NEC of America LOBTCP BT-CRADLE ASSY(LB)BK User Manual cradlephone manual
NEC Corporation of America BT-CRADLE ASSY(LB)BK cradlephone manual
Users manual
BT-CRADLE ASSY(LB)BK Connecting Manual MODEL:LO(BTCP) ●Mounting Procedure Multifunction al telephone Stopper BT-CRADLE ASSY(LB)BK Connecting cable Insert the lug on the Multifunctional telephone unit into the hole in the BT-CRADLE ASSY(LB)BK. Slide the BT-CRADLE ASSY(LB)BK unit the stopper clicks into position. Insert the cradle connecting cable of the BT-CRADLE ASSY(LB)BK into the telephone unit connector. ●Usage ○ How to turn on/turn off the power supply of the BT-CRADLE ASSY(LB). ・ Multifunctional telephone is turned on. ・ The "Pair" button of a multifunctional telephone is pushed (for 2.5 to 7.5 seconds). Then,the power supply of the BT-CRADLE ASSY(LB) turns on. If the power supply of the BT-CRADLE ASSY(LB) turns on, Pair LED will blink in a cycle of 1 second. ・ When the BT-CRADLE ASSY(LB) is the power supply on.- The "Pair" button is pushed (2.5 seconds or more). Then, the BT-CRADLE ASSY(LB) turns off. ○ PairingMode ・ The BT-CRADLE ASSY(LB) is turned off- The "Pair" button is pushed (for 2.5 to 7.5 second). Then, it shifts to PairingMode. ・ If it shift to PairingMode, "Pair" LED will blink in a cycle of 0.2 second. Item Destination Radio interface Installed profiles Power consumption Power feeding Dimensions (L×W × H) Mass Operating environment Restrictions Specification Multifunctional telephone Bluetooth® version 2.0 +EDR Class1(1 to 2.5mW) ・HSP : Headset Profile・HFP : Hands Free Profile About 1 W (excluding the telephone) +2.97 to +3.6V(Power feeding from the multifunctional telephone) 220mm × 60mm × 90mm (excluding projections) About 1kg Temperature: 0 to 40℃ , Relative humidity: 10 to 90% (no dew condensing) Keep the BT-CRADLE ASSY(LB)BK at least 1m apart from other BT-CRADLE ASSY(LB)BK UNITs and at least 3m apart from other radio equipment. ※The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. a. FCC portion This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for product compliance could void the user's authority to operate the equipment. Caution: RF Exposure to radio frequency radiation To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. b. Industry Canada Portion Canada Regulatory Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada. For Customers in Canada This device complies with RSS 210 of Industry Canada (IC). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Caution: RF Exposure to radio frequency radiation To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 1127436090856 Create Date : 2011:09:13 09:19:36+09:00 Modify Date : 2011:10:04 15:58:29+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2011:10:04 15:58:29+09:00 Producer : Acrobat Distiller 9.2.0 (Windows) Format : application/pdf Title : cradlephone_manual.xls Creator : 1127436090856 Document ID : uuid:e7f8c20e-dc8a-49c3-b834-8350811dca84 Instance ID : uuid:84954792-dd2e-4876-a7b6-49d12d10f26a Page Count : 3EXIF Metadata provided by EXIF.tools