NEC of America 8WV WLAN Phone User Manual 2

NEC Corporation of America WLAN Phone Users Manual 2

1. Users Manual 1
2. Users Manual 2

Users Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	915679
Application ID	xRiQpZRi5O7KwqIuOO8lNg==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	333.41kB (4167659 bits)
Date Submitted	2008-03-17 00:00:00
Date Available	2008-03-17 00:00:00
Creation Date	2008-01-31 17:26:19
Producing Software	ã‚¯ã‚»ãƒPDF2 v2.10
Document Lastmod	2008-01-31 17:41:53
Document Title	Users Manual 2
Document Creator	Xelo PDFLibrary

en
tia
nf
id
MH240 Wireless IP Telephone
Co
USER’S GUIDE
NE
In
fro
nt
ia
Please often read this manual, and handle it correctly
ahead of the use.
Moreover, please keep it importantly so that it is
shown at once when it is necessary after you read.
A50-012054-001
Preliminary Issue, January 2008
NE
In
fro
ia
nt
en
tia
id
nf
Co
l
en
tia
LIABILITY DISCLAIMER
Co
nf
id
NEC Infrontia Corporation reserves the right to change the specifications,
functions, or features, at any time, without notice.
NEC Infrontia Corporation has prepared this document for use by its
employees and customers. The information contained herein is the property
of NEC Infrontia Corporation and shall not be reproduced without prior
written approval from NEC Infrontia Corporation. All brand names and
product names on this document are trademarks or registered trademarks of
their respective companies.
Copyright 2008
NE
In
fro
nt
ia
NEC Infrontia Corporation
NE
In
fro
ia
nt
en
tia
id
nf
Co
User Safety Protocol
--------------------------------------------------------------------------Important: Read this information before using your MH240 Phone.
Observe the following instructions to use this product safely, prevent you and other people from
possible injury, and protect properties. Improper handling may cause heat, explosion, and fire.
en
tia
Danger
Recharge the battery with the matching battery charger (see battery label description).
Use the battery only for this MH240 phone system. Do not use it with other electrical devices.
Keep the following warnings to prevent the battery pack from heating, explosion, and fire.
id
Do not throw the battery pack into fire.
nf
Do not solder the battery pack directly.
Do not short the positive (+) and negative (-) terminal of the battery pack with metal.
Co
Do not poke the battery nor smash it with hammer.
Do not disassemble nor modify the battery pack. It has a safety circuit and a damaged circuit may
cause heat, explosion, and fire.
ia
The internal liquid of the battery pack has strong acid. If the battery liquid gets into your eye,
rinse your eye well with water and consult with a doctor.
NE
In
fro
nt
Do not use, leave, nor recharge the battery pack near fire or under the direct sunlight. High
temperature may damage the internal safety circuit and may cause malfunction of the recharge,
heat, explosion, or fire.
Warning
Do not use the unit when you notice smoke, strange smell or other unusual happenings. It may
cause fire if you continuously use them. Turn off the power switch of the phone system
immediately. For the recharger, disconnect the power plug immediately. Confirm that smoke is
ceased, and then contact the nearest NEC service office. Never attempt to repair those units by
yourself.
en
tia
If you had an accident such as dropping the phone and broke the unit, turn off the power of the
phone system immediately. For the recharger, disconnect the power plug immediately. Contact
the nearest NEC service office. If you keep using those units, they may cause fire or electrical
shock.
id
If water smeared into the unit, turn off the power of the phone system immediately. For the
recharger, disconnect the power plug immediately. Contact with the nearest NEC service office.
If you keep using those units, they may cause fire or electrical shock.
nf
Do not insert flammable or metal objects into the units. If a foreign object were accidentally
placed into the units, turn off the power of the phone system and plug out the power adapter.
Contact the nearest NEC service office. If you keep using those units, they may cause fire or
electrical shock. Pay special attention to children to prevent from similar accidents.
Co
Do not attempt to disassemble nor modify the units. It may cause fire, electrical shock, or system
malfunction. Modification by a user is prohibited by law.
Do not open the units intentionally. It may cause electrical shock or system malfunction. Ask test
adjustment, and repair of the units for the nearest NEC service office.
ia
Do not twist, put a heavy object, and push the phone system. Such actions may cause damage, fire,
or injuries.
fro
nt
Do not place a container with water such as a vase, a plant pot, a cup, cosmetics, chemicals, nor a
small metal object. Splashing water over the units and foreign metal object inserted into the units
may cause fire or electrical shock.
Do not use the unit in a high humid area such as a bathroom or near a humidifier. They may cause
fire, electrical shock, or system malfunction.
In
Use the specified power adapter, which is attached to the unit. Other adapters may cause fire or
system malfunction.
NE
Do not damage, or modify the power adapter cord. Do not kink, pull, twist, or bundle it. Do not
put a heavy objector heat it. They may cause fire, electrical shock, or system malfunction. Contact
the nearest NEC service office for a damaged adapter cord.
Do not touch the power plug with a wet hand. It may cause electrical shock or system
malfunction.
Do not touch the units or replace a battery with a wet hand. It may cause electrical shock or
system malfunction.
When you hear thunder during using the phone system outside, immediately stop using it and
move to a safe place.
Do not use multiple plugs to a single outlet. It may cause fire or electrical shock.
Follow the instruction below when you use a battery pack. They may cause heating, explosion,
and fire;
Do not put the battery pack into a microwave oven or a pressure chamber.
Do not use other batteries with this battery pack.
en
tia
If the internal battery liquid clung to your skin or clothes, immediately rinse it with clean water to
prevent chemical damage to your skin and clothes.
Do not use the phone or recharge the battery in a place where fire or explosion may occur.
This phone system does not have explosion protection. Do not use it where a flammable gas
such as propane and gasoline are stored. Turn off the power of the phone immediately. Do
not recharge the battery in such a place.
NE
In
fro
nt
ia
Co
nf
id
Do not use near microwave ovens, medical equipment and industrial equipment.
NE
In
fro
nt
ia
Co
nf
id
en
tia
This page is for your notes.
FCC portion
---------------------------------------------------------------------------
en
tia
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
id
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
nf
Consult the dealer or an experienced radio/TV technician for help.
Co
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
ia
Caution:
nt
Any changes or modifications not expressly approved by the party responsible for product compliance
could void the user's authority to operate the equipment.
NE
In
fro
To comply with FCC RF exposure compliance requirements, this device must not be co-located or
operating in conjunction with any other antenna or transmitter.
Industry Canada Portion
--------------------------------------------------------------------------Canada Regulatory Compliance Statement
en
tia
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada.
For Customers in Canada
this device may not cause interference, and
id
This device complies with RSS 210 of Industry Canada (IC).
Operation is subject to the following two conditions:
nf
this device must accept any interference, including interference that may cause undesired
operation of this device.
Co
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes:
il ne doit pas produire de brouillage et
ia
l’ utilisateur du dispositif doit étre prêt a accepter tout brouillage radioélectrique reçu, même
si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
nt
Exposure to radio frequency radiation
NE
In
fro
The installer of this radio equipment must ensure that the antenna is located or pointed such that it
does not emit RF field in excess of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada’s website at www.hc-sc.gc.ca/rpb.
TABLE OF CONTENTS
1.INTRODUCTION
en
tia
• WAT IS MH240?........................................................................................ 1
• KEYS AND PARTS ................................................................................... 2
• ICONS ......................................................................................................... 3
• STANDBY MODE...................................................................................... 4
• MAIN MENU ............................................................................................... 4
2.GETTING SRTARTED
nf
id
• HOW TO INSERT THE BATTERY.......................................................... 5
• HOW TO REPLACE THE BATTERY ..................................................... 5
• HOW TO CHARGE THE BATTERY ....................................................... 6
3.BASIC OPARATION
fro
nt
ia
Co
• TO POWER ON THE PHONE (STANDBY MODE) .............................. 9
• TO POWER OFF THE PHONE................................................................ 9
• TO ANSWER A CALL ............................................................................ 10
• TO MAKE A CALL .................................................................................. 10
• TO PLACE A CALL ON HOLD ............................................................. 10
• TO TRANSFER A CALL ........................................................................ 10
• TO REDIAL (LAST NUMBER REDIAL)............................................... 11
• TO USE MUTE MODE ............................................................................ 11
• TO USE HEADSET ................................................................................. 12
• TO USE SOFT KEYS.............................................................................. 12
4.FEATURES
NE
In
• TO USE CONFERENCE (3-WAY CALL) ............................................. 13
• TO USE SPEAKER MONITOR.............................................................. 13
• TO ADJUST CALL VOLUME ................................................................ 13
• TO USE COURTESY MODE ................................................................. 14
• TO USE HANDY KEYLOCK .................................................................. 14
• TO USE SHORTCUT ICON ................................................................... 14
• TO RECONNECT TO NETWORK......................................................... 14
5.CALL HISTORY
• TO VIEW CALL HISTORY ..................................................................... 15
• TO MAKE A CALL FROM CALL HISTORY........................................ 16
• TO ADD PHONE NUMBER TO DIRECTORY ..................................... 16
• TO DELETE A CALL HISTORY............................................................ 19
TABLE OF CONTENTS
• TO DELETE ALL CALL HISTORIES ................................................... 19
6.DIRECTRY
id
en
tia
• TO VIEW DIRECTORY ........................................................................... 21
• TO SEARCH DIRECTORY .................................................................... 21
• TO SETUP GROUP................................................................................. 24
• TO ADD A NEW ENTRY ........................................................................ 25
• TO DELETE A RECORD........................................................................ 27
• TO DELETE ALL RECORDS ................................................................ 27
• TO MAKE A CALL FROM DIRECTORY.............................................. 27
• TO EDIT AN ENTRY ............................................................................... 28
• TO CONFIRM YOUR PHONE NUMBER ............................................. 28
nf
7.SPEED DIAL/PRESET DIAL
ia
Co
• TO USE SPEED DIAL ............................................................................ 29
• TO ENABLE SPEED DIAL .................................................................... 29
• TO USE PRESET DIAL .......................................................................... 30
• TO ENABLE PRESET DIAL .................................................................. 30
• TO ADD NEW ENTRY/EDIT .................................................................. 30
8.SETTING
NE
In
fro
nt
• RING VOLUME ........................................................................................ 31
• RING TONE.............................................................................................. 31
• INCOMING POPUP................................................................................. 32
• ILLUMINATION ....................................................................................... 32
• PRIVATE CALL ....................................................................................... 33
• VIBRATOR ............................................................................................... 33
• INCOMING MODE................................................................................... 34
• HEADSET................................................................................................. 34
• OFFHOKK RING ..................................................................................... 35
• RTP ALARM ............................................................................................ 36
• HOLD MUSIC........................................................................................... 36
• CALL VOLUME ....................................................................................... 37
• HANDOVER TONE ................................................................................. 37
• TALK START VIBRATOR...................................................................... 38
• LCD CONTRAST..................................................................................... 38
• BACK LIGHT ........................................................................................... 39
• FONT SIZE ............................................................................................... 39
• LANGUAGE ............................................................................................. 40
• MY NAME ................................................................................................. 40
ii
TABLE OF CONTENTS
id
en
tia
• DISPLAY PATTERN ............................................................................... 41
• CHANGE PASSWORD........................................................................... 41
• KEY TOUCH TONE................................................................................. 42
• SPEAKER MONITOR ............................................................................. 42
• DATE......................................................................................................... 43
• TIME .......................................................................................................... 43
• TIME FORMAT ........................................................................................ 44
• DATLIGHT SAVING................................................................................ 44
• NTP SETTING.......................................................................................... 45
• NTP SERVER........................................................................................... 45
• TIME ZONE .............................................................................................. 46
9.INFORMATION
Co
nf
• TO DISPLAY STATUS ........................................................................... 47
• TO DISPLAY WIRELESS STATUS ...................................................... 47
• TO DISPLAY SIP STATUS .................................................................... 48
10.PASSWORD LOCK
fro
11.PREFIX DIAL
nt
ia
• TO USE MANUAL LOCK ....................................................................... 49
• TO UNLOCK YOUR PHONE ................................................................. 49
• TO ENBLE MANUAL LOCK.................................................................. 49
• TO USE OUTSIDE LOCK ...................................................................... 50
• TO USE POWEROFF LOCK ................................................................. 50
• TO USE PREFIX DIAL............................................................................ 51
• TO REGISTER PREFIX NO. .................................................................. 52
In
12.FAVORITES
NE
• TO USE FAVORITES.............................................................................. 53
• TO ENTRY A MENU TO FAVORITES ................................................. 53
• TO DELETE A MENU FROM FAVORITES ......................................... 53
13.MENU LIST
• MENU LIST .............................................................................................. 55
• CHARACTER CODE LIST ..................................................................... 62
14.TROUBLE SHOOTING
• MESSAGE MEANINGS AND SUGGESTIONS................................... 63
iii
TABLE OF CONTENTS
• TROUBLES AND SUGGESTIONS ....................................................... 64
15.SPECIFICATIONS
en
tia
• TECHNICAL SPECIFICATIONS ........................................................... 65
NE
In
fro
nt
ia
Co
nf
id
16.LICENCE
iv
1.INTRODUCTION
• WAT IS MH240?
PCS/PHS equivalent features are available
by connecting with NEC PABX such as
SV8100, SV8300 or UX5000, and WLAN
system.
MH240 dedicated features are also
available such as Call History, Directory,
Password Lock, Favorites, Speed Dial,
Speaker monitor and Courtesy Mode.
NE
In
fro
nt
ia
Co
nf
id
en
tia
MH240 is a wireless VoIP phone that complies
with IEEE 802.11b/g specifications. MH240 has
the following features:
MH240
• KEYS AND PARTS
The phone has the following keys and parts.
(5)Soft Keys
(6)Multi Function Keys
Delete
Save
Back
(8)UP Key
(7)OK Key
(12)TRANSFER Key
(13)HOLD/
CLEAR Key
(11)RIGHT Key
(15)MENU Key
(9)DOWN Key
(10)LEFT Key
(14)CONFERENCE Key
(2)
(3)
Ear Speaker
USB Connector
(4)
Display
(5)
Soft Keys
(6)
Multi Function Keys
(7)
(8)
(9)
(10)
(11)
(12)
OK Key
UP Key
DOWN Key
LEFT Key
RIGHT Key
TRANSFER Key
nf
(17)POWER/
ON HOOK Key
(16)OFF HOOK Key
PARTS
Info LED
(19)Dial Pad
Transfer the ongoing call
or select Left soft key
HOLD/CLEAR Key Place the ongoing call in
hold, return to the
previous screen, delete
input character/digit or
select Right soft key
CONFERENCE Key Enter the conference
mode (3-way call)
MENU Key
Display Menu screen
OFF HOOK Key
Terminate an active call,
POWER/ON HOOK Terminate an active call,
Key
power on/off the phone or
exit a menu without
making changes
Headset Connector
Connect headset had
JEITA RC-5240 plug or
conversion cable
Dial Pad
Input dial number or
characters
Microphone
Strap Hole
Attach hand strap
Speaker
Ring when receiving a
call or listen to voice
when speaker monitor
Battery Cover
Co
(13)
(18)Headset Connector
(20)Microphone
(14)
ia
(21)Strap Hole
nt
(15)
(16)
(17)
fro
(22)Speaker
(18)
In
(19)
NE
(23)Battery Cover
(20)
(21)
(22)
(23)
REMARK
Display charging status
and receiving a call
Charge the power via AC
adapter
Monochrome LCD, 120×
90 pixels
Display soft keys depend
on the phone status
Assign various function
by System
Select Middle soft key
Select a value from the
list and move the cursor
in edit mode
(4)Display
No.
(1)
en
tia
(2)Ear Speaker
id
(1)Info LED
(3)USB Connector
• ICONS
The phone has the following icons.
Large
Small
): indicates battery charge
Antenna icon (
): indicates the radio
signal strength by your phone.
VM icon (
mail(s).
Courtesy icon ( ): indicates your phone
is to courtesy mode
Lock icon (
locked.
): indicates your phone is
RTP icon (
encrypted.
): indicates your call is
nt
fro
Out of service area
NE
In
Volume icon (
): indicates the ring
volume when Standby mode.
Ring Volume
Large
Middle
Small
Graduate
Off
): indicates you have voice
Cursor icon ( ): indicates active direction
keys (UP, DOWN, LEFT or RIGHT)
depend on the phone status.
Line icon (
Weak
): indicates your
ia
Radio Signal Strength
Strong
Icon
Co
Under charge
Missed call icon (
missed call(s).
Empty
Icon
Battery Charge Level
Full
en
tia
Middle
id
Icon
Call Volume
nf
Power icon (
level.
): indicates call volume in
Icon
1/ 1 Tue 0:00AM
240
Volume icon (
taking.
): indicates line key status.
Vibrator icon (
vibrator mode.
): indicates your phone is
• STANDBY MODE
Your phone starts up in this mode after being
powered on. Your phone displays the first screen
similar to the following.
en
tia
1/ 1 Tue 12:00AM
240
id
• MAIN MENU
nf
Press
key when the pone is in Standby
mode. The following main menu will be
displayed.
Menu
ia
nt
The menu list attached in the end
of this guide shows all available
items with the default value.
See “13.MENU LIST” for more
information.
NE
In
fro
TIP
Co
0.infomation
1.Call History
2.Directory
3.Tool
4.Voice Mail
2.GETTING SRTARTED
• HOW TO REPLACE THE
BATTERY
Insert the battery into the unit as follows.
Replace the battery of the phone as follows.
(1) Remove the battery cover from the phone.
(1) Power off the phone by pressing and holding
key for 2 seconds or more.
en
tia
• HOW TO INSERT THE
BATTERY
(2) Remove the battery cover from the phone.
(3) Remove the Battery.
id
(4) Insert the new battery into the unit so that the
label may face toward you.
nf
(5) Attach the battery cover again.
fro
nt
ia
Co
(2) Place the battery into the unit so that the
label may face toward you.
NE
In
(3) Attach the battery cover again.
(4) The LED on the cradle lights red, indicating
the battery is being charged. In this case, the
phone battery is not being charged and Info
LED turns off.
• HOW TO CHARGE THE
BATTERY
Be sure to charge the battery when using the
phone for the first time. Use one of the
following:
Cradle
AC Adapter (direct connection)
(6) Info LED lights green when the phone
battery is fully charged.
The phone can be charged by using the cradle.
You can also charge the battery by inserting the
battery pack alone to the slot on the cradle. This
is useful when you have a spare battery.
TIP
An empty battery pack can be fully
charged in about 4 hours.
TIP
If any abnormality is found to the
battery, the LED on the cradle
starts flashing. In this case, please
contact
your
network
administrator.
nf
(1) Insert the AC adapter plug (miniUSB) into
the USB connector in the back of the cradle.
(2) Plug in the AC adapter to an appropriate AC
outlet.
TIP
ia
Indicate charge status
nt
LED
Indicate charge status
AC outlet
fro
In
AC Adapter
NE
AC adapter plug
Cradle (Battery Charger)
In case that you place the phone
on the cradle and insert the spare
battery into the slot at the same
time, the spare battery will be
charged first.
Co
(3) Place the phone and/or the spare battery
pack as shown below. When placing a
battery pack into the slot, insert it so that the
label may face downward.
USB connector
id
By using the Cradle:
Info LED
en
tia
(5) The LED on the cradle lights green when the
spare battery is fully charged. After this,
charging to the phone battery will start and
Info LED lights red.
Spare Battery (option)
Note: Face the label of the battery pack
downward when inserting the battery
pack.
By using the AC Adapter:
To charge the phone using the AC adapter do as
follows.
(1) Insert the AC adapter to an appropriate AC
outlet.
en
tia
(2) Insert the AC adapter plug (miniUSB) to
USB connector of the phone.
Info LED
: Light red (Charging)
id
: Light green (Charging is completed)
USB connector
nf
AC adapter plug
Co
AC Adapter
NE
In
fro
nt
ia
AC outlet
NE
In
fro
nt
ia
Co
nf
id
en
tia
This page is for your notes.
3.BASIC OPARATION
Press and hold
key for 2 seconds or
more. The start screen appears and Info
LED flashes orange. After that your phone
displays the following initial screen.
• TO POWER OFF THE PHONE
Press and hold
key for 2 seconds or
more. “Power Off” is displayed and Info
LED flashes orange.
en
tia
• TO POWER ON THE PHONE
(STANDBY MODE)
A day of the week
My name
Co
9/ 2 Tue 08:27AM
223
Mike
Standby mode
Make sure Antenna icon (
on your phone as follow.
) is displayed
fro
This initial screen is called
Standby mode in this manual.
nt
TIP
ia
Phone Number
In
Antenna icon
NE
9/ 2 Tue 08:27AM
223
Mike
TIP
id
Current Time
nf
Current Date
Antenna icon indicates you can
use the phone. If Antenna icon
indicates out of service area ( ),
please contact your network
administrator.
• TO ANSWER A CALL
• TO PLACE A CALL ON HOLD
When receiving an incoming call, the display
automatically changes to Incoming Call screen.
During an active call, you can hold the call.
Press
displays.
en
tia
9/ 2 Tue 08:30AM
RING
240
key to hold the line. Your phone
HOLD
To answer the call, press
key
To stop the ring without answering the call,
press
key
Press
TIP
key again to retrieve the line.
During hold,
orange.
Info
LED
blinks
nf
When the calling party has been
TIP
already registered in the Directory,
the registered Name is displayed.
240
id
00:00:29
Co
• TO TRANSFER A CALL
During an active call, you can transfer the call to
other phone.
• TO MAKE A CALL
To make a phone call, do either of the following;
Enter the phone number and then press
key. (Preset Dialing)
Press
key and then enter the phone
number. (Overlap Dialing)
Press
displays.
key during the call. Your phone
By pressing CLEAR key, you can
delete the last digit of the dialed
number that is currently displayed
on the phone when Preset Dialing
is used.
In
fro
TIP
nt
ia
HOLD
00:00:29
240
After hearing Special Dial Tone, enter the
phone number to transfer the call.
The called party answers the call, and then
press
key or
key. (Attended
Transfer)
NE
or
10
Press
key or
key before the
called party answers. (Unattended Transfer)
• TO REDIAL (LAST NUMBER
REDIAL)
• TO USE MUTE MODE
During an active call, you can use Mute mode.
When enter Mute mode, your voice do not reach
to a called party.
You can make a call from the Call History of
Outgoing calls. A maximum of the 50 calls can
be automatically recorded.
Press
key in Standby mode. The
headset displays Call History of Outgoing
calls similar to the following.
Press
key to enter Mute mode. Your
phone displays.
en
tia
[M U T E]
00:00:50
Outgoing
Press
key to select a desired party you
want to redial.
9/ 2 8:30 240
9/ 1 22:11 Eric
9/ 1 14:56 John
8/31 9:42 Pat
Delete
Save
nt
Back
ia
Outgoing
Press
key. your phone displays the
phone number list as follow if the selected
party has been already registered in the
Directory.
fro
Number
In
1.14581234567
2.12621234567
3.200
Call
NE
Prefix
Press
Back
Press
key or “Call” soft key to redial
the party after you select a phone number
by pressing
key.
11
240
key again to exit Mute mode.
nf
Co
Back
id
TALKING
9/ 2 8:30 240
9/ 1 22:11 Eric
9/ 1 14:56 John
8/31 9:42 Pat
Delete
Save
• TO USE HEADSET
Connect a headset to the phone.
When the phone receives a call, you can
hear ringing from the headset or speaker
(configurable). If a vibrator is set to enable,
it is also available.
Press
You can talk using the microphone and ear
phone of the headset.
Press
key to answer the call.
key to end the call.
nf
id
This phone has a JEAITA RC-5240
jack as a headset connector. If
your headset has ∅ 2.5 plug, you
can connect the headset to the
phone by using a conversion
cable.
Co
TIP
en
tia
When a headset is inserted to the Headset
connector, the phone is in headset call mode.
• TO USE SOFT KEYS
ia
You will often use soft keys when you operate
this phone. You can use soft keys as follow.
fro
9/ 1 22:00 Eric
9/ 1 9:25 222
8/31 10:12 Tom
8/31 10:03 Tom
Delete
Save
nt
Incoming
NE
In
Back
12
4.FEATURES
This section explains how to use features on
your phone.
• TO ADJUST CALL VOLUME
During an active call, press
hold the line.
During a call:
After hearing Special Dial Tone, enter the
phone number that you want to have a party
join the call.
The called party answers the call, and then
press
key. Your phone displays.
en
tia
You can establish a Conference call (3-way call).
You can increase or decrease the receiver
volume in Standby mode or during a call. The
volume can be set in 3 steps (From Level 1
[Small] to Level 3 [Large]).The factory default
value is Level 2 [Middle].
• TO USE CONFERENCE
(3-WAY CALL)
key to
id
Press
key to select an appropriate volume
and then press “OK” soft key or wait timeout
while talking with your phone.
nf
Call Volume
• TO USE SPEAKER MONITOR
fro
During an active call, you can use Speaker
monitor. When enter Speaker monitor mode, you
can hear called party’s voice from a Speaker of
your phone.
Press and hold
key for 2 seconds or
more to enter Speaker monitor mode.
Press and hold
key again for 2
seconds or more to exit Speaker monitor
mode.
NE
In
OK
Back
In Standby mode:
ia
240
nt
CONF
00:00:35
Co
Large
Press
key in Standby mode. Your
phone displays the main menu.
Press
then press
Press
key to select “1.Usersetting” and
then press
key.
Press
press
Press
key to select “3.Call Volume”
and then press
key.
Press
key to select an appropriate
volume and then press “OK” soft key.
TIP
Note: To use Speaker monitor, you need to
enable this feature. See “8.SETTINGS”
for more information.
key to select “5.Setting” and
key.
key to select “2.Talk” and then
key.
You can reach Call Volume menu
by pressing following keys.
Go to Call Volume menu:
13
• TO USE COURTESY MODE
• TO RECONNECT TO
NETWORK
You can set your phone in Courtesy Mode.
When your phone is placed in this mode, your
phone displays Courtesy icon ( ).
Press and hold
key again for 1
second or more to exit Courtesy Mode.
TIP
When your phone enters Courtesy
Mode, a vibrator works instead of
speaker ringing.
id
• TO USE HANDY KEYLOCK
Press and hold
key for 2 seconds or
more to enter Handy KeyLock Mode.
Press and hold
key again for 2
seconds or more to exit Handy KeyLock
Mode.
Even if your phone enters Handy
KeyLock Mode, you can answer an
incoming call.
nt
TIP
ia
Co
nf
You can set your phone in Handy KeyLock
Mode. When your phone is placed in this mode,
you can not operate any key and your phone
displays “Handy KeyLock”.
fro
• TO USE SHORTCUT ICON
You can use shortcut icon when you have missed
calls and voice mails.
Press
key to display shortcut icon.
NE
In
( 5)
Press and hold
more to reconnect.
Press
press
( 2)
key for 3 second or
Press and hold
key for 1 second or
more to enter Courtesy Mode.
en
tia
You can reconnect to your network.
( 0)
key to select an icon and then
key.
14
5.CALL HISTORY
Your phone can record recent Call History in the
following 3 lists up to 50 records for each list.
You can open each list from the main menu or
by pressing the associated key in Standby mode.
key)
Incoming Calls (Press
key twice)
Missed Calls (Press
key twice)
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “1.Call History” and
then press
key. Your phone displays as
follow.
en
tia
Outgoing Calls (Press
• TO VIEW CALL HISTORY
Call History
1.Missed
2.Outgoing
3.Incoming
4.All Delete
nf
Once you see a list of Missed Calls
and close the screen, the records
are cleared automatically. You can
find those records from the list of
Incoming Calls.
Co
TIP
id
Outgoing Calls show a list of Dialed Numbers
and Incoming Calls show that of Received Calls.
You can make a call from the list and also add a
Call History to Directory as required.
Press
key to select a history you want
to view on the list and then press
key.
Your phone displays as follow when you
select “3.Incoming”.
NE
In
fro
nt
ia
Incoming
9/ 1 22:00 Eric
9/ 1 9:25 222
8/31 10:12 Tom
8/31 10:03 Tom
Delete
Save
Back
TIP
You can find missed call easily
from the list of Incoming Calls by
missed call icon (
).
TIP
You can reach each Call History by
pressing following keys.
View Missed Calls:
View Outgoing Calls:
View Incoming Calls:
15
• TO ADD PHONE NUMBER TO
DIRECTORY
Press
key in Standby mode. Your
phone displays the main menu.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “1.Call History” and
then press
key.
Press
key to select “1.Call History” and
then press
key.
Press
key to select a history you want
to view on the list and then press
key.
Press
key to select a history you want
to view on the list and then press
key.
Press
key to select a desired party you
want to make a call.
Press
key to select a phone number
you want to add to Directory.
en
tia
• TO MAKE A CALL FROM CALL
HISTORY
Incoming
Incoming
Back
Call
Back
fro
Prefix
nt
1.14581238901
2.12621238901
3.250
ia
Number
Press “Save” soft key.
Press
key or “Call” soft key to make
the call after you select a phone number by
pressing key.
1.New
2.Add
OK
Back
In case of New:
Press
key to select “1.New” and then
press “OK” soft key.
Edit
In
Back
Co
Press
key. Your phone displays the
phone number list as follow if the selected
party has been already registered in the
Directory.
nf
8/31 10:03 Tom
Delete
Save
9/ 1 22:00 Eric
9/ 1 9:25 222
8/31 10:12 Tom
8/31 10:03 Tom
Delete
Save
id
9/ 1 22:00 Eric
9/ 1 9:25 222
8/31 10:12 Tom
NE
Name
Group
222
Tel #2
Save
16
Edit
Back
-
Press
key to select an item you want to
edit and then press “Edit” soft key as
required. In this example, Name and Group
will be edited.
Edit the data in edit display.
Press “Save” soft key to save the data to
Directory. The display returns to the
previous one.
TIP
Name information is minimum
requirement to save the data.
en
tia
Name
In case of Add:
Press
key to select “2.Add” and then
press “OK” soft key.
Press
key to select a search way you
want. (In this case, to search by Name.)
Ken
ab
Clear
Search
Press “OK” soft key and then the display
returns to the previous one.
id
OK
1.Group
2.Name
3.Tel Number
4.Others
Co
Ken
Group
222
Tel #2
Save
nf
Edit
Edit
Back
Press
key to select “Group” and then
press “Edit” soft key.
Press
group.
Name
ia
fro
nt
key to select an appropriate
Group
In
01.Default
02.Colleagues
03.VIPs
04.Family
OK
OK
Clear
Press “OK” soft key to search.
Name
Back
005.Eric
001.John
010.Ken
003.Kenny
Press “OK” soft key and then the display
returns to the previous one.
Detail
Edit
Ken
Colleagues
222
Tel #2
Save
Edit
Ken
ab
NE
Press
key and then input name you
want to search.
Back
17
Back
-
Press “Detail” soft key and then press
key to select a phone number input area you
want to add.
Name
OK
If you select a phone number area
registered a phone number already,
the area is overwritten by new
phone number.
Press “OK” soft key. Your phone displays.
nf
Back
id
TIP
en
tia
14581237654
Ken
Colleagues
14581237654
222
Save
Edit
ia
Back
Press “Save” soft key to save the added data
to Directory. The display returns to the
previous one.
NE
In
fro
nt
Co
Directory 010
18
-
• TO DELETE A CALL HISTORY
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “1.Call History” and
then press
key.
Press
key to select a history you want
to view on the list and then press
key.
Press
key to select a phone number
you want to delete and then press “Delete”
soft key.
1.Outgoing
2.Incoming
3.All
OK
Delete
id
All Delete
nf
Del. all histories?
1.Cancel
2.OK
Press
key to select “2.OK” and then
press “OK” soft key.
TIP
Delete this entry?
1.Cancel
2.OK
TIP
nt
Back
You can press
key to delete
instead of above operation.
fro
TIP
ia
Incoming
OK
OK
Back
Co
Back
Press
key to select “2.OK” and then
press “OK” soft key.
Incoming
8/31 10:03 Tom
8/31 9:25 Privat
8/30 19:53 Kenny
8/30 15:44 Eric
Delete
Save
Back
All Delete
en
tia
Press
key to select a history you want
to delete and then press “OK” soft key.
In
Press
key to select “1.Call History” and
then press
key.
Press
key to select “4.All Delete” and
then press
key.
NE
Press
key in Standby mode. Your
phone displays the main menu.
You can delete all call histories by
pressing following keys.
Delete Outgoing Call Histories:
Delete Incoming Call Histories:
Delete All Call Histories:
• TO DELETE ALL CALL
HISTORIES
If you delete all Incoming Call
histories, Missed Call histories
also are deleted.
19
NE
In
fro
nt
ia
Co
nf
id
en
tia
This page is for your notes.
20
6.DIRECTRY
Press
key to select “1.Personal” and
then press
key. Your phone displays
Search menu.
en
tia
Directory can register up to 500 records. You
can view, edit or delete the 500 entries.
• TO VIEW DIRECTORY
Press
Your phone displays as follow.
Search
key in Standby mode.
1.Group
2.Name
3.Tel number
4.Others
All
By pressing
or
key while
displaying Directory, you can
scroll a list as follow.
ia
All <> ABC <> DEF <> GHI<> JKL
<> MNO <> PQRS <> TUV <>
WXYZ <> Other <>
nt
By pressing
to
key and
holding for about 1 second in
Standby mode, you can use
Alphabet Search.
fro
TIP
• TO SEARCH DIRECTORY
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “2.Directory” and
then press
key.
Press
key to select a Group you want
to search and then press “OK” soft key.
Group
01.Default
02.Colleagues
03.VIPs
004.Family
OK
Back
Your phone displays searched records.
005.Eric
001.John
010.Ken
003.Kenny
Delete
Detail
NE
Press
press
key to select “1.Group” and then
key.
Group
In
nf
To Search by Group:
Back
Co
TIP
id
007.Aaron
005.Eric
001.John
010.Ken
Delete
Detail
key to select “1.Search” and then
key.
21
Back
To Search by Name:
To Search by Memory ID:
Press
press
key to select “2.Name” and then
key.
Press
press
Enter a name or letter you want to search
and then press “OK” soft key.
Press
key to select “1.Memory ID” and
then press
key.
Enter a Memory ID (3 digits) you want to
search and then press “OK” soft key.
en
tia
Name
key to select “4.Others” and then
key.
Memory ID
Ken
Clear
003
12
Your phone displays searched records.
Name
005.Eric
001.John
010.Ken
003.Kenny
Delete
Detail
Memory ID
Co
003.Kenny
Back
nt
Press
key to select “3.Tel number” and
then press
key.
fro
Enter a phone number you want to search
and then press “OK” soft key.
Name
OK
Press
press
key to select “4.Others” and then
key.
Press
key to select “2.Alphabet” and
then press
key.
Press
key to select an Alphabet you
want to search and then press “OK” soft
key.
2.ABC
3.DEF
4.GHI
5.JKL
Tel Number
OK
001.John
004.Tom
Detail
Alphabet
Your phone displays searched records.
Delete
Back
To Search by Alphabet:
Clear
NE
12
In
1262123
Detail
ia
To Search by Tel number:
Clear
Your phone displays searched records.
Delete
OK
id
OK
nf
ab
Back
22
Back
-
Your phone displays searched records.
TIP
JKL
Go to Group Search menu:
001.John
010.Ken
003.Kenny
Go to Name Search menu:
Detail
en
tia
Delete
Back
Go to Tel Number Search menu:
To Search by Company:
Go to Memory ID Search menu:
key to select “4.Others” and then
key.
Press
key to select “3.Company” and
then press
key.
Enter a Company name you want to search
and then press “OK” soft key.
Go to Alphabet Search menu:
id
Press
press
Go to Company Search menu:
nf
Co
Company
Clear
Your phone displays searched records.
Company
Back
NE
In
fro
007.Aaron
001.John
010.Ken
004.Tom
Delete
Detail
nt
OK
ia
NEC
ab
You can reach each Search menu
by pressing following keys.
23
• TO SETUP GROUP
To Edit Group Name:
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “2.Directory” and
then press
key.
Enter a Group Name you want and then
press “OK” soft key.
Press
key to select “3.Group Setting”
and then press
key. Your phone displays
Group Setting menu.
Customer
01.Default
02.Colleagues
03.VIPs
004.Family
005.Friends
ab
nf
To Setup Group Ring Tone:
Press
key to select “2.Ring Tone” and
then press
key.
Press
key to select a Group Ring Tone
you want and then press “OK” soft key.
Press
key to select a Group you want to
setup and then press
key.
ia
fro
In
NE
Back
The display returns to the previous one.
TIP
24
Ring Tone
01.Disable
02.Default
03.Tone Type1
04.Tone Type2
Play
OK
nt
GroupSetting
Clear
The display returns to the previous one.
Co
Go to Group Setting menu:
OK
id
You can reach Group Setting
TIP
menu by pressing following keys.
1.Name
2.Ring Tone
3.Illumination
4.Vibrator
en
tia
Name
GroupSetting
key to select “1.Name” and then
key.
By pressing “Play” and “Stop”
soft key, you can hear the Ring
Tone while you select a Group
Ring Tone.
To Setup Group Illumination:
• TO ADD A NEW ENTRY
Press
key to select “2.Ring Tone” and
then press
key.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select a Group Illumination
you want and then press “OK” soft key.
Press
key to select “2.Directory” and
then press
key.
Press
press
menu.
1.Disable
2.Default
3.Red
4.Green
On
OK
Name
Group
Tel #1
Tel #2
Back
id
The display returns to the previous one.
Edit
By pressing “On” and “Stop” soft
TIP
key, you can view the Illumination
while you select a Group
Illumination.
Press
key to select “4.Vibrator” and
then press
key.
Press
key to select a Group Vibrator
you want and then press “OK” soft key.
nt
fro
1.Disable
2.Default
3.Pattern1
4.Pattern2
Conf
OK
ia
Vibrator
In
Name
Donald E.
ab
TIP
Back
The display returns to the previous one.
OK
Clear
Name information is minimum
requirement to save the data.
Press “OK” soft key to write the data. The
display returns to the previous screen.
Edit
By pressing “Conf” and “Stop”
soft key, you can confirm the
Vibrator pattern while you select a
Group Vibrator.
Donald E.
Group
Tel #1
Tel #2
Save
Edit
NE
TIP
Edit the selected item. In the following
example, Name data is edited.
Co
To Setup Group Vibrator:
Back
Press
key to select an Item you want to
edit and then press “Edit” soft key.
Edit
nf
key to select “2.Edit” and then
key. Your phone displays Edit
en
tia
Illumination
25
Back
-
Press
key to select an Item you want to
edit and then press “Edit” soft key.
Edit the selected item. In the following
example, Tel #1 data is edited.
en
tia
Tel #1
14581233333
OK
Clear
Press “OK” soft key to write the data. The
display returns to the previous screen.
Repeat these steps as required for the new
entry.
nf
id
12
Donald E.
Group
14581233333
Tel #2
Save
Edit
ia
Back
When edit is completed, press “Save” soft
key.
You can reach Directory Edit menu
by pressing following keys.
fro
TIP
nt
Co
Edit
NE
In
Go to Directory Edit menu:
26
• TO DELETE A RECORD
TIP
You can delete a record from the Directory.
Press
key in Standby mode.
Your phone displays as follow.
Delete All Directory:
All
• TO MAKE A CALL FROM
DIRECTORY
007.Aaron
005.Eric
001.John
010.Ken
Delete
Detail
Back
Press
key to select a record you want to
delete and then press “Delete” soft key.
Press
Press
Your phone displays as follow.
All
007.Aaron
005.Eric
001.John
010.Ken
Delete
Detail
nf
key to select “OK” soft key.
Directory
Back
ia
OK
Back
Co
Delete this entry?
1.Cancel
2.OK
nt
You can press
key to delete
instead of above operation.
fro
• TO DELETE ALL RECORDS
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “2.Direcory” and
then press
key.
Press
key to select “5.All Delete” and
then press
key.
Press
key to select “2.OK” and then
press “OK” soft key.
Press
key to select a party you want to
make a call and then press
key.
Your phone displays the phone number list
as follow.
Number
1.14581234567
2.12621234567
3.200
Prefix
NE
In
All Delete
Del. all Directory?
1.Cancel
2.OK
OK
key in Standby mode.
id
TIP
en
tia
You can delete all records in the
Directory by pressing following
keys.
Back
27
Call
Back
Press
key or “Call” soft key to make
the call after you select a phone number by
pressing key.
• TO EDIT AN ENTRY
You can edit a registered Directory.
• TO CONFIRM YOUR PHONE
NUMBER
Press
Your phone displays as follow.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “2.Direcory” and
then press
key.
Press
key to select “4.Own Number”
and then press
key. Your phone
displays.
key in Standby mode.
007.Aaron
005.Eric
001.John
010.Ken
Delete
Detail
Own Number
Back
Press
key to select a record you want to
edit and then press “Detail” soft key.
id
en
tia
All
nf
Directory 001
John
Colleagues
14581234567
12621234567
Edit
You can confirm your phone
number by pressing following
keys.
Co
TIP
223
Back
Confirm Your Phone Number:
Back
Press
key to select an item you want to
edit and then press “Edit” soft key.
When all edit is completed, press “Save”
soft key.
NE
In
fro
nt
ia
28
7.SPEED DIAL/PRESET DIAL
In Standby mode, press a function key
to
) to select one Speed Dial
entry that has already registered in your
phone. For example, press
key to
make a call to “F3.Ken” that is listed as F3
entry.
You can enable Function Key as
Speed Dial by pressing following
keys.
Enable Speed Dial:
When you enable Function Key as
Speed Dial, Function Keys do not
work as system function key.
nf
id
TIP
Assign Dial
Back
ia
OK
Co
F1.John
F2.Eric
F3.Ken
F4.Kenny
• TO ENABLE SPEED DIAL
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “6.Keypad Mode”
and then press
key.
Press
key to select “2.Finction Key”
and then press
key. Your phone displays
Function Key menu.
nt
NE
In
fro
key to select “5.Setting” and then
key.
Function Key
1.Default
2.Speed Dial
OK
en
tia
TIP
• TO USE SPEED DIAL
Press
key to select “2.Speed Dial” and
then press “OK” soft key.
You can use Speed Dial assigned multi function
keys (up to 8 entries) and Preset Dial assigned
dial keys (up to 10 entries).
Back
29
• TO USE PRESET DIAL
In Standby mode, press a dial pad
to
) to select one Preset
Dial entry that has already registered in
your phone. For example, press
key
and hold for about 1 second to make a call
to “D3.Tom” that is listed as D3 entry.
• TO ADD NEW ENTRY/EDIT
Press
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “6.Keypad Mode”
and then press
key.
Press
key to select “4.Assign Dial” and
then press
key. Your phone displays
Assign Dial menu.
Back
key to make the call.
Press
key in Standby mode. Your
phone displays the main menu.
key to select “5.Setting” and then
key.
nf
en
tia
Assign Dial
D1.Aaron
D2.Donald E.
D3.Tom
D4.Jim
OK
When you enable Dial Key as
Preset Dial, Dial Keys do not work
as Alphabet Search function key.
id
TIP
• TO ENABLE PRESET DIAL
Assign Dial
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “6.Keypad Mode”
and then press
key.
Press
key to select “3.Dial Key” and
then press
key. Your phone displays
Dial Key menu.
F7.
F8.
D1.Aaron
D2.Donald E.
Co
ia
key to select “5.Setting” and then
key.
nt
OK
Back
Press
key to select a key you want to
add/edit and then “OK” soft key.
Assign Dial
fro
1.Name
2.TEL
Dial Key
In
1.Alphabet Search
2.Preset Dial
NE
OK
OK
Press
key to select an item you want to
edit and then press “OK” soft key.
When all edit is completed, press “Back”
soft key.
Back
Press
key to select “2.Preset Dial” and
then press “OK” soft key.
Back
Assign Dial
You can enable Dial Key as Preset
TIP
Dial by pressing following keys.
F7.Bill
F8.
D1.Aaron
D2.Donald E.
Enable Preset Dial:
OK
30
Back
Various settings such as Incoming Call, Talk,
Display, Password, Password Lock, Keypad
Mode and Date & Time can be modified as
required on your phone.
• RING TONE
8.SETTING
en
tia
Factory Default: Tone Type1 (All kind)
• RING VOLUME
You can select ring tone on a call kind basis
(External Ring, Internal Ring, IM and
Non-notification).
Factory Default: Middle
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select “1.Ring Volume”
and then press
key.
Ring Volume can be set in 5 levels (Off,
Graduate, Small, Middle and Large).
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select “2.Ring Tone” and
then press
key.
Co
Press
key to select a call kind you want
to change a ring tone and then press
key.
ia
Ring Tone
Press
key to select an appropriate
volume and then press “OK” soft key.
In
Large
fro
Ring Volume
OK
Back
Press
key to select a ring tone you want
and then press “OK” key.
Ring Tone
You can reach Ring Volume menu
by pressing following keys.
01.Tone
02.Tone
03.Tone
04.Tone
Play
NE
TIP
1.External Ring
2.Internal Ring
3.IM
4.Non-notification
nt
key to select “5.Setting” and then
key.
key to select “5.Setting” and then
key.
id
nf
You can adjust ring tone volume.
Go to Ring Volume menu:
TIP
31
Type1
Type2
Type3
Type4
OK
Back
By pressing “Play” and “Stop”
soft key, you can hear the Ring
Tone while you select a Ring Tone.
TIP
You can reach Ring Tone menu by
pressing following keys.
• ILLUMINATION
Go to Ring Tone menu:
You can select an illumination color of Info LED
on a call kind basis (External Ring, Internal Ring,
IM and Non-notification).
Factory Default: Green (All kind)
Press
key in Standby mode. Your
phone displays the main menu.
Factory Default: Disable
Your phone can display a popup window while
ringing.
Press
press
en
tia
• INCOMING POPUP
key to select “5.Setting” and then
key.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “1.User Setting” and
then press
key.
Press
press
key to select “5.Setting” and then
key.
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “4.Illumination” and
then press
key.
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select a call kind you want
to change an illumination and then press
key.
Press
key to select “3.Incoming Popup”
and then press
key.
Press
key to select “1.Popup mode” and
then press
key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
Co
nf
id
ia
1.External Ring
2.Internal Ring
3.IM
4.Non-notification
Press
key to select an illumination you
want and then press “OK” key.
fro
1.Disable
2.Enable
nt
Popup
1.Disable
2.Red
3.Green
4.Orange
On
Back
When a caller is not registered in
your Directory, your phone does
not display a popup window even
if this feature is enabled.
NE
TIP
Ring Tone
In
OK
TIP
Illumination
You can reach Incoming Popup
menu by pressing following keys.
Go to Incoming Popup menu:
OK
Back
TIP
By pressing “On” and “Stop” soft
key, you can view the Illumination
while you select an Illumination.
TIP
You can reach Illumination menu
by pressing following keys.
Go to Illumination menu:
32
• PRIVATE CALL
• VIBRATOR
Factory Default: Allow Incoming
Factory Default: Pattern1 (All kind)
Your can block incoming calls without Caller
ID.
You can select a vibrator pattern on a call kind
basis (External Ring, Internal Ring, IM and
Non-notification).
Press
key to select “1.User Setting” and
then press
key.
Press
press
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “5.Private Call” and
then press
key.
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select “6.Vibrator” and
then press
key.
Press
key to select a call kind you want
to change a vibrator and then press
key.
Press
press
Press
key to select “1.Allow Incoming”
or “2.Block Incoming” and then press
“OK” soft key.
Co
Private Call
OK
Back
ia
1.Allow Incoming
2.Block Incoming
You can reach Private Call menu
by pressing following keys.
nt
TIP
key to select “5.Setting” and then
key.
Press
key in Standby mode. Your
phone displays the main menu.
en
tia
key to select “5.Setting” and then
key.
id
Press
key in Standby mode. Your
phone displays the main menu.
nf
Vibrator
1.External Ring
2.Internal Ring
3.IM
4.Non-notification
Press
key to select a vibrator you want
and then press “OK” key.
Go to Private Call menu:
fro
Vibrator
In
1.Disable
2.Pattern1
3.Pattern2
NE
Conf
OK
Back
TIP
By pressing “Conf” and “Stop”
soft key, you can confirm the
Vibrator while you select a
Vibrator.
TIP
You can reach Vibrator menu by
pressing following keys.
Go to Vibrator menu:
33
• INCOMING MODE
• HEADSET
Factory Default: Both
Factory Default: Headset (Ring Tone
Sending), None (Auto response)
Your can select an incoming mode of Ring and
Vibrator.
Your can modify a headset mode.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
key to select “5.Setting” and then
key.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select “7.Incoming Mode”
and then press
key.
Press
key to select “8.Headset” and
then press
key. Your phone displays.
Press
key to select “1.Both”, “2.Ring
Vib” or “3.Vib
Ring” and then press
“OK” soft key.
Vib
Ring
OK
en
tia
id
nf
1.Ring Tone Sending
2.Auto Response
Back
Ring Tone Sending:
You can reach Incoming Mode
menu by pressing following keys.
nt
TIP
Headset
ia
1.Both
2.Ring
3.Vib
key to select “5.Setting” and then
key.
Co
IncomingMode
Press
key to select “1.Ring Tone
Sending” and then press
key.
Press
key to select “1.Headset”or
“2.Speaker” and then press “OK” soft key.
fro
Go to Incoming Mode menu:
Ring Sending
In
1.Headset
2.Speaker
NE
OK
Back
The display returns to the previous one.
TIP
You can reach Ring Tone Sending
of Headset menu by pressing
following keys.
Go to Ring Tone Sending menu:
34
Auto Response:
• OFFHOKK RING
Press
key to select “2.Auto Response”
and then press
key.
Factory Default: Enable
Press
key to select an auto response
times you want and then press “OK” soft
key.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.Incoming Call”
and then press
key.
Press
key to select “9.Offhook Ring”
and then press
key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
OK
The display returns to the previous one.
You can reach Auto Response of
Headset
menu
by
pressing
following keys.
Offhook Ring
1.Disable
2.Enable
fro
nt
ia
Go to Auto Response menu:
nf
TIP
Co
Back
en
tia
0.None
1.1 time
2.2 times
3.3 times
key to select “5.Setting” and then
key.
id
AutoResponse
Your can accept second incoming call.
OK
Back
TIP
This feature does not
depending on your system.
TIP
You can reach Offhook Ring menu
by pressing following keys.
NE
In
Go to Offhook RIng menu:
35
work
• HOLD MUSIC
Factory Default: Disable
Factory Default: Tone Type12
Your phone can provide an alarm if RTP packet
loss is suspected.
You can select a music that is provided while
your phone is in hold status.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
key to select “5.Setting” and then
key.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.User Setting” and
then press
key.
Press
press
key to select “2.Talk” and then
key.
Press
press
Press
key to select “1.RTP Alarm” and
then press
key.
Press
key to select “2.Hold Music” and
then press
key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
Press
key to select a music you want
and then press “OK” soft key.
key to select “5.Setting” and then
key.
nf
id
key to select “2.Talk” and then
key.
Hold Music
Co
RTP Alarm
OK
Back
ia
1.Disable
2.Enable
You can reach RTP Alarm menu by
pressing following keys.
nt
TIP
en
tia
• RTP ALARM
09.Tone
10.Tone
11.Tone
12.Tone
Play
Type9
Type10
Type11
Type12
OK
Back
TIP
By pressing “Play” and “Stop”
soft key, you can hear the Music
while you select Music.
TIP
You can reach Hold Music menu
by pressing following keys.
fro
Go to RTP Alarm menu:
NE
In
Go to Hold Music menu:
36
• CALL VOLUME
• HANDOVER TONE
Factory Default: Middle
Factory Default: Disable
You can adjust receiver volume.
Your phone can provide a warning tone when
handover takes place.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
press
key to select “2.Talk” and then
key.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “3.Call Volume” and
then press
key.
Press
press
Call Volume can be set in 3 levels (Small,
Middle and Large).
Press
key to select “1.User Setting” and
then press
key.
Press
key to select an appropriate
volume and then press “OK” soft key.
Press
press
id
You can reach Call Volume menu
by pressing following keys.
fro
Go to Call Volume menu:
key to select “2.Talk” and then
key.
nf
Co
Back
nt
OK
key to select “5.Setting” and then
key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
ia
Large
en
tia
Handover is the process of
transferring a wireless phone user
from one Access Point to another.
Press
key to select “4.Handover Tone”
and then press
key.
Call Volume
TIP
TIP
key to select “5.Setting” and then
key.
HandoverTone
1.Disable
2.Enable
OK
TIP
Back
You can reach Handover Tone
menu by pressing following keys.
NE
In
Go to Handover Tone menu:
37
• TALK START VIBRATOR
• LCD CONTRAST
Factory Default: Disable
Factory Default: 3
Vibrator can work as talk start notification when
a called party answers your call.
You can adjust LCD contrast.
Press
key to select “1.User Setting” and
then press
key.
Press
press
key to select “5.Setting” and then
key.
key to select “2.Talk” and then
key.
Press
key to select “5.Talk Start Vib”
and then press
key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “3.Display” and
then press
key.
Press
key to select “1.LCD Contrast”
and then press
key.
LCD Contrast can be set in 5 levels (1 to 5).
Press
key to select an appropriate
contrast and then press “OK” soft key.
key to select “5.Setting” and then
key.
Co
TalkStartVib
1.Disable
2.Enable
LCD Contrast
Back
ia
OK
You can reach Talk Start Vib menu
by pressing following keys.
nt
TIP
Press
press
Press
key in Standby mode. Your
phone displays the main menu.
en
tia
id
Press
key in Standby mode. Your
phone displays the main menu.
nf
NE
In
fro
Go to Talk Start Vib menu:
38
TIP
OK
Back
You can reach LCD Contrast menu
by pressing following keys.
Go to LCD Contrast menu:
• BACK LIGHT
• FONT SIZE
Factory Default: 5sec
Factory Default: Standard
You can adjust a timer until LCD back light is
off.
You can select a font size.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “3.Display” and
then press
key.
Press
key to select “2.Back Light” and
then press
key.
Back Light can be set 5 to 30 seconds.
Edit an appropriate timer value and then
press “OK” soft key.
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “3.Display” and
then press
key.
Press
key to select “3.Font Size” and
then press
key.
Press
key to select “1.Standard” or
“2.Large” and then press “OK” soft key.
key to select “5.Setting” and then
key.
Font Size
Co
Clear
TIP
nt
TIP
ia
10
OK
Press
press
1.Standard
2.Large
Back Light
12
nf
key to select “5.Setting” and then
key.
Press
key in Standby mode. Your
phone displays the main menu.
en
tia
Press
key in Standby mode. Your
phone displays the main menu.
id
You can reach Back Light menu by
pressing following keys.
NE
In
fro
Go to Back Light menu:
39
OK
Back
You can reach Font Size menu by
pressing following keys.
Go to Font Size menu:
• LANGUAGE
• MY NAME
Factory Default: English
Factory Default: -
The information on the LCD can be displayed in
English or Japanese. You can switch between 2
languages as follow.
Your phone can display specific strings (up to 10
characters) such as your name in Standby mode.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “3.Display” and
then press
key.
Press
key to select “4.Language” and
then press
key.
key to select “5.Setting” and then
key.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “3.Display” and
then press
key.
Press
key to select “5.Language” and
then press
key.
Edit strings you want to display in Standby
mode. and then press “OK” soft key.
key to select “5.Setting” and then
key.
Press
key to select “1.Japanese” or
“2.English” and then press “OK” soft key.
nf
Press
key in Standby mode. Your
phone displays the main menu.
en
tia
Press
key in Standby mode. Your
phone displays the main menu.
id
My Name
Co
Language
1.Japanese
2.English
OK
You can reach Language menu by
pressing following keys.
nt
TIP
Back
ia
Mike
NE
In
fro
Go to Language menu:
40
TIP
ab
OK
Clear
You can reach My Name menu by
pressing following keys.
Go to My Name menu:
• DISPLAY PATTERN
• CHANGE PASSWORD
Factory Default: Normal
Factory Default: -
Your phone can display reversed LCD pattern.
You can change a password that is used for
Password Lock or Configuration.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “3.Display” and
then press
key.
Press
key to select “6.Display Pattern”
and then press
key.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.Normal” or
“2.Reversiong” and then press “OK” soft
key.
Use 4 numeric characters for a
password.
Back
Enter your current password and then press
“OK” soft key.
Change Pass.
Old Password:
ia
OK
key to select “5.Setting” and then
key.
Press
key to select “4.Change Password”
and then press
key.
Co
1.Normal
2.Reversing
en
tia
TIP
Disp Pattern
You can reach Display Pattern
menu by pressing following keys.
nt
TIP
Please contact your network
administrator
to
know
your
password.
id
TIP
nf
key to select “5.Setting” and then
key.
12
fro
Go to Display Pattern menu:
OK
****
Clear
Enter new password you want and then
press “OK” soft key.
In
Change Pass.
NE
New Password:
12
TIP
OK
1234
Clear
You can reach Change Password
menu by pressing following keys.
Go to Change Password menu:
41
• SPEAKER MONITOR
Factory Default: Disable
Factory Default: Disable
You can sound or mute a tone that is provided
when you press any key on your phone.
You can use Speaker monitor while talking as
required.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
key to select “5.Setting” and then
key.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “6.Keypad Mode”
and then press
key.
Press
key to select “6.Keypad Mode”
and then press
key.
Press
key to select “1.Key Touch Tone”
and then press
key.
Press
key to select “5.Speaker monitor”
and then press
key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
nf
id
key to select “5.Setting” and then
key.
Spk monitor
Co
KeyTouchTone
1.Disable
2.Enable
OK
Back
ia
1.Disable
2.Enable
You can reach Key Touch Tone
menu by pressing following keys.
nt
TIP
en
tia
• KEY TOUCH TONE
NE
In
fro
Go to Key Touch Tone menu:
42
TIP
OK
Back
You can Speaker monitor menu by
pressing following keys.
Go to Speaker monitor menu:
• TIME
Factory Default: 2008/ 1/ 1 (YYYY/MM/DD)
Factory Default: 0: 0 (HH:MM)
You can adjust date information of your phone
as required.
You can adjust time information of your phone
as required.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
key to select “5.Setting” and then
key.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “7.Date & Time”
and then press
key.
Press
key to select “7.Date & Time”
and then press
key.
Press
press
key to select “1.Date” and then
key.
Press
press
Press
key to adjust Year, Month and
Day and then press “OK” soft key.
Press
key to adjust Year, Month and
Day and then press “OK” soft key.
nf
id
key to select “2.Time” and then
key.
Time
OK
Back
ia
2008/ 9/ 2
NE
In
fro
nt
You can Date menu by pressing
following keys.
Go to Date menu:
key to select “5.Setting” and then
key.
Co
Date
TIP
en
tia
• DATE
43
TIP
16: 0
OK
Back
You can Time menu by pressing
following keys.
Go to Time menu:
• TIME FORMAT
• DATLIGHT SAVING
Factory Default: 12hours
Factory Default: Disable
You can select a time format (12hours, 12hours
(AM0:00) and 24hours) as required.
You can use daylight saving as required.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “7.Date & Time”
and then press
key.
Press
key to select “3.Time Format”
and then press
key.
Press
key to select “1.12hours”,
“2.12hours(AM0:00)” or “3.24hours” and
then press “OK” soft key.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “7.Date & Time”
and then press
key.
Press
key to select “4.Daylight Saving”
and then press
key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
Daylight Sav
1.Disable
2.Enable
Co
Time Format
OK
Back
ia
1.12hours
2.12hours(AM0:00)
3.24hours
TIP
You can Time Format menu by
pressing following keys.
nt
TIP
key to select “5.Setting” and then
key.
nf
key to select “5.Setting” and then
key.
Press
key in Standby mode. Your
phone displays the main menu.
en
tia
Press
key in Standby mode. Your
phone displays the main menu.
id
NE
In
fro
Go to Time Format menu:
44
OK
Back
You can Daylight Saving menu by
pressing following keys.
Go to Daylight Saving menu:
• NTP SERVER
Factory Default: Disable
Factory Default: -
You can use NTP server in your network as
required.
You can set NTP server in your network as
required.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
key to select “5.Setting” and then
key.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “7.Date & Time”
and then press
key.
Press
key to select “7.Date & Time”
and then press
key.
Press
key to select “5.NTP Setting” and
then press
key.
Press
key to select “6.NTP Server” and
then press
key.
Press
key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
Edit an appropriate NTP Server Address (IP
or FQDN) and then press “OK” soft key.
en
tia
• NTP SETTING
nf
id
key to select “5.Setting” and then
key.
NTP Setting
Co
NTP Server
1.Disable
2.Enable
OK
Back
ia
time.xxxx.com
ab
OK
Clear
Please confirm your network
administrator whether you can use
NTP Server.
TIP
Please contact your network
administrator to know NTP Server
Address.
TIP
You can NTP Setting menu by
pressing following keys.
TIP
You can NTP Server menu by
pressing following keys.
fro
nt
TIP
Go to NTP Server menu:
NE
In
Go to NTP Setting menu:
45
• TIME ZONE
Factory Default: GMT+00:00
Press
key in Standby mode. Your
phone displays the main menu.
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “7.Date & Time”
and then press
key.
Press
key to select “7.Time Zone” and
then press
key.
Press
key to adjust an appropriate time
offset and then press “OK” soft key.
Co
nf
id
key to select “5.Setting” and then
key.
Time Zone
OK
Back
ia
GMT-08:00
You can Time Zone menu by
pressing following keys.
nt
TIP
en
tia
You can set time offset in the range -12:00 to
+14:00, which specifies time offset between
GMT and your area.
NE
In
fro
Go to Time Zone menu:
46
9.INFORMATION
You can confirm the information of your phone
such as Phone No., IP address and MAC
address.
en
tia
• TO DISPLAY WIRELESS
STATUS
You can confirm the Wireless Status of your
phone as follow.
• TO DISPLAY STATUS
BSSID
You can confirm the Status of your phone as
follow.
MAC address
Press
key to select “0.Information” and
then press
key.
Rate
IP address
key to select “1.Status” and then
key.
Netmask
Co
Press
press
Security
nf
Press
key in Standby mode. Your
phone displays the main menu.
id
Channel
Wireless Status
ESSID
SIP Status
Gateway
DNS Primary
Status
DNS Secondary
ia
SIP Status
Registered
Press
key in Standby mode. Your
phone displays the main menu.
Connected
Back
Press
key to select “0.Information” and
then press
key.
Press
key to select “2.Wireless” and
then press
key.
nt
Wireless Status
You can view Status by pressing
following keys.
fro
TIP
Wireless
View Status:
In

1.BSSID
00:0D:02:11:22:33
2.ESSID
NE
Back
TIP
You can view Wireless Status by
pressing following keys.
View Wireless Status:
47
• TO DISPLAY SIP STATUS
You can confirm the SIP Status of your phone as
follow.
SIP Status
Phone No.
en
tia
SIP Proxy
SIP Port
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “0.Information” and
then press
key.
Press
press
id
REGISTER
nf
key to select “3.SIP” and then
key.
1.SIP Status
Registered
2.Phone No.
You can view SIP Status
pressing following keys.
NE
In
fro
View SIP Status:
by
nt
TIP
ia
223
Back
Co
SIP
48
10.PASSWORD LOCK
You can lock your phone against unauthorized
usage. This is also useful for guarding your
phone against inadvertent button presses.
• TO USE MANUAL LOCK
en
tia
Factory Default: Disable
• TO ENBLE MANUAL LOCK
Press
key in Standby mode. Your
phone displays the main menu.
Press and hold
key for 2 seconds or
more to lock your phone in Standby mode.
Press
press
Your phone is locked and displays a lock
icon ( ).
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “5.Password Lock”
and then press
key.
Press
key to select “1.Manual lock” and
then press
key.
• TO UNLOCK YOUR PHONE
Press
key to select “2.Enable” and then
press “OK” soft key.
Press any key except
key and then
input your password (4 digits).
nt
OK
fro
12
****
Clear
ia
Input Passwd
Your phone is unlocked and a lock icon
( ) disappears.
Please contact your network
administrator
to
know
your
password.
NE
TIP
TIP
Manual
1.Disable
2.Enable
OK
Back
You can reach Manual lock menu
by pressing following keys.
Go to Manual lock menu:
In
Co
nf
You can make an Emergency Call
TIP
even if your phone is locked.
key to select “5.Setting” and then
key.
id
49
• TO USE OUTSIDE LOCK
• TO USE POWEROFF LOCK
Factory Default: 0sec (Disable)
Factory Default: Disable
When your phone is in out of service area, your
phone is locked automatically expire timer you
set.
When your phone is turned on after power off,
your phone is locked automatically.
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “5.Password Lock”
and then press
key.
Press
key to select “2.Auto lock” and
then press
key.
key to select “5.Setting” and then
key.
Press
key to select “1.Outside Lock”
and then press
key.
Edit an appropriate timer value (0:disable to
3600sec) and then press “OK” soft key.
Outside Lock
Press
key to select “1.User Setting” and
then press
key.
Press
key to select “5.Password Lock”
and then press
key.
Press
key to select “2.Auto lock” and
then press
key.
Press
key to select “2.PowerOff Lock”
and then press
key.
Press
key to select “2.Enable” and then
press “OK” soft key.
ia
Clear
nt
OK
key to select “5.Setting” and then
key.
PowerOffLock
1.Disable
2.Enable
10
12
Press
press
Co
Press
press
Press
key in Standby mode. Your
phone displays the main menu.
en
tia
id
Press
key in Standby mode. Your
phone displays the main menu.
nf
fro
You can reach Outside Lock menu
TIP
by pressing following keys.
TIP
OK
Back
You can reach PowerOff Lock
menu by pressing following keys.
Go to PowerOff Lock menu:
NE
In
Go to Outside Lock menu:
50
11.PREFIX DIAL
Press
key to view a call history you want
and then press
key to select a phone
number you want.
Press
soft key.
To Make a Call by preset dialing:
Enter the phone number and then press
“Prefix” soft key.
Prefix
Clear
Press
key to select Prefix and then
“Call” soft key.
id
fro
nt
Prefix
01181
Prefix
ia
Add
nf
9/ 2 Tue 09:42AM
356551234
Back
NE
In
Call
key and then press “Prefix”
9/ 2 Tue 09:44AM
4581212
Co
en
tia
• TO USE PREFIX DIAL
You can use Prefix Dial as follow.
To Make a Call from Call History:
You can add Prefix Dial to phone number when
you make a call.
51
Add
Clear
Press
key to select Prefix and then
“Call” soft key.
Prefix
01181
Call
Back
To Make a Call from Directory:
• TO REGISTER PREFIX NO.
Factory Default: -
key to
Number
1.4581234444
2.1234555
Call
Press
press
Press
key to select “1.User Setting” and
then press
key.
Press
press
Press
key to select “6.Reg. Prefix No.”
and then press
key.
Press
key to select a registered area and
then press
key.
Back
Press “Prefix” soft key.
Press
key to select Prefix and then
“Call” soft key.
key to select “5.Setting” and then
key.
key to select “2.Talk” and then
key.
Prefix
nf
Prefix
Press
key in Standby mode. Your
phone displays the main menu.
Press
key and then press
select a phone number you want.
en
tia
key to view Directory and then
key to select a called party you
id
Press
press
want.
1.
2.
3.
4.
Co
Prefix
Back
Edit prefix number you want and then press
“OK” soft key.
Prefix
fro
nt
Call
ia
01181
In
12
TIP
OK
Clear
You can reach Register Prefix No.
menu by pressing following keys.
NE
Go to Register Prefix No. menu:
52
12.FAVORITES
• TO ENTRY A MENU TO
FAVORITES
• TO USE FAVORITES
Press
key in Standby mode. Your
phone displays the main menu.
en
tia
You can use favorites menu that you can
customize.
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “#.Favorites” and
then press
key.
Press
key to select “#.Favorites” and
then press
key.
Press
key to select a menu you want to
use and then press “OK” soft key.
Press
press
id
Favorites
1.No
2.No
3.No
4.No
Entry
Entry
Entry
Entry
1.Information
2.Group Setting
3.Own Number
4.RTP Alarm
Delete
OK
Back
Co
nf
Favorites
You can reach Favorites menu by
pressing following keys.
In
fro
nt
Go to Favorites menu:
ia
TIP
key to select an entry area and then
key.
Save
Back
Press
key and
key to select a menu
you want to entry and then press “Save”
soft key.
• TO DELETE A MENU FROM
FAVORITES
Press
key in Standby mode. Your
phone displays the main menu.
Press
key to select “#.Favorites” and
then press
key.
Press
key to select an entry area and then
press “Delete” soft key.
Favorites
NE
1.Information
2.Group Setting
3.Own Number
4.RTP Alarm
Delete
OK
53
Back
Press
key and
key to select a menu
you want to entry and then press “Save”
soft key.
NE
In
fro
nt
ia
Co
nf
id
en
tia
This page is for your notes.
54
13.MENU LIST
• MENU LIST
Menu
0.Information
1.Call History
2.Directory
3.Tool
4.Voice Mail
5.Setting
#.Favorites
Co
ia
nt
fro
In
NE
55
Remarks
This is main menu of the phone.
nf
MENU
Default
id
Category
en
tia
The following shows the menu list of MH240 with the default values and remarks as required.
SIP Status
Not Register / Registering
/ Registered
Wireless Status
Not Connect / Connected
BSSID
xx:xx:xx:xx:xx:xx
ESSID
Channel
1 to 11
MAC address
xx:xx:xx:xx:xx:xx
Security
OPEN / WEP / WPA-PSK
/ WPA2-PSK / WPA
/WPA2
Rate
1 to 54 Mbps
IP address
xxx.xxx.xxx.xxx
Netmask
xxx.xxx.xxx.xxx
Gateway
xxx.xxx.xxx.xxx
DNS Primary
xxx.xxx.xxx.xxx
DNS Secondary
xxx.xxx.xxx.xxx
SIP Status
Not Register /
Registering/ Registered
Phone No.
SIP Proxy
xxx.xxx.xxx.xxx
SIP Port
xxxxx
REGISTER
xxx.xxx.xxx.xxx
Co
nf
2.Wireless
Remarks
1.Status
Default
en
tia
Menu
id
Category
0.Information
ia
3.SIP
nt
1.Call History
1.Missed
3.Incoming
4.All Delete
1.Search
In
2.Directory
fro
2.Outgoing
No Data
(when no record)
No Data
(when no record)
No Data
(when no record)
1.Outgoing
2.Incoming
3.All
Up to 50 entries
Up to 50 entries
Up to 50 entries
1.Personal
1.Group
NE
2.Name
3.Tel Number
01.Default to
20.Group20
(alphanumeric characters)
16bytes
(32 digits)
32bytes
4.Others
1.Memory ID
001 to 500
2.Alphabet
2.ABC
3.DEF
4.GHI
5.JKL
6.MNO
7.PQRS
8.TUV
9.WXYZ
*.Other
#.All
(alphanumeric characters)
3.Company
56
16bytes
Category
Menu
Default
Remarks
2.Edit
blank
01.Default to
20.Group20
(32 digits)
(32 digits)
(32 digits)
(alphanumeric characters)
01.Disable
02.Default
03.Tone Type1
04.Tone Type2
05.Tone Type3
06.Tone Type4
07.Tone Type5
08.Tone Type6
09.Tone Type7
10.Tone Type8
11.Tone Type9
12.Tone Type10
13.Tone Type11
14.Tone Type12
15.Tone Type13
16.Download1
17.Download2
18.Download3
1.Disable
2.Default
3.Red
4.Green
5.Orange
1.Disable
2.Default
3.Pattern1
4.Pattern2
01.Default
32bytes
32bytes
32bytes
16bytes
id
blank
blank
blank
blank
02.Default
nf
Tel #1
Tel #2
Tel #3
Company Name
Ring Tone
16bytes
2.Default
Vibrator
blank
02.Default
16bytes
2.Default
16bytes
fro
NE
4.Own Number
5.All Delete
(alphanumeric characters)
01.Disable
02.Default
03.Tone Type1
04.Tone Type2
05.Tone Type3
06.Tone Type4
07.Tone Type5
08.Tone Type6
09.Tone Type7
10.Tone Type8
11.Tone Type9
12.Tone Type10
13.Tone Type11
14.Tone Type12
15.Tone Type13
16.Download1
17.Download2
18.Download3
1.Disable
2.Default
3.Red
4.Green
5.Orange
1.Disable
2.Default
3.Pattern1
4.Pattern2
Own Number
(Delete all Directory)
2.Default
nt
Name
Ring Tone
In
3.Group Setting
01.Default
02.Colleagues
03.VIPs
04.Family
05.Friends
06.Group6
07.Group7
08.Group8
09.Group9
10.Group10
11.Group11
12.Group12
13.Group13
14.Group14
15.Group15
16.Group16
17.Group17
18.Group18
19.Group19
20.Group20
ia
Co
Illumination
Illumination
Vibrator
57
2.Default
240
(alphanumeric characters)
Group
en
tia
Name
Category
Menu
3.Tool
4.Voice Mail
Default
Remarks
No Tool
No Data
(when no record)
5.Setting
3.Incoming Popup
1.Popup Mode
01.Tone Type1
en
tia
id
1.Disable
1.Disable
1.Disable
2.Red
3.Green
4.Orange
1.Allow Incoming
2.Block Incoming
3.Green
1.Disable
2.Pattern1
3.Pattern2
2.Pattern1
fro
nt
ia
4.Illumination
1.External Ring
2.Internal Ring
3.IM
4.Non-notification
5.Private Call
In
8.Headset
1.Ring Tone Sending
NE
2.Auto Response
9.Offhook Ring
01.Tone Type1
02.Tone Type2
03.Tone Type3
04.Tone Type4
05.Tone Type5
06.Tone Type6
07.Tone Type7
08.Tone Type8
09.Tone Type9
10.Tone Type10
11.Tone Type11
12.Tone Type12
13.Tone Type13
14.Download1
15.Download2
16.Download3
1.Disable
2.Enable
1.Disable
2.Enable
2.Back Light
6.Vibrator
1.External Ring
2.Internal Ring
3.IM
4.Non-notification
7.Incoming Mode
Middle
nf
2.Ring Tone
1.External Ring
2.Internal Ring
3.IM
4.Non-notification
Large
Middle
Small
Graduate
Off
Co
1.User Setting
1.Incoming Call
1.Ring Volume
1.Allow Incoming
1.Both
2.Ring-->Vib
3.Vib-->Ring
1.Both
1.Headset
2.Speaker
0.None
1.1 time
2.2 times
3.3 times
4.4 times
5.5 times
1.Disable
2.Enable
1.Headset
0.None
2.Enable
58
Menu
1.Disable
2.Enable
01.Tone Type1
02.Tone Type2
03.Tone Type3
04.Tone Type4
05.Tone Type5
06.Tone Type6
07.Tone Type7
08.Tone Type8
09.Tone Type9
10.Tone Type10
11.Tone Type11
12.Tone Type12
13.Tone Type13
14.Download1
15.Download2
16.Download3
Large
Middle
Small
1.Disable
2.Enable
1.Disable
2.Enable
1.
2.
3.
4.
5.Talk Start Vib
6.Reg. Prefix No.
3.Display
1.LCD Contrast
(Level 1 to 5)
1.Disable
blank
(5 to 30 sec)
1.Standard
2.Large
1.Japanese
2.English
(alphanumeric characters)
1.Normal
2.Reversing
5 sec
1.Standard
blank
1.Normal
10bytes
(4 digits)
(4 digits)
blank
blank
4bytes
4bytes
1.Disable
2.Enable
1.Disable
(0 to 3600 sec)
1.Disable
2.Enable
0 (Disable)
1.Disable
NE
In
2.Auto Lock
1.Outside Lock
2.PowerOff Lock
32bytes
fro
Old Password
New Password
5.Password Lock
1.Manual Lock
1.Disable
nt
4.Language
4.Change Password
Middle
ia
2.Back Light
3.Font Size
12.Tone Type12
id
4.Handover Tone
1.Disable
nf
3.Call Volume
Remarks
Co
2.Ring Tone
5.My Name
6.Display Pattern
Default
en
tia
Category
2.Talk
1.RTP Alarm
59
2.English
Menu
3.Dial Key
1.Disable
(alphanumeric characters)
(32 digits)
blank
blank
1.Alphabet Search
nf
1.Disable
2.Enable
7.Date & Time
1.Date
1.Disable
2008/ 1/ 1
Co
(YYYY/MM/DD)
2.Time
3.Time Format
(HH:MM)
1.12hours
2.12hours(AM0:00)
3.24hours
1.Disable
2.Enable
1.Disable
2.Enable
(xxx.xxx.xxx.xxx or FQDN)
GMT-12:00 / -11:00 /
-10:00 / -09:30 / -09:00 /
-08:00 / -07:00 / -06:00 /
-05:00 / -04:00 / -03:30 /
-03:00 / -02:00 / -01:00 /
+00:00 / +01:00 / +02:00 /
+03:00 / +03:30 / +04:00 /
+04:30 / +05:00 / +05:30 /
+05:45 / +06:00 / +06:30 /
+07:00 / +08:00 / +08:45 /
+09:00 / +09:30 / +10:00 /
+10:30 / +11:00 / +11:30 /
+12:00 / +12:45 / +13:00 /
+14:00
ia
4.Daylight Saving
NE
In
fro
nt
5.NTP Setting
6.NTP Server
7.Time Zone
1.System
16bytes
32bytes
id
4.Assign Dial
F1.
1.Name
F2.
2.TEL
F3.
F4.
F5.
F6.
F7.
F8.
D1.
D2.
D3.
D4.
D5.
D6.
D7.
D8.
D9.
D0.
5.Speaker Monitor
1.Disable
2.Enable
1.System
2.Speed Dial
1.Alphabet Search
2.Preset Dial
Remarks
60
2.Function Key
Default
en
tia
Category
6.Keypad Mode
1.Key Touch Tone
0: 0
1.12hours
1.Disable
1.Disable
blank
GMT+00:00
1.Directory
2.Call History
3.User Setting
4.Config
5.Certificate
6.Ring Tone1
7.Ring Tone2
8.Ring Tone3
(xxx.xxx.xxx.xxx or FQDN)
2.Download Address
3.FTP Settings
1.User ID
2.Password
3.Folder
5.Speaker Monitor
(alphanumeric characters)
(alphanumeric characters)
(alphanumeric characters)
1.Disable
2.Enable
blank
blank
blank
1.Disable
blank
32bytes
40bytes
40bytes
4bytes
1.Disable
NE
In
fro
nt
ia
Co
nf
3.Maintenance
1.Config (Need Manager Password)
Password
(4 digits)
1.Wireless
1.Profile
2.Handover List
2.SIP Settings
1.SIP Proxy
2.Register
3.RegisterPort
4.User ID
5.User Password
6.Phone No.
7.Advanced
3.Manager Password
Old Password
(4 digits)
New Password
(4 digits)
2.Check
1.Monitoring
1.QoS
1.QoS Monitor
LostPacket:
Codec:
Payload:
2.Refresh Timer
(0 to 30 sec)
2.Ping
(xxx.xxx.xxx.xxx)
2.Setting List
1.Status
Same as “0.Information”
2.Wireless
3.SIP
3.PC Port
1.Close
2.Open
4.USB Connect
1.No Entry
#.Favorites
2.No Entry
3.No Entry
4.No Entry
5.No Entry
6.No Entry
7.No Entry
8.No Entry
9.No Entry
0.No Entry
blank
Remarks
Default
en
tia
Menu
id
Category
2.Download
1.Download Files
61
blank
blank
5 sec
blank
1.Close
4bytes
4bytes
• CHARACTER CODE LIST
The following shows character code list when your phone is in edit mode.
Character Code List
4th
5th
6th
7th
”
’
10th
11th
nf
¥
ia
Co
NE
In
fro
9th
nt
[space]
8th
3rd
en
tia
2nd
id
1st
62
14.TROUBLE SHOOTING
• MESSAGE MEANINGS AND SUGGESTIONS
en
tia
The following shows the meanings and suggestions of messages that may be displayed on your phone.
Message
Meaning & Suggestion
The entered password is not correct. Enter the correct
password.
[Low Battery]
Please charge it
Battery charge level is low. Charge the battery.
[Directory]
No Input Name
You do not edit Name of Directory. Edit Name.
[Directory]
Directory is Full
The number of entries reaches the maximum. To add new
entry, delete some entries in advance.
[Handy KeyLock]
Handy KeyLock Enabled
Displayed when your phone is locked.
[Handy KeyLock]
Handy KeyLock Disabled
Displayed when your phone is unlocked.
[Password Lock]
PASSWORD Lock Enabled
Displayed when your phone is locked with password.
nt
ia
Co
nf
id
[Password]
UnAuthorized!
[Setting]
X to Y is input
NE
In
fro
Entered value is out of range. Enter the value of X to Y.
63
• TROUBLES AND SUGGESTIONS
The following shows suggestions on how to resolve MH240 operation problems. Confirm the
following before making a call:
Is power ON?
) displayed?
Symptom
en
tia
Is Antenna icon (
Is battery charged?
Suggestion
Can not see Antenna Icon (
)…
Insert the battery to your phone properly.
Charge the battery.
Unlock your phone if lock icon (
Unlock your phone if “Handy KeyLock” is displayed.
Check the receiving signal strength.
Check the battery when
Apart your phone more than 50cm from Access
Point.
When you are in area where sufficient signal can not
be obtain, move to other area.
id
nf
Communication is lost, audio
break-up occurs…
key and hold more than 2 seconds.
) is displayed.
is indicated.
Co
Can not operate keys on the
phone…
Press
ia
Can not power on the phone…
SIP server registration is uncompleted. If this
occurs, please contact your network administrator.
nt
Insert the battery to your phone properly.
Place the battery on the proper position of your
cradle.
fro
Can not sustain battery power…
Replace the battery.
Make sure that phone number of your phone. To
change the phone number, please contact your
network administrator.
When your phone is placed in courtesy mode,
cancel it. Courtesy icon ( ) appears when your
phone is in this mode.
Check ring volume and adjust except “Off”.
In
Can not make or receive a call…
NE
The phone does not ring…
64
15.SPECIFICATIONS
• TECHNICAL SPECIFICATIONS
Item
en
tia
The following shows the technical specifications of MH240.
Specifications
IEEE802.11b/g
G.711, G.729a, Payload Size: 20 to 80 ms
SIP (RFC3261), NEC Enhanced SIP
IEEE802.1x (EAP-TLS, PEAP)
WEP (64 bit / 128 bit), TKIP, AES
Monochrome LCD, 120 × 90 pixels
Call History, Directory, Speed Dial, Courtesy Mode
Ring Tone : selectable from 16 kinds
Ring Volume : selectable from 5 levels
Lithium Ion Battery, 3.7 V - 850 mAh
Talk Time : up to 3 hours
Standby Time : up to 90 hours
INPUT : AC 100 V to 120 V, 50/60 Hz, 0.3 A
OUTPUT : DC 5 V, 1 A
DC Plug : miniUSB (typeB) plug
nf
id
Wireless Interface
Codec
Control Protocol
Authentication
Encryption
LCD
Main Feature
Ringer
Operation Temperature
NE
In
fro
Operating Humidity
Dimension
Weight
Certification and
Compliance
0 to 35 °C
10 to 90 %
135.0 × 48.0 × 17.6 mm
94.36 g
CSA60950-1
FCC Part 15 Class B
RSS-210
HAC
nt
AC Adapter
ia
Co
Battery
Battery Life
65
NE
In
fro
nt
ia
Co
nf
id
en
tia
This page is for your notes.
66
16.LICENCE
en
tia
This product uses the software of GPL/LGPL, and we will inform that the customer has the right of
obtaining the source code of that software, the modification, and the re-distribution.
NE
In
fro
nt
ia
Co
nf
id
Please contact the nearest NEC service office about the method of obtaining the source code.
67
NE
In
fro
nt
ia
Co
nf
id
en
tia
This page is for your notes.
68
NE
In
fro
ia
nt
en
tia
id
nf
Co
l
en
tia
id
nf
Co
ia
nt
fro
In
NE
Manufacture:
2-3, Kandatsukasa-cho, Chiyoda-ku, Tokyo 101-8532, Japan

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Create Date                     : 2008:01:31 17:26:19+09:00
Creator Tool                    : Xelo PDFLibrary
Modify Date                     : 2008:01:31 17:41:53+09:00
Metadata Date                   : 2008:01:31 17:41:53+09:00
Producer                        : クセロPDF2 v2.10
Format                          : application/pdf
Document ID                     : uuid:03ab2d64-5e0c-4f26-ba4f-e5d306d793fd
Instance ID                     : uuid:d26e5b94-7b52-431f-829b-4d3348fdbdae
Page Count                      : 84
Creator                         : Xelo PDFLibrary

EXIF Metadata provided by EXIF.tools

NEC of America 8WV WLAN Phone User Manual 2

NEC Corporation of America WLAN Phone Users Manual 2

Contents

Users Manual 2

FCC ID Filing: UI3-8WV

Navigation menu

Namespaces

Views

Navigation