NANOGRID NL08-0800 LED Light Bulb User Manual NL08 0800 IM EN
NANOGRID LIMITED LED Light Bulb NL08 0800 IM EN
NANOGRID >
User Manual
Date: 2015.06.23
Designer: JEFF
NL-08 Warning & Warranty
Size:124mm(L)x70mm(W)
Size:124mm(L)x70mm(W)
2
1
Package Content:
• The package contains the Nanoleaf Ivy LED light bulb, 800 Lumens.
• The package does NOT contain a hub to control the light; hubs
that uses Zigbee Home Automation 1.2, e.g. Almond+™, SmartThings™
and Wink™, have to be purchased separately.
Installation:
To install device, screw into an E26/E27 screw fitting. Then switch on
the power. The bulb will then be ready to use with compatible hubs.
Control the light using your smart device through the instructions that
come with your compatible hub.
Additional Dimming Functionality – Dim* Your
Lights Using the Existing Light Switch
Nanoleaf Ivy LED light bulb also comes with Nanoleaf Bloom
functions, which means it can be dimmed using a standard on/off
light switch.
The steps are:
Reboot and Factory Reset:
To reboot Nanoleaf Ivy LED light bulb, switch off the power for at least
five seconds, then power it back on.
To reset Nanoleaf Ivy LED light bulb to factory default follow these steps:
1. Power on the bulb for at least five seconds.
2. Switch the bulb off-on rapidly five times, such that off time is about
0.3 seconds and on time is about 1 second. The bulb will at this point
start flashing.
3. Wait until the flashing stops, which is a matter of a few seconds.
4. Switch off the light for at least five seconds.
After these steps the light bulb will be reset to factory defaults next time
it is powered on.
Troubleshooting:
• If your Nanoleaf Ivy LED light bulb does not pair with the home
control system:
o Move the Nanoleaf Ivy LED light bulb closer to the controller.
o Remove obstacles in the path between the Nanoleaf Ivy LED light
bulb and the controller, such as large appliances, mirrors, file cabinets,
and ensure the Nanoleaf Ivy LED light bulb nor the controller are located
near other wireless devices like a Wi-Fi access point/router.
14
Nanoleaf bulb prefers to stay dry.
7. To ensure a long and happy life for your Nanoleaf bulb, only use
in operating environments ranging between -20C to 40C. (14F to
104F). All other conditions may result in extreme sadness and early
death of the bulb.
8. Product intended for indoor use ONLY. Exploration of the bulb in
other environments are strongly unrecommended and discouraged, but
please let us know the results if you choose to take the path less
taken.
9. Emergency exit lights or fixtures are not ideal homes for the
Nanoleaf bulbs, they will be hopelessly unhappy there.
10. The Nanoleaf bulb is extremely bright... and shy...please refrain
from staring directly at it when it is turned on. If you cannot resist,
please admire it while wearing sunglasses, or your eyes may be upset
with you.
11. The Nanoleaf IVY bulb is meant to be out in the open and
admired, so it will lash out if placed into a fully enclosed fixture.
12. Once the Nanoleaf bulb is damaged, it will be polluted with evil
thoughts. Stop using immediately if the bulb becomes damaged or
open, or experience its terrible wrath and mood swings.
13
Nanoleaf Ivy Warnings
Fun Warning:
1. Electrical shocks are not as fun as they sound, please avoid
getting one by powering off the Nanoleaf bulb/light switch before
inspecting, installing, or removing the bulb.
2. Though the Nanoleaf bulb is cute and dainty, please ensure that
the lighting fixture can support the weight of this lovable invention
prior to installation, to prevent any property damage or injury from a
falling bulb.
3. Please resist from touching the Nanoleaf bulb when it is on.
However, if you must, do so at your own risk.
4. The Nanoleaf bulb, or any other bulbs, should never be installed
by children or pets.
5. The Nanoleaf bulb is not designed to be dissected. Please do not
disassemble or open the bulb. Once disassembled, the bulb will no
longer function and may expose you to electrical shock as punishment
for murdering it.
6. The Nanoleaf bulb is suitable for reasonable damp locations but
not for use where directly exposed to water/liquids. Like a cat, the
www.nanoleaf.me
1615
Safety Warnings:
Risk of Electric Shock – Do not use where directly exposed to water.
Do not insert nail, straw, thread or other object into holes on the
device surface. Do not open or attempt to open device. To prevent
property damage and injuries, ensure that the light fixture can
support the weight of the bulb. This device is not intended for use
with emergency exit fixtures. Before replacing device, turn off power
and let device cool in order to avoid burn or electric shock.
Discontinue use if damaged. Product enhancements are constantly
worked on; therefore appearance and outlook may vary and are
subject to change without notice. Operate in environments of -20C to
45C (-4F to 113F) only. Intended strictly for indoor use. Do not stare
directly at the light for long periods of time, for risk of damages to
the eyes. For lamps with a weight significantly higher than that of
the lamps for which they are a replacement, attention should be
drawn to the fact that the increased weight may reduce the
mechanical stability of certain luminaires and lampholders and may
impair contact making and lamp retention.This lamp is not suitable
for totally enclosed fixtures or insulated air-tight (ICAT) recessed
down lights.
Warranty:
Limited Warranty: 3-year free replacement limited warranty.
The warranty period is 30,000 hours or 3 years whatever comes first.
If a Product fails to operate in accordance with this limited Warranty,
Nanoleaf will, at its sole option, replace the Product with the
same or a functionally equivalent Product or grant purchaser a credit for
a future Product purchase.
For avoidance of doubt, "to replace the Product" does not include any
removal or reinstallation costs or expenses, including without limitation
labor costs or expenses, shipping costs to return non-conforming Products
or any damages that may occur during the return of Product to Nanoleaf.
This limited Warranty is subject to the following additional conditions:
• The Products have been installed and operated in accordance with
the manufacturer’s instructions and precautions.
• The Products have not been subject to accident, neglect, abuse, misuse
or acts of God.
• A Nanoleaf representative will have access to the failed Products and
the fixtures used to operate them. If the fixture or other parts become
suspect, the representative shall have the right to invite other
manufacturers’ representatives to evaluate the lighting system
components.
This device is UL and CE certified for electrical safety and Zigbee certified for
wireless interoperability.
USER MANUAL
ON
OFF
ON
OFF
ON
OFF
ON
OFF
0S 1S 2S 3S 4S 5S 6S 7S
Time
0
100%
Full
Brightness
Your current
brightness level
To lock in at
new brightness level
Scenario 2: Adjusting the brightness when the bulb is already
ON. Quickly* flick the switch OFF/ON to initiate dimming of
the bulb while it is ON. Then, quickly flick the switch OFF/ON
again to lock in the desired brightness level.
SHAPE A19(A60)
FITTING E26/E27/B22
RATED POWER USED 7W
LIGHT OUTPUT 800 Lumens
EFFICIENCY 114 Lm/W
LIFETIME 30,000 hours
COLOR TEMPERATURE 3000K Warm White
WEIGHT 92 grams
OPERATING TEMPERATURE -20 C to 45 C
OPERATING VOLTAGE 100-240V
USAGE Indoor Use Only
CRI 81
1211
Recycle Your Nanoleaf Ivy Bulbs
Nanoleaf Ivy LED light bulb is made out of materials used in
electronic equipment, such as computers and laptops. Therefore, it
can be recycled just like any other computer electronic equipment.
Manufacturer Contact Information
Nanoleaf can be reached at hello@nanoleaf.me for questions or
problems with the Nanoleaf Ivy LED light bulb. Visit our website at
http://www.nanoleaf.me or like us on Facebook at
fb.com/thenanoleaf, follow us on twitter at @nanoleaf and follow us
on Instagram at @nanoleaf to stay updated.
Instructions on how to pair with compatible hubs:
To Pair Device to iControl
To reset to leave the current network and factory setting, perform the
following steps via a regular on-off light switch:
1. Turn on the switch
2. Flick the switch off and on five times such that the off time is about
0.3 seconds and the on time is about 1 second. The bulb will start to
flash rapidly.
3. Wait for the bulb to stop flashing and then within two seconds turn
the switch off. The bulb will be in a factory reset state the next time it
is operated and will search for a new network.
To perform a rejoin operation, perform the following steps via a regular on-off
light switch:
1. Turn on the switch
2 .Flick the switch off and on 5 times such that the off time is about 0.3
seconds and the on time is about 1 second. The bulb will start to flash rapidly.
3. Leave the light on. It will stop flashing and will then perform the rejoin
operation.
Seaching for a new network
After performing a factory reset operation, the bulb will attempt to find and join
a new network. It will make three attempts to join on the commonly used
Zigbee channels (11, 14, 15, 19, 20, 24, 25), which will be followed, by another
three attempts on all Zigbee channels (11 to 26). If a network could not be
found and joined after the six attempts then the light bulb will stop searching
and operate without wireless control. Another six attempts can be triggered
right away by cycling the power switch off and on. If no network is joined and
the light bulb remains on for over 30 minutes then it will no longer seach for
networks even if it is turned off and on. It will simply work like a regular light
with no wireless control function. To initiate a search again, the bulb must be
reset to factory settings again.
Visual indicators
While searching for a joinable network, the LED bulb will pulse its brightness
gently. Once it has joined a network, it will flash strongly five times.
During rejoining, the LED bulb will pulse its brightness gently 3 times and upon
successful rejoin will flash strongly 5 times.
0
100%
Full
Brightness
5%
0S 1S 2S 3S 4S 5S 6S 7S 8S 9S
Time
Automatically stop at
Night Mode
ON
OFF
ON
OFF
Current brightness
Option 2: Entering into Night Mode when the bulb is ON.
While the bulb is ON, quickly flick the switch OFF/ON to start
dimming the light bulb. The brightness will automatically stop
at the 5% brightness level, Night Mode.
*Nanoleaf Ivy LED light bulb is not compatible with a standard dimmer switch.
3S
Time
* Within 0.5 seconds
0S 1S 2S
0
100%
Full
Brightness
ON ON
OFF
ON
OFF
ON
OFF
Your preferred
brightness
Scenario 1: Adjusting the brightness when the bulb is OFF.
Turn the light ON, then quickly* flick the switch OFF and
ON at any time while the brightness is ramping up to lock
in the desired brightness.
4
36
5
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
• If your Nanoleaf Ivy LED light bulb was communicating with the
controller before, but is no longer:
o Ensure the Nanoleaf Ivy LED light bulb is powered on, and has not
been powered off using the wall-switch.
o Reboot the Nanoleaf Ivy LED light bulb using the instructions
previously mentioned.
FCC Caution:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
8
7
10
9
3S
Time
0
100%
Full
Brightness
5%
0S 1S 2S
Night Mode
Night Mode: Two options
Option 1: Directly enter into Night Mode when bulb is OFF.
Quickly* flick the switch ON/OFF/ON to lock the bulb into
Night Mode (5% brightness).
ONON
OFF
ON
OFF
18
THE FOREGOING WARRANTY IS EXCLUSIVE, AND THE SOLE REMEDY
FOR ANY AND ALL CLAIMS, IN CONTRACT, IN TORT OR OTHERWISE
ARISING FROM THE FAILURE OF PRODUCT AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH
WARRANTIES ARE HEREBY DISCLAIMED. THE LIABILITY OF NANOLEAF
SHALL BE LIMITED TO THE TERMS OF THE EXPRESS WARRANTY SET
FORTH HEREIN. IN NO EVENT WILL NANOLEAF BE LIABLE FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING,
WITHOUT LIMITATION, DAMAGES RESULTING FROM LOSS OF USE,
PROFITS, BUSINESS OR GOODWILL, WHETHER OR NOT NANOLEAF HAS
BEEN ADVISED OF THE POSSIBILITY THEREOF.
17
• The Product has been purchased directly from an authorized
Nanoleaf distributor/dealer/store.
• Purchase receipt must be returned along with the Products to the
Nanoleaf returns center before refund or replacement is issued.
• It is the purchaser’s responsibility to contact to purchaser’s
original point of purchase to initiate the replacement process
The warranty and remedy set forth herein do not apply to
Products, parts, advice, assistance or service which Nanoleaf furnishes
to purchaser as a business courtesy.
The warranty is not applicable to any Product which is used in
violation of any applicable standard, code or instructions for use,
including those contained in the Standards for Safety of Underwriters
Laboratory, Inc. (UL), Standards for the American Standards Institute
(ANSI), in Canada, the Canadian Standards Association (CSA), In
European Economic Area EEA, European Conformity (CE).
11custom LED
provide,
omni-directional
light
printed circuit
board body
proprietary NL
Ivy Controller
chip
Wireless control
chip and antenna
E26/E27 standard
Edison screw base
*also available in
B22 Bayonet base.
112mm
38mm
69mm
27mm
Nanoleaf Ivy
Specifications & Compliance