NEC Display Solutions of America TL620NS TRAVAN NS LOADER (SCSI DEVICE) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	21444
Application ID	ZEqjhvdqSs1IdaS6zyONKg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.1kB (463792 bits)
Date Submitted	1999-01-28 00:00:00
Date Available	1999-02-17 00:00:00
Creation Date	1999-01-28 11:29:09
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	1999-01-28 11:58:44
Document Title	Users Manual
Document Creator	Acrobat 3.0 Scan Plug-in

TL620NS TRAVAN—NS LOADER USER ‘S MANUAL
Now 12.98 R922
1 . The Compositionéee figured-12
Confirm the contents of the package.
1) TL620NS/A TRAVAN-NS LOADER UNIT 1 UNIT
2) MAGAZNE 2 Pieces
3) C L E A N l N G TAPE CARTRIDGE 1 Pieces
4) AC Cable 1 Pieces
2. The Name / Function
9 1 Emntififl m 2.1)
LOAD : TAPE which is inserted in the magazine by pushing this switch moves
to DRIVE. When more than one TAPE is inserted in the magazine,
TAPE with the earliest slot number is chosen and moves to DRIVE.
EJ'EC’I‘. MAGAZINE is discharged to the fiont by pushing this switch.
LED : MGZleight Up: When MAGAZINEI is inserted (Ready Condition)
Blinking: It inserts MAGAZINEI and it still is BUSY condition.
When execute Power-on Self- Test.
MGZZ-Light Up: When MAGAZINE2 is inserted (Ready Condition)
Blinking: It inserts MAGAZINE2 and it still is BUSY condition.
When execute Power-on Self- Test.
CLEAN : Blinking: When execute Power-on Self- Test.
Executing Head Cleaning.
ALARM :Light Up : FRONT DOOR Open(When Power-on)
Blinking: When execute Power-on Selfv Test.
FRONT DOOR: It is the door for the dust not to be able to go into the unit.
[NOTE] This door can not open when the unit is power-off and MAGAZINE
is inserted.
WM
POWER SWITCH : The main switch for running on the power supply to the
TL620NS.Ensure that the ALERM LED of the power supply
Is off before turning on the power.
[NOTE] There may be case when the power supply cannot be switched on depending on
the setting made for the power supply control board described .
IF CONNECTOR(J1,J2) : It is the connector to attach the interface cable of the unit.
[NOTE] The unit have two interface connectors (J 1,J2).For details, refer to " the
connection with the system ".
DRIVE ID : It is the SCSI ID switch of Tape-Drive which is stored into the units
LOADER ID 1 It is the SCSI ID on the Loader unit.
[NOTE] SCSI ID be careful so as not for the side of the Tape-Drive and the side of
Loader unit to overlap.
TERMINATION : When unit is connected with the termination set to “ON".
Also, when connecting from the unit to another SCSI UNIT, set
to “OFF”.
[NOTE] When making this switch “ON”, you don't connect Tbnnination Connector with
J 1 or J2.
AC INLET : This is the place to insert AC power cable. The AC power can be used at
the voltage 100V-240V,(auto-sense)
3. Connection of HOST Computer ------- ' ~ ' see figure 3-1
Using of TL6‘20NS TRA VAN-NS LOADER
41 If the connection with HOST completes, you turn on the Power-Switch in the
unit,
[NOTE] The attached power code is intended for a lOO-IZOVAC input power supply.
If the TL620NS is to be used with an input voltage of 200-240VAC,use
a power supply code set , Listed , 3-conductor , rated 250VAC /min.6A.
[NOTE] This unit executes a Self-Test after the turning on.
While executing a Self-Test, all LED are blinking. Also ,while executing a
Self-Test ,can not be executed everything.
The Self-Test ends within about 1 minute.
After Self-Test ending, all LED go out.
42 Method of TAPE CARTRIDGE and MAGAZINE
When you insert TAPE CARTRIDGE in TRAVAN-NS LOADER, go by the
procedure of the following (1)-(3)
. Insert of MAGAZINE
(1) It is TAPE CARTRIDGE in MAGAZINE.(see figure 4-1)This MAGAZINE can
insert TAPE in a maximum of 3 at one. If using 2 MAGAZINEMAGAZINEv
l/MAGAZINE-Z) ,a maximum of6 TAPE CARTRIDGE can be used.
(2) When you insert MAGAZINE-1, that it is possible to do the wait which bumps
against the direction of the arrow fiom the FRONT DOOR At this time, If LED
of "MGZl" lights up, MAGAZINE-1 is automatically dragged into the inside of
the unit from the position,(see figure 4-2)
(3) When MAGAZINE-l is inserted in the unit, the unit executes the confirmation
operation the place where in TAPE CARTRIDGE is inserted in.(Read Element
Check)
(4) The operation of MAGAZINE-1 becomes able to be inserted the following
MAGAZINE —2 for the first time after ending.
(5) Insert MAGAZINE-2 in the same way.
0 Insert of MAGAZINE
MAGAZINE is discharged to the front by pushing this switch.(see figure4-3)
MAGAZINE is discharged by the order of MAGAZINE-2, MAGAZINE-1.
[NOTE]Only one MAGAZINE is practicable.
If TAPE CARTRIDE isn't inserted in MAGAZINE, the MAGAZINE can
not be inserted in UNIT
Specifivations ofTLé'ZONS TRAVAJV-NS LOADER
5.1 Capacity
TLGZONS 60GByte (lZOGByte: Enable compression)
-At Media 10GBye ( 20GByte : Enable compression)
52 Data Transfer Rate
SCSI Transfer : lOMbyte/sec max( Fast SCSI-2 )
Execute Transfer : leytelsec Typ
5.3 Environmental
Temperature operating 565°C
Storage -30-40°C
Transport -10-50°C
Humidity operating 20-80% (max wet bulb temperature=26°C)
Store 10-90% (max wet bulb temperature=26°C)
Transport 10-90% (max wet bulb temperature=26°C)
54 Power Requirements
AC Line Specifications : 100-240V (Auto sense enable)
Frequency : 50/60Hz
Wattage operation : 28W
Non-operation : 16w
5.5 Dimensions and weight
The overall dimensions of drive are as follws:
Height: 150mm
Depth: 350mm
Width: 170mm
Weight less than 6A5kg
AC Cable
TLSZONA/A TRAVAN-NS LOADER UNIT
Te rn i net i on
Q Connector
IF Cable
TAPE CARTRIDGE
(6 Pieces)
MAGAZINE
(2 Pieces )
Figure lvl
LOAD
EJECT
Low sun
l—Hfl-Hi -.
O D O O O 0 O
ogogooooooogog08ogooogogogogogogogogogo
0000050888000000O 00 0° 00000 0 0000000 0 0 000
°°°oo oo°ooooo°o°ooo°oggo
ooo 00000000000 00 oooooc,
E FRONT
DOOR
Figure 2-1
IF Cable from SYSTEM ' l
],AC Cable
Figure 3-1
IF Cable
TRAVAN-NS LOADER UNIT SYSTE“(59"'°’)
FCC Warning
Class B Computing Device
Information to the User
This equipment has been tested and found tooomply with the limits foradas
Bdlgjtal devicepursuanttopart ISofI‘OCRula. Thmellmitaaredesigmed to
provide reachable protection against harmful interference in a residential instal-
lation. This equipment generam, uses, and can radiate radio frequency energy
and, if not imtaued and used in accordance with the instructions, may muse
harmfillinterterencetomdiocommunieafiom However,tlnreianogumanxee
thatlnterferencewill notoccurinaparfiadarinstallafloulfthixequipment
dos causeinterferencemmdicortelevisionreoepfiomwhiehmnbedetermined
by turning theequipment ofiand on. the useris encouraged to try to eon-eat the
interference by one or more orthe following measures:
Real-tent or relomte the receiving antenna.
-lnerease the separation between the equipment and receiver.
Connect the equipment into an outlet on a eircuit different from that to
which the receiver is connected
-Comult the dealer or an experienced radio/[V technician for help and for
additional suggestions.
mmmayflmi theiollowingbookletprepared bytheFedeialCommuniea-
dons Commission helpful: "How to Idmfit'y and Raolve Mo-TV imerfiereme
Problem" This booklet is available from the US Government Printing Office,
Washington, D.C. 2040), Stock No. 004—000—003454.
FCC Warning
The meris condoned that changes or modifications not expressly approved by
the manufacturer could void the reefs authority to operate the equipmmt.
NOTE: In order for an installation of this product to maintain compliance with
thelimits forafldeMmMedeabl-ammtbemd.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1999:01:28 11:58:44
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 1999:01:28 11:29:09
Page Count                      : 12

EXIF Metadata provided by EXIF.tools