User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2620930 |
| Application ID | AZuBigymWJFYHU7DHkcRbA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 76.58kB (957205 bits) |
| Date Submitted | 2015-05-21 00:00:00 |
| Date Available | 2015-11-17 00:00:00 |
| Creation Date | 2015-04-01 16:03:49 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-04-21 19:14:36 |
| Document Title | Microsoft Word - NL-RF2200_FCC-ENGLISH MANUAL_141222.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | BCD5C1A4C8A3 |
NL-RF2200 UHF RFID Reader Hardware User's Manual 2014 www.nesslab.com RFID Reader Hardware User Guide Contents 1. Introduction 1.1 Overview 1.2 Composition 1.3 Reader Configuration 1.4 Reader Installation 1.5 Reader Physical Size 1.6 Specification 1.7 RS-232 & GPIO Interface 2. Antenna 2.1 Scope 2.2 Composition and Materials. 2.3 Mechanical Dimensions. 2.4 Electrical specifications. 3. FCC Information to User 4. WARNING TO USER 5. Reader, Anrenna Troubleshoot Guide RFID Reader Hardware User Guide 1. INTRODUCTION 1.1 Overview NL-RF2200 is a Fixed Type 900MHz RFID Reader, enables user to use RS232 or Ethernet Interface for efficient and convenient use. It is suitable for various applications such as Logistic, Asset tracking, Stock management, Parking lot management, Healthcare, Security, Transportation and bank system. User can use up to 4 antennas per one reader, perfect for wide range reading application than longer distance reading application. ◈ System configuration ◈ Network Tag #1 Tag #2 LAN PC RS-232 Tag #N 1.2 Composition Reader main body Antenna (Option) Instruction DC5V/5A adapter Antenna cable (Option) LAN Cable RFID Reader Hardware User Guide 1.3 Reader Configuration LED : Yellow – Ethernet cable connection indicator Green – Recognition of Ethernet cable and Tag Reading indicator Red – Power indicator ANT1 / ANT2 / ANT3 / ANT4 : Connecting antenna up to 4 using cable. DC5V : Using DC5V/3A adapter to supply power to RFID reader. RS-232 : To connect to PC or other device for data transmission or software upgrade. LAN : To connect to PC or other device for data transmission or software upgrade. RFID Reader Hardware User Guide 1.4 Reader Installation ◈ How to install or connect reader with antenna ◈ 1. Make the reader stay still. 2. Connect each cable in the package. ◈ Connect adapter with power supply code then connect adapter jack to main body. ◈ In case of use of multi connect or extension cable, avoid to exceed voltage(rated current) over than mentioned. ◈ When connection Antenna cable for each port, connect SMA Type connecter to main body and N Type connecter to Antenna. ◈ Connect LAN cable to main body LAN port for Ethernet communication. ◈ Connect RS-232 cable for serial communication checking with right direction of the connecter. ◈ How to install antenna correctly ◈ 1. Avoid metal material the front side of antenna in 2M due to cause of low performance. 2. Make the antenna stay still. 3. Antenna Cable per each ports should be not tangled and tied up. RFID Reader Hardware User Guide 1.5 Reader Physical Size ☞ unit: mm RFID Reader Hardware User Guide 1.6 Specification ITEM SPECIFICATION Model Number NL-RF2200 Operating Frequency 902.75 MHz ~ 927.25 MHz RF Output Port Hopping Channels 50 Channel Spacing 500 KHz Channel Dwell Time < 0.4 seconds Modulation Phase Reversal-Amplitude Shift Keying (PR-ASK) RF Transmitter < 1W (+30 dBm) Communication Interface RS-232 (DB-9F), TCP/IP (RJ-45) GPIO Support 2-Input / 2-Output Dimensions 107 x 98 x 32 mm Weight 430g Operating Temperature -10 ~ + 50 ℃ LED Indicators Link, ACT, Power Input Power DC 5.0V Power Consumption 12W Protocols Support ISO 18000-6 Type C/ EPC Class1-Gen2 Software Support Reader Manager (API) Compliance Certifications RFID Reader Hardware User Guide 1.7 RS-232 & GPIO Interface Pin NO. RS-232 Interface GPIO Interface (Option) Not Connected +3.3V Output Transmit Data Not Connected Receive Data Not Connected Not Connected I nput1 Ground Ground Not Connected Output1 Not Connected Output2 Not Connected I nput2 Not Connected +5V or +12V Output RFID Reader Hardware User Guide 2. Antenna 2.1 Scope This specification covers the characteristics of the ceramic patch antenna element for the ISM band 2.2 Composition and Materials. 1. Substrate : Air & Insulator 2. Electrode Plating : Copper & Aluninum 3. Terminal pin : Heat-resisting ABS 2.3 Mechanical Dimensions. ☞ unit: mm RFID Reader Hardware User Guide 2.4. Electrical specifications. NO. Parameters Spec. Typical value Unit Remark Center Frequency 919 Band Width @ - 10 dB R.L. 60 min. 80 MHz VSWR 2.0 : 1 max. 1.1 : 1 Ratio @919 MHz Gain @ Zenith 5.0 min. 5.0~6.0 dBiL @919 MHz Axial Ratio 3.0 1.5~2.0 dB @919 MHz Impedance 50 Ohms Polarization MHz RHCP 10 RFID Reader Hardware User Guide 3. FCC Information to User This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) the device may not cause interference, and (2) the device must accept any interference, including interference that may cause undesired operation of this device. 4. WARNING TO USER － Change or modifications not expressly approved the manufacturer can void the user's authority to operate this equipment. － This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment must be installed and operated with at least 20cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). 11 RFID Reader Hardware User Guide 5.Reader, Anrenna Troubleshoot Guide 5.1 Fixed Reader and Antenna Troubleshoot 1. Confirm the demage of the out case and the inundation. 1) check the external connector . 2) check the inundation .(Check the clearance of the reader) 2. Confirm the reader setup program. 1) The reader setup is the execution of the reader manager program 3. Confirm the error of the power. 1) Check the adaptor (The output power is 5v dc) 12 RFID Reader Hardware User Guide 2) Check the connection of the ac adapter to the reader. 3) Confirm the red LED of the reader 4) If the red LED is off, the power is not supplied. Check the connection of the ac power cord. Change the output of the ac/dc adapter. 4. Confirm the LAN connection. 1) Confim the yellow LED. 13 RFID Reader Hardware User Guide 2) If the yellow LED is off , the ethernet is not connected to the host PC. 3) Confirm the reader IP (The default IP of the reader is 192.168.10.91) 4) Confirm the host PC setting ( disable the other connection ) 14 RFID Reader Hardware User Guide 5. check the configuration of the reader. 1) check the antenna port at the reader manager configuration. 2) check the antenna power level and the antenna register. The antenna power level is 15dBm ~ 30dBm. The antenna register is 1000000 6. Check the antenna connection and the antenna opetration. 1) Check the antenna setting 15 RFID Reader Hardware User Guide 2) Check the antenna cable damages 3) Check the antenna damages. 7. Then ask the A/S center(+82-31-206-1774), if the reader is out of order after all that 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author :EXIF Metadata provided by EXIF.toolsCreate Date : 2015:04:01 16:03:49+09:00 Modify Date : 2015:04:21 19:14:36+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Title : Microsoft Word - NL-RF2200_FCC-ENGLISH MANUAL_141222.doc Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2015:04:21 19:14:36+09:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:02106f21-08c1-4830-91ee-397c234a729e Instance ID : uuid:45f4939b-b8ce-4eff-9c67-deb76bdeeef0 Page Count : 16