NEC of America FOMA-N600I Mobile Phone User Manual SEKITO Users manual

NEC Corporation of America Mobile Phone SEKITO Users manual

Users Manual

NEC
Model name: FOMA N600i
No. Date Phone File name Reviewed by
1 2005 Nov. 18
2
3
4
5
6
7
8
9
Important Safety Information 1
Start-up 5
Basic Functions 12
Main Menu 17
Reference Information 41
Repair Guideline 42
Note:
Some services/functions hereunder are not necessarily supported by all
networks, such as 112, the international emergency call number.
Please contact the network operator or service provider for clarification of
how to use specific service/function.
Please read "Safety and Performance" and "Maintenance Guideline"
chapters prior to the use of the mobile phone.
TABLE OF CONTENTS ii
Important Safety Information 1
Start-up 5
N600i Overview ..........................................................................5
Definitions of Buttons ................................................................6
Status Icons ...............................................................................8
USIM Card and Battery ...........................................................10
Charging Method ................................................................11
Basic Functions 12
On/off .......................................................................................12
PIN and PUK Codes ................................................................12
PIN and PIN2 Codes ...........................................................12
PUK Code and PUK2 Code ................................................12
Outgoing Call ...........................................................................13
Number Keys ......................................................................13
One-key dialing ...................................................................13
Fast dialing ..........................................................................13
Dial from phonebook ...........................................................13
Dial the number through call options ..................................13
Dial international call ...........................................................13
Directly dial extension number ............................................13
Emergency call ...................................................................14
Receive Calls ..........................................................................14
Reject Calls .............................................................................14
Functions in Audio Session .....................................................14
Hold .....................................................................................14
Mute ....................................................................................15
New SMS ............................................................................15
Multi-party session .............................................................15
Functions in Audio Session .....................................................16
Hold .....................................................................................16
Mute ....................................................................................16
Audio/video .........................................................................16
Zoom ...................................................................................16
Brightness ...........................................................................16
Picture quality .....................................................................16
Screen mode .......................................................................16
Main Menu 17
Settings ....................................................................................18
1. Phone ..............................................................................18
2. Phone modes ..................................................................19
3. Main-LCD ........................................................................19
4. Power-saving ..................................................................20
5. Calls ................................................................................20
6. Security ...........................................................................21
7. Network ...........................................................................21
8. Reset settings .................................................................21
9. Videophone .....................................................................21
10. Data statistic ..................................................................22
Message ..................................................................................22
1. SMS ................................................................................23
2. MMS ................................................................................24
Web browser ...........................................................................27
Activate WAP browsing webpage: ......................................27
Browse the web page ..........................................................29
Phone Book .............................................................................29
1. Lists .................................................................................29
2. Call options .....................................................................31
Camera ....................................................................................32
1. Initiate camera/shooting function ....................................32
2. Taking pictures ................................................................33
3. Shooting function options ................................................34
My Data ...................................................................................35
Java™ .....................................................................................37
Accessory ................................................................................38
SIM toolkit ................................................................................40
Reference Information 41
Input Text ............................................................................41
Repair Guideline 42
Emergency service
To mak se an emergency call in any country
• Ensure that your N600i is switched on and in service.
• Press the Send key to return to the Home screen if needed.
• Press 112 (or 999 within the UK or 000 in Australia) followed by the
Send key. (When the USIM card is not inserted or when the dial
lock function is on, press the SK2 (EMRGCY). When the dial lock
function is on, press 112 and SK1 (YES). Refer to Locking your
N600i section on page 26 for further instructions on emergency
calls when the key lock is on.)
Follow the instructions and do not end the call until told to do so.
Tell the operator which service you require: Police, Ambulance, Fire
Brigade, Coastguard or Mountain Rescue Service. Give your
location and, if possible, remain where you are to maintain contact.
The 112 emergency number service is available on every digital
network service. Alternatively, use 999 in the UK, or 000 in Australia.
Note that these can only be used with a valid USIM.
Due to the nature of the cellular system, connection to emergency
calls cannot be guaranteed.
General care
A phone contains delicate electronic circuitry, magnets and battery
systems. You should treat it with care and pay attention to the following:
• This phone is fitted with an internal battery that can only be
replaced by a qualified service engineer. There is a risk of
explosion if the battery is replaced with an incorrect battery type.
Dispose of the used battery in accordance with the manufacturer's
instructions.
• Do not allow the phone, battery or accessories to come into
contact with liquids or moisture at any time. Do not immerse in
liquid.
• Do not allow the phone, battery or accessories to come into
contact with liquids or moisture at any time. Do not immerse in
liquid.
• Do not paint the phone.
• Do not drop, throw or subject the phone to rough treatment.
• Do not place the phone alongside computer disks, credit cards,
travel cards and other magnetic media. The information contained
on disks or cards may be affected by the phone.
• Do not leave the phone or the battery in places where the
temperature could exceed 60 °C, e.g. on a car dashboard or a
window sill, behind glass in direct sunlight, etc.
• Do not remove the battery while the phone is switched on.
• Take care not to allow metal objects, such as coins or key rings to
contact or short-circuit the battery terminals.
• Do not dispose of batteries in a fire. Dispose of Li-ION batteries at
a Li-ION recycling point. For more specific battery and power
supply information, see pages 6 and 7.
• Do not put the battery in your mouth, as battery electrolytes may
be toxic if swallowed.
• Do not attempt to dismantle the phone or any of its accessories.
• Do not put a battery into a microwave oven, dryer or high-pressure
container.
• Do not let the battery come into direct contact with an electric
outlet or cigarette lighter charger. Use only authorised charger
units.
• Do not pierce the battery with a sharp object such as a needle.
Important Safety Information
Emergency services
General care
• When the battery is thrown away, be sure it is non-conducting by
applying vinyl tape to the (+) and (-) terminals.
• Do not disassemble or modify the battery.
• Do not solder the battery directly.
• Stop using the battery if you detect any abnormalities, such as
odour, discolouration or heat during use, charge or storage.
• Do not use the phone with a damaged or misshapen battery.
• In the unlikely event of a battery leak, take care to keep the battery
discharge away from your eyes or skin. If the leakage does come
into contact with the eyes or skin, please flush thoroughly in clean
water and consult a doctor.
• Remove a worn out battery immediately.
• The handset itself may become warm when the handset is used for
an extended period of time or when the video functions are used.
Also, it may become warm while the battery is being charged.
• When a phone is set to Vibration mode, the vibration can
sometimes cause your phone to move. Be careful not to place the
phone near heat sources (such as a heater) or too close to the
edge of the table.
• Use an anti-static cloth to clean the phone. Do not use an ordinary
dry cloth or electrostatically charged cloth. Do not use chemical or
abrasive cleaners as these could damage the case.
• Remember to recycle the cardboard packaging supplied with this
phone.
• Remember to make backup copies of all important data on your
phone.
• Do not leave the battery pack empty or disconnected for a long
time, otherwise some data may be initialised.
• Take care not to put your phone in your back pocket and then sit
on it. Also, do not put your phone at the bottom of a bag where it
may subject to excessive weight or pressure. Doing so may
damage the LCD and camera lens and cause them to malfunction.
• Hold the phone away from your ear when you
- Play video/music on the Multimedia Player
- Play the ringtune through the speaker.
• It may damage, or irritate your ears.
Safety
The use of mobile phones is not allowed in some radiation-sensitive
areas, such as hospitals, research centres and aircraft. Ensure that you
switch off your phone in these areas. If in doubt, remove the battery.
Aircraft Safety
Switch off your phone and remove its battery when inside or near an
aircraft. The use of phones in aircraft is illegal. It may be dangerous to
the operation of the aircraft and it may disrupt the mobile network.
Failure to observe this instruction may lead to suspension or denial of
mobile network services to the offender or legal action or both.
Do not use the phone on the ground without the permission of the
ground staff.
Hospital safety
Switch off your phone and remove its battery in areas where the use of
phones is prohibited. Follow the instructions given by the respective
medical centre regarding the use of mobile phones on their premises.
General Safety
• Observe “Turn off mobile” signs, such as those near petrol
stations, chemicals or explosives and switch off your phone.
• If you have a heart condition, be careful with the call vibration or
tone volume settings.
• Do not allow children to play with the phone, charger or batteries.
Safety
Aircraft safet
• Do not use the phone where blasting is in progress.
• The operation of some medical electronic devices, such as hearing
aids and pacemakers, may be affected if you use a mobile phone
next to them. Observe any warning signs and the manufacturer's
recommendations.
• Your phone contains metal which may cause a skin irritation, a
rash or eczema.
• You MUST exercise proper control of your vehicle at all times. Give
your full attention to driving.
• Observe all local safety regulations regarding the use of mobile
phones while driving.
• Pull off the road and park before making or answering a call.
Road Safety
• You MUST NOT stop on the hard shoulder of a motorway to
answer or make a call, except in an emergency.
• Switch off your phone at a refuelling point, such as a petrol station,
even if you are not refuelling your own car.
• Do not store or carry flammable or explosive materials in the same
compartment as a radio transmitter.
• Electronic vehicle systems, such as anti-lock brakes, speed control
and fuel injection systems are not normally affected by radio
transmissions. The manufacturer of such equipment can advise if it
is adequately shielded from radio transmissions. If you suspect
vehicle problems caused by radio transmissions, consult your
dealer and do not switch on the phone until it has been checked by
qualified approved installers.
• Check if local laws and/or regulations restrict the use of phones
while driving.
Vehicles equipped with an airbag
An airbag inflates with great force. Do not place objects, including either
installed or portable wireless equipment, in the area over the airbag or
in the airbag deployment area. If in-vehicle wireless equipment is
improperly installed and the airbag inflates, serious injury could result.
Third party aquipment
The use of third party equipment, batteries, cables or accessories, not
made or authorised by NEC, may invalidate the warranty of your phone
and also adversely affect the phone's operation.
Service
The phone, batteries and charger contain no user-serviceable parts.
We recommend that your NEC phone is serviced or repaired by an NEC
authorised service centre. Please contact 3 or NEC for advice.
Efficient use
The phone has an internal antenna. For optimum performance with
minimum power consumption, please do not cover the internal antenna
area with your hand. Covering the internal antenna affects call quality,
may cause the phone to operate at higher power levels than needed
and may shorten talk and standby times.
Radio frequency energy
Your phone is a low-power radio transmitter/receiver. When it is turned
on, it intermittently receives and transmits radio frequency (RF) energy
(radio waves). The system that handles the call controls the power level
at which the phone transmits.
Road safety
Vehicles equipped with an airbag
Third party equipment
Service
Efficient use
Radio frequency energy
y
Exposure to radio frequency energy
• The phone is designed not to exceed the limits for exposure to RF
energy set by national authorities and international health
agencies.* These limits are part of comprehensive guidelines and
establish permitted levels of radio wave exposure for the general
population. The guidelines were developed by independent
scientific organisations such as ICNIRP (International Commission
on Non-ionizing Radiation Protection) through periodic and
thorough evaluation of scientific studies. The limits include a
substantial safety margin designed to assure the safety of all
persons, regardless of age and health and to account for any
variations in measurements.
• *Examples of radio frequency exposure guidelines and standards
that the phone is designed to conform to:
• ICNIRP, Guidelines for limiting exposure to time-varying electric,
magnetic and electromagnetic fields (up to 300 GHz)-International
Commission on Non-Ionizing Radiation Protection (ICNIRP).
Health Physics, vol.74. pp, 494-522, April 1998.
• 99/519/EC, EU Council Recommendation on the limitation of
exposure of the general public to electromagnetic fields 0 Hz-300
GHz. Official Journal of the European Communities, July 12, 1999.
• ANSI/IEEE C95.1-1992. “Safety levels with respect to human
exposure to radio frequency electromagnetic fields, 3kHz to 300
GHz”. The Institute of Electrical and Electronics Engineers Inc.,
New York, 1991.
• FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal
Communications Commission (FCC), August 1996.
• Radiocommunications (Electromagnetic Radiation Human
Exposure) Standard 1999, Australian Communications Authority
(ACA), May 1999.
Copyright Notice
The video/audio recordings you make/download are protected by
copyright laws. They are for personal use only and must not be
otherwise used without the permission of the copyright owner.
Dispose of your used NEC product
In the European Union
EU-wide legislation as implemented in each
Member State requires that used electrical and
electronic products carrying the mark (left) must
be disposed of separately from normal household
waste. This includes mobile telephones or
electrical accessories, such as chargers or
headsets. When you dispose of such products,
please follow the guidance of your local authority
and/or ask the shop where you purchased the
product.
The mark on the electrical and electronic products only
applies to the current European Union Member States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside
the European Union, please contact your local authority and ask for the
correct method of disposal.
Exposure to radio frequency energy
Copyright Notice
Disposing of your used NEC product
1. Start-up
1.1N600i-Overview
LCD W176 x T220
Front camera
Receiver
Rear camera
LED
Stereo speaker
Stereo speaker
Side key
Microphone
1.2 DEFINITIONS OF BUTTONS
Left soft key (LSK) Right soft key (RSK)
Navigation keys (Up, Down, Left, Right)
Center soft key (CSK)
Power key (On hook)
Send key (Off hook)
1 2 3
4 5 6
7 8 9
0 #
*
1.2 Definitions of Buttons
OK Key
Left/RSK
keys
LSK key Idle mode: enter into the menu, hold it to decide whether to lock the N600i keyboard, press [LSK] and
"*" key to unlock the keyboard
Menu mode: Select menu or pop-up menu
Editing mode: switch over the input methods
RSK key Idle mode: enter into WAP browser
Menu mode: back to the last page
Editing mode: clear off text and characters
OK KEY Idle mode: initiate picture-taking pre-view mode
Menu mode: select menu or confirm options
Direction
key
Upper
navigation
key
Idle mode: directly enter into [Phone mode] function
Menu mode: scroll the menu upward
Down
navigation
key
Idle mode: directly enter into [my data] function
Menu mode: scroll the menu downward
Left
navigation
key
Idle mode: directly enter into [Message] function
List mode: paging Forward
Editing mode: cursor leftward
Right
navigation
key
Idle mode: directly open [Phone book] list function
List mode: paging backward
Editing mode: cursor rightward
Send key Idle mode: directly enter into [Dialed calls] function, press [RSK] could enter into [Received calls] and
[Missed calls] function circularly
Dialing and incoming-call mode: dial or receive calls
Power key Press it to hang up or cancel operations, hold to turn on/off the N600i
Letter/number key Idle mode: press it to input 0-9
Hold [number key 1] to call voice box
Hold [number key 2-9] to call the number whose caller ID is corresponding number registed in phone
Hold [number key 0] to input "+"
Menu mode: press it to enter into the corresponding menu option
* key Idle mode: press it to input "*"
# key Idle mode: press it to input "#", hold it to input suspended dialing symbol "P"
Editing mode: press it to display general symbols
1.3 STATUS ICONS
SN Meaning Simple description Icon
1.Battery status Low power
Power status
2.SMS status New short message
Un-read short message
3.MMS status New MMS
Unread MMS
.WAP prompt WAP prompt
4.USIM card full USIM short message full
MP full MP short message full
USIM& MP full USIM card and MP short message full
5.Meeting mode Display the Phone mode
Pocket mode
Car mode
Normal mode and incoming call transfer Phone mode and incoming call transfer
Meeting mode and incoming call transfer
Pocket mode and incoming call ransfer
Car mode and incoming call transfer
6.Alarm clock Initiate the alarm clock
7.Display network coverage (i.e. USIM card) types
Display 3G USIM card in 3G network
Display 2.5G SIM card in GSM network
Display 2G SIM card in GSM network
Display manual-selected network types
Display USIM card compliant with 3G and GSM manually chooses 3G network
Display USIM card compliant with 3G and GSM manually chooses GSM network
Display auto-selected network types
Display USIM card compliant with 3G and GSM automatically chooses 3G network
Display USIM card compliant with 3G and GSM automatically chooses GSM network
No auto selection of networks Display no network signals of USIM card compliant with 3G and GSM
8.PSD Package switching mode
CSD Circuit switching mode
PSD&CSD Concurrent package switching and circuit switching
9..USB connection Display USB data line connected
10.Line attach Display data connection to the network
.11.Signal display Display failure to receive network signals
. Display weak or strong signals
1.4 USIM Card and Battery
191
1 18
1.4 USIM Card and Battery
USIM card (user ID mode) incorporates MP number and service items, and can store phone numbers and personal data.
Caution: Place USIM card beyond the reach of children.
Caution: USIM card and the contact points are vulnerable to scratch or damage, please gently handle the USIM card.
Caution: Place USIM card beyond the reach of static, dust or water.
Caution: Install USIM card when powering off e353 and getting out the battery.
Caution: Please contact the network service provider for any failure of the USIM card.
Get out the battery and install the USIM card as below:
1. N600i face up, palm up to hold the N600i;
2. Push the battery back cover to the left to pop out;
3. Push the battery out with the thumb at the N600i back, get it out from the battery cabin;
4. Insert USIM card into the slot by aligning the angles of USIM card with those of the slot with the metal side facing down;
5. Insert the battery into the cabin top with the end with metal contact point upward;
6. Press the other end of the battery to insert it fully into the cabin;
7. Push the back cover to the right until fully clinched.
To Remove the USIM Card
1. Ensure that the power is off. If the power is on, press and hold the End (On/Off) key until power is off.
2. Remove the battery. (Refer to the illustration on the next page.)
3. Slide the USIM card out of the USIM card holder.
USB connection Display USB data line connected
Line attach Display data connection to the network
Signal display Display failure to receive network signals
Display weak or strong signals
1.4 USIM Card and Battery
Caution: The system environment, MP configuration and game functions can all impact the idle-mode duration.
Caution: Battery Performance and Maintenance
1. The N600i is charged by rechargeable charger.
2. Please note that the new battery can reach the best performance after two or three full charging-discharging cycles.
3. The battery can sustain hundreds of charging-discharging cycles before out of service. It is the time to replace the battery
upon
obviously shortened working time of the battery (session duration and idle time).
4. Please adopt the battery and charger approved by the N600i manufacturer to ensure the service life of N600i;
the battery equipped with the N600i is rechargeable Li-battery. Please do not connect the battery with the
charger for over a week, as over-charge will shorten its service life; the charged battery will discharge over
time when idle for long.
5. Over high or over low temperature will impair the battery charging.
6. Do not use the battery for other purposes.
7. Do not use any damaged charger or battery.
8. Do not short-circuit the battery; the backup battery in pockets or bags may touch the metal articles (coins, brooches or
pens) that
may connect the “+” pole and “-“ pole of the battery (i.e. the metal bar on the battery) and lead to short circuit, which may
damage
the battery or connections.
9. Keeping the battery in over hot or cold environment will shorten the life service or reduce the capacity of the battery; keep
the
battery in environment between 0°C and 45°C; otherwise the N600i may suspend operation even fully charged.
10. Do not throw battery into fire.
11. Please dispose of the battery as required (recycled), do not dispose of battery as living rubbish.
12. When not using the battery for a long period, remove it from the N600i and store in a place with low humidity and low
temperature.
Charging Method
When battery voltage is lower than the operating voltage, the screen will display charging prompt and empty-battery icon with
prompt tone and
information, and the N600i will automatically turn off after a while.
The N600i is equipped with the rechargeable Li-battery; please adopt original-manufacturer charger and battery to ensure the
N600i service life.
1. Carefully insert the pins of the charger to the jack at the profile of the N600i.
2. Connect the charger with the power supply when the N600i is shut off, the screen will display “charging”. In case of
charging when turning
on, the battery icon will flash with the voltage grids rising, the N600i operates normally.
3. After charging, the battery prompt icon will not flash; In case of charging when turning of, the screen will display “charging
completed”.
4. Disconnect the charger from the power supply and N600i.
5. Please adopt the charger approved by N600i manufacturer, and refer to charger manual prior to use.
2. BASIC FUNCTIONS
2. Basic Functions
Caution: The N600i supports audio and video session in 3G network, and supports only audio session in GSM network.
2.12.1 On/off
2.1 On/Off
Power on Press [Power] for 2-3 seconds to power on N600i while hearing the power-on tone and seeing power-on animation
or text. Then the
N600i will prompt you to input PIN code if applicable. It will prompt you to input the lock password if applicable. When not
inserting
USIM card, the N600i will prompt you to insert the card, but allow calling of emergency numbers.
Power off Hold [Power] for seconds until you see the power-off picture and hear the power-off tone.
2.2 PIN and PUK Codes
2.2 PIN and PUK Codes
PIN and PIN2 Codes
PIN code Avoid unauthorized use of USIM card. If initiating the power-on Pin code function, the MP will require the PIN code
when powered
on, USIM card will be automatically locked and display the lock prompt when inputting three wrong PIN codes. The PIN code
digits
are 4-8.
PIN2 code If inputting 3 wrong PIN2 codes in a row, the MP requires PUK2 code for unlocking.
PUK Code and PUK2 Code
PUK code When modifying locked PIN code, MP requires PUK code (personal unlocking code that is issued with USIM card.
Please contact
with the service provider for PUK code otherwise. In case of inputting 10 wrong PUK codes in a row, the USIM card will be
permanently locked. Users are prohibited from changing PUK code; users should contact the service provider for lost PUK
code.
PUK2 code PUK2 code is not supplied with USIM car, is needed when modifying the locked PIN2 code. If inputting 10 wrong
PUK2 codes in a
row, the user is prohibited permanently to use the menu options of PIN2 code.
2.3 OUTGOING CALL 13
Number Keys
The max number can be inputed in the idle screen is 57 digits and user can’t change to another line manually. Input phone
number in the idle screen
with number keys, then press [send key], then dial the audio call to such number; dial video call to such number by pressing
[OK].
One-key dialing
In idle mode, hold “1” to dial audio voice mail.
In idle mode, hold number keys 2-9, directly dial the numbers 2-9 stored in USIM card by audio call.
Caution: If you dial an empty number, i.e. not stored in USIM card or MP, the MP will prompt “No contact matched”.
Fast dialing
You can directly dial the numbers stored in USIM card or MP without inputting the numbers.
1. In idle mode, Input the number then press “*” key, the screen will display the phone number stored in the MP.
2. In idle mode, input the number then press "#" key, the screen will display the phone number stored in USIM card.
3. Press [send key] to dial audio call to the number; press [OK] to dial video call to such number.
Caution: If you dial an empty number, i.e. not stored in USIM card or MP, the MP will prompt failure to find such contact in
the current position.
Dial from phonebook
search for a number in the telephone book, press [send key] to dial the audio call to such number; or dial video call to the
number in the menu.
Dial the number through call options
Search for the session lists in the session options, or in idle screen, press [send key] to search for the dialed numbers, press
[send key] again to
dial audio call to such number, or dial video call to the number in the menu.
Dial international call
Add international call prefix "+" in front of the number (pressing "0" for seconds, "+" will display on the number column, then
input nation code and
telephone number, press send key for the call.
Directly dial extension number
The MP permits direct dialing of extension number or voice mail. You can insert a suspension symbol "P" between the phone
number and extension
number. In this case, the MP will suspend the dialing of extension number until the response of the receiving party. The "P"
shall be inserted as
below:
1. In general dialing practice, input the telephone exchange number, then hold "#" key to input "P", then extension number.
2.3 Outgoing Call
Caution: If you dial an empty number, i.e. not stored in USIM card or MP, the MP will prompt failure to find such contact in
the current position.
14 BASIC FUNCTIONS > RECEIVE CALLS
2. Then press "send key" to dial the number, MP will automatically dial the extension number when connected with the
telephone
exchange.
Emergency call
Your service provider configures your MP with one or more than one emergency numbers (e.g. 112). In the service coverage
area, the users can input the emergency number, and then press the send key to call emergency numbers even without the
USIM card.
Caution: The function entails the network support.
2.4 Receive Calls
The MP will ring or vibrate when incoming calls, answer calls by pressing [OK] and [send key], [LSK] is mute and cancel the
vibration function. If configured any-key answer function, you can press any key other than [RSK], [LSK] and [Power] to
answer calls. The received numbers are stored in the received number calls.
Caution: If you have inserted the earphoneHandset Connector, you can press the button on it to answer incoming calls,
when the keys of the MP can still normally operate.
2.5 Reject Calls
Press [RSK] and [Power] to reject incoming calls.
In case of having not received incoming calls, the icon of the non-received calls will display on the screen.
2.6 Functions in Audio Session
Caution: The function depends on the support of network service provider and whether you have registered the function.
In the session, you can conduct many operations. In the session, press [LSK] to enter into the session menu, including
Hold, Mute, New SMS,
enter phonebook etc.
Hold
During the session, press [LSK] to enter into in-session menu to keep the call by pressing "Hold", when you can dial another
number. Press LSK key
and select "switch-over", the current call is sustained and the Hold call becomes the current call; you can talk with either party
of the two, but only one
party can hear you.
5
Mute
During the session, press [LSK] to enter into in-session menu; in case of suspension of the mike, select "Mute" when the
other party cannot hear
you; to restore the session, press [LSK] and select "turn off silent tone".
New SMS
In one call, two calls or telephone conference, press [LSK] to enter into the in-session menu, select new SMS, and conduct
relevant operations; you
can edit it or make selections in the phone book.
Hand-free session
In the session, press [OK] for hand-free session.
Multi-party session
Caution: The function depends on the support of network service provider and whether you have registered the function.
The function can connect with the current session and maintained session to hold multi-party session. In the
session, all parties can hear the talking party. You can add or separate the parties based on needs.
1. Multi-party conference
Please follow the steps below for multi-party conference:
1. Dial the number of one party;
2. Dial the number of another party, see the provisions of "Functions in Session";
3. Press "LSK key" to select "Conference"; you can conduct multi-party session with the current session and maintained
session. To dial
more numbers to add the parties; receive incoming calls in the session while maintaining the multi-party session; press "LSK
key" to
select "telephone conference", you can conduct the new multi-party session with the added numbers and maintained
numbers.
4. The maximum parties are 6. It bases on the network operator service.
2. Isolate multi-session parties
1. Press "LSK key" to select "isolation";
2. Select the number or numbers to be isolated (name or number);
3. Press "LSK key" to select "Split", then return to the session status;
4. You can then talk with the isolated party (maintain the session with other parties), then disconnect the number, then
conduct multi-party
session with the maintained parties (or hold on the isolated number, press "LSK key" to select "add" to conduct multi-party
session.)
2.7 Functions in Audio Session
Hand-free Session
Caution: Video phone session is only available in 3G network.
In the session, press [OK] to realise hand-free function, or press "LSK key" to enter into the in-session menu to select the
hand-free option.
Front camera/Rear camera
The MP supports dual lens; in the session, press "LSK key" to enter into the in-session menu to select "Front camera" or
"Rear camera" for video
session.
Hold
During the session, press [LSK] to enter into the in-session menu to select "Hold", the maintained party will not hear your
audio or video data.
Mute
During the session, press [LSK] to enter into in-session menu to select "Mute" to shut off the mike, or press [LSK] to select
"shut off silent tone" to
restore session.
Audio/video
During the session, you can send video or static pictures; press [LSK] to enter into in-session menu, select "Use photo
instead" to send static picture
to the other party; select "Use video instead" to make video session.
Zoom
During the session, press [LSK] to enter into in-session menu; select "Zoom" to define lens focus levels 1, 2 and 4.
Brightness
During the session, press [LSK] to enter into in-session menu; select "Brightness" for brightness levels +2, +1, 0, -1 and -2.
Picture quality
During the session, press [LSK] to enter into in-session menu; select "picture quality" to configure quality levels as Normal,
FineSuper and fine.
Screen mode
During the session, press [LSK] to enter into in-session menu; select "screen mode" to configure screen modes as "My side is
smaller", "My side is
larger", "Other side only" or "My side only".
2.7 Functions in Audio Session
3. MAIN MENU 17
Press [LSK] in the idle screen.
In the main menu, select the 9 options by [direction navigation key]:
3. Main Menu _
_ _ _
3.1 SETTINGS
Press [direction navigation key] to switch over the sub-menus, then press [OK] or relevant number key for confirmation.
The default configuration of your MP will enable to use the functions immediately after inserting USIM card. For more needs
and application modes,
this MP allows you to define and change the setting for your habits to meet senior communication needs.
1. In the idle screen, press [LSK] to enter into the menu.
2. Press [direction navigation key] to scroll to [1.settings], then press [OK] for confirmation (or press [number key1]).
The system settings menu includes:
1. Phone
2. Phone modes
3. Main-LCD
4. Power-saving
5. Calls
6. Security
7. Network
8. Reset settings
9. Videophone
0. Data statistic
Each setting covers multiple setting items allowing selecting or inputting setting values, which create the automatic control of
the MP.
1. Phone
MP settings make setting based on the MP service status, including Ring setting, Answer option, Clock, language setting.
1. Ring: the option window provides Voice call ring, Video call ring, Message ring, Volume, Alert tone, to be selected by [up
and down
navigation key].
2. Answer options: configure whether to respond to incoming calls by any key.
3. Clock: Configure time and date and the formats by [up and down navigation key]. Press [OK] to determine the
modification contents.
- Set time: allows input of correct time;
Note: 1. If the wallpaper is calendar, banner won't be disapplyed.
2. [9. SIM toolkit] display will vary with USIM cards.
3.1 Settings
9
- Set date: allows input of correct date;
- Set time format: adjust the date display format in12/24-hour system;
- Set date format: adjust the date display formats of 6.
4. Language: Configure the current menu and prompt language as English and Japanese..
2. Phone modes
1. Select mode
In the scene mode screen, enter into [select mode], select an option among Normal Mode, Meeting Mode, Pocket Mode or
Car Mode. Then the
MP will follow the selected mode in operation.
2. Normal mode
In the scene mode screen, select the desired working mode, then configure the parameters as per your personal taste,
including the following setting
items:
- Ring volume: adjust the tone volume
- Keypad volume: "press key volume" can adjust the volume of key pressing;
- Earpiece volume: "headphone volume" can adjust the headphone volume in dialogue, or adjust it by direction navigation
key in
session;
- Message volume: adjust the information prompt volume;
- Ringtones: select voice calls, video calls and message;
- Vibration pattern: 3 types, or "shut off vibration";
- Other settings: select key tone, coverage tone and auto answer.
3. Main-LCD
Display screen setting covers Greetings, wall paper, color style and idle banner.
- Greetings: screen display upon power on; including no greeting, text and animation, "text" option allows user editing in the
editing
screen.
- Wall paper: select the favorite pictures from the pictures stored in the MP, camera pictures and download pictures, as the
background
paper; to configure the background paper, enter into the picture base to select the favorite.
- Color style: 3 color keynotes, to be selected by [up and down navigation key].
- Idle banner: display on the idle screen; you can edit it by text editing window.
Note: Meeting mode, Pocket mode, Car mode setting items is the same as Normal mode.
20
4. Power-saving
Power-saving mode: Include two items, i.e. backlight setting, backlight timer.
- Backlight setting: setting of backlight brightness, high, middle and low levels.
- Backlight timer: setting of backlight duration.
5. Calls
1. Call divert
A network function for forwarding the call to designated phone as requested by the user.
Upon the setting, MP requires you to input the designated number to receive the call. If failing to receive the transferred call,
please check the
destination number.
- Divert always: with the setting, all incoming calls will be transferred to designated number.
- On busy: with setting, the incoming calls will be transferred to designated number when MP is busy.
- No reply: with this setting, the incoming calls will be transferred to designated number when MP does not respond.
- Unrechable: with this setting, the incoming calls will be transferred to designated number when MP upon failure of
connection (e.g.
poor network signal or poor signaling environment).
- Cancel all: with this setting, the transfer setting will be cancelled.
2. Call waiting
Whether to permit call waiting; shut off this function, the calling party will hear busy tone when the other party is busy.
3. Auto redial
Whether to permit re-dial; if shutting off this function, MP will not re-dial in case of connection failure.
4. Call barring
You can configure the following call prohibitions to help enhance the safety; the network operator provides a 4-digit password
to you for prohibiting
calls.
- All outgoing: prohibit all outgoing calls.
- Int'l call: prohibit international call.
- Int'l EXPHome: prohibit dialing of local number when overseas roaming.
- All incoming: prohibit all incoming calls.
- In. at aborad: prohibit all incoming calls upon roaming.
- Cancel all: cancel all restrictions when inputting restriction password.
- Change password: first input the existing code, then the new codes twice.
5. Caller ID
Restrict the calling number display, including 3 items, i.e. hide number and send number.
21
6. Security
Safety setting can configure and modify passwords and options to prevent non-authorized use of MP and restriction of MP
use, including initiating
PIN code, modifying PIN code, power-on locking, modifying MP lock password, present locking and FDN.
- PIN activate: With PIN code function, input the PIN code upon power on. In case of inputting three wrong PIN codes in a row,
the
USIM card will be automatically locked and display the locking information.Initial PIN code is 0000.
- Change PINs: modify PIN code, PIN2 code. PIN code can prevent unauthorized use of USIM card. Generally, PIN2 code is
not
provided with USIM card, as it provides special network service.
- Power on lock: With the power-on locking function, input the password when powering on.
- Change security code: first input the existing code, then the new codes twice.
- Phone lock: lock MP to prevent MP data disclosure; use the MP by inputting password. Initial phone lock code is 1234.
- FDN: initiate FDN fixed number dialing.
7. Network
The menu has 4 options, i.e. select mode, new searching, priority network and access networks order.
1. Search type:
- Automatic: Upon power-on, MP will register to the first service network in the network sequence list, and will attempt the
next upon
any failure.
- Manual: first retrieve all networks and recognise the registration icons of each network; then select one network for
registration, MP
will automatically register into the next network upon failure.
2. New search
Retrieve all networks and recognise the registration icons of each network; then select one network for registration.
3. Preferred network
In the network list, you can operate the listed networks; select "priority network" in the "network service", enter into the priority
network display to
display priority network list, you may browse through the network details, insert new priority network to the end of the list;
meanwhile you can delete
the priority network from the list.
4. Acquisition order
Provide the selection of network access orders, including WCDMA/GSM, GSM/WCDMA, WCDMA only and GSM only.
8. Reset settings
Select the option, you can restore the MP settings to ex-work setting.
9. Videophone
During the video session, you can configure the communication needs, including camera setting, video call option and video
call service.
22
1. Camera settings:
Setting of camera parameters in video session.
- Screen mode: setting of the screen display in video session, including my side is smaller, my side is larger, Other side only,
my side
only.
- Picture quality: configure the display speed of the picture, including Standard, Better picture, Faster movement.
- Camera mode: setting of camera display mode, including default, sepia and night.
2. Video call options:
Setting of picture display, including video settings and show timer.
- Video settings: setting of live video or photo video.
- Show timer: setting of the time display.
3. Video call service:
Setting of call services, including voice if no video, ignore video calls.
10. Data statistic
The setting and display of network parameters, you can edit your own network access parameters.
In the interface of data statistic display, you can search for the last access flux count and total flux count. Clear off all
connection flux count by
pressing [LSK].
In the interface of editing data connection mode, you can configure 16 modes each corresponding to a set of parameters.
- Name: Display the name of the data connection mode.
- APN: cmwap for country Mobile.
- IP address: IP address provided by operator.
- Primary DNS: input primary DNS server address
- Secondary DNS: input secondary DNS server address
- Security: Set the security for network, include None, PAP and CHAP;
In the interface of Select active data profile, you can select profile of MMS, JAVA or Web browser application. For each
application, you can select
one of the 5 modes for network access services.
3.2 Message
In "Message" application, you can create, send, receive, browse, edit and sort "short message" and "MMS".
3.2 Message
1. SMS
1. Create and send short message
1. In "SMS" screen, press [LSK] to enter into the new interface.
2. In the new short message interface, select "add receivers" to input new numbers, press [down navigation key] to select
from the
phone book list; select "short message content" to enter into the text editing interface and input short message contents.
3. In the new short message interface, press [LSK] to pop up the menu, press [up and down navigation key] to select
[send] or
[save].
[send]-the MP will send out the short message to the number.
[save]-store the message into the "draft box" list.
4. The MP allows selection of more than one contact in the number list; each contact can select [Mobile number], [home
number],
[office number], then return to the contact list interface.
2. Read SMS
In idle mode, press [LSK] to directly enter into "short message" sub-menu; select [1 Inbox], [2 Outbox], [3 Sent], [4 Drafts]
menu, enter into the
message list; press [up and down navigation key] for scrolling list inquiry. Press [OK] to read the message and relevant
information, such as
receiving number and sending number, date and time.
- Inbox: store the received messages.
In the message list, press [LSK] for pop-up menu to execute the operation below:
Read: See details of the messages not sent out yet.
Delete: delete the messages from receiving box.
Delete all: delete all messages in the receiving box.
- Outbox: store messages failing to be sent out.
In the message list, press [LSK] pop-up menu for operations below:
Read: examine the details of messages not sent out yet.
Delete: delete selected messages from the sending box.
Delete all: Delete all messages form the sending box.
- Sent: store the sent messages.
In the message list, press [LSK] pop-up menu for operation below:
Read: read details of sent messages.
Delete: delete selected messages from the receiving box.
Delete all: delete all sent messages.
- Drafts: store messages for future use.
In the message list, press [LSK] pop-up menu for operation below:
24
Edit: edit message details in the draft box.
Delete: delete selected messages from the draft box.
Delete all: delete all messages from the draft box.
3. Voice mail
By "voice mailbox" function, you may forward the incoming calls to the voice mail center, and the calling party can leave a
message in the mailbox,
when you will receive the notice message. The service provider can provide such number to you, and you can configure and
modify the number.
4. Settings
Short message setting, including short message service center, short message valid term, status report, storage type,
community broadcast,
templates.
- Service center: the number is provided by MP service provider. Once you key in a short message service center number,
the number
will be displayed on the screen; you can modify or delete the number; you shall first key in the number with such option prior to
sending short message.
- Expire period: setting of message validity term to determine the stay duration in the message center prior to deletion, e.g. 1
hour,
6 hours, 1 day, 3 days, 1 week and the maximum.
- Status report: activate or deactivate report function; when activated, the network will notify you the message sending status.
- Storage type: select short message storage type: USIM card and Phone; if you select USIM card storage, the short
message will be
automatically stored to USIM card.
- Broadcast: the function of group broadcasting through MP service network; activate the function in "option" menu; in
"channel" menu,
press [LSK] to create, edit or delete the channel number.
- Canned message: the examples of some SM sentences for reference and editing.
5. Memory status:
Display free room you can store and total roomage in SIM and Phone.
2. MMS
The MMS may include text, picture and audio clips. The received or sent MMS shall not exceed 300k, otherwise the MP will
reject the mail. Upon
incoming new mail, the MMS center will send the notice message to you, and you can decide on receiving or rejecting it.
1. Create Message
1. In Message Type Select, select "Videomessage" and "SMIL Message".
2. In the new Videomessage interface, select "add contact" to input new number or email box, Press [up and down navigation
key] to
switch over among "subject", "attention", "cc", "attachment", options; select "Sub" to enter into the text edit interface, input
mail
subject.
MESSAGE < MAIN MENU 25
3. In the new MMS Message interface, select "add contact" to input new number or email box, Press [up and down navigation
key] to
switch over among "subject", "attention", "cc", "attachment", "new SMIL" options; select "Sub" to enter into the text edit
interface, input
mail subject; select "Create SMIL" for content editing.
4. In the new Videomessage and MMS Message interface, press [LSK] pop-up menu, press [up and down navigation key]
to select
[Edit], [Send], [Save], [Send Option].
[Edit] - Add receiver upon vacancy; otherwise, enter into the receiver list to search for or edit all contact numbers.
[Send] - The MP will send out the SMIL to the input number or email box.
[Save] - Store the message to " Drafts" list.
[Send Option] -Configure Message Priority, Delivery Report, Deliver Time.
In the "Create SMIL" editing interface, you can insert picture, tone and text.You can edit slide timing. Press [LSK] pop-up
menu, Press
[up and down navigation key] to switch over among the following options:
[Remove]: remove picture, tone, or text,
[Add Slide]: add new frame.
[Insert Slide]: insert a frame between two.
[Delete Slide]: delete a frame.
[Preview Slide]: pre-view the frame.
[Preview]: pre-view all contents and effect of the SMIL.
[Slide Options]: Configure Image Timing, Sound Timing, Text Timing, Image Fit Mode.
5. It may take longer to send a SMIL than a short message. Upon sending failure, the SMIL well be stored in "Inbox" for
attempt of resending.
2. Read MMS
1. In idle mode, press [LSK] to enter into the menu list, select "message" option; select [2 MMS], enter into the menu list;
press [up and
down navigation key] to scroll the list for inquiry, press [OK] for function options.
2. Inbox: store the notices or the received MMS.
In the message list, press [LSK] pop-up menu for operation below:
Open: read details of received notices or MMS.
Reply: automatically add the sender number or mailbox address to the receiver column in the MMS editing interface.
Reply all: automatically add the sender or receiver number or mailbox address to the receiver column in the MMS editing
interface.
Forward: forward the MMS to other parties.
Move: move the notices and MMS
Delete: delete the selected notices or MMS from Inbox.
Delete All: delete all notices and MMS in the Inbox.
Sort: queue the notices and MMS as requested
Filter View: extraction of specified message
26
- Outbox: store MMS failing sending.
In the message list, press [LSK] pop-up menu for operation below:
Edit: re-edit MMS content.
Delete: delete selected MMS from the Outbox.
Delete All: delete all MMS in the Outbox.
Sort: queue MMS as requested
Filter View: extraction of specified message
- Drafts: store MMS not sent or save.
In the message list, press [LSK] pop-up menu for operation below:
Edit: re-edit MMS content.
Delete: delete selected MMS from the Drafts.
All delete: delete all MMS in the Drafts.
Sort: queue the MMS as requested.
Filter View: extraction of specified message
- Sent : store MMS successfully sent out.
In the message list, press [LSK] pop-up menu for operation below:
Open: read the sent messages.
Edit: re-edit MMS content.
Delete: delete selected MMS from the sending box.
Delete All: delete all sent SMILs.
Sort: queue the MMS as requested.
Filter View: extraction of specified message
- My folders: store the notices or the received MMS.
In the message list, press [LSK] pop-up menu for operation below:
Open: read details of received notices or MMS.
Reply: automatically add the sender number or mailbox address to the receiver column in the MMS editing interface.
Reply All: automatically add the sender or receiver number or mailbox address to the receiver column in the MMS editing
interface.
Forward: forward the MMS to other parties.
Move: move the notices and MMS
Delete: delete the selected notices or MMS from Inbox.
Delete All: delete all notices and MMS in the Inbox.
Sort: queue the notices and MMS as requested
Filter View: extraction of specified message
27
3. Select a SMIL in inbox or Userbox to display details, e.g. size and subject.
Press [LSK] pop-up menu, select "Show" to play the details of the SMIL, including the text, picture and voice.
4. Settings Configure General Settings, MMS Settings, Reset Settings.
- General Settings: configure Scrolling, Heading text, Signaure setting, Quote indicator.
- MMS Settings: receive options, Send reports, Validity, Delivery Time, Server URL, Proxy Server.
- Reset Settings: reset settings.
3.3 WEB BROWSER
You shall follow the steps below prior to using WAP functions:
1. Apply for WAP services; contact your network service provider for specifics of WAP services.
2. Make necessary WAP setting on your MP by referring to the data statistic setting or proxy.
Activate WAP browsing webpage:
1. In the idle screen, press [RSK] to enter into WAP home page.
2. In the idle screen, press [LSK] to enter into the menu, press [direction navigation key] to scroll to [Web browse], then
press [OK]
for confirmation (or directly press [number key 3]) to enter into WAP application.
3. You can expediently access Internet by home page. The home page provides home page URL and correct name, the home
page is
default as "MONTERNET".
1. History
Display the address list of web pages lately browsed.when the cursor is in a web page, select the menu in the interface to pop
up the options below:
1. Go To: display the web page.
2. Delete: delete the web page.
3. Delete all: delete all web pages.
4. Show Address: display the web page address.
2. Bookmark List
The bookmark can store interested websites, and can be configured freely for easy memorization. When the cursor is in a
web page, select the menu
in the interface to pop up the options below:
1. Go to: display the web page.
2. Edit: edit the title and address of the web page.
3.3 Web browser
3. Delete: delete the web page.
4. Delete all: delete all web pages.
5. Show Address: display the web page address.
3. Page Memo List
Store web pages browsed and stored; when the cursor is in a web page, select the menu in the interface to pop up the options
below:
1. Show: display the web page.
2. Edit Title: edit the title of the web page.
3. Delete: delete the web page other than the protected page.
4. Delete All: delete all web pages.
5. Show Address: display the web page address.
6. Protect On/Off: configure whether to activate protection; in case the protected pages exceed the maximum setting, you
shall not
configure protection.
7. Unprotect All: cancel all protection setting of pages.
4. Push Messages
Store received Push messages, and can browse them.
5. Options
1. Home page: edit address and configure home page address.
2. View: configure view format, script text, animation, picture and table.
3. Proxy: configure the use of proxy and proxy server address; input IP address in the proxy server address, input port or
select
HTTP1.1.
4. Cache: configure caching types and clear off the cache.
5. Cookies: Cookies refer to the trivial information from the server to store your access to WAP websites. If you agree to
receive
Cookies, the server will inquire about your use of WAP website, interested contents and desired contents.
Cookie Mode: select one from 3 options, i.e. Accept All, Reject All and Prompt.
Delete All: delete all Cookies.
6. Certificates: display certificate information
7. Push Sttings: select whether to receive Push messages.
8. AutoDetectLang: automatically recognize languages, European languages or Chinese.
9. Browsing mode: select display browser mode
0. Show all display: display all configured information.
Reset: restore initial setting.
About browser: display browser version.
29
8. Exit
Exit the browser.
Browse the web page
Initiate WAP to browse web pages, the caption column in the window will display the title of the web page, the right/LSK keys
in the screen will
prompt the operations, the contents are displayed in the middle and the underlined text refers to the super linkage. Press
[LSK] for pop-up menu,
press [direction navigation key] to scroll among functions of "1 Home", "2 Go to Webpage", "3 Hitory", "4 Add Bookmark", "5
Bookmark List", "6
Savev Page", "7 Page Memo List", "8 Push Messages", "8 Show Properties", "0 Save Image", " Reload", "Text Size", "
Encoding", " Options" and "
Exit"
3.4 PHONE BOOK
The phone book contains list and session options.
1.In the idle screen, press right navigation key to the list menu.
2.In the menu mode, press [direction navigation key] to scroll to [4 phone book], then press [OK] for confirmation (or directly
press [number
key 4]).
1. Lists
The list records the information of contacts, including names, number, mobile number and etc; input the contact information
for calling and sending
short messages.
You can store the phone book or the names to the MP storage (internal phone book) or USIM card (USIM phone book). The
internal phone book
(MP) can store 500 items of numbers, and USIM card storage capacity varies with the types.
From the list, enter "Complete", "USIM", "Phone", "SDN", "FDN", "Own number" applications.
1. Contact list
Complete: display all contacts stored in the USIM card and MP.
Press [direction navigation key] to select contact items by up/down scrolling or paging, then confirm by pressing [OK],
display detailed information
of the contact; press [Dial key] to dial the contact; select [LSK] for pop-up menu; press [direction navigation key] for
scrolling selection of
searching, creation, audio session, video session, delete, copy, delete all, copy all, delete multiple items, copy multiple items,
group, storage status
and other items.
3.4 Phone Book
USIM: display the contact list stored in USIM card.
Press [direction navigation key] to select contact items by up/down scrolling or paging, then confirm by pressing [OK],
display
detailed information of the contact; press [Dial key] to dial the contact; select [LSK] for pop-up menu; press [direction
navigation key] for scrolling selection of searching, creation, audio session, video session, delete, copy, delete all, copy all,
delete multiple items, copy multiple items, group, storage status and other items.
Phone: display contact list stored in the MP.
30
1. Find by
In "contact items" screen, select [LSK] to pop up the menu, press [direction navigation key] for scrolling selection of
"searching".
You may select:
- Name: input key characters in the input window, search for the numbers of designated character string in the contact name
list;
- Number: input key numbers in the input window, search for the numbers of designated character string in the contact name
list;
- Memo: input key characters in the input window, search for the numbers of designated character string in the contact name
list;
- USIM location: input designated numbers in the input window, search for the contact of designated position from all
contacts stored in
USIM card;
- Phone location: input designated numbers in the input window, search for the contact of designated position from all
contacts stored
in MP;
- Group: select a group, search for all contact records of the group.
2. Add
In the "new contact" window, first select the new records to be stored in USIM card/Phone, and then enter into new contact
screen.
- If USIM card: input name, a number and position.
- If Phone: input name, group, MP/home numbers, office number, email, memo, portrait and position.
Input name and mailbox, enter into the text editing window; input other phone numbers, enter into the number-input window,
select the
group to enter into the group names list window and then press [OK]. If you do not select group when creating record, you will
be
divided into the ordinary group. Enter into [my data] [picture] list to edit and pre-view the head portrait.
3. Voice call
Dial the selected number for voice session.
Press [direction navigation key] to select contact items by up/down scrolling or paging, then confirm by pressing [OK],
display
detailed information of the contact; press [Dial key] to dial the contact; select [LSK] for pop-up menu; press [direction
navigation key] for scrolling selection of searching, creation, audio session, video session, delete, copy, delete all, copy all,
delete multiple items, copy multiple items, group, storage status and other items.
SDN: service dialing number. The number stored in the directory is provided by your network service provider. It will
call the service provider for such service. The number is preset in the USIM card, please contact your network
service provider.
FDN: fixed number dialing. The function means that you can dial the numbers stored in the FDN list; with FDN function
on, you can only dial the numbers in FDN list and emergency numbers.
Own number: for user setting of local number stored in USIM card, input two names and numbers.
31
4. Video call
Dial the selected number for video session.
5. Delete (Delete/Delete all/Multi-Delete)
Delete one, more than one or all contact records.
6. Copy (copy/copy all/Multi- Copy)
Copy one or more than one or all contact records from USIM card to MP or from MP to USIM card.
7. Group
You can divide the contacts stored in the MP into groups, such as "general", "business" or "family". This MP pre-sets 6 fixed
contact
groups and 2 defined groups.
8. Memory status
The MP is equipped with memory status inquiry function to enable you to understand the operation status of the MP. The
storage
status inquiry primarily covers recording capacity in USIM card, MP, FDN, SDN and the used capacity.
9. Function menu of contact details
In contact list, select the highlighted item, the screen will display detailed contact information; select [LSK] for pop-up menu,
press
[direction navigation key] to select:
- Edit: edit all items.
- Voice call: audio dial the selected number.
- Video call: video dial the selected number.
- Send SMS: send short message to selected numbers.
- Send MMS: send SMIL to selected numbers.
- Delete: delete undesired numbers.
- Copy: copy to USIM/MP.
2. Own number
Local number stores user numbers; automatically into the number input window, you can edit and modify the numbers.
2. Call options
The session record records the latest rejected number, received number, dialed number and session duration, and can delete
records.
The session record has 2 contents, call history and and total calls duration. In call history content, there are 3 contents, dialed
calls, received calls
and missed calls.
To operate the selected number in inquiry, press [LSK] for pop-up menu to execute the functions like save, send SMS, send
MMS, voice call,
video call, delete, delete all or press [OK] for detailed information.
32
- Read detailed information can enable you to read the detailed information about the record, including name, number, time,
date,
session duration.
- Save: store desired contents to the phone book.
- Send SMS: send short message to selected numbers.
- Send MMS: send MMS to selected number.
- Voice call: audio dial selected number.
- Video call: video dial selected number.
- Delete: delete undesired contents.
- Delete all: delete all contents in the contact list.
3.5 Camera
You can take pictures or film of those around you, which can be automatically stored in "my data". The pictures can be sent to
others by MMS. You
can use the picture as the wall paper, or configure the picture as the head portrait of certain contact in the phone book. The
picture and film are
stored in Jpeg and 3GP format.
1. Initiate camera/shooting function
1. In idle screen, press [OK] for taking pictures.
2. In idle screen, press [LSK] to enter into the menu, the cursor-lined option is [camera], then press [OK] to confirm (or
directly press
[number key 5]), enter into camera menu interface, press [OK] to initiate camera function.
3. In the idle screen, hold [OK] (over 2 seconds) to initiate video recorder function.
3.5 Camera
CAMERA < MAIN MENU 33
2. Taking pictures
Initiate camera function, enter into the view frame as shown in figure 1.
- In the camera view-finding screen, adjust camera position to display the object on the screen.
- Keep the lens fixed, then press [OK].
1. Zoom
In view-finding screen, press [up and down navigation key] to adjust focus.
2. Adjust brightness
In view-finding screen, press [left/right navigation key] to adjust brightness.
3. Camera function options
Prior to taking pictures
In view-finding screen, press [LSK] to pop up the menu, then press required key for desired options.
Front camera: when the view frame adopts front lens/back lens, the item in the menu display back lens/front lens; when
selecting
the item, return to the view frame interface, which displays the view of back lens/front lens.
Video mode: initiate video recorder function
Zoom: setting of focus adjustment levels, i.e. x1, x2 and x4;
Figure 1
Photo size: setting of picture sizes, i.e. VGA (640×480), CFI (352×288), wall paper (176×180), QCIF (176×144), CLI
(120×120),
SubQCIF(128×96).
Quality: levels, 3 Normal, Fine, and Super fine.
White balance: automatic, sunny, cloudy or indoors.
Filtering: setting of the display style, i.e. Normal, Sepia and Monochrome.
Shutter sound: No. 1, No. 2 and No. 3 tones (in conference mode, the tone will ring upon taking pictures or shooting)
Brightness: 5 levels, i.e. +2, +1, 0, -1, -2.
Shutter mode: setting of camera mode, i.e. normal, continuous, frame and self shutter
Continuous: 2, 4, or 6.
Frame: in the modification option, press [up/down direction key] to browse all frames, press [OK] to select desired frame.
Self shutter: take self pictures, configure time, i.e. 5 seconds, 10 seconds and 15 seconds.
End of taking pictures
After taking pictures, press [LSK] to store; enter into the storage interface, input the picture name, the system will provide a
default
name.
You can also send your pictures out by pressing [OK] to enter into name editing interface, input the name, press [OK] to store
the
picture, and then press [my data] to enter into MMS sending interface to send out the picture.
3. Shooting function options
Shooting a film
In the view frame screen, press [LSK] for pop-up menu, then press relevant keys for desired options.
1. Front camera: when the view frame adopts front lens/back lens, the item in the menu display back lens/front lens; when
selecting the
item, return to the view frame interface, which displays the view of back lens/front lens.
2. Photo mode: initiate shooting function
3. Zoom: setting of focus adjustment levels, i.e. x1, x2 and x4;
4. Video size: setting of picture sizes, i.e. QCIF (176×144) and SubQCIF (128×96).
5. Quality: 3 levels, normal, fine and super fine.
6. White balance: auto, sunny, cloudy or indoors.
7. Video time: configure the longest time, i.e. 10 seconds, 30 seconds and 60 seconds.
35
In the view frame screen, shoot the film by pressing [OK] as shown in figure 2 below.
End of shooting
After taking pictures, press [OK] to store; enter into the storage interface, input the picture name, the system will provide a
default name.
You can also send your pictures out by pressing [LSK] to enter into name editing interface, input the name, press [OK] to
store the picture, and then
press [my data] to enter into SMIL sending interface to send out the picture.
3.6 My Data
In My Data menu, you can play sound, display pictures or short film or downloaded pictures, seethe pictures or animations
downloaded or from
MMS. The MP can store 300 tones, pictures or film clips.
1. In the idle screen, press [LSK] to enter into the menu, press [direction navigation key] to scroll to [My Data], then press
[OK] for
confirmation.(or directly pressing [number key 6]).In the idle screen, press [Down navigation key] to directly enter into My
Data interface.
1. Movies
The clip stores the film clips; press [LSK] in the film list screen for options below:
View: pre-view the film by pressing [OK] to suspend it and then press [OK] for pre-view.
Send by MMS: send the film out in the form of SMIL.
Rename: rename the film.
Sort by: queue the films as per name, size or date.
3.6 My Data
Delete: delete current files.
Delete all: delete all files.
Property: display file name, size, date and time etc.
Listing: setting of the list display manner, name or picture.
2. Pictures
Press [LSK] to select the options below. For embedded pictures, some options below are gray.
View: pre-view the pictures.
Send by MMS: send the picture out in the form of MMS.
Rename: rename the picture.
Sort by: queue the pictures as per names, sizes and dates.
Delete: delete current files.
Delete all: delete all files.
Property: display file name, size, date and time.
Listing: setting of the list display manner, name or sketch.
3. Sound
Press [LSK] to select the options below.
Play: play the file.
Send by MMS: send the sound out in the form of SMIL.
Rename: rename the sound.
Sort by: queue the sounds as per names, sizes and dates.
Delete: delete current files.
Delete all: delete all files.
Set voice call ring: configure current sound as the voice call tone.
Set video call ring: configure current sound as the video call tone.
Set message tone: configure the sound as message tone.
Property: display file name, size, date and time etc.
4. Others
Store the text downloaded and from MMS.
5. Memory status
You can review the storage status, including pictures, videos, sound and other films storage capacity, total capacity and
remaining
capacity.
3.7 Java TM
You can download Java program from the website, and operate it on your MP.
1. In the idle screen, press [LSK] to enter into the menu.
2. Press [direction navigation key] to scroll to [Java™], then press [OK] for confirmation (or directly press [number key 7]).
Display Java
application list in your MP, you can press [up and down navigation key] to display all application programs. (In the idle
screen, hold [RLK]
(over 2 seconds) to display Java application list)
1. Execute Java program
In Java program list interface, when the desired application program is highlighted, press [OK] to operate the Java program.
2. Update Java program
In Java program list interface, press [LSK] for pop-up menu, select Update to update the current Java program.
3. Delete, Select Delete Java program
In Java program list interface, press [LSK] for pop-up menu, select Delete to delete the highlighted Java program.
4. Delete all Java programs
In Java program list interface, press [LSK] for pop-up menu, select Delete All to delete all downloaded Java programs.
5. Create, Delete and Rename user-defined Folder
In Java program list interface, press [LSK] for pop-up menu, select Create Folder to create the user-defined Folder in the root
directory, or delete/rename the Folder.
6. Move, Move All to the Folder
In Java program list interface, press [LSK] for pop-up menu, select Move to Folder to move the highlighted Java program to
designated Folder.
7. Sort
In Java program list interface, press [LSK] for pop-up menu, select Sort to sort all Java programs in the order below:
- Name< Alphabetical order> (backward or forward)
- Date<Creation time> (backward or forward)
- Size (backward or forward)
- Exc Time<Operating time> (backward or forward)
- Exc Count<Operating count> (backward or forward)
8. Attribute
In Java program list interface, press [LSK] for pop-up menu, select Attribute to review Java program information.
3
9. Permission
In Java program list interface, press [LSK] for pop-up menu, select Permission to review the Permission of the program
operating,
you can modify the Permission.
10.Proxy setting
In Java program list interface, press [LSK] for pop-up menu, select Proxy setting to review the Proxy setting screen.
You can configure the use of proxy and proxy server address for Java Application Manager and Java Application; input IP
address in
the proxy server address, input port.
11.System information
In Java program list interface, press [LSK] for pop-up menu, select System Information to review JV-Lite2 system information,
including version, size, occupied storage capacity and remaining capacity
3.8 Accessaory.
There are some common applications in the attachment.
1. In the idle screen, press [LSK] to enter into the menu.
2. Press [direction navigation key] to scroll to [Attachment], then press [OK] for confirmation (or directly press [number key
8]).
3. If the MP is power off, it's noneffective when alarm or schedule time is arriving.
1. Alarm Clock
1. In "Attachment" list, select "clock alarm", display 3 alarm clock lists.
2. Select one alarm clock for specific setting.
- Set time: set alarm ring time.
- Period: input alarm clock time.- Cycle setting: select [once /everyday/weekly].
- Ring: change the prompt tone of alarm clock.
- Rename: change the name of alarm clock.
- Status: activate or deactivate alarm clock. Above operations also apply to setting of "alarm clock 2" and "alarm clock 3".
Caution: After downloading Java application program, be sure to review the contents in application program list to confirm
the successful download. Otherwise, the downloaded Java program may be lost.
3.8 Accessory
Caution: The above function is available when MP is on, otherwise the alarm clock will not operate.
39
2. Schedule
1. In "Accessory" list, press [direction navigation key] to scroll to "schedule", then press [OK] for confirmation to schedule and
record the
planned affairs. At the scheduled time, your MP will send out prompt tone to notify you.
2. In calendar, display current date; press [direction navigation key] to move the icon to select desired dates, the caption
column
provides the calendar year and month of the current date. The date of scheduled event will be displayed in red (others in
blue).
3. When selecting a day, press [ok] to see the arrangement; if no arrangement, it will display "list is empty".
4. In the calendar interface, press [LSK] pop-up menu, press [direction navigation key] to scroll to "Create", then press [OK] for
confirmation, display new screen.
-Date: input scheduled date.
-Time: setting of scheduled prompt time.
-Memo: in the text input interface, input the event of the created schedule.
-Ring: setting of prompt tone.
-Repeat: select [once, daily, weekly, monthly].
-Status: activate or deactivate the schedule.
5. In the calendar screen, press [LSK] pop-up menu, press [direction navigation key] to scroll to "select date", then press [OK]
for
confirmation, the screen plays a date selection block, you can edit dates and inquire about the schedule.
6. In the calendar screen, press [LSK] pop-up menu, press [direction navigation key] to scroll to "schedule list", then press
[OK] for
confirmation, display the schedules of all dates, you can view, edit or delete in the same steps of "new schedule".
7. At the scheduled prompt date, the MP will play the event tone (if configured) and the prompt picture; browse the schedule,
the content
will scroll out.
3. Calculator
1. In "Accessory" list, press [direction navigation key] to scroll to "calculator", then press [OK] for confirmation, enter into
the calculator
screen for simple arithmetic.
2. You can directly input the numbers for calculation, press [direction navigation key] to switch over the calculation rules.
3. Press [OK] to display calculation result, press [LSK] to clear off.
4. Press [RSK] to exit to "attachment" screen.
4. Currency exchange
1. In "Accessory" list, press [direction navigation key] to scroll to "currency exchange", then press [OK] for confirmation,
exchange the
given amount of currency into the currencies of other nations or regions.
2. Press [direction navigation key] to enter into the list, select "exchange currency", "target currency", then select "exchange
rate" and
"amount".
3. The screen will display result.
4. Press [RSK] to exit to "Currency exchange" screen.
5. PC Tool
PC Tool is a convenience function for user. It can transfer data in phonebook or other rings and pictures that user prefer by
data line which is a
special accessory.
Steps to use it:
1. If you want to use it, firstly, you should setup drive and synchronization software for it in your computer. Windows95,
Windows98,
WindowsNT and Windows2000 operating systems are all OK.
2. Secondly, enter the main menu in MP, then choose accessory and set data transfer function on.
3. Thirdly, connect your computer and your MP with PC Tool data line.
Note: If it doesn't include PC Tool data line when you buy it, you can order it from provider.
3.9 SIM toolkit
4.
4. Reference Information
Input Text
The MP provides many kinds of expedient text input methods matching other functions, including T9 English, T9 Japanese,
ABC, 123 number input methods.
- English/ Japanese input: press [LSK] to switch over the input methods, select "T9 English". In English imagination mode,
input the
letters by the keyboard, one screen displays one English word, press [Upper navigation key] to display the last word, press
[Down
navigation key] to display the next word; press [OK] for confirmation, the word will be displayed on the cursor of the input
column.
Press [* key] to switch over the input methods, select "abc", "Abc" or "ABC". "T9 Japanese" shares identical input methods
with "T9
English".
- Letter input: press [LSK] to switch over the input methods, select "ABC", input letters by number keys on the keyboard;
press keys to
input the letters, the letters or numbers will display on the cursor of the input column Press [* key] to switch over the input
methods,
select "abc", "Abc" or "ABC".
- Number input: press [LSK] to switch over the input methods, select "123", input the numbers by [number key] on the
keyboard.
- Symbol input: in the text input screen, press [# key] to enter into the symbol input mode, select more symbols by [upper
navigation
key] or [down navigation key], input the symbols by corresponding [number key] or [OK].
4. Reference Information
_
_
5.Repair Guideline
You are welcome to use the MP produced by NEC. In case of any problem of N600i MP in use, please contact the distributor
or NEC repair center. In
case of repair, please send your MP to local repair station (see the Warranty Certificate attached with MP); in case of no
repair station locally, please
send your MP and duplicate invoice to the distributor for EMS.
To inquire about the latest repair outlet and replacement center address, please contact 800-820-7007, or
http://www.necmobile.com
5. Repair Guideline
Common problems Potential causes Solution
1. Weak signals Far away from base station or strong
insulation
Get near the windows or corridors.
2. The screen will display "no card" or
"invalid card"
Possibly dirty contact pad of USIM card Gently clean the contact pad of USIM
card.
3. Backlight constantly light Possibly configured power-on backlight Re-configure backlight mode
4. Battery charged full holds short Possibly configured power-on backlight,
to consume high electricity
Re-configure backlight mode
5. Silent headphone Possibly configured minimum volume Adjust the volume by up/down volume
key
6. Only vibration no ring upon incoming
call
Possibly configure the MP as
Conference Mode
Re-configure "standard mode"
7. No billing function (AoC) No such service of domestic network at
present
Contact network service provider
8. Fail to access WAP network Possibly wrong WAP setting Reset WAP Connection setting in
Phone settings, or contact network
service provider

Navigation menu