NEC of America CUL7580 Cellular/ PCS GSM and Cellular WCDMA Tablet with WLAN, Bluetooth and RFID User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1634987
Application ID	jQwmX0sQYhUFmNY/X8qPNg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	197.35kB (2466932 bits)
Date Submitted	2012-02-10 00:00:00
Date Available	2012-08-08 00:00:00
Creation Date	2017-11-01 23:46:26
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-01 23:46:26
Document Title	Users Manual
Document Creator	CubePDF

- Wi-Fi settings
in
sfiulua
Setting to Airplane mode
When Airplane mode is set, all wireless
functions of the FOMA terminal (phone calls,
packet communication, etc.) are disabled.
From the Home screen, 5 >
"Settings" } "Wireless &
networks“ b mark the “Airplane
mode“ checkbox
0 Checking "Airplane mode" also turns off the
Wi-Fi and Bluetooth functions, but tiey can be
turned on again in Airplane mode.
From the Home screen, E >
“Settings" P “Wireless &
networks“ } "Wi-Fi settings“
Select any item:
Wi-Fi~ ~ ~Turns on/off Wi—Fi.
Network notification ------ Set Whether to
notify when an open Wi—Fi network is
detected.
Wi-Fi Easy Settings —> P60
Add Wi-Fi network —- R60
0 Packet communication is still available when Wi-Fi
is turned on. However, if the FOMA terminal is
connected to a Wi-Fi network, the Wi-Fi network
takes precedence. When the Wi-Fi network is
disconnected, the FOMA terminal automatically
connects to the BG/GPRS network. if you continue
usrng the FOMA terminal connected to the 3G/
GPRS network, note that you will incur costly
packet communication charges.
I Using other Wi-Fi network functions
0 Please turn on Wi—Fi beforehand.
From the Home screen, = P
“Settings" > “Wireless &
networks“ b "Wi- Fi settings“
E > select any item:
Scan ------ A scan of Wi—Fi networks starts,
and a list of available Wi-Fi networks is
displayed.
Change priority ------ Change the priority of
Wi-Fi networks to be used. Touch and hold
the name of a network you want to change
to switch its priority.
Advanced Gateway ~~~~~~ Set a gateway.
Wi-Fi sleep policy '''''' Configure sleep Netmask '''''' Set a net mask.
settings for Wl-Fl. DNS1 ...... Set DNS 1_
Set Wi—Fl to enter sleep if no keys are —
pressed for 15 minutes after the screen DNS 2 """ SEt DNS 2“
dlms. After entering sleep, Wi—Fi
connectlon will be closed, but it Wlll Bluetooth Communication
connect to an access pomt automatically Connect the FOMA terminal and a Bluetooth—
once a screen lights. , , , compatible device via Bluetooth
You can also set the Wl'F' function not communication. You can connect a Wireless
to enter Sleep Either at any time or Earphone Set 02 (option), etc. to the FOMA
W terminal, and talk on the phone or listen to
MAC address ------ A MAC address is music while the FOMA terminal is still in your
dlsplayed. bag.
m 0 There ls no guarantee that theFOMA terminal
used is displayed. lS capable of ereless communication With all -
types of Bluetooth devices.
randdover """ Set whether to enable 0 For information about the settlngs and §
. . . .-.
an over. operation procedures, see also the instruction 5“
Proxy ------ Set Whether to use a proxy manual of the Bluetooth—compatible device. 9
Server.
Advanced settings for proxy
~ ~ Configure detailed proxy settings.
Use static IP ------ Set Whether to speclfy
static IP address for connecting with a
Wl-Fl network. If checkmarked, "IP
address", “Gateway", "Netmask",
"DNS 1 and "DNS 2" can be set. To
use a static IP address, " IP address”,
"Gateway", "Netmask“, and "DNS l "
need to be set.
IP address ------ Set an lP address.
sfiuiuas I
Precautions when using Bluetooth devices
0 Note the followmg in order to ensure a
good connection.
- Connect with another Bluetooth device
within about a lO—meter Viewable
distance. Depending on surroundings
(walls, furniture, etc.) and bUilding
structure, the connectable distance is
shorter. The connectable distance will
also be shorter if an obstacle is between
the FOMA terminal and another
Bluetooth device. Connection may be
unestablishable if your FOMA terminal
and the device are located on opposite
sides of walls containing metal rods, such
as on upper and lower storeys or in
adjoining rooms, especially in a building
made of reinforced concrete.
Also note that the above connection
distances are not guaranteed.
- Connect the FOMA terminal distanced
from other devices (electric products/AV
equipment/0A equipment, etc.) as much
as possible (since the terminal is easily
affected by a microwave oven in use,
distance the terminal as far as possible).
If the terminal is brought closer when
another device is on, it may be unable to
connect normally or may be a cause of
television and radio noise or interference
(teleVision picture may be unclear for
particular UHF or satellite channels).
- If you cannot connect normally due to a
nearby broadcasting station, wireless
transmitter, etc. change the location of
the partner Bluetooth device. You may
not be able to connect normally if
surrounding radio waves are too strong.
0 You can establish a wireless connection
while a Bluetooth device is in a bag or
pocket. However, if you body is located
between the Bluetooth device and the
FOMA terminal, decreased
communication speed or noise may
occur.
0 Bluetooth devices and wireless LAN (IEEE
802.11 b/g/n) use the same frequency
band (2.4 GHz). If you use the FOMA
terminal or Bluetooth device near a
device equipped with a Wireless LAN,
radio wave interference may occur and
can result in decreased communication
speed, noise, a poor connection, etc. If
this happens, do the following.
- Keep the FOMA terminal and a Bluetooth
device in wireless connection at least
10 m from a Wireless LAN.
- Turn off a wireless LAN when used within
10 m.
OThe radio waves emitted by a Bluetooth
device may affect operation of medical
electronics or other equipment. Since it
may be the cause of an accident
depending on Circumstances, turn off the
FOMA terminal and any nearby Bluetooth
deVices in the followmg places.
- Trains
- Airplanes
- Hospitals
- Locations near automatic doors and
emergency alert devices
- Places with ignitable gas, such as gas
stations
I Connecting to a Bluetooth device
To connect the FOMA terminal with another
Bluetooth device and exchange data, first
carry out pairing (connection setting) With
the other Bluetooth device and then connect.
0 Some Bluetooth deVices only pair, and some
Bluetooth devices proceed all the way 0
connection.
OTurn on the partner‘s Bluetooth function and
check that it is connectable beforehand.
From the Home screen, = P
“Settings" > “Wireless &
networks“ > “Bluetooth
settings"
Mark the “Bluetooth" checkbox
} “Scan for devices“
- A scan for devices starts and a list of
available Bluetooth devices is displayed.
' To let your FOMA terminal be
recognizable by the partner Bluetooth
device, tap " Discoverable".
6 Tap the Bluetooth device you
want to communicate with
0 Connection may be established with this
procedure, depending on the Bluetooth
device.
9 “Pair“ or enter the passcode (PIN)
’ "0K"
in
2.
u:
Ill
ICanceIing the Bluetooth device
connection
b Tap the Bluetooth device to disconnect
P "OK"
' To cancel pairing, touch and hold the
Bluetooth device you want to disconnect,
and tap "Disconnect" or “Disconnect &
unpair".
ISeIecting the connection type
b Touch and hold a paired Bluetooth device
P "Options..." P checkmark the
connection type
0 Only supported Bluetooth devices are
selectable.
- OWhen not using the Bluetooth function, turn off
sfiuiuas
the Bluetooth function to prevent battery
consumption.
0 If the Bluetooth device is not SCMS-T—compliant,
sound cannot be heard regardless of the audio
data type.
Advanced settings when connected to
a BLE-compatible device
You can connect to a BLE (Bluetooth Low
EnergW—compatible device (G—SHOCK, etc.)
and notify it of FOMA terminal information
(new call, new mail, etc.) or sync with the
FOMA terminal clock. Set details such as
what kinds of information are notified.
0 Connect to a BLE-compatible device
beforehand. 4 R103
From the Home screen, E }
"Settings" > "Wireless &
networks" > "Bluetooth
settings" } "Advanced settings"
Select any item:
Alert Notification ------ Set to notify you by
a BLE—compatible device of new calls, new
mail, etc.
Find Me ------ Set the beep made when you
operate a BLE-compatible device to ring the
FOMA terminal.
Proximity ------ Set the notification level or
no notification by a BLE—compatible device
when canceling its connection with the
FOMA terminal.
Time ------ Set whether to sync a BLE-
cornpatible device clock With the FOMA
terminal’s clock.
OThe followmg applications can be linked to a
BLE-compatible deVice.
' Phone
‘spE— l\“><—)i/ (Sp-mode mail)
' Email
‘Gmail
' Messaging
' Pedometer
eClock
eCalendar
Using USB tethering
Connect your FOMA terminal to a USB—
supported PC, etc. and access the Internet
using mobile network communication. Use
the microUSB cable for PC connection
(sample) to connect your FOMA terminal
and the PC or other device.
0 Connect your FOMA terminal to
a PC with the supplied microUSB
cable for PC connection
From the Home screen, = P
“Settings" > “Wireless &
networks“ b “Tethering” b
checkmark "USB tethering"
Confirm details of notices P
“0K"
IRemoving the microUSB cable for
PC connection 4 R134
OThe followlng are PC operating requlrements
(supporting OS) for USB tetherlng
-Windows XP
~Windows Vista (32-blU64-blt)
~Windows 7 (32-blt/64-blt)
.A special dnver lS required for communlcatlon
via USB tetherlng.
For detalls includlng downloading a driver, refer
to the following website.
http.//www.n-keltalcom/gurde/download/
Using Wi-Fi tethering
You can use the tethering function via Wi-Fi
connection. Using the FOMA terminal as an
access point (main deviCE), you can use a
Wi—Fi—compatible device (subdevice) to
connect to the Internet or enjoy gaming
services.
From the Home screen, = >
"Settings" > "Wireless &
networks“ b “Tethering” P
“Wi-Fi tethering settings“
9 “Configure Wi-Fi hotspot" i set
“Network SSID“, “Security", and
"Password" > “Save"
0 "Network SSID“ is set to "N-Ol D-
><><><><><><“ by default.
Checkmark “Wi-Fi tethering“ b
confirm details of notices } "OK"
Set the same network SSID and
security on the Wi-Fi-compatible
device (subdevice) as on the
FOMA terminal
0 The Wi—Fl—compatlble device (subdevice)
and the FOMA termlnal (main device)
connect.
0 Up to 5 Wl-Fl—compatlble dewces can connect at
the same tlme.
sfiumas I
OThe “Security“ setting lS "Open“ by default.
Select from "Open", "WEP", "WF’A PSK” (TKIP),
"WPAZ PSK" (AES), and "WPA/WPAZ PSK"
(TKlP/AES mixed) as necessary.
OThe channel sets automatically to one of lch,
6ch, and 11ch. Since a Wi-Fi—compatible dewce
(subdevice) may not be able to connect
depending on its settings, be sure to check
settings on any deVice you want to connect.
Connecting to a VPN (Virtual
Private Network)
A VPN (Virtual Private Network) is
technology allowing connection externally
to information on a protected local network
such as in a corporation or university. When
configuring VPN connection from your
FOMA terminal, obtain security information
from the network administrator.
0A VPN (PPTP) lS unavailable if the access mm
is set to sp-mode.
sfiuluas
IAdding a VPN
From the Home screen, 5 P
“Settings" P “Wireless &
networks" P "VPN settings'
IAdding PPTP
P "PPTP" P "Add PPTP VPN" P fo ow
the administrator’s instructions to configure
each item of the VPN setting P E P
"Save"
IAdding IPSec/LZTP
P "lPSec/LZTP" P _ P "New“ P enter
keystore password P fo low the
administrator’s instructions to configure
each item of the VPN setting P "Finish"
0 Enter any text for the keystore password.
Enter the same text the next time you
enter the keystore password.
I Connecting to a VPN
From the Home screen, = P
“Settings" P “Wireless &
networks" P "VPN settings"
IConnecting by PPTP
P "PPTP" P tap the VPN you want to
connect to P enter the required information
to connect P "Connect“
IConnecting by IPSec/LZTP
P " lPSedLZTP" P tap the VPN you want to
connect to P "Connect" P enter keystore
password
I Disconnecting from a VPN
0 Open the Notifications panel and
tap the notification for the VPN
connection
IDisconnecting PPTP
P Tap the connected VPN
IDisconnecting IPSec/L2TP
P Tap the connected VPN P "Disconnect"
> "OK"
Call Settings
Configure settings for caller reject,
network services, Internet telephoning,
etc.
From the Home screen, E >
“Settings" > “Call settings“
Select any item:
Call rejection list ~~~~~~ Displays list of
numbers that are rejected based on
"SpeCified numbers". Tap "Add phone
number” to add a number. Enter a
number directly, or tap a to add a
number from Phonebook/call log.
Network service —> R91
Roaming settings ------ Configure settings
for roaming overseas.
Power key ends call ------ Set to end calls
using the power key. During a call in sleep
mode, cancels sleep mode instead of ending
the call.
Call rejection ------ Rejects calls from
designated numbers.
Not saved in Contacts ------ Rejects calls
from callers not registered in
Phonebook.
Unknown ------ Rejects calls from callers
unable to notify their caller iD.
Payphone <<<<<< Rejects calls from pay
phones.
User unset ------ Rejects calls from callers
who do not notify their caller iD.
Specified numbers~ vRejects calls
from numbers added to the "Call
rejection list".
Advanced call settings ~~~~~~ Configure
detailed call settings.
Femtocell search ------ Search Signals in the
vicinity to connect to a femtoceli.
Accounts ~~~~~~ Set an account for Internet
calls.
Use Internet calling ------ Set method for
Internet calls.
sfiumas I
sfiuiuas I
docomo service
Configure settings such as a docomo
application password and AUTO—GPS.
From the Home screen, E >
"Settings" P "docomo service"
Select any item:
Application manager ------ Set regular
checks for updates, etc.
Wi-Fi ------ Set to use docomo serVice Via
Wi—Fi.
docomo apps password ------ Set a
password to use With docomo applications.
AUTO-GPS ------ ConfigureAUTO-GPS
function settings, etc.
Open source licenses ------ Confirm open
source licenses.
This allows you to configure various
sound settings, such as Silent mode and
ringtones.
From the Home screen, E P
“Settings" > “Sound"
Select any item:
Silent mode ‘‘‘‘‘‘ Set the FOlVIA terminal not
to emit sound, etc. for etiquette when in a
public or similar place.
- Alternatively, press the power key for
1 second or longer, and then tap "Silent
mode".
Vibrator ------ Set vibration for incoming calls.
Volume ~ ~~Set the volume for ringtones,
media playback sound, alarm sound, etc.
Phone ringtone ------ Set the ringtone.
Notification ringtone ------ Set sound for
email and other notifications.
Audible touch tones ------ Set dial pad
operation sound on/off when entering a
phone number, etc.
Audible selection~ Set operation sound
on/off when selecting from a menu.
Screen lock sounds ------ Set operation
sound on/off when locking/unlocking the
screen.
Haptic feedback '''''' Set vibration on/off for
specific screen operations.
Display
Set brightness and other screen settings
including font, key illumination, and
touch panel sensitivity.
From the Home screen, E P
“Settings" > “Display"
Select any item:
Brightness ------ Adjust the brightness of the
display. Mark the "Automatic brightness"
checkbox to detect surrounding brightness
and adjust automatically.
Auto-rotate screen ------ Set whether the
display sWitches automatically according to
the orientation of the FOMA terminal.
Animation~ ~ Set the animation to display
when the screen switches.
Screen timeout ------ Set the time until the
backlight turns off. For approx. 5 seconds
after it turns off, you can tap E a t:
to turn it back on.
Select Font ------ Set the font for displayed
text.
Touch panel Setting
Touch panel sensitivity ------ Set the
touch panel to be more senSitive to
operation.
Incoming call lamp ~~~~~~ Set the illumination
pattern and color of the notification LED for
incoming calls.
Notification lamp ~~~~~~ Se the notification
LED to flash for missed ca ls, new mail, and
new messages.
Key illumination ------ Set E Q 5 to
illuminate for an incoming call, during a call,
for new mail, etc.
Use key illumination ------ Set whether
key illumination is activated.
TimeToneSet ------ Set key illumination to
be activated at the set time.
Voice call — Charging ------ Set a key
illumination pattern for each operation.
Power ON — Osaifu-Keitai ------ Set
whether key illumination is activated for
each operation.

OWhen the battery level becomes low,
"Brightness" automatically sets to its minimum
to conserve power.

OThe notification LED sometimes flashes
regardless of the notification lamp setting,
depending on the application (Gmail, etc).
sfiumas I
sfiuluas I
eco mode
You can set eco mode to reduce power
consumption.
From the Home screen,
"Settings" P "eco mode"
Select any item:
eco mode ------ Set eco mode.
Turn off Wi-Fi ~~~~~~ Set the Wi—Fi
function oft.
Unuse GPS satellites
function ol‘f.
Set the GPS
Stop sync ------ Stop application
synchronization.
Stop live wallpapers ------ Sets a still
image as wallpaper when live wallpaper
is set.
OFF Set eco mode off.
Auto '''''' Set to "Original eco mode" or
"Full eco mode" automatically
according to the battery level set with
" Auto setting ".
Original eco mode ------ Configure eco
mode With ”Original eco mode
settings".
Full eco mode~ ~~ Set an eco mode
that keeps battery consumption to a
minimum.
Original eco mode settings ------ Configure
operation when Original eco mode is set.
Brightness ------ Dims the display.
Screen timeout ------ Set the time until
the screen back light turns off.
Stop Illumination ~~~~~~ Set key
illumination oft.
Turn off Bluetooth ------ Set the
Bluetooth function off.
Auto setting ~~~~~~ Set the battery level at
which Original eco mode or Full eco mode
turns on automatically, when eco mode is
set to "Auto'.
Advice for saving energy ------ Displays tips
for saving on battery power.
Location & Security
Configure settings such as for security
lock and obtaining location information.
From the Home screen, E >
"Settings" P "Location &
security“
Select any item:
Use wireless networks —> P.147
Use GPS satellites —> R147
Set up (Change) unlock security
------ Configure unlock security codes for
unlocking the screen, Osaifu—Keitai, etc. You
can set a pattern, lock number, or
password.
Screen lock security ------ Configure to enter
an unlock security code for unlocking the
screen.
Set up Osaifu-Keitai lock 4 P157
PIN setting —> P113
Visible passwords ~~~~~~ Set to display
characters when entering a password.
Select device administrators ------ Enable/
disable administrators for the FOMA
terminal.
Device security policy ~~~~~~ Check security
information set by a remote administrator.
You can also encrypt FOMA terminal or
microSD card data.
- If you update data from Within another
application while encrypting/decrypting
data, your FOMA terminal may no longer
function properly.
Use secure credentials ------ Permit access to
safe certificates and other credentials
information.
0 A credentials information storage
password must be set beforehand.
Install from SD card ~~~~~~ Install an encrypted
certificate from a microSD card.
Set password ------ Set a password for
credentials information storage.
Clear storage ~~~~~~ Delete all credentials
information and reset the credentials
information storage password.
sfiumas I
sfiuiuas
Setting device administrators
Set administrators for the FOMA terminal to
be enabled/disabled.
0 Before usrng Omakase Lock, you must enable
”Omakase Lock”. Omakase Lock is
unavailable as of November, 2011.
From the Home screen, El >
“Settings" > “Location &
security“ > "Select device
administrators"
Select administrators }
“Activate" / “Deactivate"
Security codes used with the FOMA
terminal
Some features of your FOMA terminal
require security codes, to make various
functions more convenient. These include a
password for locking the FOMA terminal
and a network security code for network
services. By using different codes for
different purposes, you can get the most
out of your terminal.
Precautions for all security codes
0 Avoid setting security codes using your
birthday, part of your phone number, your
address or room number, "1111" or
"1234" that can be easrly guessed by
others. Be sure to write down the security
codes and store them in a safe location.
0 Do not reveal your security codes to
others. DOCOMO is not responsible for
damage caused by misuse of your
revealed security codes by others.
0 If you forget your security codes, you
need to bring your identification
document (driver's license, etc), the
FOMA terminal and the miniUIM to a
docomo Shop Service Counter. For
details, contact "General Inquiries"
provided on the last page of this manual.
0 Your PIN unblocking key is written in the
application form (copy for subscriber)
given at the time of contract. If you have
subscribed at a place other than a
docomo Shop, bring your identification
document (driver's license, etc.) and the
miniUIM to a docomo Shop Service
Counter, or contact "General Inquiries"
provided on the last page of this manual.
I Network security code
The network security code is a 4—digit
number necessary for using the docomo
Network Services or identification at
reception of your request in docomo Shop
or at docomo Information Center. It can be
set any number at the subscription and also
changed later by yourself.
You can change your network security code
to the new one from your PC if you have a
"docomo ID/Password" for General support
site for PC “My docomo".
O For information about " My docomo”, see the
inside of the back cover of this manual.
| PIN1 code
The miniUlM has a settable security code,
PIN1 code. These codes are set to "0000"
(four zeroes) at the time of subscription, but
you may subsequently change it. A P.111
PIN1 code is a 4— to 8—digit number (code)
that is entered to confirm the user when the
miniUlM is inserted in the FOMA terminal or
the terminal power is turned on. It is
intended to prevent unauthorized use by a
third party. Entering PIN1 code makes the
FOMA terminal operable.
0 If you want to use a miniUlM that has been
used on a different FOIVIA terminal, use the
same PINI code that had been set on the
different terminal. The code is "0000" if the
default setting has not been changed.
0 If you enter the incorrect PIN1 code 3 times in
succession, the PIN1 code is locked. Unlock
usmg "PIN unblocking key".
I Enabling the miniUIM's PIN
Set to require entry of the PIN1 code when
power is turned on.
From the Home screen, 5 >
“Settings" > “Location &
security“ } “PIN setting"
9 “PIN1 code entry set"
ITo change the PIN1 code
} "Change SIM PIN“ } enter the current
PIN1 code > "OK" } enter the new PIN‘I
code > ”OK" } enterthe new PIN1 code
again > "OK"
- "PIN1 code entry set" must be enabled
beforehand.
6 Enter the PIN1 code P “0K"
I PIN unblocking key (PUK)
The PIN unblocking key (PUK) is an 8-digit
number used to unblock the PIN1 code. You
cannot change the key yourself.
0 If you enter the incorrect PIN unblocking key
10 times in succession, the miniUIM is locked.
If this happens, please contact a docomo
Shop.
sfiumas I
IUnblocking the PIN1 locked miniUIM
- When the message indicating that a SIM card
is PIN1 locked is displayed, perform the
following to unlock.
"Emergency call" P Enter "xxosse [PIN
unblocking key]*[new PINI code]*[new
PIN1 code]#“
0 For example, to change the miniUIM PIN1
code to "2580“ when the PIN unblocking key
is "88888888", enter "969605968888888896
2580*2580#”
sfiuluas I
Applications
This allows you to configure application
management settings.
From the Home screen, = >
"Settings" > "Applications"
Select any item:
Unknown sources ------ Set whether
installation of applications obtained
non—Android Market Sites, email, etc.
0 allow
rom
Manage applications ------ You can check
name, version, etc. of applications, or
force—close/delete/etc. applications.
Running services »»»»»» You can display a
service that is running to stop it, change its
settings, etc.
Storage use >>>>>> Display the state of storage
use for an application.
Battery use ------ Check the amount of
battery used for each application.
Development ~~~~~~ Configurevarious
settings required for application
development.
Accounts & Sync
You can configure accounts for online
services such as Twitter, Facebook, Google,
mixi, Microsoft® Exchange ActiveSync®, to
synchronize data as well as exchange data
between the FOMA terminal and servers for
the various services. If set to synchronize
automatically, the FOMA terminal is
automatically updated with update
information via the web.
0 Adding an account —> R62
From the Home screen, 5 >
"Settings" P "Accounts & sync"
Select any item:
Background data ------ Set whether a
applications carry out data communication
automatically.
Auto-sync ------ Set whether applications
synchronize data automatically.
0 Depending on this setting, you may incur packet
communication fees. The battery also depletes
faster compared With when the checkbox is
unmarked.
Starting synchronization manually
From the Home screen, : >
“Settings" > "Accounts 8. sync“
9 Tap the account you want to
synchronize
IDeleting an account
} Tap the account you want to delete P
"Remove account" P " Remove account"
6 E P “Sync now“
- To stop synchronization, tap
then tap “Cancel sync“.
and

oTo delete the Google account that was
configured first, data on the FOMA terminal
must be initialized. —- R116
sfiumas I
sfiuluas I
This allows you to configure backup for
Google applications reset the FOMA
terminal.
From the Home screen, E P
“Settings" > “Privacy"
Select any item:
You can check the capacity of a microSD
card or the FOMA terminal, or format a
microSD card.
From the Home screen,
“Settings" > “Storage"
Select any item:
Back up my data ------ Backup application
settings and data to the Google server.
Total space ------ Check the capaCity of a
microSD card.
Automatic restore ------ Set to restore the
backed up settings and data when
reinstalling an application.
Data transfer mode ------ Set a mode for
using "iC transfer Service'.
Factory data reset ~~~~~~ Delete all data on
the FOMA terminal and return it to its state
at time of purchase. Mark the "Erase SD
card " checkbox to delete all data on a
microSD card.
Available space ------ Check the free space
on a microSD card.
Unmount SD card/Mount SD card ------
Cancel recognition or make a microSD card
recognizable by the FOlVIA terminal so that
the microSD card can be removed safely.
Erase SD card ------ Format a microSD card.
Note that formatting erases all content on a
microSD card.
- Carry out "Unmount SD card “
beforehand.
Available space ------ Check the free space
on the FOMA terminal.
_ Language & Keyboard
You can configure the search function This allows you to change the language and
(R82). configure keyboard settings for using the
From the Home screen, E b FOMA term'm"
"Settings" > "Search" From the Home screen, E P
9 Select any item: Settings“ > Language &
- Displayed items differ with the application keyboard
set Select any item:
Google search Select language ------ Change the language
Show web suggestions ------ Display used on the FOMA terminal.
entry candidates when searching with ATOK _. R69
Google.
Mimi... ------
FOMA terminal‘s location information VOICe Input & OUtPUt m-
W‘th 6009‘9- You can features such as voice search and 513”,
Search history ~~~~~~ Set to display the the text—to—voice conversion function. g
customized search history. From the Home screen, 5 > "’
Manage search history--- --Manage “Settings" > “Voice input &
the customized search history. ..
. _ _ output
Searchable items ~~~~~~ SpeCify objects for _
data search. Select any item:
Clear shortcuts ------ Delete the history Voice recognizer settings
searched with the search box. Language . “Configure the language
settings for voice recognition.
SafeSearch ------ Configure search result
filtering.
Block offensive words »»»»»» Configure
display of inappropriate results of veice
recognition.
Text-to-speech settings
Listen to an example ~ Plays a
syntheSized voice sample.
Always use my settings - Configure
application settings to operate
according to "Default Engine", "Install
voice data', "Speech rate', and
"Language" settings.
Default Engine vvvvvv Configure the voice
syntheSizer engine settings for text
reading out.
Install voice data-- - Install entities
reqUired for the v0ice synthesizer to run.
Speech rate » » Configure the text
reading out speed.
for text reading out.
sfiuiuas I
voice synthesis engine. Japanese
support not provided.
Language - - Configure the language
Pico TTS< < Configure the installed
Accessibility
Configure user-aide applications which
react with sound or vibration when
operated.
0 Accessibility applications are not registered
at time of purchase. You must download
and install compatible applications
beforehand from Android Market or other
sites before you can set "AcceSSibility".
From the Home screen, = >
"Settings" > "Accessibility" P
"ON"
Date & Time
You can set the FOMA terminal's clock.
From the Home screen, = }
“Settings“ > "Date & time“
Select any item:
Automatic ------ Set the time to be ad'usted
automatically.
Set date ------ Set the date manually.
Select time zone »»»»»» Configure the
zone manually.
me
Set time ------ Set the time manually.
Use 24-hour format ------ Set the cloc to
12-hour display or 24-hour display.
Select date format ~~~~~~ Set the date display
format.
About Phone
You can check your FOMA terminal's
state, update software, or upgrade the
OS.
From the Home screen, E >
“Settings" > “About phone“
Select any item:
Software Update —> P.i 79
Major updates » P.i84
MEDIAS NAVI ------ Set to receive update
notifications from MEDIAS NAVI.
Status ------ Check battery level, your phone
number, etc.
Battery use ------ Check the amount of
battery used for each application.
Legal information »»»»»» Check the open
source license and Google usage
agreement.
sfiumas I
Model number~~ ~ Check your FOMA
terminal's model number.
Firmware version ------ Check the firmware
version.
Baseband version ~~~~~~ Check the baseband
version.
Kernel version ------ Check the kernel
version.
Build number ~ ~ Check the build number.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : 
Create Date                     : 2012:02:08 17:48:54+09:00
Modify Date                     : 2012:02:10 15:05:34-05:00
PXC Viewer Info                 : PDF-XChange Viewer;2.5.197.0;Jul  8 2011;20:50:13;D:20120208174959+09'00'
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : GPL Ghostscript 9.02; modified using iTextSharp 5.0.6 (c) 1T3XT BVBA
Keywords                        : 
Creator Tool                    : CubePDF
Metadata Date                   : 2012:02:10 15:05:34-05:00
Document ID                     : 3ab8b77d-548d-11e1-0000-72bfa4f9f7a1
Instance ID                     : uuid:5a4d6ffe-1e09-41ba-be63-c4a1ff09b3df
Format                          : application/pdf
Title                           : 
Creator                         : 
Description                     : 
Page Count                      : 20

EXIF Metadata provided by EXIF.tools