NANOGRID NL08-0800 LED Light Bulb User Manual NL08 0800 IM EN
NANOGRID LIMITED LED Light Bulb NL08 0800 IM EN
NANOGRID >
User Manual
NL-08 Warning & Warranty USER MANUAL Package Content: Scenario 1: Adjusting the brightness when the bulb is OFF. Scenario 2: Adjusting the brightness when the bulb is already Night Mode: Two options Option 2: Entering into Night Mode when the bulb is ON. • Turn the light ON, then quickly* flick the switch OFF and ON. Quickly* flick the switch OFF/ON to initiate dimming of Option 1: Directly enter into Night Mode when bulb is OFF. While the bulb is ON, quickly flick the switch OFF/ON to start ON at any time while the brightness is ramping up to lock the bulb while it is ON. Then, quickly flick the switch OFF/ON Quickly* flick the switch ON/OFF/ON to lock the bulb into dimming the light bulb. The brightness will automatically stop in the desired brightness. again to lock in the desired brightness level. Night Mode (5% brightness). at the 5% brightness level, Night Mode. • The package contains the Nanoleaf Ivy LED light bulb, 800 Lumens. The package does NOT contain a hub to control the light; hubs that uses Zigbee Home Automation 1.2, e.g. Almond+™, SmartThings™ and Wink™, have to be purchased separately. Control the light using your smart device through the instructions that Full Brightness 100% come with your compatible hub. ON Additional Dimming Functionality – Dim* Your Lights Using the Existing Light Switch light switch. To reset Nanoleaf Ivy LED light bulb to factory default follow these steps: Power on the bulb for at least five seconds. Switch the bulb off-on rapidly five times, such that off time is about OFF ON Full Brightness 100% ON OFF Full Brightness 100% ON OFF ON To lock in at new brightness level OFF The steps are: Time 0S 1S 2S Time 0S 1S 2S 3S 4S 5S ON OFF OFF 6S Time 0S 7S 1S 2S 3S 0S 1S 2S 3S 4S 5S 6S If your Nanoleaf Ivy LED light bulb does not pair with the home o Move the Nanoleaf Ivy LED light bulb closer to the controller. Time 7S 8S 9S o Remove obstacles in the path between the Nanoleaf Ivy LED light bulb and the controller, such as large appliances, mirrors, file cabinets, and ensure the Nanoleaf Ivy LED light bulb nor the controller are located near other wireless devices like a Wi-Fi access point/router. harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference Any Changes or modifications not expressly approved by the party equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, control system: *Nanoleaf Ivy LED light bulb is not compatible with a standard dimmer switch. * Within 0.5 seconds • Automatically stop at Night Mode previously mentioned. These limits are designed to provide reasonable protection against does cause harmful interference to radio or television reception, which Switch off the light for at least five seconds. Troubleshooting: 5% o Reboot the Nanoleaf Ivy LED light bulb using the instructions limits for a Class B digital device, pursuant to part 15 of the FCC Rules. responsible for compliance could void the user’s authority to operate the Wait until the flashing stops, which is a matter of a few seconds. it is powered on. Current brightness Night Mode 5% 3S ON ON been powered off using the wall-switch. Note: This equipment has been tested and found to comply with the 3. After these steps the light bulb will be reset to factory defaults next time OFF ON OFF OFF Your preferred brightness ON OFF o Ensure the Nanoleaf Ivy LED light bulb is powered on, and has not to radio communications. However, there is no guarantee that 4. ON If your Nanoleaf Ivy LED light bulb was communicating with the controller before, but is no longer: FCC Caution: OFF Your current brightness level ON Full Brightness 100% ON • 0.3 seconds and on time is about 1 second. The bulb will at this point start flashing. the power. The bulb will then be ready to use with compatible hubs. functions, which means it can be dimmed using a standard on/off five seconds, then power it back on. 2. To install device, screw into an E26/E27 screw fitting. Then switch on Nanoleaf Ivy LED light bulb also comes with Nanoleaf Bloom To reboot Nanoleaf Ivy LED light bulb, switch off the power for at least 1. Installation: www.nanoleaf.me Reboot and Factory Reset: interference will not occur in a particular installation. If this equipment can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: including interference that may cause undesired operation. -Reorient or relocate the receiving antenna. FCC Radiation Exposure Statement: -Connect the equipment into an outlet on a circuit different from that to Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and -Increase the separation between the equipment and receiver. which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. operated with minimum distance 20cm between the radiator & your body. Size:124mm(L)x70mm(W) Specifications & Compliance Recycle Your Nanoleaf Ivy Bulbs Nanoleaf Ivy LED light bulb is made out of materials used in Nanoleaf Ivy 11custom LED provide, omni-directional light 38mm printed circuit board body 69mm 112mm proprietary NL Ivy Controller chip Wireless control chip and antenna 27mm E26/E27 standard Edison screw base *also available in B22 Bayonet base. electronic equipment, such as computers and laptops. Therefore, it can be recycled just like any other computer electronic equipment. SHAPE A19(A60) FITTING E26/E27/B22 RATED POWER USED 7W Manufacturer Contact Information LIGHT OUTPUT 800 Lumens EFFICIENCY 114 Lm/W problems with the Nanoleaf Ivy LED light bulb. Visit our website at LIFETIME 30,000 hours COLOR TEMPERATURE 3000K Warm White on Instagram at @nanoleaf to stay updated. WEIGHT 92 grams Instructions on how to pair with compatible hubs: OPERATING TEMPERATURE -20 C to 45 C OPERATING VOLTAGE 100-240V USAGE Indoor Use Only CRI 81 This device is UL and CE certified for electrical safety and Zigbee certified for wireless interoperability. Nanoleaf can be reached at hello@nanoleaf.me for questions or http://www.nanoleaf.me or like us on Facebook at fb.com/thenanoleaf, follow us on twitter at @nanoleaf and follow us light switch: Nanoleaf Ivy Warnings 2 .Flick the switch off and on 5 times such that the off time is about 0.3 Fun Warning: 1. Turn on the switch seconds and the on time is about 1 second. The bulb will start to flash rapidly. 3. Leave the light on. It will stop flashing and will then perform the rejoin operation. Seaching for a new network After performing a factory reset operation, the bulb will attempt to find and join a new network. It will make three attempts to join on the commonly used Zigbee channels (11, 14, 15, 19, 20, 24, 25), which will be followed, by another three attempts on all Zigbee channels (11 to 26). If a network could not be found and joined after the six attempts then the light bulb will stop searching and operate without wireless control. Another six attempts can be triggered right away by cycling the power switch off and on. If no network is joined and following steps via a regular on-off light switch: networks even if it is turned off and on. It will simply work like a regular light To reset to leave the current network and factory setting, perform the 1. Turn on the switch 2. Flick the switch off and on five times such that the off time is about 0.3 seconds and the on time is about 1 second. The bulb will start to the light bulb remains on for over 30 minutes then it will no longer seach for with no wireless control function. To initiate a search again, the bulb must be reset to factory settings again. Visual indicators the switch off. The bulb will be in a factory reset state the next time it gently. Once it has joined a network, it will flash strongly five times. 11 Electrical shocks are not as fun as they sound, please avoid getting one by powering off the Nanoleaf bulb/light switch before 2. Though the Nanoleaf bulb is cute and dainty, please ensure that the lighting fixture can support the weight of this lovable invention prior to installation, to prevent any property damage or injury from a falling bulb. 3. Please resist from touching the Nanoleaf bulb when it is on. However, if you must, do so at your own risk. 4. The Nanoleaf bulb, or any other bulbs, should never be installed by children or pets. 5. The Nanoleaf bulb is not designed to be dissected. Please do not disassemble or open the bulb. Once disassembled, the bulb will no longer function and may expose you to electrical shock as punishment flash rapidly. 3. Wait for the bulb to stop flashing and then within two seconds turn 1. inspecting, installing, or removing the bulb. To Pair Device to iControl is operated and will search for a new network. 10 To perform a rejoin operation, perform the following steps via a regular on-off While searching for a joinable network, the LED bulb will pulse its brightness During rejoining, the LED bulb will pulse its brightness gently 3 times and upon successful rejoin will flash strongly 5 times. 12 for murdering it. 6. The Nanoleaf bulb is suitable for reasonable damp locations but not for use where directly exposed to water/liquids. Like a cat, the 13 Nanoleaf bulb prefers to stay dry. Safety Warnings: Warranty: • The Product has been purchased directly from an authorized THE FOREGOING WARRANTY IS EXCLUSIVE, AND THE SOLE REMEDY in operating environments ranging between -20C to 40C. (14F to Do not insert nail, straw, thread or other object into holes on the The warranty period is 30,000 hours or 3 years whatever comes first. • Purchase receipt must be returned along with the Products to the ARISING FROM THE FAILURE OF PRODUCT AND IS IN LIEU OF ALL 7. To ensure a long and happy life for your Nanoleaf bulb, only use 104F). All other conditions may result in extreme sadness and early Risk of Electric Shock – Do not use where directly exposed to water. device surface. Do not open or attempt to open device. To prevent death of the bulb. property damage and injuries, ensure that the light fixture can other environments are strongly unrecommended and discouraged, but with emergency exit fixtures. Before replacing device, turn off power 8. Product intended for indoor use ONLY. Exploration of the bulb in please let us know the results if you choose to take the path less taken. 9. Emergency exit lights or fixtures are not ideal homes for the Nanoleaf bulbs, they will be hopelessly unhappy there. 10. The Nanoleaf bulb is extremely bright... and shy...please refrain support the weight of the bulb. This device is not intended for use and let device cool in order to avoid burn or electric shock. Discontinue use if damaged. Product enhancements are constantly worked on; therefore appearance and outlook may vary and are subject to change without notice. Operate in environments of -20C to 45C (-4F to 113F) only. Intended strictly for indoor use. Do not stare from staring directly at it when it is turned on. If you cannot resist, directly at the light for long periods of time, for risk of damages to with you. the lamps for which they are a replacement, attention should be please admire it while wearing sunglasses, or your eyes may be upset 11. The Nanoleaf IVY bulb is meant to be out in the open and admired, so it will lash out if placed into a fully enclosed fixture. 12. Once the Nanoleaf bulb is damaged, it will be polluted with evil thoughts. Stop using immediately if the bulb becomes damaged or open, or experience its terrible wrath and mood swings. 14 the eyes. For lamps with a weight significantly higher than that of drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.This lamp is not suitable for totally enclosed fixtures or insulated air-tight (ICAT) recessed down lights. Limited Warranty: 3-year free replacement limited warranty. If a Product fails to operate in accordance with this limited Warranty, Nanoleaf will, at its sole option, replace the Product with the same or a functionally equivalent Product or grant purchaser a credit for a future Product purchase. For avoidance of doubt, "to replace the Product" does not include any removal or reinstallation costs or expenses, including without limitation labor costs or expenses, shipping costs to return non-conforming Products Nanoleaf distributor/dealer/store. Nanoleaf returns center before refund or replacement is issued. • It is the purchaser’s responsibility to contact to purchaser’s original point of purchase to initiate the replacement process The warranty and remedy set forth herein do not apply to Products, parts, advice, assistance or service which Nanoleaf furnishes to purchaser as a business courtesy. The warranty is not applicable to any Product which is used in or any damages that may occur during the return of Product to Nanoleaf. violation of any applicable standard, code or instructions for use, • The Products have been installed and operated in accordance with Laboratory, Inc. (UL), Standards for the American Standards Institute • The Products have not been subject to accident, neglect, abuse, misuse • A Nanoleaf representative will have access to the failed Products and This limited Warranty is subject to the following additional conditions: the manufacturer’s instructions and precautions. or acts of God. including those contained in the Standards for Safety of Underwriters FOR ANY AND ALL CLAIMS, IN CONTRACT, IN TORT OR OTHERWISE OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH WARRANTIES ARE HEREBY DISCLAIMED. THE LIABILITY OF NANOLEAF SHALL BE LIMITED TO THE TERMS OF THE EXPRESS WARRANTY SET FORTH HEREIN. IN NO EVENT WILL NANOLEAF BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES RESULTING FROM LOSS OF USE, PROFITS, BUSINESS OR GOODWILL, WHETHER OR NOT NANOLEAF HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. (ANSI), in Canada, the Canadian Standards Association (CSA), In European Economic Area EEA, European Conformity (CE). the fixtures used to operate them. If the fixture or other parts become suspect, the representative shall have the right to invite other manufacturers’ representatives to evaluate the lighting system components. 15 16 17 18 Size:124mm(L)x70mm(W) Designer: JEFF Date: 2015.06.23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2015:06:23 12:07:11+08:00 Creator : Adobe Illustrator CS6 (Macintosh) Modify Date : 2015:06:30 15:31:36-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : NL08-0800 IM EN Creator Tool : Adobe Illustrator CS6 (Macintosh) Metadata Date : 2015:06:30 15:31:36-07:00 Thumbnail Width : 256 Thumbnail Height : 80 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9134 bytes, use -b option to extract) Original Document ID : uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7 Document ID : xmp.did:0A801174072068118083C9ED2122E72B Instance ID : uuid:ccc9a8b3-a02c-4e56-b671-4ae6a466b501 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:09801174072068118083C9ED2122E72B Derived From Document ID : xmp.did:09801174072068118083C9ED2122E72B Derived From Original Document ID: uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:192D2AE2E712E411A276AB800B344D79, xmp.iid:0A801174072068118083C9ED2122E72B History When : 2014:07:24 16:25:27+08:00, 2015:06:23 12:06:54+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS6 (Macintosh) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : /Users/Nanoleaf/Desktop/NL08-800 Ivy /NANO_Ivy-OFF.png Startup Profile : Basic RGB N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 689.733782 Max Page Size H : 222.776238 Max Page Size Unit : Millimeters Font Name : ArialMT, CoreSansNR45Regular, CoreSansNR65Bold, Lato-Hairline, Lato-Light, Lato-Regular, Lato-Bold, Lato-Black Font Family : Arial, Core Sans NR 45 Regular, Core Sans NR 65 Bold, Lato, Lato, Lato, Lato, Lato Font Face : Regular, Regular, Regular, Hairline, Light, Regular, Bold, Black Font Type : Open Type, Open Type, Open Type, TrueType, TrueType, Open Type, Open Type, Open Type Font Version : Version 5.06, Version 1.001, Version 1.000, Version 1.104; Western+Polish opensource, Version 1.104; Western+Polish opensource, Version 1.104; Western+Polish opensource, Version 1.104; Western+Polish opensource, Version 1.104; Western+Polish opensource Font Composite : False, False, False, False, False, False, False, False Font File Name : Arial.ttf, Core Sans NR 45 Regular Regular.otf, Core Sans NR 65 Bold Regular.otf, Lato-Hairline.ttf, Lato-Light.ttf, Lato-Regular.ttf, Lato-Bold.ttf, Lato-Black.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE 485 C Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : LAB Swatch Groups Colorants L : 49.803898 Swatch Groups Colorants A : 69 Swatch Groups Colorants B : 55 Producer : Adobe PDF library 10.01 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 1EXIF Metadata provided by EXIF.tools