NEC of America KMP6J1BJ Single-Band PCS GSM Phone w/ Bluetooth Transmitter User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	558793
Application ID	CX6ziVVWGmRuBE+cprtcww==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	177.02kB (2212762 bits)
Date Submitted	2005-07-05 00:00:00
Date Available	2005-08-19 00:00:00
Creation Date	2005-05-16 15:59:59
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-07-05 16:11:21
Document Title	Manual.book
Document Creator	FrameMaker 7.0
Document Author:	k-kojima

N500i_BT_v1.0_English_master
Software version: None
Personalization version: None
Emergency Services and Safety
Precautions
Emergency Services
To make an emergency call in any country
☛
Press 1 1 2
Ask the operator for the service which you require: Police, Ambulance, Fire Brigade,
Coastguard or Mountain Rescue Services. Give your position and, if possible, remain
stationary to maintain phone contact.
The 112 emergency number service is available on every digital network service. The
number 999 is an alternative emergency number for the UK only, and can only be used
with a valid SIM card.
2 Due to the nature of the cellular system, the success of emergency calls
cannot be guaranteed.
General Care
A cellphone contains delicate electronic circuitry, magnets, and battery systems. You
should treat it with care and give particular attention to the following points.
• Do not allow the phone or its accessories to come into contact with liquid or moisture
at any time.
• Do not place anything in the folded phone.
• Do not expose your phone to extreme high or low temperatures.
• Do not expose your phone to naked flame, cigars or cigarettes.
• Do not paint your phone.
• Do not drop or subject your phone to rough treatment.
• Do not place the phone alongside computer disks, credit cards, travel cards and other
magnetic media. The information contained on disks or cards may be affected by the
phone.
• Do not leave the phone or the battery in places where the temperature could exceed
60°C; e.g. on a car dashboard or on a window sill, behind glass in direct sunlight, etc.
• Do not remove the phone’s battery while the phone is switched on.
• Take care not to allow metal objects, such as coins or key rings, to contact or shortcircuit the battery terminals.
• Do not dispose of battery packs in a fire. Your phone's Li-ion batteries may be safely
disposed of at Li-ion recycling points. For more specific battery and power supply
information, see page 3.
• Do not put your phone's battery in your mouth as battery electrolytes may be toxic if
swallowed.
• Do not attempt to dismantle the phone or any of its accessories.
• This equipment is fitted with an internal battery that can only be replaced by a qualified
service engineer. There is a risk of explosion if the battery is replaced by an incorrect
type. Dispose of the used battery in accordance with the manufacturer's instructions.
• Using any battery pack, AC adapter or Vehicle power adapter (option) not specified by
the manufacturer for use with this phone creates a potential safety hazard.
• The earpiece may become warm during normal use and the unit itself may become
warm during charging.
• Use a damp or anti-static cloth to clean the phone. Do NOT use a dry cloth or
electrostatically charged cloth. Do not use chemical or abrasive cleaners as these
could damage the case.
• Remember to recycle: the cardboard packaging supplied with this phone is ideal for
recycling.
• Do not leave the battery pack empty or disconnected for a long time, otherwise some
data may be initialized.
• Your phone contains metal which may cause you an itch, a rash or eczema depending
on your constitution or physical condition.
• Take care not to put your phone in the back pocket of your trousers or skirt and then
sit on it. Also, do not put your phone at the bottom of bag where it may subject to
excessive weight or pressure.
Doing so may damage the LCD and camera lens and cause them malfunction.
• Take care not to hold the Light too close to your or other people’s eyes when the Light
is lit.
• Do not aim or direct the InfraRed (IR) data port towards your or other people’s eyes
when using the IR data exchange.
• The foam covers the earpiece of the headset. Do not put any other part of the headset
in your ears.
Aircraft Safety
• Switch off your phone and remove its battery when inside or near aircraft. The use of
cellphones in aircraft is illegal. It may be dangerous to the operation of the aircraft and
it may disrupt the cellular network. Failure to observe this instruction may lead to
suspension or denial of cellphone service to the offender, or legal action, or both.
• Do not use your phone on the ground without the permission of the ground crew.
Hospital Safety
• Switch off your phone in areas where the use of cellphones is prohibited. Follow the
instructions given by the respective medical facility regarding the use of cellphones on
their premises.
General Safety
• Observe ‘Turn off 2-way radio’ signs, such as those near stores of fuel, chemicals or
explosives.
• Do not allow children to play with the phone, charger or batteries.
• Small parts are included in your phone. Keep them out of reach of small children, for
whom it could be a choking hazard.
• The operation of some medical electronic devices, such as hearing aids and
pacemakers, may be affected if a cellphone is used next to them. Observe any warning
signs and manufacturer's recommendations.
• If you have a weak heart, you should take extra precautions when setting functions
such as the Vibrator and Ringer volume functions for incoming calls.
• If you set the Vibrator setting to anything other than OFF, be careful that the phone is
not near a source of heat (e.g. a heater) and that it does not fall from a desk due to the
vibration.
Road Safety
• You MUST exercise proper control of your vehicle at all times. Give full attention to
driving.
• Observe all the recommendations contained in your local traffic safety documentation.
• Pull off the road and park before making or answering a call if driving conditions so
require.
Emergency Services and Safety Precautions i
• You MUST NOT stop on the hard shoulder of a motorway to answer or make a call,
except in an emergency.
• Switch off your phone at a refuelling point, such as a petrol station, even if you are not
refuelling your own car.
• Do not store or carry flammable or explosive materials in the same compartment where
a radio transmitter, such as a cellphone, is placed.
• Electronic vehicle systems, such as anti-lock brakes, speed control and fuel injection
systems are not normally affected by radio transmissions. The manufacturer of such
equipment can advise if it is adequately shielded from radio transmissions. If you
suspect vehicle problems caused by radio transmissions, consult your dealer and do
not switch on your phone until it has been checked by qualified approved installers.
Vehicles Equipped with an Air Bag
An air bag inflates with great force. Do not place objects, including either installed or
portable wireless equipment, in the area over the air bag or in the air bag deployment
area. If in-vehicle wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
Third Party Equipment
The use of third party equipment, cables or accessories, not made or authorized by NEC,
may invalidate the warranty of your cellphone and also adversely affect the phone’s
operation. For example use only the NEC mains cable supplied with the AC charger.
Service
The cellphone, batteries and charger contain no user-serviceable parts. We recommend
that your NEC cellphone is serviced or repaired by an NEC authorized service centre.
Please contact your Service Provider or NEC for advice.
Non-Ionizing Radiations
The radio equipment shall be connected to the antenna via a non-radiating cable (e.g.
coax).
The antenna shall be mounted in a position such that no part of the human body will
normally rest close to any part of the antenna unless there is an intervening metallic
screen, for example, the metallic roof.
Use only an antenna that has been specifically designed for your phone. Use of
unauthorized antennas, modifications or attachments could damage your phone and
may violate the appropriate regulations, causing loss of performance and radio
frequency (RF) energy above the recommended limits.
Efficient Use
For optimum performance with minimum power consumption, note the following:
• Your phone has the internal antenna. Do not cover part of the internal antenna of the
phone with your hands. This affects call quality, may cause the phone to operate at a
higher power level than needed and may shorten talk and standby times.
Radio Frequency Energy
Your phone is a low-power radio transmitter and receiver. When it is turned on, it
intermittently receives and transmits radio frequency (RF) energy (radio waves). The
system that handles the call controls the power level at which the phone transmits.
Exposure to Radio Frequency Energy
Your phone is designed not to exceed the limits for exposure to RF energy set by
national authorities and international health agencies. * These limits are part of
comprehensive guidelines and establish permitted levels of radio wave exposure for the
general population. The guidelines were developed by independent scientific
organizations such as ICNIRP (International Commission on Non-Ionizing Radiation
Protection) through periodic and thorough evaluation of scientific studies. The limits
ii
Emergency Services and Safety Precautions
include a substantial safety margin designed to assure the safety of all persons,
regardless of age and health, and to account for any variations in measurements.
* Examples of radio frequency exposure guidelines and standards that your phone is
designed to conform to:
• ICNIRP, “Guidelines for limiting exposure to time-varying electric, magnetic, and
electromagnetic fields (up to 300 G Hz)-International Commission on Non-Ionizing
Radiation Protection (ICNIRP)”.
Health Physics, vol. 74. pp, 494-522, April 1998.
• 99/519/EC Council Recommendation on the limitation of exposure to the general
public to electromagnetic fields 0 Hz-300 GHz, Official Journal of the European
Communities, July 12,1999.
• ANSI/IEEE C95.1-1992. “Safety levels with respect to human exposure to radio
frequency electromagnetic fields, 3kHz to 300 GHz”. The Institute of Electrical and
Electronics Engineers Inc., New York, 1991.
• FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal Communications
Commission (FCC), August 1996.
• Radio communications (Electromagnetic Radiation Human Exposure) Standard 1999,
Australian Communications Authority (ACA), May 1999.
Declaration of Conformity
• This product complies with the requirements of the R&TTE Directive 1999/5/EC. The
‘Declaration of Conformity’ leaflet can be found within this box.
Disposing of your used NEC product
•In the European Union
EU-wide legislation as implemented in each Member State requires
that used electrical and electronic products carrying the mark (left)
must be disposed of separately from normal household waste. This
includes mobile telephones or electrical accessories, such as
chargers or headsets. When you dispose of such products, please
follow the guidance of your local authority and/or ask the shop where
you purchased the product. The mark on the electrical and electronic
products only applies to the current European Union Member States.
•Outside the European Union
If you wish to dispose of used electrical and electronic products
outside the European Union, please contact your local authority and
ask for the correct method of disposal.
Licenses
• T9® Text Input and the T9 logo are registered trademarks of Tegic Communication.
“T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,187,480, 5,818,437, 5,945,928, 5,953,541, 6,011,554, 6,286,064,
6,307,548, 6,307,549, and 6,636,162, 6,646,573; Australian Pat. Nos. 727539,
746674, and 747901; Canadian Pat. Nos. 1,331,057, 2,302,595, and 2,227,904; Japan
Pat. No. 3532780, 3492981; United Kingdom Pat. No. 2238414B; Hong Kong
Standard Pat. No. HK1010924; Republic of Singapore Pat. No. 51383, 66959, and
71979; European. Pat. Nos. 0 842 463 (96927260.8), 1 010 057 (98903671.0), 1 018
069 (98950708.2); Republic of Korea Pat. Nos. KR201211B1 and KR226206B1.
People’s Republic of China Pat. Application Nos. 98802801.8, 98809472.X and
96196739.0; Mexico Pat. No. 208141; Russian Federation Pat. No. 2206118; and
additional patents are pending worldwide”
• USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4
VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO
(A) DATA OR INFORMATION ENCODED BY A CONSUMER FOR PERSONAL AND
NON-COMMERCIAL USE WITHOUT REMUNERATION; (B) DATA OR
INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A
CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii)
FOR PERSONAL USE ONLY; AND (C) OTHER USES SPECIFICALLY AND
SEPARATELY LICENSED BY MPEG LA, L.L.C.
• Helvetica is a registered Trademark of Heidelberger Druckmaschinen AG which may
be registered in certain jurisdictions.
• ©2002 Music Airport Inc., http://www.music-airport.com/
• Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc in the U.S. and other countries.
• This product contains ACCESS Co., LTD’s Compact NetFront™ Plus internet browser
software.
Copyright © 1998-2005 ACCESS CO., LTD.
Compact NetFront™ is a registered trademark or trademark of ACCESS CO., LTD in
Japan and selected countries worldwide.
• This product contains ACCESS CO., LTD’s JV-Lite2™ Java virtual machine software.
Copyright © 2000-2005 ACCESS CO., LTD.
JV-Lite2™ is a registered trade mark or trademark of ACCESS COl, LTD, in Japan and
selected countries world wide.
• Copyright 2005 Aplix Corporation and eSOL Co., Ltd. All Rights Reserved.
• This Mobile Printing Ready product is designed to provide easy printing from mobile
phones. This product follows Mobile Imaging and Printing Consortium (MIPC)
guidelines version 1.0 for PictBridge.
• The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by NEC is under license. Other trademarks and trade names are
those of their respective owners.
• This product contains ACCESS CO., LTD's IrFront® Infrared communication software.
Copyright ©1996-2005 ACCESS CO.,LTD.
• i-mode and i-mode logos are trademarks or registered trademarks of NTT DoCoMo.
For the purpose of improvement, the specifications for this product and its accessories
are subject to complete or partial change without prior notice.
Emergency Services and Safety Precautions iii
KMP6J1BJ1 SAR/DoC
Radio Frequency (RF) Signals(900/1800MHz)
THIS NEC PHONE (MODEL KMP6J1BJ1) COMPLIES WITH THE EU REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for
exposure to radio-frequency (RF) energy, which SAR* value , when tested for compliance against the
standard was (TBD)W/kg.
While there may be differences between the SAR* levels of various phones and
at various positions, they all meet*** the EU requirements for RF exposure.
*The exposure standard for mobile phones employs a unit of measurement known as the Specific
Absorption Rate, or SAR.
**The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten
grams of tissue, recommended by The Council of the European Union. The limit incorporates a substantial
margin of safety to give additional protection for the public and to account for any variations in
measurements.
*** Tests for SAR have been conducted using standard operating positions with the phone transmitting at its
highest certified power level in all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can be well below the maximum
value. This is because the phone is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a base station antenna, the lower the power
output.
Radio Frequency (RF) Signals(1900MHz)
THIS NEC PHONE (MODEL KMP6J1BJ1) COMPLIES WITH THE USA REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone contains a radio transmitter and receiver. Your NEC phone is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the U. S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government- adopted requirement for safe exposure. The tests
are performed on position and locations (for example, at the ear and worn on the body) as required by FCC
for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at
the ear is (TBD) W/ kg, and when worn on the body, is (TBD) W/ kg. (Body- worn measurements differ
among phone models, depending upon available accessories and FCC requirements). While there may be
differences between the SAR levels of various phones and at various positions, they all meet the government
requirement.
* In the United States, the SAR limit for wireless mobile phones used by the public is 1.6 watts/ kg (W/ kg)
averaged over one gram of tissue. SAR values may vary depending upon national reporting requirements
and the network band.
Body- worn Operation
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is
on file with the FCC and can be found under the Display Grant section at http:// www. fcc. gov/ oet/ fccid
after search on A98-KMP6J1BJ.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used
with a NEC accessory designated for this product or when used with an accessory that contains no metal and
that positions the handset a minimum of 1.5 cm from the body.
Before You Start
User’s manual conventions
The instructions in this user’s manual make use of the shortcuts selection except special cases.
The following markers are used throughout the user’s manual to attract your attention:
/ This type of paragraph will contain details of where to find information related to the topic in question.
2 This type of paragraph will contain information worth noting.
, This type of paragraph will contain important information.
☛ This type of description will contain procedures to operate your phone.
Menu shortcuts selection
The alternative shortcuts method of selection lets you jump straight to a menu or function without highlighting an icon and scrolling through the
intermediate menu options. The selection is made by pressing numbers which relate to the displayed menu options.
2 The instructions in this user’s manual make use of the shortcuts selection, except in special cases.
Reading the titles
Some titles in this manual contain information on how to access the functions. In these titles, M stands for
, the numbers indicate the menu shortcut
numbers (see “Overview of menu function” on page xi for details) and ... (three periods) indicate that there are more operations described in the
paragraph.
Reading the procedures
▼
▼
“Highlight” means to use the four way navigation keys (▲▼
) to move the area emphasized with different colouring.
“Select” means to highlight an item and then press .
Procedures are written omitting the verb “press”, except in some special cases.
For example,
1 2 means to:
☛ Start from the standby screen ➔ Press
to display the Main menu screen
☛ Press 1 to display the Settings screen ➔ Press 2 to display the Phone modes screen
Simple procedures are connected by arrows (➔).
Check box/Radio button
A check box enables/disables an option out of a set of options, and multiple check boxes can be selected at the same time. On the other hand, selecting
a radio button automatically cancels the previous selection, so only one radio button can be selected at one time.
A check box/radio button option can be selected/cancelled by highlighting it and pressing .
iv Before You Start
Display information
Menu title
Help area
This area contains help
information appropriate
for the current screen
(e.g. key presses
remaining when
composing a message). SK1/SK2
This area contains context
sensitive descriptions of the
Softkeys’ functions appropriate
for the current screen.
Status bar area
This area contains icons
which indicate the battery
strength, new SMS/MMS
message(s), signal
strength, etc. (see page viii).
On screens other than the
standby screen, the clock
display is placed in this
area.
Shortcut number
Press the appropriate number to
jump straight to a next menu.
The row colour is changed when
selected (e.g. to activate/
deactivate a facility).
Help icons
Displayed when you can use the
key represented by these icons
(see page viii).
Shortcut
menu number
The current
menu number
is displayed.
Page scroll bar
Displayed when
you can press ▼
to scroll to the
next page.
Next menu icon
Displayed when
you can press
or the shortcut
number to show
the next menu.
▼
Desktop icon area
This area contains the
automatically displayed
and the manually created
desktop icons. They
provide shortcuts to
certain items/functions.
, The Liquid Crystal Displays (LCD) on your phone are manufactured using high-precision technology. Even so, the LCD may contain pixels
(dots) that fail to light or that remain permanently lit. Note that this is normal and does not indicate a problem with your display.
Before You Start
Parts and functions
Speaker
Earpiece
2nd-LCD
Main-LCD
LED & light
Through-hole
for straps
4 way navigation key
(▲▼
Internal antenna
Side up key
Side down key
Softkey1(SK1)
Menu (
) key
Clear (CLR)/Back key
Send (
) key
Softkey2(SK2)
Select key ( )
Phonebook (
)key
End/on-off (
Earphone
jack cover
) key
Alphanumeric keys
Mouthpiece
Charger connector cover
, Be careful not to put your finger or foreign objects in the hinge of the phone when your phone is opened.
vi Before You Start
Camera
Rear cover
for battery
Keypad shortcuts
The following operations are available from the standby screen.
Key
Operation that involves pressing a key
xi
Operation that involves pressing and holding a key
See
page
20
43
SK1
Accessing the Mail screen
43
Accessing the Inbox screen
SK2
Accessing the i-mode menu screen
39
Accessing the Java™ applications screen
67
Accessing the Phonebook list screen
48
Accessing the Message screen
27
▲
Accessing the Phone modes screen
21
Setting the phone to Meeting mode/Returning to the previous mode
21
▼
Accessing the My data screen
60
Accessing the voice recall
▼
Setting/Cancelling the Side key lock
Accessing the received calls list
11
–
–
▼
Accessing the Main menu screen
See
page
Accessing the missed calls list
11
–
–
CLR
Accessing the dialled calls list
11
Highlighting a desktop icon
19
–
–
Accessing the homepage
40
Ending a call or returning to the standby screen
–
Powering off
Cancelling the Cell Broadcast message display
33
Deleting all the automatically displayed desktop icons
18
Deleting character or returning to the previous screen
–
Deleting all characters when you enter text
–
Entering phone numbers
Calling the Voice mail centre
54
2 to 9
Entering phone numbers
One-touch dial to the corresponding number in the phonebook(SIM)
Entering phone numbers
Entering + when you make an international call
14
Entering #
Entering a pause
–
Entering
Switching the ALS line 1/2 (if the SIM card supports ALS)
20
Accessing the camera view finder screen
55
Turning on the light
(To turn it off, press any key or open/close your phone.)
–
Side up
Accessing the volume control screen when your phone is open
(Use ▲ ▼, Side keys or 0 to 9 keys to adjust the volume.)
20
Activating the ring silencer function when you receive a call
20
Accessing the volume control screen when your phone is open
Side down (Use ▲ ▼, Side keys or 0 to 9 keys to adjust the volume.)
Activating the ring silencer function when you receive a call
20
20
Before You Start vii
LCD and displayed icons
Main-LCD
10
11
12
16
13
17
15
14
Indicates the battery level.
Indicates the battery charging status (fast, slow,
stop).
Indicates secured communication on WTLS in imode browsing.
Indicates that your phone is connected to a
GPRS/EDGE modem such as PC.
(gray)
Indicates that the phone is in the GSM (Global
System for Mobile communication) network
service area and GPRS/EDGE is active.
(yellow)
Indicates that the GPRS/EDGE is available and
i-mode (PDP Context) is active.
Indicates that the i-mode connection is carried
out.
Indicates that there is a new SMS on the
network.
Indicates that the i-mode lock is on.
Indicates that the Inbox in your phone is full.
Indicates that the memory for mail/MMS is full.
(red, green/red, green)
Indicates that new voice mail messages are on
the network (No ALS or ALS Line 1/ALS Line 1
and 2/ALS Line 2).
Indicates that there is a new SMS in your phone.
Indicates that the SIM memory is full.
(pink)
Indicates that there are mail and MMS on the server.
(yellow)
Indicates that there is a new mail/MMS in your
phone.
viii Before You Start
indicates that the ALS line 1 or 2 is unencrypted/
no ALS.
This yellow icon blinks while a mail/MMS is being
downloaded.
No icon appears when the phone is outside the
GSM network service area, or when the phone is
in the GSM network service area and GPRS/
EDGE is not attached.
Indicates that Bluetooth is set to on, Bluetooth is
in operation.
Indicates the line status (No ALS or ALS Line 1/
ALS Line 2). The icon with
displayed in red
Indicates the signal strength level.
Appears when you are outside the service area.
10 Network name (indicated in orange when using
roaming service)
11 Desktop icons
See “Desktop icons” on page 18 for details
12
Indicates the call diversion is set.
Indicates the Meeting mode, Pocket mode, Car
mode.
No icon appears for the Normal mode.
Indicates sound-off, vibrator-on, sound-off/
vibrator-on.
Indicates alarm-on.
Indicates the auto start of a Java™ application
has failed.
Date
13
14 Day of week
15 Remote time
16 Local time
17
Indicates that you can use the options menu by
pressing
Indicates that you can use the phonebook list by
pressing
2
Indicates the usable keys in black, while using imode or a Java™ application is in operation.
Indicates that your phone is connected to a
GPRS/EDGE modem such as PC.
(gray)
Indicates that the phone is in the GSM (Global
System for Mobile communication) network
service area and GPRS/EDGE is active.
(yellow)
Indicates that the GPRS/EDGE is available and
i-mode (PDP Context) is active.
Indicates that the help display is available by
pressing
when using SIM toolkit.
Indicates that a Java™ application is in
operation.

Indicates single/burst mode (camera).
Indicates the video mode is on or the video is
recording.
Indicates that the self timer is on.
Indicates the quality of the picture (super fine,
fine, normal, economy or super economy).
Indicates the quality of the video.
Indicates the photo/video screen size.
Indicates the zoom level.

Indicates the video is playing, on pause, stopped.
Indicates the progressive download.
Indicates the video is played in normal/enlarged
screen size.
Indicates the repeat mode is Repeat all, Repeat
one.
Indicates the video is played in normal/enlarged
screen size.
Displays the current volume level. The 0 is mute
and 9 is the maximum.

Displays the current volume level. The 0 is mute
and 9 is the maximum.

Indicates the Equalizer mode is Rock, Jazz, Pop.
Displays the current volume level. The 0 is mute
and 9 is the maximum.
2nd-LCD
Indicates the video is playing, on pause, stopped.
1 2 3 4 5 6
Indicates the shooting environment.
Indicates the brightness setting. The “+2” setting
is the brightest.
Indicates that the GPRS/EDGE is available and
i-mode (PDP Context) is active.
The progressive download icon blinks while
buffering, pausing, or stopping the download.
Indicates the video type is On-demand or Live
(green, yellow, red)
Indicates the amount of buffered data. (Green
indicates more than 70 % of data is buffered,
yellow indicates less than 70 %, red indicates
less than 30 %.)
Indicates that your phone is connected to a
GPRS/EDGE modem such as PC.
(gray)
Indicates that the phone is in the GSM (Global
System for Mobile communication) network
service area and GPRS/EDGE is active.
(yellow)
Indicates the battery level.
Indicates the battery charging status (fast, slow,
stop).
Indicates that there is a new SMS in your phone.
Indicates that there is a new SMS on the network.
Before You Start ix
Indicates the battery level.
Indicates that the SIM memory is full.
Indicates that the Inbox in your phone is full.
(pink)
Indicates that there are mail and MMS on the server.
(yellow)
Indicates that there is a new mail/MMS in your
phone.
2 This yellow icon blinks while a mail/MMS is being
downloaded.
Indicates that the memory for a mail/MMS is full
(red, green/red, green)
Indicates that a new voice mail message is on
the network (No ALS or ALS Line 1/ALS Line 1
and 2/ALS Line 2).
Indicates the Bluetooth is on, Bluetooth is in
active.
Indicates the signal strength level.
Appears when you are outside the service area.
Indicates that the phone is in the Meeting/Pocket/
Car mode.
No icon appears for the Normal mode.

8 9 10 11
Before You Start
Indicates the battery charging status (fast, slow,
stop).
10
Indicates single or burst mode of the camera.
(blue, red)
Indicates that the video mode is on or the video
is recording.
Indicates the photo/video screen size.
11
Indicates that the self timer is on.

Indicates the player is playing, stopped.
Indicates the repeat mode is Normal, Repeat all,
Repeat one.
Overview of menu function
Standby screen
Main menu screen
The Main menu has a set of icons for its top levels of options which can be selected either
using a combination of the 4-way navigation key (▲ ▼
) and (menu selection),
or just the keypad (shortcuts selection).
2 The title of the selected option will be displayed in the Help area.
2 SIM toolkit icon is displayed only when your SIM card supports this function.
2 With the Main menu screen displayed, press 0 to display your own number.
▼
▼
➡ ➡
➡ ➡
CLR
Key
Main menu
Settings
Message
Second level menu
Phone
Phone modes
Main-LCD
2nd-LCD
Power saving
Calls
Security
Network
Reset settings
Inbox
Drafts
Outbox
Sent
CB
Folder1
Folder2
Key
Main menu
i-mode
Phonebook
Camera
My data
Second level menu
i-mode
Settings
Lists
Information #
Call options
Camera
Video recorder
Videos
Sounds
Pictures
MP3
Key
Main menu
Java
Accessory
SIM toolkit
Second level menu
Programs
Prog backlight
Music player
MP3 player
Calculator
Clock alarm
Scheduler
ToDo list
Notepad
Voice memo
Currency
Bluetooth
Synchronization
Before You Start
xi
Getting Started
Basic Calls & Phone Use
Text Entry
15
Desktop icons
18
Settings (M1)
20
Message (M2)
27
i-mode (M3)
33
Phonebook (M4)
48
Camera (M5)
55
My data (M6)
60
Java™ (M7)
67
Accessory (M8)
68
Bluetooth (M80)
78
Index
83
Emergency Services and Safety Precautions
Before You Start
iv
User’s manual conventions............................................. iv
Display information .......................................................... v
Parts and functions ......................................................... vi
LCD and displayed icons ...............................................viii
Overview of menu function ............................................. xi
Getting Started
Preparing the phone ........................................................1
Standby and talk times.....................................................4
Checking the battery ........................................................4
Low battery alarm ............................................................4
Other battery alarms ........................................................4
Start-up ............................................................................4
Basic Calls & Phone Use
Making basic calls............................................................5
Ending a call ....................................................................6
Receiving an incoming call ..............................................6
Unsuccessful calls ...........................................................7
Emergency calls...............................................................7
Last number redial ...........................................................7
One-touch dial..................................................................7
Fast dialling......................................................................7
Displaying your own phone number (M0/M416) ..............8
Voice recall ......................................................................8
Options menu (during a call)............................................8
Putting a call on hold........................................................9
Mute .................................................................................9
Call transfer...................................................................... 9
Multi-party calls ................................................................ 9
Recording a call ............................................................. 10
Scratchpad number........................................................ 10
Call options (M43).......................................................... 10
Call settings (M16) ......................................................... 12
International dialling codes ............................................ 14
Roaming......................................................................... 14
Text Entry
15
Mode change ................................................................. 15
T9® English text input .................................................... 15
Normal text input............................................................ 16
Numeric input................................................................. 17
Key allocations............................................................... 17
Desktop icons
18
Settings (M1)
20
Phone (M11) .................................................................. 20
Phone modes (M12) ...................................................... 21
Main-LCD (M13) ............................................................ 23
2nd-LCD (M14) .............................................................. 23
Power saving (M15) ....................................................... 23
Calls (M16)..................................................................... 24
Security (M17)................................................................ 24
Network (M18) ............................................................... 25
Reset settings (M19)...................................................... 25
Message (M2)
27
Message overview ......................................................... 27
Contents xiii
Reading a message (M21) ............................................ 28
Creating a message....................................................... 31
Cell broadcast (M25) ..................................................... 33
i-mode (M3)
33
i-mode operation guide .................................................. 33
i-mode screen ................................................................ 39
i-mode menu screen ...................................................... 39
iMenu screen ................................................................. 42
Browser Options menu .................................................. 42
Mail screen .................................................................... 43
i-mode glossary ............................................................. 47
Phonebook (M4)
48
Phonebook types ........................................................... 48
Accessing your phonebook (M4) ................................... 49
Phonebook list Options menu........................................ 49
Personal data Options menu ......................................... 53
Voice mail (M417).......................................................... 54
Camera (M5)
55
Notes on using the camera............................................ 55
Taking a picture (M51) ................................................... 56
Recording a video (M52) ............................................... 58
My data (M6)
60
Videos (M61) ................................................................. 61
Sounds (M62) ................................................................ 61
Pictures (M63) ............................................................... 62
MP3 (M64) ..................................................................... 64
File selector Options menu ............................................ 64
xiv
Contents
Java™ (M7)
67
Programs (M71)............................................................. 67
Prog backlight (M72)...................................................... 68
Accessory (M8)
68
Music player (M81) ........................................................ 68
MP3 player (M82) .......................................................... 69
Calculator (M83) ............................................................ 70
Clock alarm (M84) ......................................................... 71
Scheduler (M85) ............................................................ 72
ToDo list (M86) .............................................................. 73
Notepad (M87)............................................................... 75
Voice memo (M88) ........................................................ 76
Currency (M89).............................................................. 76
Bluetooth (M80) ............................................................. 77
Synchronization (M8*) ................................................... 77
Bluetooth (M80)
78
Pairing a Bluetooth device and your phone ................... 79
Using Bluetooth for voice/modem.................................. 80
Bluetooth data exchange ............................................... 80
FTP server ..................................................................... 81
Index
83
Getting Started
Preparing the phone
Before trying to use your phone, make sure that a valid Subscriber Identity Module (SIM) card is inserted and the battery is charged.
SIM card
Before using your phone, you must sign-up with one of the digital network service providers. In addition to your subscription details you will receive a
personal SIM (Subscriber Identity Module) card which is inserted into your phone.
If the SIM card is removed, the phone becomes unusable until a valid SIM card is fitted. It is possible to transfer your SIM card to another compatible
phone and resume your network subscription. The screen on your phone will display appropriate messages if no SIM card is fitted.
, If the phone, or the SIM card, is lost or stolen then you should contact your service provider immediately in order to bar it from use.
2 The phone supports a number of languages and the keyboard symbols have been chosen for world-wide operation.
2 The digital technology of your phone helps to ensure that your conversations are kept secure.
2 The SIM card contains personal data such as your electronic phonebook, messages (see “Message (M2)” on page 27) and also details of the network
services you have subscribed to. The phone will not work (except for emergency calls on some networks) unless a valid SIM card is fitted.
, Be sure to turn the phone off before inserting and removing a SIM card. Otherwise damage to the SIM card can occur.
Inserting a SIM card
, Be sure to turn the phone off before removing the battery pack.
☛ While pressing down the areas marked with
of the rear cover as indicated by arrow ➀, slide the rear cover about 3 mm in the direction of
arrow ➁ with your finger tip. Then, lift the cover up in the direction of arrow ➂ to remove it.
☛ Lift the finger tab of the battery pack up in the direction of arrow ➃. Then lift the battery pack out in the direction of arrow ➄.
☛ With the metal part facing down, insert the straight end of the SIM card under the holder in the direction of arrow ➅. Slide the SIM card all the way
until it reaches the end.
, Be careful not to damage electric parts of the SIM holder when inserting a SIM card.
☛ Insert the two tabs on the battery pack into the slots on the phone in the direction of arrow ➇, making sure that the tabs on the battery pack fit
properly into the slots on the phone. Then, press the battery pack down in the direction of arrow ➈ to clip it into the phone.
, Make sure that the battery pack is securely attached to the phone and align the rear cover with the grooves on the phone so that there is a gap
of about 3 mm at the end of the cover. After making sure that there is no gap between the rear cover and the phone body, slide the rear cover in
the direction of arrow ➉ until you hear a click.
Getting Started
Slots
Finger tab
Tabs
Battery
Rear cover
Holder
About 3 mm
bout 3 mm
SIM card
Check that there is no gap
between the rear cover
and the phone body.
, If the SIM card is not fully inserted when the battery is replaced, damage to the SIM card can occur.
/ If the SIM card is already fitted, see “Start-up” on page 4.
Removing a SIM card
☛ With the battery removed, push the short and straight end of the SIM card with your thumb to slide it gently in the direction of arrow ➆ ➔ Lift the
SIM card after it is completely removed from the holder.
, Be careful not to damage electric parts of the SIM holder when removing a SIM card.
Getting Started
Charging the battery
Before trying to use your phone, insert the phone’s battery, and connect the NEC battery charger (AC adapter) supplied with your phone to a suitable
mains power socket.
☛ Pull open the charger connector cover gently.
, Be careful when handling the charger connector cover. Do not pull strongly.
Charger connector
☛ With the arrow marks of the charger plug facing up, hold the buttons on both sides of
the charger plug with your thumb and index finger.
Press
Press
☛ Press the buttons as indicated by the arrow marks on the charger plug and insert the
Charger plug
plug into the charger connector.
Arrow marks
, Make sure to insert the charger plug with the arrow marks facing up. Otherwise,
damage to the charger connector can occur when disconnecting the charger plug. Make sure to hold the charger plug with the arrow
marks facing up and press both buttons.
2 If your phone is turned on and charging starts, the battery charging icon will be
displayed. LED will turn on in red while charging. When charging is complete, the LED
will turn off.
2 You are recommended to switch off the phone while charging. If you need to receive
Charger connector
calls, your phone can be switched on and left in standby while being charged,
Press
Press
although the total time taken to charge is then increased.
Charger plug
☛ After the charging is complete, press the buttons of the charger plug as indicated by
the arrow marks on the charger plug (➀) and gently pull straight out of the charger
Pull straight
connector (➁).
Make sure to press both buttons and gently pull
, Make sure to press both buttons when disconnecting the charger plug from the the charger plug straight.
charger connector. If you pull the charger plug forcibly without pressing the
buttons, damage to the charger connector can occur.
The icons show the charging status of battery.
Fast battery charging
Slow battery charging while the phone is in use
Battery charging stopped due to overheat
, Using any battery pack, AC adapter, vehicle power adapter (option) not specified by NEC for use with this phone can be dangerous and
may invalidate any warranty and approval given to the cellphone. Do not leave the charger connected to the mains supply when it is not
in use.
, Do not try to charge the battery if the ambient temperature is below 5°C (41°F) or above 35°C (95°F).
, DO NOT connect a charger or any other external DC source until the phone’s battery is inserted.
2 If the phone does not respond, please wait for a few minutes. The charging will then start.
2 If you use the phone while charging, handle the phone carefully since the cable or adapter is connected.
2 If you make/receive a call while charging, the charging may temporarily be interrupted.
2 Charging takes approximately 3 hours with your phone turned off.
2 Even if the phone remains connected to the charger, battery residual capacity may decrease when the phone is used for video recording, playing or
other battery consuming operation.
Getting Started
, IMPORTANT BATTERY CHARGING INFORMATION
Charging a very low battery
The battery’s charge continues to drop after the low battery warning is displayed. In extreme cases where the battery is left uncharged for some
considerable time after this warning, a trickle charge is used to slowly top-up the battery to the safe level at which the fast charging can begin. The
phone can be in trickle charge for a few minutes before the fast charging starts.
Standby and talk times
Your phone works closely with the network you are using to provide the services you need, and the standby and talk times achieved will depend on how
you use the phone and choices made by the network operator.
In particular, factors such as your location within the network, the frequency at which this location is updated, the type of SIM card you have, your
reception of area messages or cell broadcast messages and the use of full rate or enhanced full rate speech, will affect both standby and talk times.
Checking the battery
☛ Check icon at the top of the standby screen.
The number of blocks on the icon shows the charge of your battery pack.
Full battery power
Partial battery power
Low battery power
Battery empty
Low battery alarm
When the battery voltage falls below the working level, a low battery warning is displayed on the screen accompanied by LED illumination and a short
tone along with an empty battery icon. The phone will automatically power down shortly afterwards.
2 Please charge the battery as much as possible when the battery is very low.
Other battery alarms
Your phone may display warnings when the battery temperature is too high, or the voltage of the battery or the charger is over the appropriate level.
Follow the instruction given by these warnings immediately.
Start-up
Switching the phone on
☛ Hold down for about a second to switch on. The screen will display the selected greeting (if set, see page 23) and the phone is then in standby.
2 You may need to charge the battery before using your phone.
2 When your phone is turned on, the specified ringer may sound.
Getting Started
2 If your phone is accidentally turned off while downloading or deleting Java™ application, it will take longer than usual to start up the phone the next
time you turn on the power.
Switching the phone off
☛ Hold down until the display shows the switch off message.
PIN code
The SIM card issued by your service provider has a security feature called PIN code protection. The Personal Identification Number (PIN) is a number
put on to the card by your service provider, and is 4 to 8 digits long. Some service providers supply SIM cards which will cause your phone to prompt for
a PIN code when it is turned on. If this is the case, enter your code with the phone’s keypad. If you insert a SIM card other than your own, information
such as call logs may be lost (see “Security (M17)” on page 24 for details).
Basic Calls & Phone Use
Making basic calls
You make a simple call in the same way as you would with a normal phone, except that you need to press after entering the area Subscriber Trunk
Dialling (STD) code and the phone number. To make international calls, you must first enter the international dialling code (see page 14).
2 Use the full STD area code even if you are calling to a person in the same town. If the numbers are too long to be displayed within one line, after
pressing
, excess part is deleted and ‘...’ is added at its end.
2 The main-LCD display shows the strength of the radio signal that links your phone to the network. The maximum signal strength is shown by 4 shaded
blocks and the minimum signal strength by 1 block.
Starting a call
☛ Key in the phone number. Check the number on the display ➔ or SK1 to send the input number to start the call
☛ Before the other party answers the call, you can end the call by pressing briefly, pressing SK2 or closing your phone. When you use the
headset, you can also end the call by pressing and holding the button on it.
2 When connecting a wired headset and Bluetooth headset at the same time, the wired headset will not work.
When the call is sent, the screen displays the number called, the name stored in the phonebook and a connection graphic or a Calling Line Identification
(CLI) picture that has been allocated to the number called (see page 52).
Correcting mistakes
and
▼
▼
Use the
to move the cursor and then press CLR to clear individual digits, or hold down CLR to completely clear a phone number.
Basic Calls & Phone Use
Ending a call
☛
While talking, press SK2 or
briefly, or close your phone. The phone returns to the standby screen.
If is held down, your phone will turn off.
When you use the headset, you can also end a call by pressing and holding the button on it.
When connecting a wired headset and Bluetooth headset, the wired headset will not work.
You cannot end a call by closing your phone when the headset is connected.
Receiving an incoming call
When someone calls your number, the ringer will play (if set - see page 22), the LED glows in the specified colour, and the phone number of the caller
may be displayed if the calling line identification facility is available and the caller has activated the feature. If the caller’s phone number has been related
and stored in your phonebook with a name and a CLI picture (see page 52), that name and picture will be displayed. If the caller has withheld their identity,
the screen will give a message that the caller’s number is being withheld. If the origin of the call cannot be determined, no information is displayed on
the screen.
2 You also have options for holding and forwarding calls. These options depend on your network and your subscription arrangements.
Accepting an incoming call
☛ While receiving an incoming call, press or SK1
2 When you use the headset, you can also accept an incoming call by pressing the button on it.
2 When connecting a wired headset and Bluetooth headset, the wired headset will not work.
2 When Auto answer function (see page 22) is set to on and a headset is connected to the phone, the incoming call is automatically accepted after
several rings.
2 You can accept an incoming call by opening your phone, when Fold answer function (see page 20) is set to on.
2 You can set your phone to answer a call when any key is pressed (see “Any key answer” on page 20).
Rejecting an incoming call
☛ While receiving an incoming call, press or SK2 briefly or close your phone.
2 When you use the headset, you can also reject an incoming call by pressing and holding the button on it.
2 You cannot reject a call by closing your phone when the headset is connected.
2 When connecting a wired headset and Bluetooth headset, the wired headset will not work.
If your phone receives a call and you do not answer it, the main-LCD will display a desktop icon of the phone number (or the name if stored) of the caller
(if available).If your phone is closed, the 2nd-LCD will also display a missed call icon, and you can display the details by pressing Side up. This
information is stored in the missed calls list. Up to 20 missed calls are stored in this list.
2 If you are making a call, the phone gives priority to receiving a call unless you have already pressed .
Basic Calls & Phone Use
/ See also: “Call diversion (M161)” on page 12 and “Call waiting and holding (M162)” on page 13.
/ See also: “Call options (M43)” on page 10.
Unsuccessful calls
If dialled call is not successfully connected, the display will give an appropriate message.
If your phone has the auto redial function activated, the number will be automatically called again after a short delay (see page 13).
Emergency calls
The standard emergency number of 112 can be used.
☛ Key in 1 1 2 ➔ or SK1 to connect the call to the local emergency services.
2 On some networks, emergency calls can be made using the 112 number without a SIM card inserted.
Last number redial
You can redial the last number you called.
☛ Ensure that the standby screen is displayed and no phone number is shown ➔
twice to dial the last number you called.
/ See also: “Call options (M43)” on page 10.
One-touch dial
One-touch dial for the phonebook (SIM) is available by pressing and holding the number keys between 2 and 9.
2 A number for the One-touch dial corresponds to the location number in the phonebook (SIM).
2 One-touch dial is available only for the phone numbers with the location number 2 to 9 stored in the phonebook (SIM).
Fast dialling
You can make a call to the phone number in the phonebook (Phone/SIM) with just a few press of button.
To fast-dial the phone number in the phonebook (SIM), use the following procedure:
☛ From the standby screen, key in the Location number of a personal data in the phonebook (SIM). Then, press #. The corresponding personal data
is displayed.
☛ to dial the phone number.
To fast-dial the phone number in the phonebook (Phone), use the following procedure:
Basic Calls & Phone Use
☛ From the standby screen, key in the Abbreviated Dialing Number (ADN) of a personal data in the phonebook (Phone). Then press . The
▼
▼
corresponding personal data is displayed.
and keys to choose the phone number (if there are more than one), then
☛ Use the
to dial the phone number.
Displaying your own phone number (M0/M416)
☛
0 or
416
Voice recall
You can store up to 10 voice recall recordings which can be allocated to a personal data stored in the phonebook (Phone). To store the voice recall
sound, see page 52. To use the voice recall function, use the following procedure:
☛ Press and hold ▼
2 When you use the headset, you can also activate the voice recall function by pressing and holding the button on it from the standby screen.
☛ Within 4 seconds, say the word or words you have recorded to identify the record you wish to recall. If the word or words were recognized, the
first phone number of the personal data stored in the phonebook (Phone) will be called automatically.
Options menu (during a call)
☛ During a call,
to display the options menu
No. Options menu (during a call)
Main menu
Displays the Main menu screen. See “Overview of menu function” on page xi for details.
Hold/Retrieve
Puts the call(s) on hold or retrieves the call(s).
Mute/Unmute
Mutes or unmutes your voice to all active calls.
Transfer call
Enables to transfer the call and connect other parties.
2 After transferring the call, your call will be dropped.
Add to conference
Merges calls and makes a multi-party call.
Private call
Make a private call to the highlighted party within the multi-party call.
Record call
Records the call while talking.
Disconnect party
Disconnects the highlighted party.
Switch call to Bluetooth/
Switch call to phone
Switches the audio path state of the call.
2 You can also switch call to Bluetooth or phone by pressing and holding #.
2 This option is available only when the Bluetooth device is connected to the phone.
Basic Calls & Phone Use
No. Options menu (during a call)
Bluetooth On
Activates the Bluetooth device.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Putting a call on hold
☛ To put the received or dialled call on hold, SK1 or
2. To retrieve the call, SK1 or
2 again.
Mute
You can mute the sound from the mouthpiece during a call. When your call is muted, the other party cannot hear any sound from your phone, but you
can still hear the sound from the other party.
☛ To mute the sound during a call, press
3. To retrieve the sound, press
3 again.
2 The mute function is automatically released after the call ends.
Call transfer
When you have an active call and a held call, you can transfer the call and connect the two parties, then you can drop from the line while leaving those
two calls active.
☛ To transfer the call,
4.
2 After dropping from the call with the other two parties, if you have a call waiting, you can proceed the call with it.
, Call transfer facility is SIM dependent.
Multi-party calls
If your SIM card is multi-party enabled, you can make a conference call to more than one caller. To create the multi-party calls, at least 3 parties, including
the host, are needed.
Receiving the second call
☛ SK1 or to accept the second call ➔ SK2 or
5 to merge both calls to initiate a multi-party call.
2 When you accept the second call, the first call will be put on hold.
Making the second call
☛ SK1 to put the first call on hold ➔ Key in the phone number ➔ SK1 or
or
5 to merge both calls to initiate a multi-party call.
to make the second call ➔ After the second participant answers, SK2
Basic Calls & Phone Use
Putting the multi-party calls on hold
☛ SK1 or
2 to put all calls on hold ➔ To retrieve the call, press SK1 or
2 again.
2 You can put the multi-party calls on hold only when you are a host of the multi-party calls.
Making a private call
While on the multi-party call, you can make a private call to a specific party.
☛ To make a private call, highlight the desired party you want to make a private call to ➔
☛ To end a private call and return to the normal multi-party call ➔
2 While you are on a private call, other parties can continue with their conversation.
2 You can make a private call only when you are a host of the multi-party calls.
Ending the multi-party calls
☛ To end the multi-party calls, or SK2.
☛ To disconnect a specific party on a multi-party call, highlight the party you wish to disconnect ➔
2 You can disconnect a specific party on the multi-party calls only when you are a host of the multi-party calls.
, Multi-party call facilities are network dependent.
Recording a call
You can record the conversation during the call.
☛ During a call, press and hold ▼ or
7 to display the Voice memo screen ➔ SK1 to start the recording ➔ SK1 to pause and SK2 to stop the
recording ➔ To play the recording, see “Recording/playing voice memo or setting speaker” on page 76.
Scratchpad number
Your phone has a scratchpad facility that enables you to take down a phone number during a call and then make a call to it when you have finished. This
scratchpad number can be stored in memory for future use.
Noting & calling a scratchpad number
☛ During a call, key in the number to be placed in the scratchpad. It will be shown on your phone’s screen ➔
will still be displayed. Press
to dial the displayed number.
when the call is finished. The number
Call options (M43)
From Call options, you can display the list of missed, received and dialled calls, the duration of the last call made and all calls, charge information and
the redial blacklist.
10 Basic Calls & Phone Use
☛
4 3 to display the Call options screen.
No.
Call options
Missed calls
Displays the list of missed calls. You can also access this function by pressing
Received calls
Displays the list of received calls. You can also access this function by pressing
Dialled calls
Displays the list of dialled calls. You can also access this function by pressing
Last call duration
Displays the duration of the last call made on your phone.
☛ SK1 to reset the display to zero.
Total calls duration
Displays the duration of the total calls made on your phone.
☛ SK1 ➔ 1 to reset the duration of the total dialled calls, 2 to reset the duration of the total received calls,
or 3 to reset the duration of all calls.
Charge info
▼
from the standby screen.
▼
from the standby screen.
from the standby screen.
Displays the charge information (Advice of Charge - AoC).
, The AoC facility is SIM card and network dependent.
2 To reset the display to zero, set the maximum charges or edit the unit price, you may be prompted to
enter the PIN2 code.
Redial blacklist
1 Total charge
Displays the total charge.
☛ SK1 to reset the display to zero.
2 Maximum
charge
Displays the maximum charge.
☛ Key in the maximum number of units allowed ➔ SK1
3 Unit price
Displays the unit price.
☛ Highlight the whole number (integer), the decimal number or the currency field
➔ Key in the required value for the whole number and decimal number fields.
For the currency field, key in the currency type using a maximum of three
characters ➔ SK1
Accesses the numbers in the blacklist.
2 If dialled call is not successfully connected (e.g. number busy), the auto redial facility will be offered (see
page 13). If you have set auto redial and the call still fails, the number called will be added to the blacklist.
2 Depending on the conditions, some options may be displayed in gray and not be available.
▼
▼
Display missed/received/dialled calls Options menu (M431M/M432M/M433M)
☛ or
4 3 1 for missed calls, or
4 3 2 for received calls, or or
4 3 3 for dialled calls.
☛ Highlight a number in the list ➔
Basic Calls & Phone Use 11
No.
Missed calls/Received calls/Dialled calls Options menu
Call
Calls the current number.
Create message
Creates a new message to the highlighted phone number.
Add to phonebook
Adds the current number to the phonebook.
☛ 1 to add it as a new personal data, 2 to add it to an existing personal data ➔ Press the appropriate
number for the storage destination ➔ Press the appropriate number for the phonebook data field to
copy the current number to.
Delete one
Deletes the current number.
Delete all
Deletes all the numbers in the list.
Info
Displays information on the current number.
Add desktop icon
Creates a desktop icon of the selected number.
Items/Page
Selects either to display 4 or 8 phone numbers in one screen.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Call settings (M16)
From the Calls screen, you can change various call settings: the call diversion, call waiting and holding, auto redial and line identification.
Call diversion (M161)
Setting Call diversion
☛
1 6 1 ➔ Highlight the type of call you wish to divert.
2 There will be a delay while your phone checks its divert status with your network.
☛ Highlight one of the conditions ➔ When the phone number field of a divert condition is highlighted, either enter the phone number to divert to, or
delete any existing phone number.
☛ If you have made any mistake, highlight the appropriate field ➔ SK1 to clear any mistakes.
☛ If the settings are correct,
, There will be a short delay while the network sends the divert status of your phone.
, There may be an additional charge for this service depending on your network.
, There may be unavailable settings depending on your network.
12 Basic Calls & Phone Use
Call diversion edit options menu
☛ Highlight the required edit field ➔
No.
Call diversion edit options menu
Copy
Copies the number in the edit field.
Paste
Pastes the previously copied number.
Disable all
Disables the numbers from all the fields.
Phonebook
Displays the phonebook to insert a number in the edit field.
Add to phonebook Adds the number to the phonebook as a new personal data or saves the number in an existing personal data.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Call waiting and holding (M162)
This facility informs you that another call is being made to your phone while an existing call is in progress.
Setting up call waiting
1 6 2 ➔ 1 1 to activate, 1 2 to deactivate the call waiting, or 2 to check the status of call waiting.
☛
Using call waiting
☛ If you are on a call and another comes in, you will be alerted by a beep in the earpiece ➔ SK1 to accept the incoming call.
☛ To switch the calls, SK1
☛ To merge the calls, SK2 (see “Multi-party calls” on page 9).
☛ To end the current call,
☛ To retrieve the held call SK1
Auto redial (M163)
With the auto redial facility, your phone will redial a number up to 10 times if the first attempt fails. A tone will be heard at each redial attempt. Your phone
cannot connect a call if the other party is busy or if there are network problems. Pressing SK2 during a redial attempt will abort it.
☛
1 6 3 ➔ 1 to activate or 2 to deactivate the auto redial facility.
Basic Calls & Phone Use 13
Line ID (M164)
, The line ID (identification) facility is network dependent.
The line ID facility enables you to choose whether or not to send your own phone number when you make a call
and also whether or not to display a caller’s phone number when you receive a call.
☛
1 6 4 to display the Line ID screen with a ✔ over an activated line and a ✘ over a deactivated line.
☛ To set the status of each line (see the table on the right), highlight a line (the line will flash when selected).
☛ SK1 to set the line identification on or off ➔ to save the current settings.
Line type Setting
Outgoing Send own #
Show connected #
Incoming Show Incoming #
Return own #
International dialling codes
When you make an international call from any country, you must start by dialling a special international access code. Your phone has the facility to prefix
a + symbol to the numbers, so that you need not enter the access code for the country that you are calling from.
Entering international dialling codes
☛ Hold down 0. The 0 character displayed will change to a + character ➔ Key in the country code, area code, and phone number that you wish to call.
The UK country code is always 44, no matter what country you are dialling from. For example, a typical UK number of 0131 1234567 is entered as:
International access country code
area code
phone number
131
1234567
44
Roaming
, You will be charged for calls forwarded to you while roaming.
The roaming facility enables you to use your phone in many parts of the world and pay all charges through your normal service provider. Your network
operator usually has agreements with named networks in other countries so that automatic roaming can take place with these named networks. The
phone also allows you to set network preferences of your own.
When dialling, you will need to add the international access codes if required. So, storing all numbers with the codes (such as +44 for UK) is helpful (see
“Entering international dialling codes”).
2 Before leaving your home country, you should select any preferences such as bar calls or call diversion.
Setting Automatic or Manual network selection (M181)
☛
1 8 1 ➔ 1 to select the automatic mode or 2 to select the manual mode.
, Before you manually select a network, ensure it is covered under the agreement you have with your service provider.
New search (M182)
☛
1 8 2 to search the available networks➔ Highlight the desired network ➔
14 Basic Calls & Phone Use
to connect to it.
Viewing/editing network list (M183)
, Before editing your network list, please consult with your service provider.
☛
1 8 3 to read the network list in the SIM memory ➔ Highlight the required network ➔
No.
SIM list Options menu
Add
Adds a new network to the list.
Move
Moves the highlighted network within the list.
☛ Use ▲ and ▼ to move the network ➔ SK1
Remove
Deletes the highlighted network.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Selecting the frequency band (M184)
You have to select the frequency band to suit the location.
☛
1 8 4 ➔ Select the required frequency band.
2 Frequency bands must be adjusted to suit the location when roaming (Europe, US, etc.), for the phone to work properly.
Text Entry
This section describes how you enter text.
Mode change
☛ With a text entry screen displayed, press SK1 to change the text entry mode: T9® English text, Normal text (ABC), Numeric input
T9® English text input
Your phone incorporates T9® Text Input, enabling fast, easy and intuitive text input. For each letter to be keyed in, you only need to press the
alphanumeric key once. The screen will display the word you may require based on the internal English dictionary of your phone.
☛ With a text entry screen displayed, press SK1 until the entry mode is T9® English input.
i) For example, to enter “Good”:
☛ Press 4 6 6 3, and then press 0 to confirm the word.
ii) To enter “Peter is good”:
☛ Press to shift to upper case (for one letter). You will see a green arrow in the Help area.
☛ Press 7 3 8 3 7 to display “Peter”, and then press 0 to confirm.
☛ Press 4 7 to display “is”, and then press 0 to confirm.
Text Entry 15
☛ Press 4 6 6 3 to display “good”, and then press 0 to confirm and the sentence is completed.
Key
Function
Confirms a word and inserts a space.
Inserts a period or a single quote as in “Let’s”, “we’re”, “it’s”, etc.
SK1(List)
Displays the list of other matching words.
SK1(Spell?)
Activates the spell mode which temporarily deactivates T9® for you to spell the word in Normal text input. The
spell mode ends when you key in 0 to enter a space, or SK1(T9).
SK2(Dismiss)
Cancels the T9® matching word list.
SK2(Next) or #
▼
▼
or
Displays the next candidate.
Places the cursor.
0 to 9 (press and hold)
Inserts the number.
CLR
Deletes any character.
Toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
(press and hold)
Press and hold to activate the highlight mode (see “Highlight mode” on page 32 for details).
Activates symbol mode when no word is highlighted.
Normal text input
☛ With a text entry screen displayed, press SK1 until the entry mode is Normal text (ABC) input.
☛ Use alphanumeric keys to enter letters. For example, to enter “e,” press 3 twice; to enter “f,” press 3 three times. For other functions, see the table
below.
2 When you are in the Normal text (ABC) input, any word entered that is not in the T9® dictionary will be added automatically.
Key
Function
Toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
(press and hold)
Press and hold to activate the highlight mode (see “Highlight mode” on page 32 for details).
Inserts a space.
0 to 9 (press and hold)
Inserts the number.
CLR
Deletes any character.
▼
▼
or
16 Text Entry
Places the cursor.
Activates symbol mode.
2 If you have made a mistake, use ▲ ▼
▼
▼
▼
to place the cursor to the left or the right of the incorrect character (depending on the Clear mode setting,
see page 33 for details) and then press CLR.
2 When entering normal (ABC) text, and the character you require is displayed, use to move to the next character position (if you wait for more than
1 second, the cursor will move one character to the right automatically).
Numeric input
☛ With a text entry screen displayed, press SK1 until the entry mode is Numeric input.
2 You can also press and hold the number key to insert the number in T9®/Normal text input mode.
☛ Use alphanumeric keys to enter numbers.
Key allocations
Whenever you need to enter text (for messages, storing names with numbers, etc.), successive presses of an alphanumeric key will display different
characters. Pressing in T9® English text input or Normal text (ABC) input toggles between lower case, shift (upper case for one letter) and caps lock
(permanent upper case). When a text entry screen is displayed, pressing SK1 enables you to select Normal text input (ABC), T9® Text input (T9) or
Numeric input (123).
2 Depending on the types of text entry screens, not all types of text entry modes are available.
Symbol mode
In the symbol mode, pressing each key will input a symbol according to its position on the Symbols screen. By pressing # in a text entry mode, the
Symbols screen will be displayed. Use ▲ and ▼ to select the row, and then press the appropriate number on the column of the required symbol.
Text Entry 17
Desktop icons
Desktop icons are shortcuts to functions or items. You can activate a desktop icon on the standby screen (desktop) in stead of following the menu and
pressing the shortcut numbers.
The desktop icons are displayed in two rows on the standby screen. See “LCD and displayed icons” on page viii for the actual location of the desktop
icon area.
There are two types of desktop icons: the automatically displayed and the manually created.
Automatically displayed desktop icons
The following automatically displayed icons are displayed on the upper row of the desktop icon area:
Icon name
Image
Description
Missed call
Displayed when there is a new entry in the Missed calls list.
Missed message
Displayed when there is a new message you have not acknowledged.
Missed Mail
Displayed when there is a new Mail you have not acknowledged.
2 You can delete all the automatically displayed icons by pressing and holding CLR on the standby screen.
2 If you turn the phone off, all the automatically displayed desktop icons are deleted.
Manually created desktop icons
The following manually created icons are displayed on the lower row of the desktop icon area
Icon name
Image Description
Icon name
Calculator
Image
Description
Phone number
Displays a dialer screen with the
registered phone number displayed.
Message
Creates a new message to the registered Clock alarm
phone number or Email address.
Displays the Set alarm screen.
URL
Activates the browser and accesses the
registered URL.
Displays the Monthly/Weekly calendar
screen.
Scheduler
Displays the Calculator screen.
Picture
Displays the image file.
ToDo list
Displays the ToDo list screen.
Note
Displays the note.
Notepad
Displays the Add new screen for Notepad.
Camera
Displays the camera view finder screen.
Voice memo
recorder
Displays the New record screen for Voice
memo.
Video
Displays the video view finder screen.
Currency
Displays the Currency screen.
18 Desktop icons
Icon name
Image Description
Icon name
Image
Description
Music player
Displays the Music player screen.
Bluetooth Voice/
Modem
Displays the Bluetooth Voice/Modem
screen.
MP3 player
Displays the MP3 player screen.
Bluetooth data
exchange
Displays the Bluetooth data exchange
screen.
Creating a desktop icon manually
☛ Highlight the required function (Camera, Video, Music player, MP3 player, Calculator, Clock alarm, Scheduler, ToDo list, Notepad, Voice memo,
Currency, Bluetooth Voice/Modem, or Bluetooth data exchange) or display the item (image file, note file, phone number, Email address, or URL).
☛ For functions, SK1
☛ For items,
to display the Options menu and select Add desktop icon (for an image/note file, this menu is under Use item)
2 For Camera/Video/Music player/MP3 player, you can also display the Options menu and select Add desktop icon (for Camera/Video, this
menu is under Other settings).
2 You can create up to 10 desktop icons.
2 If you have more than 5 desktop icons, an arrow will be displayed to indicate that you can scroll for more icons.
2 The phone number, Email address or URL desktop icon data will not be updated when the original data is modified. Delete the old desktop icon
and create a new one in such a case.
2 When you create a desktop icon of an image file or notepad file, the file will be automatically protected. The default title will be the file name. Even
if this title is changed, the original file name will remain the same.
2 Each manually created desktop icon has a title that you can edit.
Activating a desktop icon
➔ Highlight the required desktop icon ➔
☛
2 If you do not press any key for three minutes after highlighting a desktop icon, the highlight is cancelled and the screen goes back to the normal
standby screen.
2 If you activate an automatically displayed desktop icon, it will be deleted automatically.
Desktop icon Options menu
☛ Highlight a desktop icon ➔
No.
Desktop icon Options menu
Edit title
Edits the title of the highlighted desktop icon.
Delete one
Deletes the highlighted desktop icon.
Delete all
Deletes all the manually created desktop icons.
Desktop icons 19
Settings (M1)
Phone (M11)
☛
11
No. Phone
1 Voice volume
Adjusts the sound volume output from the earpiece.
☛
Use ▲ ▼, Side keys or alphanumeric keys (0 to 9) to adjust the volume.
You can also press the Side keys to display the volume control screen and to adjust the volume setting.
During a call, you can press the Side keys to adjust the setting of the volume as required.
When you change this setting while a headset is connected, the changed volume will be valid only when you have a
headset connected.
2 While using a Bluetooth headset, you cannot change the volume.
2 Answer options
1 Any key answer
On: Any key (except , SK2, the Side keys) is valid to answer a call.
Off: Only and SK1 are valid to answer a call.
2 Ring silencer
On: Pressing one of the Side keys stops the ringer sound and the vibrator while receiving a call
with the phone closed.
2 This function cannot be used if the Side keys are locked.
3 Fold answer
On: You can answer an incoming call by opening your phone.
3 Side key
Disable: Side keys are locked while your phone is folded.
2 You can also lock/unlock the Side keys by pressing and holding
4 ALS setup
, The Alternate Line Service (ALS) facility is SIM card and network dependent.
on the standby screen.
If your SIM card supports ALS, you can setup which line to use for Outgoing call or Voice mail.
20 Settings (M1)
No. Phone
5 Clock
6 Language
1 Show clock
Sets to display the local time, both the local and remote times or no time on the main-LCD.
2 Set time
Sets the time for the local or remote time.
3 Set date
Sets the date.
4 Set date format
Selects the date display format.
5 Set time format
Selects the time display format from 12 hour or 24 hour.
6 Set timezone
Sets the timezone. (A ✔ is placed on the currently selected timezone.)
☛ Highlight the required timezone ➔ Press SK1 to save the change.
2 If the highlighted timezone has Daylight Saving, a check box will be displayed at the bottom
of the screen. Press
to activate (✔)/deactivate the setting.
7 Set start day
Selects whether to start the week on Sunday or Monday.
2 This setting affects the functions related to the day of the week, such as Scheduler. (See
“Scheduler (M85)” on page 72 for details.)
Selects the language the phone displays.
2 When you have switched the language to be displayed, please wait until the new setting becomes active.
7 LED
Selects the Light Emitting Diode (LED) colour for incoming calls/SMS/Mail or during a call.
2 If the personal setting or the Group setting for the LED colour is also set in the phonebook, it has priority over this LED
setting. (See “Allocating a LED colour” on page 52 for details.)
8 Earphone type
Selects the earphone type from Stereo or Monaural, depending on your earphones (headset).
Phone modes (M12)
Your phone can be set to one of the following modes: Normal mode, Meeting mode, Pocket mode or Car mode.
, Any changes made to the settings while in a particular mode will be stored and used when that mode is selected again.
Selecting your phone mode
☛ ▲ or
1 2 ➔ Press the appropriate key for the required mode.
2 You can also set the Meeting mode or return to the previous mode by pressing and holding ▲ on the standby screen.
Editing the mode settings
☛ ▲ or
1 2 ➔ Highlight the required mode ➔ SK1 ➔ Press the appropriate number for the required setting in the following table.
2 For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
Settings (M1) 21
2 When you change this setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
No.
Phone mode setting
Ringer
Selects the Sound or Video for incoming calls. (See “Sounds (M62)” on page 61 or “Videos (M61)” on page 61 for
details.)
2 If the Video is set, it will sound and will be displayed regardless of the CLI picture setting for the personal data
in Phonebook. (See “Allocating a picture as a CLI” on page 52.)
Ringer volume
Sets the sound volume for incoming calls.
2 While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
2 While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired
headset and the speaker of the phone are saved individually.
2 While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker
of the phone is used.
SMS tone
Selects the ringtone for incoming SMS messages. (See “Sounds (M62)” on page 61 for details.)
SMS tone volume
Sets the sound volume for incoming SMS messages.
Mail tone
Selects the ringtone for incoming Mail or MMS messages. (See “Sounds (M62)” on page 61 for details.)
Mail tone volume
Sets the sound volume for incoming Mail or MMS messages.
Key tone
Turns on/off the key tone.
Service tone
Turns on/off the service tone.
Alarm volume
Sets the sound volume for Clock alarm and Schedule alarm.
Vibrator
Turns on/off the vibrator function.
Earphone setting
Selects the sound output from Earphone & Speaker or Earphone.
2 This option affects the headset.
Auto answer
Selects whether to answer an incoming call automatically.
2 To use the Auto answer function, connect the headset to your phone and set the earphone volume to 1 or
higher. If the earphone volume is set to 0, you must turn the vibrator ON to use the Auto answer.
2 The Auto answer function only applies to the first incoming call. When you have another incoming call, you
have to answer it manually.
2 If the selected mode is Car mode, the backlight will always be turned on. This will accelerate the battery consumption.
22 Settings (M1)
Main-LCD (M13)
☛
13
No. Main-LCD
Greetings
Selects the greeting which is displayed on the main-LCD during phone start-up from No greeting, Text or Animation.
☛ If you select Text greeting, press SK1 to edit the greeting text. Key in a greeting text and press .
Wallpaper
Selects a picture or video file to use as the background for the main-LCD.
Colour style
Selects the phone’s colour theme.
2nd-LCD (M14)
☛
14
No. 2nd-LCD
Clock/Event display
Selects which items to display on the 2nd-LCD from Clock & Event, Clock only, Event only or Off.
Wallpaper
Selects a picture file to use as the background for the 2nd-LCD.
Clock selection
Selects the type of clock to be displayed on the 2nd-LCD.
2 When selecting Digital 2 clock, no icon will be displayed in the standby screen of the 2nd-LCD.
Incoming call No.
Turns on/off the function to display the incoming call number on 2nd-LCD.
Contrast
Sets the contrast level of the 2nd-LCD.
☛ Use ▲, ▼ or Side keys to adjust the contrast. The contrast gauge is displayed on the 2nd-LCD.
Power saving (M15)
☛
15
2 If the selected mode is Car mode, this function is displayed in gray and is not available.
No.
Power saving
Level setting
Selects the power saving level from Level 1 (minimum power save setting), Level 2 (moderate) or Level 3 (maximum).
2 The main-LCD backlight will turn dim and then turn off after a given amount of time with no operation.
2 When the phone is folded, Power saving level also applies to the 2nd-LCD.
Settings (M1) 23
No.
Power saving
Function key LED
Selects whether to flash the LED of SK1 and SK2 when the main-LCD and its backlight are turned off.
2 If the selected mode is Car mode or the camera view finder screen is displayed, the main-LCD backlight will always
be on.
Calls (M16)
☛
16
/ For settings provided on the Calls screen, see “Call settings (M16)” on page 12.
Security (M17)
☛
17
The security settings will help to protect your phone from improper and unauthorized use. You may be required to enter one of the five codes (shown
below). When the phone prompts you for one of these codes, key in the appropriate number.
• PIN code (provided by your network service provider to protect your SIM card if it is stolen)
• PIN2 code (provided by your network service provider for charge information and Fixed dialling services protection)
• PUK code (personal unblocking key in case you forget PIN code)
• PUK2 code (personal unblocking key in case you forget PIN2 code)
• Security code
, If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.
PIN code
Your phone can be set up so that your PIN code must be entered at power up before the phone can be used at all. If the PIN code is not entered, not
even incoming calls can be answered. Entering your PIN code incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN
code. In such a case you will have to contact your service provider for a PUK code to unblock your SIM card.
2 Some SIM cards are set up so that PIN number entry cannot be turned off.
2 When SIM PIN lock is enabled, you can change the PIN code.
PIN2 code
Your phone supports advanced feature that may require a PIN2 code to be entered before they can be accessed or modified. Entering your PIN2 code
incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN2 code. In this case you will have to contact your service provider
for a PUK2 code.
, The PIN2 code is SIM card related and may only be available from your service provider.
24 Settings (M1)
No.
Security
Change PINs
Changes the PIN or PIN2 code (PIN activate setting must be turned on to change the PIN code).
PIN activate
Turns on/off the PIN code entry required at starting up the phone.
Change
Changes the security code which is used to set some of functions and unlock the Personal Information Manager (PIM)
security code features.
2 The default setting of the security code is “0000”.
Phone lock
Turns on/off the Phone lock function which will lock the phone: you can only make emergency calls or enter the security
code. After entering the correct security code, you can use the phone normally.
2 Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone was
powered down.
Bar calls
You can bar the following calls made/received on your phone: all outgoing (dialled) calls, international outgoing (dialled)
calls, international outgoing (dialled) calls except to home, all incoming (received) calls or Incoming (received) calls
when roaming.
Bar calls
(Continued)
, Bar calls facilities are network services and may require a password.
Change settings
☛ Highlight the type of restriction and the call type, and then ➔ to save changes.
☛ Key in your bar calls password to verify user identification to the network ➔ SK1 to
confirm and save changes to the network.
2 The selected settings have red bars over their icons.
Set password
Changes the bar calls password.
Fixed dialling Turns on/off the fixed dialling which restricts the use of dialled number to only the Fixed Dialling Numbers (FDN).
, The FDN facility is network dependent.
/ See also: “Fixed dialling numbers (FDN)” on page 48.
Network (M18)
☛
18
/ For settings provided on the Network screen, see “Roaming” on page 14.
Reset settings (M19)
☛
19
This function will reset your phone to its factory settings.
Settings (M1) 25
, By restoring the factory settings, any changes you have made to your phone EXCEPT the following will return to the factory settings (the
following data/settings will not be reset):
• Settings: Set time for Local time, Set date, Language, all settings in Calls other than Auto redial, all Security settings other than Change security
code, SIM list settings in Network.
• Call options: Information in Charge info.
• Phonebook: All Phonebook entries. The settings for Groups.
• Accessory: All Schedule, ToDo, Notepad and Voice memo entries. All the settings other than Clock alarm, Play list for MP3 player, View events for
Scheduler, Sort for ToDo, and Timer setting and My phone settings for Bluetooth.
• i-mode: All Bookmarks, Saved pages, Go to webpage, and Mail settings. All the i-mode related settings.
• Java™: All the Java™ applications.
• Message: All the stored messages. The settings for SMS centre, Validity period for SMS and Language for Cell Broadcast.
• My data: All stored files.
26 Settings (M1)
Message (M2)
Message overview
Message services
Your phone supports the following messaging services:
•Short Messaging Service (SMS) allows you to send short messages (160 half-pitch characters max.) to one or more phone numbers. To send an
SMS message, the destination phone number must be a mobile phone with an SMS service subscription. SMS service also supports Enhanced
Messaging Service (EMS) for which the maximum length of the message you can send depends on the number of linked messages (maximum of
10 linked messages are available).
•Mail (i-mode messaging service) allows you to send a message to not only other cellphones but also to PCs and other devices that uses Email
addresses. You can attach files from Pictures, Videos and Sounds in My data (see page 60). Mail facility is available from the Mail screen under
the i-mode facility. For details on the mail service, see “i-mode (M3)” on page 33.
•Multimedia Messaging Service (MMS) is a service that allows you to send messages of a slideshow of text and multimedia files. When you receive
an MMS message, you will be notified by a message from the MMS centre. You can either automatically or manually receive the contents of an
MMS message. MMS facility is available from the Mail screen under the i-mode facility. For details on the mail service, see “i-mode (M3)” on
page 33.
, The Message Services are network dependent.
Sending/Receiving messages
While an SMS message is being sent or received, a name or a number will be displayed (if a name has been stored with the number in your phonebook).
The received messages are stored on the SIM card or in your phone memory. When you receive a message, your phone will ring or beep during a call,
a new message icon will be shown on your phone’s display and its LED will glow.
2 Please delete the unnecessary messages in the folders from time to time. The phone cannot receive any messages when the Inbox folder is full.
Message screen
☛ To display the Message screen,
No.
2 or press and hold
➔ Press the appropriate key for the required option.
Message screen menu
Inbox
The received messages are stored here.
Drafts
The messages currently being edited are stored here.
Outbox
The messages that failed to be sent are stored here.
Sent
The sent messages are stored here.
Message (M2) 27
No.
6, 7
Message screen menu (Continued)
CB
The received broadcast messages are saved. See “Cell broadcast (M25)” on page 33 for details.
Folder1/Folder2
The messages moved by Move msg (see “Message list Options menu” on page 29) are stored here.
2 If there is no message in a message list, the list will be displayed in gray and you cannot select it.
Reading a message (M21)
☛ To display the Message view screen of a new message,
2 1 or press and hold
and press 1 ➔ Highlight the new message ➔
☛ The new (unread) messages are displayed in bold.If the message cannot be displayed in one page, use ▲ and ▼ to scroll through the message.
The following icons will be displayed.
Icon type
Message
type icons
Storing
location
icons
Sorting
status icons
Icons Descriptions
SMS message
Incomplete SMS message
Highlighted message stored in SIM
Highlighted message stored in the phone
memory
Messages sorted by Date
Messages sorted by Name
Messages sorted by Read/Unread status
Messages sorted by Size
Messages sorted by Ascending order
Messages sorted by Descending order
Message Options menu (M2M)
☛
or press and hold
and press
28 Message (M2)
Icon type
Icons Descriptions
Read / Unread
New / Unread message(s)
status icons
Read message(s)
Filtering
SMS messages filtered by status (incomplete)
status icons
SMS messages filtered by location (SIM)
Sent message
status icons
SMS messages filtered by location (the phone
memory)
Filtered SMS messages
Sent but failed message
Sent message
No. Message Options menu
SMS settings
SMS centre
Edits the SMS centre number (this number is saved in the SIM card).
Auto display
Turns on/off the automatic display function that displays the received SMS messages
automatically.
Receipt request
Selects whether to request a receipt of the sent SMS messages.
Max linked msgs
Sets the maximum number of linked SMS messages. This function divides an SMS with
the message text exceeding the maximum number of characters allowed into multiple
messages.
Validity period
Selects the period of time an SMS message is stored at the SMS centre, while trying to
deliver the message.
Enable
1 to receive none, 2 to receive all, or 3 to specify a list or Cell Broadcast Message
Identifier (CBMI) to receive broadcast from.
Languages
Selects which language to receive the cell broadcast messages in.
CB settings
View msg status Displays the information on the number of messages in the phone, the size of free/used memories, SMS units in the
phone/SIM, and complete/incomplete SMS units.
Rename folder
Renames Folder1 and Folder2.
View all
Displays all the messages in all folders on the same list.
Msg filter
Sets the type(s) of messages to be displayed by selecting the desired filter option.
, The receipt request and linking of SMS messages are network dependant.
2 Depending on the selected folder, some options may be displayed in gray and not be available.
Message list Options menu
☛ Display the message list in the Inbox, Drafts, Outbox, Sent, CB, Folder1 or Folder2 ➔
No.
Message list Options menu
Reply
Replies to the sender of the highlighted message.
Reply all
Replies to the sender and all other recipients of the highlighted message.
Delete
Deletes the highlighted message.
Delete all
Deletes all the messages in the current folder.
Forward
Forwards the message text of the highlighted message.
Msgs/page
Selects either to display 3 or 7 messages in one screen.
Message (M2) 29
No.
Message list Options menu (Continued)
Move msg
Moves the highlighted message to Inbox or Folder1/2, or copies to SIM or Phone.
Sort msg
By:
Order:
Search
Searches messages by alphabets.
View details
Displays the detailed information on the highlighted message.
–
Add desktop icon
Creates a desktop icon of the sender or recipient of the highlighted message (Inbox, Sent, Folder1, Folder2,
and Drafts only).
–
Edit
Edits the highlighted message (Drafts and Outbox only).
–
Resend
Resends the highlighted message in the folder (Outbox only).
The entire message or only the packets that failed to reach the recipient(s) can be sent.
Sorts the messages by date, name, read/unread status or size.
Sorts the messages in ascending or descending order.
2 Depending on the selected folder, the menu number and available options may vary.
2 Depending on the selected folder, some options may be displayed in gray and not be available.
Message view Options menu
☛ Display the message list in the Inbox, Drafts, Outbox, Sent, CB, Folder1 or Folder2 ➔ Highlight a message ➔
No.
➔
Message view Options menu
Reply
Replies to the sender of the highlighted message.
Reply all
Replies to the sender and all other recipients of the highlighted message.
Delete
Deletes the highlighted message.
View details
Displays detailed information on the highlighted message.
Forward
Forwards the message text of the highlighted message.
Save object
Saves the highlighted object to a folder in My data.
Move msg
Moves the highlighted message to Inbox or Folder1/2, or copies to SIM or Phone.
Highlight mode
Activates the Highlight mode (see “Highlight mode” on page 32 for details).
Option mode
Activates the Option mode to highlight the phone number, Email address, URL or attached file.
Add desktop icon
Creates a desktop icon of the sender or recipient of the highlighted message.
2 Depending on the conditions, some options may be displayed in gray and not be available.
2 The reply facility uses the phone number of the person who sent the message.
2 The Save object Options menu will be displayed only if an object is highlighted.
30 Message (M2)
Option mode Options menu
☛ Display the message list in the Inbox, Drafts, Outbox, Sent, CB, Folder1 or Folder2 ➔ Highlight a message ➔
to highlight
▼
▼
➔
9/ /
a phone number, Email address or URL in the message ➔
The columns show the menu numbers for P: Phone number highlighted, E: Email address highlighted and U: URL highlighted.
Option mode Options menu
–
Add to phonebook
Adds the highlighted phone number or Email address to a phonebook.
–
–
Dial phone number
Dials the selected phone number.
–
–
Add to bookmark
Adds the highlighted URL to the bookmarks.
–
–
Go to URL
Activates the web browser to access the highlighted URL.
Create message
Creates a new message with the highlighted phone number/Email address/URL in the To
field, the message text, or the slide text.
–
Add desktop icon
Creates a desktop icon of the highlighted phone number/Email address.
View mode
Deactivates the Option mode.
Creating a message
(green)
Indicates that an upper case letter will be input next.
(red)
Indicates the capital lock.
(no arrow) Indicates that a lower case letter will be input next.
☛To display the Message composer screen, press
2 and SK1, or press and
hold
and press SK1
☛To address the message, highlight the To field ➔ ➔ Input the required phone
number ➔
2To scroll the phone numbers in the To field, or
☛To key in the message, highlight the Message field ➔ ➔ Key in the message
➔
2Pressing
while keying in the To/Message field displays the Message edit
Options menu screen.
☛Press SK1 to send the message.
2When you are in the ABC (normal text) mode, any word entered that is not in the
T9® dictionary will be added automatically.
2When you are keying in your message, press SK1 to change the text entry mode.
2If you display another screen or receive a call while you are editing a message more
than 1 character, the message will be saved automatically in Drafts.
▼
This area contains the
information on the message.
S indicates the size of the
message equivalent to the
number of SMS messages, and
R indicates the remaining
number of characters
available.
▼
Help area
Message (M2) 31
Message composer Options menu
☛
2 SK1 or press and hold
and press SK1 ➔ Highlight To or Message field ➔
No.
Message composer Options menu
Add/Edit
Adds or edits a recipient phone number or a message.
Preview msg
Displays a message preview screen.
Delete
Deletes the highlighted recipient, message, or object.
Delete all
Deletes all the recipients.
Save
Saves the message in Drafts folder.
Phonebook
Displays the phonebook list to insert a recipient phone number.
Resend list
Inserts a phone number from the resend list.
2 You can delete the highlighted phone number from the resend list or the entire resend list by pressing
1 or
2 respectively.
Insert
Inserts a new recipient phone number (To field only).
Address list
Displays the recipients of the message (To field only).
2 Depending on the selected field, some options may be displayed in gray and not be available.
Message edit Options menu
☛
2 SK1 or press and hold
and press SK1 ➔ Highlight To or Message field ➔
➔
No.
Message edit Options menu
Text colour
Selects the colour of text and background.
Text format
Selects the font size (small, normal or large) and font style (bold, italics, underline or strikethrough).
Text alignment Sets the text alignment (left, centred or right).
Paste
Pastes the text which has been copied onto the clipboard in the Highlight mode.
2 This function can be used only when text has been copied or cut in the Highlight mode.
Highlight mode Activates the Highlight mode at the cursor position.
2 You can also activates the Highlight mode by pressing and holding .
2 This function can only be used when text has been entered.
2 To toggle the Highlight mode on/off, SK1 and to go back to the normal mode, CLR
☛ To display the following Highlight mode Options menu,
1 Text colour
Selects the colour of text and background.
2 Text format
Selects the font size (small, normal or large) and font style (bold, italics, underline or
strikethrough).
3 Copy
Copies the highlighted part of text onto the clipboard.
4 Cut
Cuts the highlighted part of text.
32 Message (M2)
No. Message edit Options menu
5 Highlight mode 5 Delete
Deletes the highlighted part of text.
6 Select word
Selects (highlights) the nearest word to the current cursor position.
7 Select paragraph Selects (highlights) the nearest paragraph to the current cursor position.
8 Select all
Selects (highlights) the entire text.
9 Save to text file Saves the highlighted part of text as a text file.
6 Insert object
Inserts Text, Sound, Still image, Animation, Emoticon, or Pictograph into the message at the cursor position.
7 T9 Language
Selects the language for T9® text input.
8 Edit settings
Sets the Write mode (Insert or Overwrite) and Clear mode (Backspace or Delete).
2 Depending on the conditions, some options may be displayed in gray and not be available.
Cell broadcast (M25)
Cell broadcast (CB) messages (e.g. weather reports, news) are sent by the network to all phones in a certain area.
☛
25
2 The Cell broadcast message display on the standby screen is erased by pressing CLR.
, Broadcast messages service is network dependent. Please contact your service provider for details.
i-mode (M3)
Using your phone’s browser facility, you can enjoy i-mode services such as browsing information on i-mode sites (programs) and other Internet web
pages, and sending/receiving i-mode messages which include the mail and MMS (including attachment).
2 You can download melody files, images, animations, Flash, videos and Java™ applications and save them in My data. Some files with restrictions
cannot be saved even though they can be downloaded and played or displayed.
/ For the definitions of the icons related to i-mode, see “LCD and displayed icons” on page viii.
i-mode operation guide
You can access various i-mode functions by selecting the menus on the main four i-mode related screens: i-mode screen, i-mode menu screen, iMenu
screen (i-mode operator portal site) and Mail screen. The following table gives an outline of the procedures related to the i-mode services.
Action
Procedure
Browsing the i-mode sites/Internet web pages
Display the homepage
☛ Press and hold or SK2 ➔ 6 ➔ 3
2 You need to set the homepage URL in Home page beforehand (see “Set homepage” on page 41).
i-mode (M3) 33
Display the URL of the current page
Bookmark a web page
Display a bookmarked web page
Save a web page
Display a saved page
Save an image
Save a phone number
Display the certificate information
of the current page
Download a file
Play a video by streaming
Download a video
SK2 ➔ 6 ➔ 1 to key in the address, or 2 to select an address in the history.
While browsing a webpage,
➔
➔1
While browsing a webpage,
➔
➔2
With the web page you want to bookmark displayed,
SK2 ➔ 5 or
2 while displaying another page ➔ highlight a bookmark ➔
With the page to save displayed,
SK2 ➔ 7 ➔ highlight a saved page ➔
With the page including the image to save displayed,
With the phone number to save highlighted,
3➔
With a page displayed,
You can also refer to a saved page’s certificate information by displaying the page and
☛ Highlight the link to the video to stream➔ (for details, see “Streaming/downloading a video” )
☛ Highlight the link to the video to download➔ (for details, see “Streaming/downloading a video” )
☛ While connecting to i-mode, to return to the previous screen (if any), or to move forward to the
next screen (if any).
Mail/MMS
Create a mail
Create an MMS
Read a mail /MMS
Check for new mail/MMS
☛
☛
☛
☛
SK1 ➔ 1 (for details, see “Creating a new mail” on page 35)
SK1 ➔ 2 (for details, see “Creating a new MMS” on page 36)
SK1 ➔ 3 ➔ Highlight a message ➔
SK1 ➔ 6
Settings for i-mode
Change the mail settings
Change the browser settings
Change the phone settings related
to i-mode
34 i-mode (M3)
3.
Highlight the link to the file to download ➔ ➔ When the download is completed, save the file and
check that the downloaded file is stored in My data (see page 60) or the Applications screen of Java™
(see page 67).
▼
Returning to the previous screen/
moving forward to the next screen
☛
☛
☛
☛
☛
☛
☛
☛
☛
☛
☛
☛ SK1 ➔ 7 (for details, see “Mail settings” on page 46)
☛ SK2 ➔ 8 (for details, see “Settings” on page 41)
☛
3 2 (for details, see page 39)
▼
Reload the current page
Procedure
▼ ▼
Action
Display a web page
Streaming/downloading a video
There are three types of video depending on the download site or data type: the video that can be played after downloading, the video that can be played
while downloading, and the streaming video that can be played while downloading but cannot be saved to your phone.
2 The maximum size of a video that you can download is 1 MB.
2 The replay volume depends on the ringer volume of your phone. If the ringer volume is set to 6 or above, however, the replay volume is adjusted to
level 5. You can change the volume while replaying a video. This change only applies to the currently replayed video.
2 For the operation while playing a video, see “Operations while replaying video” on page 61).
Streaming a video
☛ While browsing a webpage, highlight the link to the video to stream ➔
2 If you are not in the EDGE service area but in GPRS service area, you cannot activate the streaming video.
2 Streaming has priority over the incoming call/message/Clock alarm/Scheduler reminder.
Playing a video while downloading
☛ While browsing a webpage, highlight the link to the video to download ➔
☛ After download is completed, 1 to play again, 2 to save or 3 to display detailed information on the video
☛ To cancel the download before downloading is complete, SK2 or CLR
2 If the download is interrupted, you can resume downloading the same video from where it was interrupted. The download may start from the
beginning for some files depending on the sever, file type, and other conditions.
2 Even if the download continues from where it was interrupted, the replay starts from the beginning.
2 To play while downloading, Video auto play must be activated in advance (see “Video auto play” on page 41).
Options menu (during pause/stop)
☛
while the video is paused or stopped
2 Pause is not available for live streaming video.
No. Options menu (during pause/stop)
Full screen
Turns the Full screen on/off for Sub-QCIF.
2 You can also turn the Full screen on/off by pressing #.
View detail
Displays detailed information on the video.
Input URL
Enters a URL to connect to the streaming server (only available for streaming video).
Mail/MMS operations
Creating a new mail
☛ SK1 ➔ 1
i-mode (M3) 35
☛ Set the addressee.
☛
☛
☛
☛
☛
Highlight the To field ➔ ➔ key in the destination ➔
To refer to the phonebook,
➔ Open phonebk. to retrieve the destination
To send the mail to more than one addressee,
➔ Add To/Cc/Bcc
To change the To/Cc/Bcc status of an already set addressee, highlight the destination ➔
➔ Change to To/Cc/Bcc
To delete an already set addressee, highlight the To field ➔
➔ Del. address
Key in the subject.
Highlight the Subject field ➔ ➔ key in the subject ➔
Key in the message.
Highlight the Message field ➔ ➔ key in the message ➔
To attach a header,
➔ Attach header
To attach a signature,
➔ Attach sign.
Attach a file if necessary.
Highlight the Attachment field ➔ ➔ select a file to attach from the My data screen
To delete an already attached file, highlight the attachment field ➔
➔ Delete attachment
To preview the attached file, highlight the attachment field ➔
➔ Play/View file
You can attach files up to 299 KB in total, or 10 files.
To send the mail, highlight Send ➔
To save the mail, highlight Save ➔
To delete the currently edited mail,
➔ Del. mail
Creating a new MMS
☛
☛
☛
☛
☛
SK1 ➔ 2 ➔ The Compose menu screen is displayed
Using Compose menu, create an MMS (for details, see the table “Compose menu” ) ➔ SK2 ➔ The Compose MMS screen is displayed
Set the addressee and key in the subject (see “Creating a new mail” for details).
To send the MMS, highlight Send ➔
To save the MMS, highlight Save ➔
36 i-mode (M3)
Compose menu
☛ From the Compose MMS or Edit MMS screen, highlight Attachment ➔
No.
–
➔ The slide is displayed ➔
Compose menu
Add/Delete/Overwrite
media
1 Add/Delete/
Overwrite text
Adds, deletes or overwrites the text data in the text field on the slide.
2 Add/Delete/
Overwrite image
Adds, deletes or overwrites the image file in the image field on the slide.
3 Add/Delete/
Overwrite audio
Adds, deletes or overwrites the sound file in the sound field on the slide.
4 Add/Delete/
Overwrite video
Adds, deletes or overwrites the video file on the slide.
–
Exit
Shifts to the Compose MMS screen.
–
Save
Saves the currently created MMS.
–
Preview
Displays the created slides in order from the beginning at the preset playback time for each.
–
Add slide
1 Add slide
Adds a new slide after the currently displayed slide.
2 Insert slide
Inserts a new slide just before the currently displayed slide.
–
Delete slide
Deletes the currently displayed slide.
–
Text colour
Selects the Text colour from the 16 different colours.
–
Background colour
Selects the Background colour from the 16 different colours.
–
Set Fit mode
Selects the size in which the image/video is displayed.
2 This setting will be applied to all the slides.
–
Options
1 Hidden
Displays the image/video in the actual size.
2 Fill
Displays the image/video in the reduced size so that the height and width fit into
the image/video display area.
3 Meet
Displays the image/video in the reduced size so that the longer side of the height
or width fits the corresponding side of the image/video display area.
4 Slice
Displays the image/video in the reduced size so that the shorter side of the height
or width fits the corresponding side of the image/video display area.
Sets the length of time a slide is displayed, and sets the beginning and end times for text, image or sound
within that slide display time.
2 You cannot set the beginning and end time for video files.
i-mode (M3) 37
No.
Compose menu
–
Resize region
Changes the region size of the image/video field and the text field, using the ▲ and ▼ keys.
–
Switch positions
Switches positioning of the image/video field and text field on the slide.
–
Previous slide
Displays the previous slide.
–
Next slide
Displays the next slide.
2 Depending on the conditions, some options may be displayed in gray and not be available.
☛ When you finish editing attachment, SK2 or select Exit from Compose menu to return to the Compose MMS screen.
☛ If necessary, edit the composed MMS using the Edit menu options menu (see “Using the Edit menu options” for details).
Using the Edit menu options
☛ From the Compose mail/Compose MMS/Edit mail/Edit MMS screen,
No.
to display the Edit menu options.
Edit menu options
–
Send
Sends the mail.
–
Save
Saves the mail being edited to the draft folder.
–
Attach file
Attaches a file to the mail.
–
Delete attachment
Deletes the attached file(s).
–
Play/View file
Plays or displays the attached file.
–
Open phonebk.
Adds the destination directly from the phonebook.
–
Add To/Cc/Bcc
Adds a To/Cc/Bcc field.
–
Change to To/Cc/Bcc Changes the highlighted Cc/Bcc/To field to a To/Cc/Bcc field.
–
Del. address
Deletes a destination field.
–
Attach header/sign.
Attaches a stored opening sentence at the start or a stored signature at the end of the text.
–
Del. message
Deletes the message of the mail being edited.
–
Del. mail
Deletes the new message currently edited.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Reading a received mail/MMS
38 i-mode (M3)
▼
▼
☛ SK1 ➔ 3 ➔ The list of mail/MMS in the Inbox folder will be displayed.
☛ Highlight the message to read ➔ ➔ The message content will be displayed. Scroll the message content.
☛ To view the previous message , to view the next message,
▼
▼
▼
▼
2 While reading a received mail/MMS in the Inbox folder, you can use various functions. See “Inbox” on page 43.
2 If Auto play is on (see “Auto play” on page 46), the MMS/attachment will be automatically played/displayed. if not, press SK1 to start playing.
2 You can change the font size by pressing and holding the and . enlarges the font size, while reduces it.
i-mode screen
From the i-mode screen you can change the i-mode related settings of your phone.
☛
3 ➔ The i-mode screen will be displayed.
No.
i-mode screen menus
i-mode
Settings
Displays the i-mode menu screen (For details, see “i-mode menu screen menus” on page 40).
Ringer time
Sets the ringtone/vibration duration to 3-10 seconds for incoming mail/MMS.
Connection No.
Selects the connection number settings to use. The following settings are
available:
Factory setting
2, 3 User setting 1/2
Uses the default connection numbers.
Uses and changes the following settings.
Access point
i-mode server
IP address
HTTP Port No.
SSL Port No.
Portal server (i-mode server URL)
Mail
User data
Streaming Proxy
User name
Password
IP address
Port No.
i-mode lock
Locks the i-mode function, including mail/MMS.
i-mode menu screen
From the i-mode menu screen you can access to the iMenu(i/Mail/Message screen, your bookmarks, the entry screen for a URL to be displayed, the
access history, the saved pages, the list of Java™ applications and the browser settings.
i-mode (M3) 39
☛ SK2 or
No.
3 1 to display the i-mode menu screen.
i-mode menu screen menus (Sheet 1 of 3)
iMenu
Accesses the iMenu screen. (see “iMenu screen” on page 42.)
Mail
Displays the Mail screen, on which you can display received mail/MMS, saved draft messages and sent messages,
and also create new mail/MMS (see “Mail screen” on page 43).
Java application
Displays the list of Java™ applications (see “Java™ (M7)” on page 67 for details).
SMS
Displays the Message screen, on which you can read received SMS and create new SMS (see “Message (M2)” on
page 27).
Bookmarks
Displays the list of bookmarked web pages.
Bookmarks options menu
Go to webpage
Open
Displays the highlighted bookmark.
Copy address
Copies the highlighted bookmark URL.
Edit title
Edits the title of the highlighted bookmark.
Add desktop icon
Creates a desktop icon of the URL of the selected bookmark.
Create message
Creates a new message with the highlighted bookmark address in the message text.
Delete one
Deletes the highlighted bookmark.
Delete all
Deletes all the bookmarks.
Displays the URL you key in, the URL in the address history, or the homepage.
Enter address
Prompts you to key in a web page address.
Address history
Displays the list of addresses in the access history for you to select from.
Address history Options menu
Add desktop icon: Creates a desktop icon of the URL of the selected history.
Create message: Creates a message with the URL of the selected history in the text.
Delete one: Deletes the highlighted address.
Delete all: Deletes all the addresses in the list.
Saved pages
40 i-mode (M3)
Go to home
Displays the homepage set in Home page of Settings (See page 41).
2 This menu is not available, if Set homepage of i-mode menu screen is not set.
Back
Returns to the i-mode menu screen.
Displays the list of saved pages. Saved pages are stored in your phone memory so you can see them offline.
No.
i-mode menu screen menus (Sheet 2 of 3)
Saved pages
Saved pages list Options menu
Open
Displays the current saved page.
Edit title
Edits the title of the current saved page.
Protect On/Off
Protects or unprotects the current page.
Delete one
Deletes the current saved page.
Delete all
Deletes all the saved pages excluding the protected.
Delete all + Pr.
Deletes all the saved pages including the protected.
Saved pages details Options menu
Settings
Save image
Saves an image as a file on the current saved page.
Edit title
Edits the title of the current saved page.
Certificate info
Displays the certificate information on the current saved page.
Page info
Displays the URL on the current saved page.
Protect On/Off
Protects or unprotects the current page.
Delete
Deletes the current saved page.
Changes the settings of your browser.
Set time out
Disconnects the connection after the set time. You can set 60 seconds or 90 seconds,
or disable this function.
Load images
Sets whether to display images contained in web pages.
Wrap text
Sets whether to display text as is on web pages and mail/attachment text, or wrap it to
fit your phone’s screen.
Certificates
Displays the certificate information and validates/invalidates a certificate.
Send terminal info Sets whether to display a confirmation message before sending the terminal
information to the Information Providers (IPs).
, If you agree to send private information (e.g. production serial No. and SIM
No.) to the IPs via the Internet, it may be obtained by others.
Set homepage
Validates the homepage and sets the URL.
2 You can display the homepage by pressing and holding
screen.
Video auto play
from the standby
Sets whether to play a video file automatically after or during download.
i-mode (M3) 41
No.
i-mode menu screen menus (Sheet 3 of 3)
Settings
Check settings
Displays all the options set for the settings (browser).
Back
Returns to the i-mode menu screen (see “i-mode menu screen” on page 39).
2 Depending on the conditions, some options may be displayed in gray and not be available.
iMenu screen
From the iMenu screen you can access the various services provided by your i-mode service operator.
☛ SK2 or
3 1 to display the i-mode menu screen ➔ 1 to display the iMenu screen
Browser Options menu
You can use the function menus of your browser such as adding a bookmark, saving a web page and creating a message.
☛ From the iMenu screen or while downloading,
to display the browser options menu.
No.
Browser options menu
–
Add bookmark
Bookmarks the current page.
–
Bookmarks
Displays the Bookmark list.
2 This option is displayed only when one or more bookmarks are registered.
–
Save image
Saves an image on the current page.
2 This option is displayed only when one or more images are displayed on the current screen.
–
Save page
Saves the current page.
–
Add to phonebook
Saves the phone number displayed in the current page in the phonebook.
2 This option is displayed only when one or more phone numbers are displayed on the current screen.
–
Certificate info
Displays the server certificate of the current page.
2 This option is displayed only when the current page is a SSL page.
–
Go to webpage
Displays a page by keying in the URL or using the access history (see “Go to webpage” on page 40).
–
Reload
Updates the data on the current page.
–
Page info
Displays the URL of the current page.
–
Add desktop icon
Creates a desktop icon of the URL of the current page.
–
Create message
Creates a new message with the highlighted phone number or Email address in the message text.
42 i-mode (M3)
, If you agree to send private information (e.g. production serial No. and SIM No.) to the IPs via the Internet, it may be obtained by others.
2 Pressing CLR or
may not bring back the previous screen. Screen operations depend on the current screen content.
Mail screen
From the Mail screen you can use the i-mode message services.
☛ SK1 or
3 1 2 to display the Mail screen.
2 The available options differ depending on the operators.
2 If an error occurs while sending mail, it will be saved in the Draft folder as an unsent mail.
2 The same mail can be sent to up to five addresses.
2 If you save a mail while editing, it will be saved in the Draft folder.
No.
Mail screen menus (Sheet 1 of 4)
Compose mail
Displays the Compose mail screen (see “Creating a new mail” on page 35).
Compose MMS
Displays the Compose MMS screen (see “Creating a new MMS” on page 36).
Inbox
Displays the list of received mail/MMS.
Inbox list Options menu
–
Show all
Displays all the received mail/MMS.
–
Show unread
Displays only the unread mail/MMS.
–
Show read
Displays only the read mail/MMS.
–
Show protect.
Displays only the protected mails/MMS.
–
Delete one
Deletes the currently selected mail/MMS.
–
Delete read mail
Deletes all the read mails except protected mails/MMS.
–
Delete all
Deletes all the mails/MMS.
–
Title sort
Sorts the received mails/MMS by title.
–
Address sort
Sorts the received mails/MMS by address.
–
Date sort
Sorts the received mails/MMS by date.
Inbox details Options menu
–
Reply
Replies to the received mail/MMS.
–
Reply quoted
Replies to the received mail quoted.
i-mode (M3) 43
No.
Mail screen menus (Sheet 2 of 4)
Inbox
–
Reply all
Replies to the sender and all the recipients of a mail/MMS.
–
Reply quoted all
Replies to the sender and all the recipients of a mail quoted.
–
Forward
Forwards the received mail/MMS.
–
Delete
Deletes the received mail/MMS you are viewing.
–
Add desktop icon Creates a desktop icon that creates a new message to the sender.
–
Save address
–
Add to phonebook Saves the highlighted phone number into the phonebook.
Saves the address of the sender into the phonebook.
–
Create message
Creates a new message with the highlighted Email address or phone number.
–
Save melody
Saves the melody attached to the received mail.
–
Save attachment
Saves the attached file.
–
Copy message
Copies the message text.
–
Copy subject
Copies the desired subject text.
–
Copy address
Copies the desired address.
–
Play attachment
Plays the attachment content based on the content setting.
Play attachment Options menu
–
Browse
attachment
Copy text
Copies the text data on the slide.
Save image
Saves the image file on the slide.
Save audio
Saves the audio file on the slide.
Save video
Saves the video file on the slide.
Plays the attachment content manually.
Browse attachment Options menu
44 i-mode (M3)
Copy text
Copies the text data on the slide.
Save image
Saves the image file on the slide.
Save audio
Saves the audio file on the slide.
Save video
Saves the video file on the slide.
Save selection
Saves the highlighted phone number, Email address
or URL to the phonebook or bookmarks.
No.
Mail screen menus (Sheet 3 of 4)
Inbox
Sent mail
Browse
attachment
–
Protect On/Off
Create message
Creates a message to the destination in the slide text.
Play slide
Plays the highlighted slide.
Protects or unprotects the received mail/MMS.
Displays the list of sent mail/MMS.
Sent mail list Options menu
–
Title sort
Sorts the sent mail/MMS by their titles.
–
Address sort
Sorts the sent mail/MMS by their first destination addresses.
–
Date sort
Sorts the sent mail/MMS by the date they were sent.
–
Delete one
Deletes the selected mail/MMS.
–
Delete all
Deletes all the sent mail/MMS.
–
Delete all + Pr.
Deletes all the sent mail/MMS including the protected.
Sent mail details Options menu
–
Re-edit
Displays the composer to edit the sent mail/MMS again.
–
Delete
Deletes the sent mail.
–
Add desktop icon Creates a desktop icon that creates a new message to the addressee.
–
Save address
–
Add to phonebook Saves the phone number and mail address contained in the message part.
–
Create message
Creates a new message to the highlighted Email address or phone number.
–
Copy message
Starts the copy mode in the message part.
–
Copy subject
Starts the copy mode in the subject part.
Play attachment
Plays the attachment content based on the content setting (see “Play attachment” on
page 44).
–
Browse
attachment
Plays the attachment content manually (see “Browse attachment” on page 44).
–
Protect On/Off
Protects or unprotects the received mail/MMS.
–
Draft
Saves the destination address to the phonebook.
Displays the unsent and the saved draft mail/MMS.
Draft Options menu
i-mode (M3) 45
No.
Mail screen menus (Sheet 4 of 4)
Draft
Delete one
Deletes the selected mail/MMS.
Delete all
Deletes all mail/MMS.
Check new mail
Checks if there is any new i-mode messages (mail/MMS) for you stored at the mail server.
Mail settings
Changes the mail settings.
Back
Edit header
Edits the header to be added at the beginning of a mail, and sets whether to add it
automatically.
☛ Highlight the checkbox ➔ to place a check, to automatically add a header.
☛ Highlight the text box ➔ to edit the header ➔ Edit the text ➔
Edit signature
Edits the signature to be added at the end of a mail, and sets whether to add it
automatically.
☛ Highlight the checkbox ➔ to place a check, to automatically add the signature.
☛ Highlight the text box ➔ to edit the signature ➔ Edit the text ➔
Reply marker
Edits the reply markers to be added when replying to a mail with quotations from the
original.
☛ Highlight the text box ➔ to edit the reply marker ➔ Edit the text ➔
Auto play
Sets whether to automatically play or display the sound, image or video file attached,
when you open the mail.
Auto reception
Sets whether to automatically retrieve a mail after receiving the incoming mail
notification.
2 When set to on, your phone will automatically receive mail. If set to off, you will
have to manually retrieve from your i-mode service provider using the Check new
mail of Mail screen menus (see “Check new mail” on page 46).
Receive
attachment
Sets the attachment file type that can be received.
☛ Highlight the file type ➔ to place a check.
Attachment data
Selects whether to receive Melody For i-mode (MFi) files attached to a mail.
Font size
Sets the font size to display the mail.
Check settings
Displays the values set to the above mail settings.
Back
Returns to the Mail screen.
Returns to the i-mode menu screen.
2 Depending on the conditions, some options may be displayed in gray and not be available.
46 i-mode (M3)
i-mode glossary
The following defines the basic terms used in this section.
Term
Definition
Site (program)
An Internet contents page especially designed for i-mode users, which can be accessed from your i-mode top screen of
your IP.
Mail
Mail is the messaging service of i-mode. You can not only exchange messages with other cellphones, but also with PCs,
PDAs, etc.
MMS
Multimedia Messaging Service lets you send messages with image/video/sound files attached. The MMS type message is
also referred to as an MMS.
Access history
Your phone stores up to 10 URLs you have accessed. You can refer to this list when you want to go to a web page you have
accessed recently.
Web page
An Internet contents page compatible to i-mode services, which can be browsed using your phone, including the sites
(programs).
Bookmark
A bookmark contains the URL of a web page. You can save up to 50 bookmarks and use them for easier accesses.
Certificate
information
If you are displaying a Secure Sockets Layer (SSL) page designed to enable safe data transmission, you will be able to see
its certificate information.
IP
Information Provider. Your IP provides you the i-mode sites (programs).
Home page
A web page that is set in your profile as the page to connect to when you press and hold
Saved pages
You can save up to 20 web pages in your phone memory, for quick off-line access.
Streaming
Streaming video is received in a continuous stream and is played as it arrives. This type of video cannot be saved to your
phone.
from the standby screen.
i-mode (M3) 47
Phonebook (M4)
Phonebook types
Your phone can have up to 7 directories stored on your SIM card and in your phone memory: Complete (a list of all the numbers stored in the ADN and
FDN), personal directories (ADN) in the SIM card, personal directories (ADN) in the phone memory, Service Dialling Numbers (SDN), Fixed Dialling
Numbers (FDN), Own number and Voice mail number.
2 When viewing any of the directories described, you can switch to the other directories (if your SIM card supports them) by pressing
2 The maximum number of phone numbers that can be stored on a SIM card is the total of the ADN, FDN and SDN directories.
2 When you activate the phonebook, the directory which you were referring to the last time will open.
Personal directory (ADN)
These numbers are known as abbreviated dialling numbers (ADN). There are two types of ADN, one is the phonebook stored in the phone memory
(the phonebook (Phone)) and the other is the phonebook stored on the SIM card (the phonebook (SIM)).
Phonebook (SIM)
Up to 255 personal data can be stored in the SIM card. Each personal data contains a phone number, a name and a location number.
2 The number of phone numbers that can be stored on a SIM card depends on the SIM card capability.
Phonebook (Phone)
Up to 500 personal data can be stored in your phone memory. Each personal data is given a location number (1 to 500), and it can be allocated to a
group. To each personal data, you can set the following: 7 phone numbers (Home, Mobile, Work, Data, Fax, Other phone x 2), 2 Email addresses, 2
descriptive information, Group, Voice tag, LED colour, Picture/Video, Ringer and Location number.
2 Up to 10 phone numbers can have a voice recognition recording allocated to them.
Fixed dialling numbers (FDN)
Fixed dialling numbers are a means of limiting which numbers can be called from your phone. With the FDN feature switched on (see page 25), you can
call with your phone the numbers you have stored in this phonebook and the emergency number only.
, Although FDN is supported by your phone, it must be present on your SIM card - check with your service provider.
Service dialling numbers (SDN)
The numbers stored in the SDN directory are pre-installed by your service provider. They will call numbers and services as agreed with your supplier
(e.g. customer enquiries, billing information, sportslines, weatherlines, etc.) and cannot be edited by you.
, Although SDN is supported by your phone, it must be present on your SIM card - check with your service provider.
48 Phonebook (M4)
Phonebook list screen
Personal data screen
Abbreviated dialing number (ADN)
Abbreviated dialing number (ADN)
SK2
Accessing your phonebook (M4)
You can store personal information in the phonebook of your phone or your SIM card.
Displaying a personal data (M41)
☛
4 1 and the appropriate key for the desired directory or
➔
until the required directory is displayed ➔ Highlight the required personal data
Displaying information about your phonebook (M42)
☛
4 2 to display the information about your phonebook.
2 This function is SIM dependent.
Call options (M43)
☛
4 3 to display the Call options screen.
2 For details on the Call options screen, see “Call options (M43)” on page 10.
Phonebook list Options menu
☛
4 1 and the appropriate key for the desired directory or
➔
No.
until the required directory is displayed ➔ Highlight the required personal data
Phonebook list Options menu
Add new
Edit
Adds a new personal data to Phone/SIM/FDN.
Displays the data edit screen to edit the currently highlighted personal data.
2 When editing the data in FDN, you will be prompted to enter PIN2 code.
Phonebook (M4) 49
No.
Phonebook list Options menu
Copy
Copies personal data to another phonebook (see “Copying and moving personal data” on page 53 for details).
Current copy
Copies the currently highlighted personal data.
Package copy
Copies the selected data in the list.
Move
Moves the currently highlighted personal data to SIM, Phone, FDN, Own number or Voice mail number.
Delete
Deletes personal data.
Groups
Delete current
Deletes the currently highlighted personal data.
Delete all
Deletes all the data in the list.
Editing the group information
☛
☛
☛
☛
☛
☛
Highlight the group you wish to edit ➔ SK1 and highlight the required field
To rename the group name, select Group name field ➔ Key in the name of the group ➔
To set information on the selected group, select Info field ➔ Key in the info ➔
To select the LED colour, select LED field ➔ 1 ➔ Highlight the desired colour ➔
To select the CLI picture, select Picture field ➔ 1 for Picture ➔ Highlight the desired picture ➔
To select the ringer, select Ringer field ➔ 1 for Sound or 2 for Video ➔ Highlight the desired ringtone
or video ➔
☛ SK1 to set the change
2 If the personal settings for the LED colour, CLI picture, or the ringer are also set, they have priority over
those of the Group settings.
Group member list screen Options menu
☛ Highlight the group you wish to edit ➔
➔
50 Phonebook (M4)
to display the list of group members ➔ Highlight the member
Call
Calls the highlighted member.
Create message
Creates a new message to the highlighted member.
Add new
Creates a new phonebook entry to join the group.
Add to group
Adds a phonebook entry to the group.
Remove from
group
Removes the highlighted member from the group.
Remove and delete Removes the highlighted member from the group and delete the phonebook
entry at the same time.
No.
Phonebook list Options menu
Groups
Sort
Add desktop icon
Creates a desktop icon of the phone number/Email address of the highlighted
member.
Sorts the personal data in the order of alphabets or location number.
2 Sorting may take time depending on the number of personal data entries, the number of characters
contained in each entry and the type of language.
Alphabetic
Sorts the personal data alphabetically.
2 You can jump directly to a name beginning with specific characters by
pressing the appropriate key (e.g. press 5 once to jump to names beginning
with J, or twice to jump to names beginning with K).
Location
Sorts the personal data in memory location number.
Location
Searches for the personal data by the location number.
☛ Key in the desired location number ➔ SK1 to display the Phonebook list screen with the selected
personal data highlighted.
Show
Displays phonebook information.
Summary
Displays the summary of phonebook contents.
Voice tag list
Displays the phonebook entry names with the voice recognition tags recorded.
Send via Bluetooth Sends the currently highlighted personal data to another device via Bluetooth.
/ See also: “Bluetooth data exchange” on page 80.
Add desktop icon
Creates a desktop icon of the highlighted personal data.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Making a call or creating a message from the phonebook list
☛ Highlight a desired personal data to display the stored numbers or Email addresses in the help area ➔ Use
▼
▼
and to display the other stored
phone numbers or Email addresses, if any, in the help area
☛ Press to make a phone call to the displayed phone number, or press SK1 to send a new message to the phone number or Email address
Adding a new personal data
☛
4 1 and the appropriate key for the desired directory, or
until the required directory is displayed ➔ SK2 ➔ Select the directory to which
you wish to store the personal data ➔ Enter the name and other necessary information ➔ SK1 (see “Editing an existing personal data” on
page 52).
2 You can also input phone numbers on the standby screen and press to add a new personal data.
2 It is best to store numbers using the international number format.
Phonebook (M4) 51
Editing an existing personal data
☛
4 1 and the appropriate key for the desired directory or
until the required directory is displayed ➔ Highlight the required personal data
➔
2 For the phonebook (SIM) and FDN, only the name, phone number and the location number can be added or edited in the following procedures.
2 For the own number and voice mail number settings, only the name and phone number can be added or edited in the following procedures.
Adding/editing phone numbers, Email addresses & personal information
Highlight the field you wish to edit or add information to ➔
Add the required number or information or make necessary changes to the selected field ➔
Highlight another field to make further changes, if required
You can edit the Name, Phone number, Email address and Info fields by the above method.
☛
☛
☛
Allocating a group
☛ Highlight the Group field ➔
➔ Highlight the group you wish to add the current personal data to ➔
Voice recall functions
Adding a Voice recall recording
☛ Highlight the Voice tag field ➔ ➔ 1
☛ Say the name you wish to record as a voice tag ➔ Say the name again for confirmation according to the displayed message
Playing a Voice recall recording
☛ Highlight the Voice tag field ➔
➔2
Deleting a Voice recall recording
☛ Highlight the Voice tag field ➔ ➔ 3
2 Up to 10 voice tags can be stored.
2 You can check the number of stored voice tag and list of those tags (see “Summary” and “Voice tag list” on page 51).
Allocating a LED colour
☛ Highlight the LED colour field ➔ ➔ 1 ➔ Highlight the desired colour ➔
2 The personal setting for the LED colour has priority over the Group setting and phone setting for the LED colour.
Allocating a picture as a CLI
You can set a picture to be displayed on the screen as a Calling Line Identification (CLI) for an incoming call.
☛ Highlight the Picture field ➔ ➔ 1 to display the picture list screen
☛ Highlight the desired picture ➔ SK1 to preview the picture or to select the highlighted picture
2 A ✔ is displayed on the icon for which the item is currently selected.
52 Phonebook (M4)
2 See also: “Pictures (M63)” on page 62.
Allocating sound/video as a ringer
You can set a sound or video as a ringer for an incoming call. When a video is set, a movie is displayed on the screen with the sound.
☛ Highlight the Ringer field ➔ ➔ 1 to display the sound list screen or 2 to display the video list screen
☛ Highlight the desired sound or video ➔ SK1 to preview the file or to select the highlighted file
2 A ✔ is displayed on the icon for which the item is currently selected.
2 If the video as a ringer is set, it will sound and will be displayed on the screen regardless of the CLI picture setting.
2 See also: “Sounds (M62)” on page 61.
Allocating a location number
☛ Highlight the Location number field ➔
➔ Key in the desired location number ➔
Saving the edited personal data
☛ After editing the required fields, SK1 to save the edited data and return to the previous screen.
Copying and moving personal data
☛
4 1 and the appropriate key for the desired directory or
☛
☛
☛
until the required directory is displayed ➔ Highlight the required personal data/
list of data ➔
3 to copy or
4 to move
For copying, 1 to copy the highlighted personal data or 2 to copy all the personal data in the current list
Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail number)
If you copy or move from phonebook (Phone), the Origin number screen will be displayed to choose which phone number to copy.
Key in the desired location number ➔
If you copy or move to phonebook (Phone), the Number type screen will be displayed to choose which phone number type to copy to.
Personal data Options menu
☛
4 1 and the appropriate key for the desired directory or
until the required directory is displayed
☛ Highlight the required data ➔ ➔ Highlight the required field ➔
No. Personal data Options menu
Call
Calls the highlighted phone number.
Create message
Creates a new message to the highlighted phone number or Email address.
Send via Bluetooth
Sends the selected personal data to another device via Bluetooth.
Edit
Edits the selected personal data.
Phonebook (M4) 53
No. Personal data Options menu (Continued)
Copy
Copies the selected phone number(s)/Email address(es).
☛ Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail
number) ➔ Key in the desired location number ➔
Move
Moves the currently highlighted personal data.
☛ Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail
number) ➔ Key in the desired location number ➔
Delete current
Deletes the selected personal data.
Add desktop icon
Creates a desktop icon of the selected personal data.
/ See also: “Phonebook list Options menu” on page 49 for the operation of 4 (Edit), 5 (Copy), 6 (Move) and 7 (Delete current).
Voice mail (M417)
Voice mail function enables you to forward received calls to the Voice mail centre, and the caller can leave voice messages in your voice mail mailbox.
You may be notified by an icon on the standby screen if the caller leaves a voice message.
, The voice mail service is network dependent. Contact your service provider for details on your voice mail number.
Setting the Voice mail number
2 This function is available when the Voice mail number has not been set.
☛
4 1 7 ➔ Highlight the required line ➔
twice ➔
➔ key in the voice mail number ➔
➔ SK1 to save the change.
Forwarding a call to the Voice mail centre
☛ Set the voice mail centre number (see “Setting the Voice mail number” for details) ➔ Set up Call diversion (see “Call diversion (M161)” on page 12
for details). When you receive a call set to be diverted, the call will be diverted to the voice mail centre.
Retrieving a Voice mail
2 This function is available when the Voice mail number has been set.
☛
4 1 7 ➔ Highlight the required line ➔
2 You can also retrieve a voice mail by pressing and holding 1 from the standby screen.
2 To set up the line to call the voice mail centre, see “ALS setup” on page 20 for details.
54 Phonebook (M4)
Camera (M5)
Camera function enables you to take pictures or record videos and save them as Joint Photographic Expert Group (JPEG) files and 3rd Generation
Partnership Project (3GPP) files respectively. You can enjoy the picture and video files in many ways: send them attached to an MMS or Email, set a
picture file as the wallpaper for your phone, etc.
Notes on using the camera
Handling the Camera
, The camera of your phone is manufactured using high-precision technology. However, there may be dots or lines on the screen that
appear darker or brighter than the others. Note also that when you are shooting or recording in dimly-lit places, the amount of noise
(such as red and blue dots or horizontal lines) may increase noticeably.
, Be careful not to apply force to the lens when closing your phone. This could damage the lens.
2 Fingerprints or grease on the lens can result in focusing problems or dark images. Wipe the lens clean with a soft cloth before use.
2 The image quality may be degraded after your phone has been left for a long period in a warm place.
2 Exposing the camera to direct sunlight for a long period could discolour the camera’s internal colour filter and cause discoloured images.
2 Camera mode is automatically cancelled if none of the phone’s keys are pressed for 3 minutes or longer.
Precautions when taking pictures/recording videos
2 You cannot switch the camera’s shutter sound off. The shutter makes a clicking sound when you take a picture or start/end a video recording,
even when the phone is in Meeting mode.
2 Avoid camera shake. Moving the phone when you take a picture will result in a blurred image. Hold the camera firmly to keep it still when you take
a picture, or use the auto timer to take the shot.
2 As there is a slight delay from the time you press
or Side up until the picture is actually taken, do not move the camera until you hear the shutter
sound.
2 If taking a picture with not enough light, try to hold the phone still as much as possible, and for a longer period of time after the shutter sound: the
shutter speed may be slower in a darker environment.
2 Note that if you attempt to shoot directly into a strong light source, such as the sun, another bright light or the high reflecting target with strong
light, the image may contain washed-out white highlights or be disrupted.
2 While recording, be careful not to cover the mouthpiece of your phone as it is used as the microphone to record sound along with the video.
Copyright information
2 Images and videos shot or recorded on your phone cannot be used in ways that infringe copyright laws without the consent of the copyright holder,
unless intended only for personal use. Note that some restrictions apply to the photographing of stage performances, entertainments and exhibits,
even when intended purely for personal use.
Camera (M5) 55
2 Users are also asked to note that the transfer of images protected under copyright laws is only permissible within the restrictions imposed by those
copyright laws.
, Be considerate of other people’s privacy when you take a picture or record a video using the camera of your phone and send it to others.
Taking a picture (M51)
☛
☛
☛
To activate the camera function, press and hold Side up or press
51
When you highlight Camera on the Camera screen, pressing SK1 creates a desktop icon of the camera function on the standby screen.
Look into the camera view finder screen and adjust the camera position to place the target on the screen.
You can switch the camera view finder screen between the main-LCD and the 2nd-LCD by pressing .
You can take a picture while the phone is closed.
Hold the phone still ➔ To use the shutter, or Side up ➔ Check the picture ➔ If successfully taken, ➔ Saved as a JPEG file in a folder in
Pictures
2 After taking a picture, press SK1 to send the taken picture attached to a message, and press SK2 to discard the picture.
2 The default file name for the picture saved in the folder is the date, month, year and sequence number. When you take pictures in burst mode,
the saved files will be named by the default file names plus a consecutive two-digit number at the end.
2 If a call comes in while you are checking or saving a photographed image, image storage is cancelled. When this occurs, the next time you select
camera function a message appears to say that you have an image that was not stored, allowing you to check and store the image.
2 Before taking a picture, you can switch to the video camera function by pressing SK2. This use of SK2, however, is invalid if the self-timer function
is activated.
▼
▼
Operations when taking a picture
☛ To turn the light on or off, SK1 or Side down
2 Take care not to hold the light too close to your or other people’s eyes when the light is lit.
☛ To zoom in and out, ▲ or ▼
2 You can also select 1x, 2x, 3x, 4x or 5x magnification from the Zoom setting on the Camera Options menu.
☛ To turn on/off the camera view finder on the full screen, press #.
2 Depending on the photo size, there may be parts not seen on the full screen view finder display in the saved picture.
☛ To control the brightness level of the picture, or
Camera Options menu (before taking a picture)
No. Camera Options menu (before taking a picture)
Single mode/Burst mode
Switches the shooting mode to Single/Burst mode (serial shooting).
Shoot environment
Changes the camera settings to suit the environment. Select from Standard, Person, Room or Darkness.
56 Camera (M5)
No. Camera Options menu (before taking a picture) (Continued)
Effect
Applies special effect to the picture. Select from Off, Sepia, Monochrome, or Negative film.
Photo size
Sets the picture size to T1 : 128x96 pixels, T2 : 176x144 pixels, T3 :176x220 pixels, T4 : 352x288 pixels,
T5 : 640x480 pixels or T6 : 1280x1024 pixels.
2 You cannot use the Zoom function for T5 and T6, and you can select 1x to 2x magnification for T3 and
T4, 1x to 4x magnification for T2 and 1x to 5x magnification for T1.
2 You can use the Frame and Burst mode functions for T1, T2 and T3.
2 You cannot use the Full screen function for T1 and T2.
2 If you select T3, T4, T5 or T6, the picture on the camera view finder screen will be displayed as a
smaller picture than the actual size. Also on the camera view finder screen, the picture size before
shooting differs from the size after shooting.
Image quality
Sets the image quality to Super fine, Fine, Normal, Economy or Super economy.
Frame
Selects whether to use a frame when taking pictures, and sets the desired frame with which a picture will
be taken.
Self timer/Self timer cancel Activates or deactivates the self-timer function.
Sound settings
Selects the Shutter sound and Self timer sound.
Pictures
Opens Pictures in My data.
Other settings
Add desktop icon:
Automatic save:
Save in:
Light:
Brightness:
Zoom:
Thumbnail view:
Video recorder:
Flicker control:
Switch finder
Creates a desktop icon of the camera function on the standby screen.
Selects whether to save taken pictures automatically or not.
Selects the folder (preset or created) where the taken picture will be saved.
Turns the light on or off.
Changes the brightness level of the picture between -2 and +2.
Changes the zoom magnification from 1x, 2x, 3x, 4x or 5x.
Selects whether to display the pictures taken in the Burst mode as thumbnails
or slides.
Activates the video function.
Selects 50Hz, 60Hz or Auto to prevent flickers when taking a picture under a
fluorescent light.
Selects whether to display the camera view finder on the main-LCD or the 2nd-LCD.
2 On the 2nd-LCD view finder, the object appears as a mirrored image.
Full screen
Turns the Full screen on or off.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Camera (M5) 57
Camera Options menu (after taking a picture)
No.
Camera Options menu (after taking a picture)
Save current
Saves the currently displayed picture in the folder selected as Save in setting.
Save all
Saves all pictures taken in Burst mode.
Create message
Creates a new message with the file attached.
Set as wallpaper
Sets the picture to be the main-LCD or 2nd-LCD wallpaper.
Display as normal image/
Display as mirror image
Selects whether to display the taken picture as a normal or mirror image on the main-LCD
preview screen when you select the 2nd-LCD as a camera view finder in Single mode.
Save as mirror image
Saves the picture as a mirror image when you select the 2nd-LCD as a camera view finder in
Single mode.
Thumbnail view
Selects whether to display the pictures taken in the Burst mode as thumbnails or slides.
Automatic save
Selects whether to save taken pictures automatically or not.
Save in
Selects the folder (preset or created) where the taken picture will be saved.
Pictures
Opens Pictures in My data.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Recording a video (M52)
Recording a video
, To record a video, keep your phone open at all time. Unlike taking a picture, you cannot record a video while the phone is closed.
58 Camera (M5)
▼
Press and hold Side up then SK2, or press
5 2 ➔ Look into the view finder screen and adjust the camera position.
When you highlight Video on the Camera screen, pressing SK1 creates a desktop icon of the video function on the standby screen.
You can switch the camera view finder screen between the main-LCD and the 2nd-LCD by pressing .
To start recording, or Side up ➔ The progress bar will show the ratio of how much you have recorded already.
While recording, be careful not to cover the mouthpiece of your phone as it is used as the microphone to record sound along with the video.
While recording, the key tones are deactivated.
Move the camera to capture the scenes you want ➔ To stop recording, press or the Side up.
After the set video file size is reached, the recording automatically stops.
After recording, press SK1 to replay the recorded video, and press SK2 to send the video file attached to a message.
While replaying, you can fast forward by pressing or rewind by pressing . Pressing SK1 or will stop the fast forwarding/rewinding. Then,
pressing SK1 will restart and continue the replay.
▼
☛
☛
☛
2 You can discard the recorded video by pressing or CLR.
☛ To save the recorded video, . The recorded video is saved as a 3GPP file in the Videos - My movies folder in My data (see page 61).
2 Pressing # before/while playing a video file will enlarge the replay screen size, and pressing # will return the screen size to normal for T1 : 128x96
pixels only.
2 The default file name for the recorded video saved in the folder is the date, month, year and sequence number.
/ For the operations while replaying the video, see “Videos (M61)” on page 61.
/ For the operations while recording a video, see “Operations when taking a picture” on page 56.
2 If a call comes in while you are checking or saving a video, video storage is cancelled. If this occurs, the next time you select camera function a
message appears to say that you have a video that was not stored, allowing you to check and store the video.
2 Before recording a video, you can switch to the camera function by pressing SK2. This use of SK2, however, is invalid if the self-timer function is
activated.
▼
▼
Operations when recording a video
☛ To turn the light on or off, SK1 or Side down
2 Take care not to hold the light too close to your or other people’s eyes when the light is lit.
☛ To zoom in and out, ▲ or ▼
☛ To control the brightness level of the picture, or
Camera Options menu (before recording a video)
No. Camera Options menu (before recording a video)
Shoot environment
Changes the camera settings to suit the conditions. Select from Standard, Person, Room or Darkness.
Effect
Applies special effect to the video. Select from Off, Sepia, Monochrome, or Negative film.
Screen size
Sets the video screen size to T1 : 128x96 pixels or T2 : 176x144 pixels.
Video file size
Sets the video file size to Mail size or Normal size.
Quality
Sets the video quality to High or Standard.
Self timer/Self timer cancel Activates or deactivates the self-timer function.
Self timer sound
Selects the self timer sound from Sound1, Sound2 or Sound3.
Videos
Opens Videos in My data.
Camera (M5) 59
No. Camera Options menu (before recording a video)
Other settings
Add desktop icon:
Save in:
Light:
Brightness:
Zoom:
Camera:
Flicker control:
Creates a desktop icon of the video function on the standby screen.
Selects the folder (preset or created) where the recorded video will be saved.
Turns the light on or off.
Changes the brightness level of the video between -2 and +2.
Changes the zoom magnification from 1x to 5x for T1 and from 1x to 4x for T2.
Activates the camera function.
Selects 50Hz, 60Hz or Auto to prevent flickers when taking a picture under a
fluorescent light.
Switch finder
Selects whether to display the viewfinder on the Main-LCD or the 2nd-LCD.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Camera Options menu (after recording a video)
No.
Camera Options menu (after recording a video)
Save
Saves the currently displayed video.
Create message
Creates a new message with the file attached.
Set as ring tone
Sets the video as the ringtone.
Set as wallpaper
Sets the video to be the main-LCD wallpaper.
Full screen
Selects whether to enlarge the replay screen size.
2 You cannot use the Full screen function for T2 : 176x144 pixels.
View detail
Displays detailed information on the selected video.
Save in
Selects the folder (preset or created) where the recorded video will be saved.
Videos
Opens Videos in My data.
2 Depending on the conditions, some options may be displayed in gray and not be available.
My data (M6)
Using My data, you can playback sound and MP3 files, or display pictures and videos downloaded from the Internet or captured with the camera function
of your phone.
60 My data (M6)
Videos (M61)
In the following section, how to playback video files (videos) stored in your phone is described. You can either record videos using your phone, download
them from the Internet, receive them attached to messages. There are two pre-set folders: My Movies and Download.
▼
▼
▼
▼
Replaying the video files
☛ ▼ 1 or
6 1 ➔ Highlight a folder ➔ or ➔ Highlight a video file you wish to replay ➔ or ➔ The video file will be replayed.
2 When the flat view function is activated, the list of folders is not displayed. The list of all the stored video files is displayed.
2 If you wish to move to another hierarchy folder, use and
2 Pressing # on the video preview screen will enlarge the replay screen size, and pressing # again will return the screen size to normal for T1 :
128x96 pixels only.
2 For the definitions of the icons displayed while replaying, see “LCD and displayed icons” on page viii.
2 To create your own playlist, see “Music player (M81)” on page 68.
▼
▼
Operations while replaying video
☛ To stop, SK2
☛ To pause, SK1 ➔ While pausing, SK1 again to restart and continue the replay.
☛ To fast forward/rewind, or ➔ SK1 or will stop the fast forwarding/rewinding.
☛ To enlarge the replay screen size, # for T1 : 128x96 pixels only
☛ To adjust the volume, Side keys
☛ To display the previous/next file, ▲ or ▼
2 You cannot fast forward, rewind or enlarge the screen for video files with only sound but no image.
Sounds (M62)
In the following section, how to playback sound files stored in your phone is described. There are three pre-set folders: Download, Preset and Voice
memo.
▼
▼
▼
▼
Selecting and playing sound
☛ ▼ 2 or
6 2 ➔ Highlight a folder ➔ or ➔ Highlight a sound file you wish to replay ➔ or
2 When the flat view function is activated, the list of folders is not displayed. The list of all the stored sounds files is displayed.
2 If you wish to move to another hierarchy folder, use and
Operations while playing sound
☛ To stop, SK2
☛ To adjust the volume, Side keys.
My data (M6) 61
☛ To replay the previous/next file, ▲ or ▼
Pictures (M63)
The Pictures function allows you to display images and animations, which were obtained with the camera function of your phone, received as a file
attached to MMS messages, or downloaded from the Internet. The images can also be edited using this function. From the Pictures function you can
also attach images and animations to messages you compose. There are five pre-set folders: Photo, Download, Preset, Frame, and Stamp.
▼
▼
▼
▼
Displaying the Pictures view screen
☛ ▼ 3 or
6 3 ➔ Highlight a folder ➔ or ➔ Highlight an image file you wish to display ➔ or
☛ To display the previous/next image file, ▲ or ▼
2 When the flat view function is activated, the list of folders is not displayed. The list of all the stored image file is displayed.
2 If you wish to move to another hierarchy folder while the Thumbnail view is turned off, use and
Cutting the image
☛ Highlight or display the image file you wish to edit ➔
1 3 ➔ Select the image size ➔ A frame indicating the cut area appears on the preview
screen.
☛ Move the frame position ➔ ➔ SK1 if the image is favorable
2 When you select Free, a cross indicator appears on the preview screen. Move it to the point to start a frame and to confirm the position. Then,
expand the frame into the required size and to confirm.
Reducing the image size
☛ Highlight or display the image file you wish to edit ➔
1 4 ➔ Select the image size ➔ SK1 if the image is favorable
Rotating the image
☛ Highlight or display the image file you wish to edit ➔
1 5 ➔ SK1 to rotate the image 90 degrees clockwise.
☛ Keep pressing SK1 until the image is at the required angle ➔ to confirm
Decorating the image with stamps
☛ Highlight or display the image file you wish to edit ➔
16
☛ To apply a marker stamp, 1 ➔ Highlight the required stamp ➔ ➔ The marker stamp position is displayed in centre
2 If you wish to preview the highlighted stamp, press SK1. To display the previous/next stamp, ▲ or ▼.
☛ To apply a text stamp, 2 ➔ Key in the text ➔ ➔ The text stamp position is displayed in centre
☛ Move the stamp position ➔ to confirm ➔ The stamp preview is displayed again. Repeat applying if necessary, or
stamp.
☛ SK1 when finished applying the stamp (the stamp preview will not be applied this time)
62 My data (M6)
to select another
Adding a frame to the image
☛ Highlight or display the image file you wish to edit ➔
various frames by ▲ and ▼ ➔
to confirm.
1 7 ➔ Highlight a frame ➔
to preview the resulting image ➔ Scroll through the
Saving the edited image
☛ After any edition, SK1 or to save the edited image ➔ Select the Save Quality
2 SK1 to check the expected size of the image.
☛ Edit the name (if required) ➔
Printing an image using a printer
▼
You can print an Exif format image file by connecting your phone to a PictBridge compatible printer using a USB cable (option).
2 There may be PictBridge compatible printers that cannot be connected to your phone.
2 Refer to the operation manual of the printer for details on the printing.
☛ ▼ 3 or
2 3 ➔ Highlight a folder ➔ or ➔ Highlight an image file you wish to print ➔
24
2 “Print via USB” may be displayed in gray and unavailable, depending on the image file.
☛ Connect your phone and the printer with the USB cable ➔ Prepare the printer ready for printing, referring to its manual
☛ Check the print detail screen displayed
☛ To print as seen on the detail screen, SK1
☛ To edit the print detail and then print,
on the print detail screen to display the Options menu ➔ Edit the detail using the Options menu
➔ SK1
2 The Options menu may change depending on the connected printer.
2 If any interruption or error occurs, or the printing is not completed normally, pull out the USB cable and start again from the first step.
No. Print via USB Options menu
Number of prints
Sets the number of prints to output.
Layout detail
Selects the paper size, paper type and layout to print the image file.
Print quality
Selects the required quality of printing.
File name
Selects whether or not to print the file name on the paper.
Date
Selects whether or not to print the date on the paper.
2 If you want to print multiple images on one sheet, set both the settings for Number of prints and N-up on Layout screen under Layout detail. For
example, 4 for Number of prints and 2 for N-up will print 2 sheets with 2 half-sized images per sheet.
My data (M6) 63
MP3 (M64)
In the following section, the procedures to display and play your MP3 files are described. There is one pre-set folder: Download.
▼
Selecting and playing an MP3 file
☛ ▼ 4 or
6 4 ➔ Highlight the MP3 file you want to play ➔ or
2 When the flat view function is activated, the list of folders is not displayed. The list of all the stored MP3 files is displayed.
2 To create your own playlist, see “MP3 player (M82)” on page 69.
Operations while playing an MP3 file
☛ To stop, SK2
☛ To adjust the volume, Side keys.
☛ To replay the previous/next file, ▲ or ▼
File selector Options menu
☛ Display the Videos/Sounds/Pictures/MP3 list screen ➔
No.
File Selector Options menu
Edit item
Rename item:
Set protection:
Cut:
Use item (Videos)
Set as ring tone:
Set as wallpaper:
Send via Bluetooth:
64 My data (M6)
Edits the user title or name of the selected folder or file.
Sets the protection settings of the selected folder or file on/off.
Cuts the selected picture into T1 : 128x96 pixels, T2 : 176x144 pixels, Main-LCD
(176x220), 2nd-LCD (128x128) or Free.
Reduce:
Reduces the selected picture to fit within T1 : 128x96 pixels, T2 : 176x144 pixels, MainLCD (176x220) or 2nd-LCD (128x128).
Rotate:
Rotates the selected picture.
Stamp tool:
Adds a marker or text stamp on the selected picture.
Frame:
Sets a frame to the selected picture.
2 You cannot use the Cut and Rotate functions for T6.
2 You can only use the Stamp tool and Frame functions for T1, T2 and T3.
Sets the selected video to be the ringer tone.
Sets the selected video to be the main-LCD wallpaper.
Sends the selected video via Bluetooth to other devices or a cellphone.
No.
File Selector Options menu
Use item (Sounds)
Set as ring tone:
Set as SMS tone:
Set as Mail tone:
Send via Bluetooth:
Sets the selected sound to be the ring tone.
Sets the selected sound to be the SMS tone.
Sets the selected sound to be the Mail tone.
Sends the selected sound via Bluetooth to other devices or a cellphone.
Use item (Pictures)
Set as wallpaper:
Add desktop icon:
Send via Bluetooth:
Print via USB:
Sets the selected image to be the main-LCD or 2nd-LCD wallpaper.
Creates a desktop icon for the selected image on the standby screen.
Sends the selected image via Bluetooth to other devices or a cellphone.
Prints the selected image file using a PictBridge printer via USB cable (see
page 63).
Use item (MP3)
Send via Bluetooth:
Sends the selected MP3 through Bluetooth to other devices or a cellphone.
Create message
Creates a new message with the file attached.
2 This function is not available for the MP3 files.
Delete item
Deletes the selected file and folder.
Delete all
Deletes all the files in the current list.
Copy item
Copies the selected file or folder to the selected folder.
Copy all
Copies all the files in the current list to the selected folder.
Move
Moves the selected file/folder or all the files in the current list to the selected folder.
Create folder
Creates a new folder under the current folder.
Storage detail
Displays the current storage information of your phone memory.
View detail
Displays the details of the selected folder or file.
2 You can also display the details on the highlighted folder or file by pressing
Options menu.
without displaying the
My data (M6) 65
No.
File Selector Options menu
Options
Sorting order:
Info column:
Thumbnail view:
Flat view:
Save options:
Reset options:
Sorts the files by date or alphabetically.
Sets whether to display the column on the list screen, and the information to be
shown there.
None: No column showing
Size: Approximate size of the file
Type: File type
2 You can also change the information on the column by pressing # without
displaying the Options menu.
Displays the files as thumbnails.
Displays the list of all the stored files regardless of the folder hierarchy.
Saves the current option settings.
Resets the option settings.
2 Depending on the conditions, some options may be displayed in gray and not be available.
2 Depending on the size of the data, file selector operation may take a long time.
2 Neither protected data nor preset data and folders can be deleted or moved.
66 My data (M6)
Java™ (M7)
You can download Java™ applications (games etc.) from i-mode sites and run them on your phone.
Programs (M71)
How to run software
To run a software (Java™ application), perform the following.
☛
7 1 or press and hold SK2 ➔ Highlight an application containing the software you want to run ➔
2 When you display the Java™ applications list screen for the first time after downloading a program(s), it may take a while for your phone to verify
the program(s). A message will be displayed during this process, and you may activate the program(s) after it is completed.
, After downloading the software, always make sure that you check the downloaded program is displayed in the Applications screen.
, Do not remove the battery while the software is running as data to that point may not be saved.
2 While the software is active, the Java™ operation icon is displayed (see page viii).
Java™ System menu
☛
7 1 ➔ Highlight an application ➔
No. System menu
Description setting Selects whether to display the information of the selected application.
Delete all
Deletes all the applications.
Storage status
Displays the status of Java™ applications currently stored in your phone.
Trace info.
Displays the trace information.
About
Displays the information of the Java™ system.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Application menu
☛
7 1 ➔ Highlight an application you want to run ➔ SK1
No.
Application menu
Properties
Displays the information of the selected software.
Upgrade
Makes an enquiry on whether the selected software has an upgrade. If there is, starts downloading the
data.
Delete
Deletes the selected software.
Java™ (M7) 67
No.
Application menu
Network connection
Permits/prohibits the selected software to connect to the network or displays the confirmation message
every time you start the selected software.
Auto start setting
Enables or disables the automatic start of a complying Java™ application.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Prog backlight (M72)
You can set the backlight mode of your phone.
☛
7 2 ➔ 1 to set your phone to follow the normal backlight setting, or press 2 to let the backlight be controlled by the Java™ application.
2 If you set your phone to follow the normal backlight setting, the current power save settings will be active (see “Power saving (M15)” on page 23).
2 When the software is not running, the backlight operation depends on your phone’s backlight settings.
Accessory (M8)
Music player (M81)
▼
This feature allows you to create a Playlist to play music files in the order you desire. You can add AAC files saved in your phone to the Playlist (see
“Videos (M61)” on page 61) or change the order of the AAC files within the Playlist.
☛
8 1 ➔ SK1 to play ➔ After playing, SK2 to stop.
☛ To change the volume, Side keys.
☛ To play the previous file, ▲
☛ To play the next file, or ▼
☛ To play from the beginning of the music being played,
2 When there are no AAC files saved in the Playlist, the Playlist screen will be displayed in stead of the Music player screen.
2 When you use a headset, you can start or stop playing by pressing the button on it, and play the next file by pressing and holding it.
▼
68 Accessory (M8)
Music player Options menu
☛
81
No.
Music player Options menu
Playlist
Displays a list of AAC files in the order in which they are played.
2 You can save up to 30 AAC files in the Playlist depending on the size of each file.
2 The AAC files that are deleted from Video of My data or erroneous AAC files are displayed in gray and cannot be
played.
☛
to display the Playlist Options menu below, or SK1 to add an AAC file.
1 Add item
Adds an AAC file in your phone to the Playlist.
2 Move item
Moves the highlighted AAC file in the Playlist.
3 Delete item
Deletes the highlighted AAC file from the Playlist.
4 Delete all
Deletes all the AAC files from the Playlist.
5 View detail
Normal:
Repeat all:
Repeat one:
Displays the properties (folder title and status) of the highlighted AAC file.
Play mode
Plays all the AAC files in order from top to bottom of the Playlist once.
Plays all the AAC files in the Playlist repeatedly.
Plays the selected AAC file repeatedly.
Add desktop Creates a desktop icon of the Music player function on the standby screen.
icon
Notify
message
Selects whether or not to stop playing AAC files and notify you of the receipt of a new message.
2 Depending on the conditions, some options may be displayed in gray and not be available.
MP3 player (M82)
▼
This feature allows you to create a Playlist to play MP3 files in the order you desire. You can add MP3 files saved in your phone to the Playlist (see “MP3
(M64)” on page 64) or change the order of the MP3 files within the Playlist.
☛
8 2 ➔ SK1 to play ➔ After playing, SK2 to stop.
☛ To change the volume, Side keys.
☛ To play the previous file, ▲
☛ To play the next file, or ▼
☛ To play from the beginning of the music being played,
2 When there are no MP3 files saved in the Playlist, the Playlist screen will be displayed in stead of the MP3 player screen.
▼
Accessory (M8) 69
2 When you use a headset, you can start or stop playing by pressing the button on it, and play the next file by pressing and holding it.
MP3 player Options menu
82
☛
No.
MP3 player Options menu
Playlist
Displays a list of MP3 files in the order in which they are played.
2 You can save up to 30 MP3 files in the Playlist depending on the size of each file.
2 The MP3 files that are deleted from MP3 of My data or erroneous MP3 files are displayed in gray and cannot
be played.
☛
to display the Playlist Options menu below, or SK1 to add an MP3 file.
1 Add item
Adds an MP3 file in your phone to the Playlist.
2 Move item
Moves the highlighted MP3 file in the Playlist.
3 Delete item
Deletes the highlighted MP3 file from the Playlist.
4 Delete all
Deletes all the MP3 files from the Playlist.
5 View detail
Displays the properties (file name, title, artist name and recording time) of the highlighted
MP3 file.
Play mode
Normal:
Repeat all:
Repeat one:
Plays all the MP3 files in order from top to bottom of the Playlist once.
Plays all the MP3 files in the Playlist repeatedly.
Plays the selected MP3 file repeatedly.
Equalizer
Selects from Rock, Jazz, Pop and Off to obtain the desired tone.
2 The selected Equalizer setting applies to all the MP3 files in the Playlist.
Add desktop icon Creates a desktop icon of the MP3 player function on the standby screen.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Calculator (M83)
You can perform addition, subtraction, multiplication and division with the calculator. It also has a memory function.
☛
83
2 The calculator can display a result of up to 9 digits. If a calculation results in a number exceeding the maximum, the screen displays error in the
calculation field.
70 Accessory (M8)
Calculator Key Assignment
For calculator function, the keys are assigned different functions. The following shows the key assignment:
Operation
Addition (+)
▲
Multiplication (×)
Equals to (=)
SK1
Key
Operation
▼
▼
Key
Subtraction (–)
▼
Division (÷)
SK2
Memory Store/Memory Addition
Memory Recall/Memory Cancel (Press twice)
Percent (%)
Inversion (±)
Exit calculator
Decimal Point (.)
CLR
Delete digit (if held, all clear)
2 Using the % function, you can calculate (100 + x) % of a figure (e.g. 200 + 5% = 210) and (100 - x) % of a figure (e.g. 200 - 5% = 190).
Clock alarm (M84)
This feature enables you to switch the clock alarm function on/off and to set the time, repetition and alarm tone.
Turning the alarm on/off
☛
84
Clock alarm setting
On/Off
Turns on or off the alarm.
Set time
Sets the time and am/pm (for 12 hour format) at which the alarm will sound.
Set alarm tone
Sets the melody to be played when the alarm occurs (see “Sounds (M62)” on page 61).
Alarm repeat
Selects alarm repeat for once, daily or day of the week.
2 You can select more than one day of the week at the same time.
2 You can remove the check by highlighting and pressing again.
Enter alarm text
Sets the message (e.g. Wake up!) which is displayed when the alarm occurs (optional).
☛ When all settings are done, SK1 to save the setting.
2 The selected melody will be played when the alarm occurs if the ringer is turned on based on the current phone mode. If vibration is turned on, you
will be notified of the alarm by vibration.
2 Even if the phone has been switched off, the phone automatically switches itself on and sounds the alarm or vibrates at the specified time.
2 You can stop the alarm tone or vibration by pressing any key.
Accessory (M8) 71
Scheduler (M85)
Scheduler enables you to enter reminders and appointments for particular time and date.
Adding a new event
☛
8 5 ➔ Highlight the day ➔
to display the day’s schedule list screen (if any) ➔ SK1
Scheduler setting
Event date/time
Sets the day, month, year, time and am/pm (for 12 hour format) of the event.
Event end date/time
Sets the day, month, year, time and am/pm (for 12 hour format) of the end of event.
Description
Sets the event description (optional).
Repeat
Selects repeat for One time only, Daily, Weekly or Monthly.
Reminder
Turns on or off the reminder.
Reminder time
Selects the time to set off the reminder prior to the event start time.
Reminder tone
Associates a reminder tone with an event.
2 You can set the reminder tone only when the Reminder is turned on.
Private
Sets the event as a private event.
☛ Place a check mark to set the event as a private event. To set the event as a public event, do
not place a check mark.
☛ When all settings are done, SK1 to save the setting.
2 The selected melody will be played when the scheduled event occurs if the ringer is turned on based on the current phone mode. If vibration is turned
on, you will be notified of the event by vibration.
2 If the phone has been switched off, the phone does not switch itself on to sound the reminder or vibrate at the specified time.
2 You can stop the reminder tone or vibration by pressing any key.
2 If the event is a private event, the reminder will sound at the specified time but the entered description will not be displayed. You are prompted to
enter the security code to view the details of the private event.
72 Accessory (M8)
or
and SK2 to select the time to remind again.
▼
▼
Setting the reminder again
☛ When the scheduler reminder is set off,
▼
▼
Viewing the scheduled events
☛
8 5 ➔ Highlight a day (SK1 to display the previous monthly/weekly view screen or SK2 to display the next monthly/weekly view screen)
☛ to display the day’s schedule list screen (To display the previous/next day’s schedule list screen, or ).
☛ to display the detail screen of the highlighted schedule.
Scheduler Options menu
☛
8 5 ➔ Highlight the day ➔
No.
to display the day’s schedule list screen (if any) ➔ Highlight the required scheduled event ➔
Scheduler Options menu
Add new
Adds a new entry.
Edit
Edits the highlighted event.
Copy
Copies the highlighted event.
Delete
Deletes event(s). Press the appropriate keys for the event category (the currently selected event, all the public/
private events on the day, all the past public/private events, all the public/private events or all the events) to
delete.
Go to date
Displays the selected date.
Monthly calendar/
Weekly calendar
Switches the weekly view screen to the monthly view screen, or the monthly view screen to the weekly view
screen.
2 You can select Sunday or Monday to start the week from “Set start day” on page 21.
View summary
Displays a summary of all the events.
View events
Displays the events. Press the appropriate keys for the event category (Public only, Private only or All) to display.
2 You are required to key in the security code to display the private events or all events.
Send via Bluetooth Sends the selected schedule via Bluetooth to other devices or a cellphone.
2 Depending on the conditions, some options may be displayed in gray and not be available.
ToDo list (M86)
This feature allows you to set up to 100 ToDo tasks that should be finished by a certain date. You can choose to display either all ToDo tasks, or those
just finished or unfinished. Each task is identified by a description (of up to 256 characters) and its start/due date.
Adding a new ToDo task
☛
8 6 ➔ Highlight the list ➔
➔ SK1
ToDo list setting
Start date
Due date
Sets the day, month and year to start the ToDo task.
Sets the date to end the ToDo task. Key in the date or press the appropriate key for the date.
2 If you select to key in the date yourself, input the day, month and year of the date to end the ToDo task, then SK1.
Description
Sets the ToDo task description (e.g. Pay the rent).
Category
Sets the category (Business, Personal or Other).
Accessory (M8) 73
ToDo list setting (Continued)
Priority
Sets the priority (Normal, Low or High).
Private
Sets the ToDo task as private.
☛ When all settings are done, SK1 to save the setting.
When a ToDo task is completed
8 6 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔
☛
➔
Viewing ToDo task details
8 6 ➔ Highlight the list ➔
☛
➔ To view the details of the previous or next ToDo task in the list,
▼
▼
➔ Highlight the required ToDo task ➔
or
☛ To edit the currently displayed task, SK1
1 and 1, or SK2 to save the task as completed.
ToDo Options menu
☛ To display the ToDo Options menu,
8 6 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔
☛ To display the ToDo detail Options menu,
8 6 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔
➔
Column L shows the ToDo options menu, and column D shows the ToDo detail Options menu.
ToDo Options menu
Add new
Adds a ToDo task (see “Adding a new ToDo task” on page 73, from the second step).
–
Status
Changes the completion status of the highlighted ToDo task.
Edit
Edits the highlighted ToDo task (see “Adding a new ToDo task” on page 73, from the second step).
–
Delete
Deletes ToDo task(s). Press the appropriate keys for the ToDo task category (the currently selected ToDo
task, all the public/private ToDo tasks, all the completed public/private ToDo tasks or all the ToDo tasks) to
delete.
–
Delete current
Deletes the current ToDo task.
–
Display filter
Sets the type(s) of ToDo tasks to be displayed by selecting the desired filter option (None, Incomplete or
Completed).
–
Sort list
Displays a list of ToDo tasks rearranged according to the selected sort key (Due date, Category, Priority,
or Status).
–
View summary
Displays the number of Incomplete and Completed tasks and how many more tasks can be created.
Send via Bluetooth
Sends the selected ToDo task via Bluetooth to other devices or a cellphone.
2 Depending on the conditions, some options may be displayed in gray and not be available.
74 Accessory (M8)
Notepad (M87)
Notepad function allows you to record and store a note as a text file.
Creating a new memo (M871)
☛
8 7 1 ➔ Key in text ➔ to save the entry as a text file. The first few words are displayed on the text list screen.
Displaying a memo (M872)
☛
8 7 2 ➔ Highlight a file ➔ SK1 to preview, or
to edit
Notepad Options menu
☛
8 7 2 ➔ Highlight a file ➔
No.
Notepad Options menu
Edit item
Sets the protection settings of the selected file on/off.
Rename item:
Edits the user title or name of the selected folder or file.
Set protection:
Sets the protection settings of the selected folder or file on/off.
Use item
Add desktop icon:
Send via Bluetooth:
Create message
Creates a new message with the highlighted text (note).
Delete item
Deletes the selected file or folder if it is unprotected.
Delete all
Deletes all the notes unprotected from the list.
Copy item
Copies the selected note.
Copy all
Copies all the notes.
Move
Moves the selected note or all the notes in the current folder to a folder.
Create folder
Creates a new folder under the current folder.
Storage detail
Displays the current storage information of your phone memory.
View detail
Displays the detail of the selected file.
2 You can also display the details on the highlighted folder or file by pressing
Options menu.
Creates a desktop icon of the selected file on the standby screen.
Sends the selected file via Bluetooth to other devices or a cellphone.
without displaying the
Accessory (M8) 75
No.
Notepad Options menu (Continued)
Options
Sorting order:
Info column:
Sorts the files by date or alphabetically.
Sets whether to display the column on the list screen, and the information to be
shown there.
None: No column showing
Size: Approximate size of the file
Type: File type
2 You can also change the information on the column by pressing # without displaying the Options menu.
Flat view:
Displays the list of all the stored files regardless of the folder hierarchy.
Save options:
Saves the current option settings.
Reset options:
Resets the option settings.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Voice memo (M88)
Voice memo function allows you to record up to 60 seconds of sound/voice, using your phone’s microphone.
Recording/playing voice memo or setting speaker
☛
88
No.
Voice memo setting
Record
Records a voice memo.
☛ SK1 to start recording.
2 You can finish recording and save the data as a file by pressing SK2 even before the recording is completed.
/ To record the conversation during a call, see “Recording a call” on page 10.
Play
Plays a voice memo or recorded call.
☛ Highlight a voice memo ➔ to start playing and SK2 to stop playing.
Speaker setting
Selects between speaker and earpiece to play the voice memo.
☛ 1 for the Speaker, or 2 for the Earpiece.
/ See also: “Sounds (M62)” on page 61.
Currency (M89)
Currency function allows you to convert an amount of money in one currency to another.
76 Accessory (M8)
Converting currency
☛
89
Currency setting
From
Sets the source currency code.
To
Sets the destination currency code.
Exchange rate
Sets the exchange rate.
☛ If you wish to change the exchange rate, CLR to delete the displayed exchange rate and key in the required number
(for decimal point, SK1) ➔
Amount
Sets the amount of money you wish to convert (for decimal point, SK1).
2 If you have made a mistake in entering the exchange rate or amount, CLR to delete individual number or SK2 to cancel the entry and return to
the previous screen, and then start again.
Resetting the currencies
☛
8 9 and SK1
Bluetooth (M80)
Bluetooth function allows you to use your phone as a modem and to talk by using a Bluetooth headset.
☛
80
/ For details, see “Bluetooth (M80)” on page 78.
Synchronization (M8*)
Synchronization function allows you to synchronize the data (phonebook, scheduler, ToDo list data) with PC application via the USB cable.
This function can update such data between your phone and PC.
2 Data should comply with vCard 2.1/vCalendar 1.0 specification.
2 You cannot synchronize the phonebook data stored in the SIM card.
☛ Connect your phone with your PC via a USB cable ➔ Activate the software on PC side and prepare for synchronization (for details, refer to the
manuals of the software)
☛
8 ➔ Select the data type (Phonebook, Scheduler or ToDo list) ➔ SK1 or
1 to start synchronization
Accessory (M8) 77
Bluetooth (M80)
Bluetooth function allows you to communicate with the external devices (PC, PDA, headset, hands-free kit, etc.).
This function provides the following service:
• Dial-up service - You can use your phone as a modem.
• Headset/hands-free service - You can make/receive a call using a Bluetooth headset or hands-free kit.
• Data transfer - You can exchange the data (from Phonebook/Scheduler/ToDo lost/Notepad/My data(Videos/Sounds/Pictures/MP3)) between your
phone and other Bluetooth devices.
• FTP server - You can use your phone as a server while other Bluetooth devices function as a client. This enables the user to browse your phone
from other Bluetooth devices.
2 The list of the Bluetooth accessories recommended for N500i is available on NEC France’s website: http://www.nec.fr
2 When using Bluetooth devices, always refer to their operation manual.
2 Depending on the connection status, a Bluetooth device may not function correctly. In such a case, retry operation from the device side, or switch
your phone off and on.
2 There may be Bluetooth devices that cannot be connected to your phone.
Bluetooth setting
☛
801
No. Bluetooth setting
Bluetooth On/
Bluetooth Off
Activates or deactivates Bluetooth function.
2 If you switch the phone off while Bluetooth On is set, the next time you switch on, the phone will be in
Bluetooth On status again.
Pair new device
Registers the external Bluetooth devices.
1 Search device
Searches for the nearby active Bluetooth devices.
2 Wait for connect Standby your phone to wait for other devices to search for it.
2 Other Bluetooth devices can only detect your phone while your phone is displaying
Wait for connect screen.
Device list
Displays and edits the list of paired devices.
My phone
Displays the terminal information of your phone.
☛
to display the Options menu
Rename:
Edits the terminal name of your phone.
2 You cannot edit the information during Bluetooth communication.
78 Bluetooth (M80)
No. Bluetooth setting
Active device
Displays the information on the device in connection.
Disconnect
Ends the Bluetooth connection in progress.
2 Depending on the conditions, some options may be displayed in gray and not be available.
Device list Option menu
☛
801➔3
No. Device list Option menu
Rename
Edits the name of the highlighted device.
Protect/Unprotect
Protects or unprotects the highlighted device.
Delete device
Deletes the highlighted device.
Delete all devices
Deletes all the devices listed.
View detail
Displays detailed information on the highlighted device.
Device list icons
The following icons will be displayed in the device list screen.
Indicates the device is not registered.
Indicates the device is an audio (a headset
or handsfree device).
Indicates the device is a PC.
Indicates the device is a phone
Indicates the device is other than an audio,
PC, or phone.
Indicates the device is protected.
TBD Indicates the device is connected with
your phone.
Pairing a Bluetooth device and your phone
☛
8 0 1 ➔ 2 ➔ 1 to be searched by other Bluetooth devices or 2 to search other Bluetooth devices
☛ If the device is found, the list of found Bluetooth devices will be displayed
☛ Highlight the device from the list➔ ➔ Input passcode on each device
2 When pairing, enter a passcode specified by the Bluetooth device to your phone and the device. If no passcode is specified by the device, enter
the same arbitrary number to your phone and the device. A passcode is a number from 4 to 16 digits.
Bluetooth (M80) 79
Using Bluetooth for voice/modem
2 To use the Bluetooth headset/hands-free kit or Bluetooth modem, you must perform the Bluetooth pairing with your external device beforehand. For
details, refer to the operation manual of the device.
, While using the Bluetooth device, the following icons will be displayed in the status bar area of your phone.
Indicates that Bluetooth is set to on.
Indicates that Bluetooth is in operation.
Connecting Bluetooth headset/hands-free kit
2 When connecting a wired headset and Bluetooth headset at the same time, the wired headset will not work.
2 For some Bluetooth devices, the voice recall function may be activated when a paired headset/hands-free kit is turned on (see “Voice recall” on
☛
☛
☛
☛
☛
page 8).
Pair the Bluetooth device and your phone beforehand. See “Pairing a Bluetooth device and your phone” on page 79 for details.
8 0 1 ➔ 1 to toggle to Bluetooth On to activate Bluetooth ➔ 3 ➔ Highlight the headset/hands-free kit in the list ➔ SK1 or
Press the button on the headset/hands-free kit
To switch the headset/hands-free kit call to your handset call,
You cannot deactivate Bluetooth during a call.
To end the call, press or end from the headset/hands-free kit
Using your phone as Bluetooth modem
2 For details of dial-up connection settings, consult your Internet service provider.
☛ Pair the Bluetooth device and your phone beforehand. See “Pairing a Bluetooth device and your phone” on page 79 for details.
☛
8 0 1 ➔ 1 to toggle to Bluetooth On to activate Bluetooth ➔ Perform dial-up connection by your PC
☛ Activate Bluetooth function ➔ Perform dial-up connection by your PC.
☛ To end the dial-up connection, disconnect from the PC application
Bluetooth data exchange
2 The maximum size for exchanging data is 1 MB. If the data you are sending is larger than that, a message will be displayed indicating the error has
occurred.
2 You can only transfer one item per exchange.
Sending data
You can send the data from Phonebook/Scheduler/ToDo lost/Notepad/My data(Videos/Sounds/Pictures/MP3) between other Bluetooth devices.
80 Bluetooth (M80)
Phonebook entry (M413...)
2 You can only send Name, Home, Mobile, Work, Fax, 2 Email addresses and 2 pieces of descriptive information.
2 Your phone sends data according to the vCard 2.1 specification.
☛ To display the phonebook (Phone), (for required number of times) or
4 1 3 ➔ Highlight a phonebook entry.
☛
0 or
3 ➔ The phonebook entry will be sent through the IR port.
Video/Sound/Picture/MP3 (M6...)
☛
6 1 for Videos,
6 2 for Sounds,
6 3 for Pictures or
6 4 for MP3 ➔ Highlight a folder ➔
➔ Highlight a file.
☛
2 3 for Videos/Pictures,
2 4 for Sounds or
2 1 for MP3 ➔ The file will be sent through the IR port (see “My data (M6)” on
page 60 for details).
Schedule entry (M85...)
☛
8 5 ➔ Highlight a date ➔
➔ Highlight a schedule entry ➔
ToDo entry (M86...)
☛
8 6 ➔ Highlight Public, Private or All ➔
Note (M872...)
☛
8 7 2 ➔ Highlight a note ➔
➔
➔ Highlight a ToDo entry ➔
9 ➔ The schedule entry will be sent through the IR port.
7 ➔ The ToDo entry will be sent through the IR port.
2 and 2 ➔ The note entry will be sent through the IR port.
Receiving data
You can standby your phone to receive data for Phonebook/Scheduler/ToDo lost/Notepad/My data(Videos/Sounds/Pictures/MP3) between other
Bluetooth devices.
☛
8 0 2 ➔ Start sending data from the other end.
2 Once the transmission completes, your phone automatically judges the type of received data and stores the data accordingly.
2 If your phone does not have enough space to store the received data, a message will be displayed indicating lack of space. In such a case, delete
unnecessary data and try the data exchange again.
FTP server
Using Bluetooth connection, you can browse your phone from other Bluetooth devices and transfer data.
This function provides the following services:
• See the file/folder list in your phone.
• Send/receive the file/folder to/from your phone.
• Delete the file/folder from your phone.
• Create a folder in your phone.
Bluetooth (M80) 81
☛
8 0 2 ➔ the waiting data screen is displayed.
☛ Browse your phone from other Bluetooth device.
2 While using FTP server to receive the data from other Bluetooth devices, your phone can only accept the data for Notepad or My data (Videos,
Sounds, Pictures, MP3).
2 The connection from other Bluetooth devices is accepted only when the waiting data screen is displayed.
2 Depending on the security settings, the operations when the connection from other Bluetooth devices is accepted differs.
82 Bluetooth (M80)
Index
Numerics
2nd-LCD
3GPP
4 way navigation key
23
55
vi
AC adapter
Accepting an incoming call
Access history
Accessory
ADN
Alarm volume
ALS
Animation
Any key answer
AoC
Auto answer
Auto redial
47
68
48
22
20
62
20
11
22
13
Bar calls
Basic calls & phone use
Battery charging
Battery level icons
Battery pack
Bluetooth
Bookmark
25
viii, 4
78
47
Calculator
Call diversion
Call lists
Call options
70
12
11
10
Call transfer
Call waiting and holding
Camera
Recording a video
Taking a picture
Car mode
CB
Certificate information
CLI
Clock
Clock alarm
Clock selection
Clock/Event display
Colour style
Contrast
Correcting mistakes
Currency
13
55
58
56
21
33
47
5, 52
21
71
23
23
23
23
76
Date
Date format
Desktop icons
Dialled calls list
Download
21
21
18
11
34
Earphone setting
Earphone type
Emergency calls
Ending a call
22
21
Fast dialling
FDN
Flicker control
Fold answer
Frame
Frequency band
FTP server
Function key LED
25, 48
57, 60
20
63
15
81
24
General care
Greetings
Groups
GSM
39
33
39
27
23
14
47
23
50
viii, ix
Hands-free kit
Headset
Highlight mode
Holding a call
Homepage
i-mode menu screen
i-mode operations
i-mode screen
Inbox
Incoming call No.
International dialling codes
IP
78
21, 78
32
47
Icons
viii, 79, 80
i-mode
33
Certificate information
47
i-mode menu screen
39
i-mode operations
33
i-mode screen
39
IP
47
Mail
47
MMS
47
Site (program)
47
Web page
47
Java™
JPEG
67
55
Key allocations
Key tone
Keypad shortcuts
17
22
vii
Language
Last call duration
Last number redial
LCD
LED
Line ID
Low battery alarm
21
11
21
14
Mail
Mail screen
Mail server
Main menu
Main-LCD
Making basic calls
Meeting mode
47
43
39
xi
23
21
Index
83
Menu functions
Menu shortcuts selection
Message
MFi
Missed calls list
MMS
MMS messages
MMS tone
MMS tone volume
MP3 player
Multi-party calls
Music player
Mute
My data
MP3
Pictures
Sounds
Videos
xi
iv
27
46
11
47
27
22
22
69
68
60
64
62
61
61
Network selection
Normal mode
Normal text (ABC) input
Notepad
Number type
Numeric input
14
21
16
75
53
17
One-touch dial
Option mode
Origin number
Own phone number display
30
53
Parts and functions
Phone lock
84
Index
vi
25
Phone modes
Phonebook
PIM
PIN activate
PIN code
PIN2 code
Pocket mode
Power saving
Preparing the phone
PUK
21
48
25
25
5, 24
24
21
23
24
Reading a message
Received calls list
Receiving an incoming call
Recording a call
Redial blacklist
Rejecting an incoming call
Reset settings
Ring silencer
Ringer
Ringer volume
Roaming
28
11
10
11
25
20
22
22
14
Saved pages
Scheduler
Scratchpad number
SDN
Security
Security code
Service tone
Settings
Shortcuts selection
Side key lock
47
72
10
48
24
24
22
20
xi
20
SIM card
SIM card insertion
SIM card removal
Site (program)
SMS messages
SMS tone
SMS tone volume
Stamp
Standby and talk times
Standby screen
Starting a call
Start-up
STD
Streaming Proxy
Switching the phone off
Switching the phone on
Synchronization
47
27
22
22
62
39
77
View mode
Voice mail
Voice memo
Voice recall
Voice volume
31
54
76
20
Wallpaper
Web page
23
47
Zoom
57, 60
T9 English text input
Text entry
Mode change
Time
Time format
Timezone
ToDo list
Total calls duration
15
15
15
21
21
21
73
11
Unsuccessful calls
User’s manual conventions
iv
Vibrator
Video
Recording a video
22
55
58
1_00505

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:07:05 16:11:21-04:00
Create Date                     : 2005:05:16 15:59:59Z
Page Count                      : 101
Creation Date                   : 2005:05:16 15:59:59Z
Mod Date                        : 2005:07:05 16:11:21-04:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : k-kojima
Metadata Date                   : 2005:07:05 16:11:21-04:00
Creator                         : k-kojima
Title                           : Manual.book
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools