NComputing X300 Multi-user Networking Card User Manual xtenda x300 manual

NComputing Co., Ltd. Multi-user Networking Card xtenda x300 manual

users manual

Download: NComputing X300 Multi-user Networking Card User Manual xtenda x300 manual
Mirror Download [FCC.gov]NComputing X300 Multi-user Networking Card User Manual xtenda x300 manual
Document ID616570
Application ID0GB1LMJyRjVDfCnm1EStBw==
Document Descriptionusers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize121.72kB (1521492 bits)
Date Submitted2006-01-03 00:00:00
Date Available2006-01-02 00:00:00
Creation Date2005-12-15 16:54:42
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2005-12-21 11:19:29
Document TitleMicrosoft Word - xtenda_x300_manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: thomas

User’s guide for XtendaTM
(X300 Series)
© Copyright by Ncomputing Co. Ltd. 2004 . - Illegal copying of this software, hardware and this
documentation is prohibited by law. All other brand- and product names are trademarks of
registered trademarks of the respective owners.
Safety Instructions
The following instructions pertain to the risk of fire, electric shock or bodily injury.
Please read all of these instructions carefully.
Warning
- Do not use this system on an unstable cart, stand or table.
The product may fall, causing serious damage to the product.
- Slots and openings in the cabinet and the back have been provided for
ventilation. To ensure reliable operation of your computer, and to protect it
from overheating, do not block or cover these openings.
- Never push objects of any kind into the system through the cabinet
openings. Objects may touch dangerous voltage points or short out parts that
could result in a fire or electrical shock. Never spill liquid of any kind on the
product.
- This computer should only be connected to the adapter comes with your
system. If you want to use other adapter, consult your dealer.
- Do not allow anything to rest on the power cord. Do not locate this product
where people will walk on the cord.
- Unplug your system form the main electrical power outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
- Do not use this system near water.
- Your adapter plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert or replace your obsolete outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the
purpose of the grounding-type plug.
- To avoid generating an electric shock, be sure to plug the power cord into
the system before plugging it into the wall socket.
- For protection of your system and other devices during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug the
computer and other devices form the wall outlet and disconnect the cable
form system. This will prevent damage to the system and other devices due
to lighting and power line surges.
FCC Information to Use
Note : This equipment has been tested and found to comply with the limit for a
Class B digital device, pursuant 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions. May cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. IF
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off nad on, the user is encourage
to try to correct the interference by one or the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experience radio TV technician for help
Change or modification not expressly approved by the party responsible for
Compliance could void the user’s authority to operate the equipment
For enhancing the performance and the reliability of our product, We recommend that a user use the FTP
or STP cable between X300 PCI Card and X300 Multi Box.
Introductions
What is XtendaTM ?
Xtenda X300 allows you to extend your computer for additional users without any
hassle. Instantly up to 7 users can use the computer simultaneously and independently.
NComputing’s patent-pending proprietary remote computing technologies including
SoC(System on Chip) based multi-user terminal processing, virtual termainal server
software and unique optimized protocol will scale efficiently your underutilized CPU
horsepower to share without sacrificing any speed.
Features of important chip
*** X300 PCI Card
CPLD Device : ALTERA Cyclone EP1C6Q240
PLD Device : ALTERA MAX EPM3128ATC100
SDRAM : SAMSUNG K4S043232H-TC60
*** X300 Multi Box
PLD Device : ALTERA MAX EPM3064ATC44
Features of I/O Ports
*** X300 PCI Card
Three PC(RJ-45) Port
*** X300 Multi Box
One PS/2 Type Keyboard
One PS/2 Type Mouse
One VGA Port
One PC(RJ-45) Port
One Speaker Jack
Overview
X300 PCI Card
Power LED
X300 Multi Box
X300 Multi Box
Connection Port
Speaker/Headphone Jack
PS/2 Keyboard Port
PS/2 Mouse Port
VGA Monitor Port
X300 PCI Card Connection Port
The X300 PCI Card ports are for connection with the X300 Multi Box only.
They are not LAN ports for generic Ethernet connections. Connecting generic LAN
devices may result in damage to the product .
※ The product may vary depending on your model type.
Installing the X300 PCI Card
Please follow the instructions below for installing the
X300 PCI Card in the Host PC:
1 Disconnect all peripheral and power cables from the Host PC.
2 Remove the system cover of the Host PC.
3 Find an available PCI slot for the installation of the X300 PCI Card.
Remove the slot cover.
4 Insert the X300 PCI Card and secure the end of the card to the chassis with
a retaining screw.
5 Replace the Host PC cover and reconnect all peripheral and power cables.
Connecting the X300 PCI Card to the X300 Multi Box
Please follow the instructions below for connecting
the X300 PCI Card to the X300 Multi Box:
Rear view
Use a LAN cable to connect
the X300 PCI Card to the
X300 Multi Box.
Use speakers with built-in amplifier only.
Connect a PS/2 type keyboard, mouse,
speakers & monitor to the X300 Multi Box
Recommended Specifications
Operating Systems supported by the X300 PCI Card are as follows:
- Windows® 2000 Professional
- Windows® XP Home Edition
- Windows® XP Professional
※ Changes may be made to the list of supported Operating Systems without prior notice.
Screen Resolutions Supported
- Screen Resolution : 800 × 600, 1024 × 768
- Color Depth : 256 Color, 16 bit
- Refresh Rate : 60 Hz
Maximum number of users per Host PC
A maximum of 2 X300 PCI Cards can be installed on a Host PC to support
6 X300 Multi Boxes. (Up to 3 X300 Multi Boxes can be connected to each X300 PCI Card.)
Recommended Specifications for Using the X300 PCI Card and the X300 Multi Box
Xtenda
1 X300 PCI Card (1~3 X300 Multi Box) 2 X300 PCI Card (4~6 X300 Multi Box)
CPU and Memory
on Host PC
1.3GHz~2.4GHz(P4/HT)
512MB or more
※ HT : Intel
2.4GHz~3.8GHz(P4/HT)
1GB or more
Hyper-Threading Technology
N O T E
▶ Always ensure that the Host PC has adequate processing power.
Check the CPU and Memory requirements listed on the table above when
adding users.
▶ Recommended specifications for connecting X300 Boxes may be changed
as enhancements are made to the functionality of the X300 PCI Card.
※ Actual minimum requirements may vary depending on the performance
and configuration of the Host PC.
Installing the XtendaTS Program
Verify that the X300 PCI Card is properly connected before
installing the Xtenda TS program.
Installing X300 PCI Card Driver
Verify that the LAN cable, PS/2 type keyboard/mouse, external monitor, and
speakers are connected to the X300 Multi Box before starting the computer.
Please note that the Xtenda X300 devices may not function properly if you start the
computer before the external devices are connected.
1 Start the computer. At the Windows initial
screen, select ‘Found New Hardware
Wizard’ and click the  button.
2 Insert the ‘Software Installation CD’ into the CD-ROM drive.
3 When prompted with the `Found New
Hardware Wizard' screen, select `Install
from a list orspecific location(Advanced)'
and click the  button.
4 Under ‘Search for the best driver in
these locations,' select ‘Include
this location in the search’ and
click the  button.
5 Select the ‘Drivers’ folder from ‘CD-ROM Drive.' Click the  button and then click
the  button.
6 Install the `X300 PCI Card' driver. When prompted with the `Hardware Installation' warning
screen, click the  button.
7 Click the  button to complete the
driver installation. After you press the
 button you will be required to
restart the system.
N O T E
Check under `Display Adapter' in the `Device Manager` located in the Control
Panel's `System Properties' to verify installation of the X300 PCI Card driver.
Installing the Xtenda TS Program
1 Insert the ‘Software Installation CD’ into the CD-ROM drive.
2 Double-click ‘Install Main Program.’
3 Click the  button illustrated by the
screen below.
N O T E
The following screen will be displayed
if the computer is not connected to the
Internet. Click the  button to proceed.
4 Read the ‘End-User License Agreement'
carefully. Select ‘I Agree’, and click the
 button.
5 Read the ‘Terms of Use' carefully.
Select ‘I Agree’, and click the  button.
10
6 At the screen illustrated below, read the
information and click the  button.
7 Confirm the installation location, and click
the  button.
8 When prompted for the administrator
password, read the ‘Information’ section,
and select the options to install. Click the
 button.
11
N O T E
● Administrator Password : This is the password that will enable access to the
Administration Console. It is important that you store this information in a
secure location.
● Network Control Console : A management utility for users and groups. The "Software Settings
(LAN)" item will be installed in the Xtenda TS console if this option is checked. This extra option
allows for the management of computers and Xtenda X300 devices that are currently connected.
9 At the user registration screen, enter the serial
number and activation key from the label on the
bottom of the X300 Multi Box, in addition to the
rest of the required information. Click the 
button.
10 When presented with the `Preparing to Copy Files' screen, click the  button.
12
11 If the screen is appeared, click  to
add a new user, or click .
(If you do not have any extra user accounts,
click the  button to add an account.)
12 Once the program installation is complete,
select the ‘Yes I want to restart my computer
now’ option and click the  button.
The system will recognize the Xtenda X300
product after the restart.
Part No. 160-0116 (Rev.B)
www.ncomputing.com
NComputing Co., Ltd. All rights reserved.
NComputing is a registered or pending trademark. Intel and Pentium are registered trademark
of Intel Corporation. Microsoft and Windows are registered trademark of Microsoft Corporation.
The information above may be changed without prior notice for performance improvements.
13

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:12:21 11:19:29+09:00
Create Date                     : 2005:12:15 16:54:42+09:00
Metadata Date                   : 2005:12:21 11:19:29+09:00
Format                          : application/pdf
Title                           : Microsoft Word - xtenda_x300_manual.doc
Creator                         : thomas
Document ID                     : uuid:9cc93c21-830e-4553-90da-0febc2945860
Instance ID                     : uuid:55cc0a5d-764b-485f-a64f-ca14fd4eafb0
Has XFA                         : No
Page Count                      : 17
Author                          : thomas
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SMJX300

Navigation menu