC-IN jack
BLUETOOTH HEADSET GETTING STARTED
Charging the Battery
First time use:
Please charge the built-in Li-ion battery for 24 hours before the initial use.
Low battery:
When the battery is low, the indicator
LED will flash red. Please charge the
battery for approximately 2.5 hours.
How to charge:
1. Connect one end of the supplied
AC Adapter (5V/0.5A) to the DC IN
jack on the headset and the other
end to the wall outlet.
The indicator LED will light red
when charging.
After fully charging the battery, the
indicator LED will light out.
BLUETOOTH HEADSET GETTING STARTED
Remove the AC Adapter from the
DC IN jack of the headset and the
wall outlet.
Wearing the Headset
Wearing the Headset
To wear on your left ear:
Wear the headset vertically on your
left ear. (Please refer to Figure 1)
Rotate the headset toward the rear of
your ear and point the microphone
toward your mouth. (Please refer to
EN
You can wear the headset on either
ear with the reversible earhook.
To wear on your right ear:
Reverse the earhook to change its
direction, and then follow the steps
above to wear it on your right ear.
Figure 2)
(Figure 1)
(Figure 2)
BLUETOOTH HEADSET GETTING STARTED
Powering the Headset On or Off
To power your headset on:
Press the Power button for approximately 2 seconds until the indicator
LED starts to flash blue. Then you
can start to operate your headset.
To power your headset off:
Press the Power button for approximately 2 seconds until the indicator
LED starts to flash red. Once the
indicator LED stops flashing, the
power is OFF.
BLUETOOTH HEADSET GETTING STARTED
Pairing with a Bluetooth Phone
To pair with a Bluetooth phone,
please follow the instruction below:
Ensure the headset is ON and
enters the standby mode with
flashing blue LED once rapidly
every 3 seconds.
( Note: When powered on, the headset
will attempt to connect to an available
Bluetooth device. Please press the
Power button to switch to the standby
mode. )
2. Press the Volume Up button for
approximately 4 seconds until the
indicator LED starts to flash red
and blue alternately, and enters the
pairing mode.
3. Search for Bluetooth devices by
following the phone’s operating
instruction.
4. Select “MBT-H120” from the
searched devices list and confirm it.
Enter the passkey “1234” and
confirm it.
After finishing the pairing process,
the indicator LED will flash blue.
( Notes:
1) The operable range without obstructions
is up to 10 meters (approximately 33
feet) between your headset and the
Bluetooth devices.
2) Your headset can save the pairing information of up to 8 phones, but connect to
only one phone at a time.
BLUETOOTH HEADSET GETTING STARTED
EN
Before operating your headset with a
Bluetooth phone, you must execute
“Pairing” process to create a link
between the devices.
Pairing with a Bluetooth Phone-continue
If you have entered the passkey without
previously pairing with another phone,
the phone will be the “default phone”
for your headset.
If you want to use another Bluetooth
phone with your headset, please switch
the headset off, then disconnect it from
the previous phone. Next, pair with
another phone once restarted as
described in page 7. )
BLUETOOTH HEADSET GETTING STARTED
Call Functions
When receiving a call, you will hear a
ring tone through the headset’s earphone. Press the Power/Talk button
to answer or end a call.
To make a call:
There are two ways to make a call:
1. Using your phone’s keypad:
Press the Number button you want
to call in your phone’s keypad to
make a call.
2. Using the “Voice Dialing” function
through your headset:
1) Record “Voice Tags” in your
phone address book in advance.
2) Ensure this function is ON.
3) Press the Talk button, then say
the voice tag through your
headset’s microphone.
4) After recognizing the correct
voice tag, the phone number will
be dialed automatically.
( Note: This feature is only available with
a phone that supports the ‘Voice Dialing’
function. For details, please refer to your
phone’s user guide. )
To redial the last call:
1. Press the Volume Down button for
approximately 2 seconds when no
call is in progress.
To reject a call:
1. Press the Power button for
approximately 2 seconds to reject
an incoming call.
BLUETOOTH HEADSET GETTING STARTED
EN
To answer or end a call:
Headset Indicator LED
While plugging in the charger:
Indicator LED
Headset
Light Red
Charging
Light Out
Full Charge
While unplugging the charger:
Indicator LED
Headset
Flash Red
Low Battery
Flash Red
Light Out
Power Off
Flash Blue
Power On
Flash Red and
Blue Alternately
Pairing Mode
10
BLUETOOTH HEADSET GETTING STARTED
Flash Blue LED
once rapidly
every 3 seconds
Signal Available
(Standby Mode)
Flash Blue LED
twice rapidly
every 3 seconds
Connecting
Flash Blue LED
3 times rapidly
every 3 seconds
Connected
Flash Blue LED
4 times rapidly
every 3 seconds
Connected
(On a Call)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f6699a57-686e-4bf6-ab45-9e803002e475
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creator Tool                    : Adobe InDesign 2.0.2
Modify Date                     : 2005:03:18 12:27:13+08:00
Create Date                     : 2005:03:09 14:36:12+08:00
Metadata Date                   : 2005:03:18 12:27:13+08:00
Document ID                     : uuid:c83ce48d-db01-427f-9b87-f92354f89005
Format                          : application/pdf
Title                           : BT_Headset_En.indd
Creator                         : Elena Wang
Author                          : Elena Wang

EXIF Metadata provided by EXIF.tools