NETIS SYSTEMS 3GC101R 150Mbps Wireless-N 3G Broadband Router User Manual manual

NETIS SYSTEMS CO., LTD. 150Mbps Wireless-N 3G Broadband Router manual

manual

Download: NETIS SYSTEMS 3GC101R 150Mbps Wireless-N 3G Broadband Router User Manual manual
Mirror Download [FCC.gov]NETIS SYSTEMS 3GC101R 150Mbps Wireless-N 3G Broadband Router User Manual manual
Document ID1478392
Application IDEGSd2sy6DE3xNdwvkXu5DQ==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize206.26kB (2578311 bits)
Date Submitted2011-06-07 00:00:00
Date Available2011-06-07 00:00:00
Creation Date2011-06-03 03:37:48
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2011-06-03 16:34:32
Document Titlemanual
Document CreatorMicrosoft® Office Word 2007
Document Author: 微软用户

netis Wireless-N 3G Router
User Manual
V1.1
2011-06-02
Wireless-N 3G Router User Manual
Certification
FCC CE
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user‟s authority to operate this equipment. (Example- use
only shielded interface cables when connecting to computer or peripheral devices)
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution! The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user authority
to operate the equipment
1 / 69
Wireless-N 3G Router User Manual
Package Contents
The following items should be found in your package:

Wireless-N 3G Router

Power adapter

Quick Installation Guide
Make sure that the package contains above items. If any of the above items is missing or damaged,
please contact the store you bought this product from.
Brand and Copyright Announcement
Copyright © 2010 Netis Corporation.
All rights reserved
is a registered trademark of Netis Corporation. Other trademarks and trade
names may be used in this document to refer to either the entities claiming the marks and
names or their products.
Reproduction in any manner without the permission of Netis Corporation is strictly forbidden
All the information in this document is subject to change without notice.
2 / 69
Wireless-N 3G Router User Manual
Contents
1.
2.
3.
INTRODUCTION ................................................................................................................................... 6
1.1.
PRODUCT OVERVIEW ......................................................................................................................... 6
1.2.
MAIN FEATURES ............................................................................................................................... 6
1.3.
SUPPORTING STANDARD AND PROTOCOL ................................................................................................ 7
1.4.
WORKING ENVIRONMENT................................................................................................................... 7
HARDWARE INSTALLATION .................................................................................................................. 8
2.1.
SYSTEM REQUIREMENT ...................................................................................................................... 8
2.2.
PANEL ............................................................................................................................................ 8
2.3.
RESTORE TO FACTORY CONFIGURATION .................................................................................................. 9
2.4.
HARDWARE INSTALLATION PROCEDURES ............................................................................................... 10
LOGIN ................................................................................................................................................ 11
3.1.
4.
CONFIGURE COMPUTER ................................................................................................................... 11
3.1.1.
Windows 98/Me ................................................................................................................ 11
3.1.2.
Windows 2000................................................................................................................... 12
3.1.3.
Windows XP ...................................................................................................................... 15
3.1.4.
Windows Vista/7 ............................................................................................................... 18
3.1.5.
MAC OS ............................................................................................................................. 22
3.2.
CHECKING CONNECTION WITH THE ROUTER .......................................................................................... 24
3.3.
LOGIN .......................................................................................................................................... 25
SYSTEM CONFIGURATION .................................................................................................................. 27
4.1.
CONVENIENT SETUP ........................................................................................................................ 27
4.1.1.
DHCP user (Cable Modem) ................................................................................................. 27
4.1.2.
PPPoE user (ADSL).............................................................................................................. 28
4.1.3.
Static User ......................................................................................................................... 29
4.1.4.
PPTP Client + DHCP ............................................................................................................ 30
4.1.5.
3G User ............................................................................................................................. 31
4.1.6.
Wireless Configuration....................................................................................................... 31
4.2.
SYSTEM INFORMATION ..................................................................................................................... 32
4.2.1.
Internet Access .................................................................................................................. 32
4.2.2.
LAN Info ............................................................................................................................ 33
4.2.3.
Wireless Info...................................................................................................................... 34
4.2.4.
Secondary AP..................................................................................................................... 34
4.2.5.
System............................................................................................................................... 35
4.2.6.
Statistics ............................................................................................................................ 35
4.3.
SYSTEM LOG .................................................................................................................................. 36
4.3.1.
Connection Logs ................................................................................................................ 36
4.3.2.
3G Logs ............................................................................................................................. 36
3 / 69
Wireless-N 3G Router User Manual
4.4.
INTERNET SETUP............................................................................................................................. 36
4.4.1.
DHCP User (Cable Modem) ................................................................................................ 37
4.4.2.
PPPoE user (ADSL).............................................................................................................. 38
4.4.3.
Static user ......................................................................................................................... 39
4.4.4.
PPTP Client + DHCP ............................................................................................................ 40
4.4.5.
3G User ............................................................................................................................. 41
4.5.
WIRELESS MANAGEMENT ................................................................................................................. 42
4.5.1.
4.5.1.1.
Basic ........................................................................................................................................... 42
4.5.1.2.
Security....................................................................................................................................... 43
4.5.1.3.
WDS............................................................................................................................................ 46
4.5.1.4.
Host Filter ................................................................................................................................... 48
4.5.1.5.
Host List ...................................................................................................................................... 48
4.5.1.6.
WPS ............................................................................................................................................ 49
4.5.1.7.
Advanced .................................................................................................................................... 50
4.5.1.
4.6.
Wireless Setup ................................................................................................................... 42
Multiple AP Setup .............................................................................................................. 51
4.5.1.1.
Basic ........................................................................................................................................... 52
4.5.1.2.
Security....................................................................................................................................... 52
4.5.1.3.
Host List ...................................................................................................................................... 52
SECURITY SETUP ............................................................................................................................. 52
4.6.1.
MAC Filter ......................................................................................................................... 53
4.6.2.
Internet Access Control ...................................................................................................... 54
4.6.3.
DNS Filter .......................................................................................................................... 55
4.7.
QOS SETUP .................................................................................................................................. 56
4.8.
LAN SETUP ................................................................................................................................... 57
4.8.1.
LAN IP Address .................................................................................................................. 57
4.8.2.
DHCP Server ...................................................................................................................... 57
4.8.3.
DHCP Client Info ................................................................................................................ 58
4.9.
APPLICATIONS & GAME.................................................................................................................... 58
4.9.1.
Virtual Service ................................................................................................................... 59
4.9.2.
DMZ Setting ...................................................................................................................... 60
4.9.3.
UPNP................................................................................................................................. 60
4.9.4.
Port Trigger ....................................................................................................................... 61
4.10.
APPLICATION GATEWAY .................................................................................................................... 61
4.11.
DDNS ......................................................................................................................................... 62
4.12.
ROUTING ...................................................................................................................................... 63
4.13.
SYSTEM MANAGEMENT ................................................................................................................... 63
4.13.1.
Password Setup ................................................................................................................. 64
4.13.2.
Web Setup ......................................................................................................................... 64
4.13.3.
Upgrade ............................................................................................................................ 64
4.13.4.
Reboot............................................................................................................................... 65
4.13.5.
Restore .............................................................................................................................. 65
4 / 69
Wireless-N 3G Router User Manual
5.
4.13.6.
WOL .................................................................................................................................. 65
4.13.7.
System Time ...................................................................................................................... 65
TROUBLESHOOTING........................................................................................................................... 67
5 / 69
Wireless-N 3G Router User Manual
1. Introduction
1.1. Product Overview
The Wireless-N 3G Router supplies multiple routers, including 150Mbps router, 150Mbps traveler
router, 300Mbps router etc. The Wireless-N 3G Router is a multi-function wireless broadband router.
When connecting a 3G USB card to it, all network (wired/wireless) users can share 3G Internet
connection. The Wireless-N 3G Router can support 3G speeds up to 7.2Mbps and comes with a
built-in Ethernet WAN port for cable modem or xDSL modem. When connected to a xDSL/cable
broadband, it will enable the xDSL/cable broadband connection automatically when 3G Internet
connection is not available.
The Wireless-N 3G Router provides up to 150/300Mbps data transmission rate in 2.4GHz frequency,
complies with IEEE 802.11n, IEEE 802.11g and IEEE802.11b and backwards compatible with all
IEEE 802.11n/g/b devices. And the router also supports wireless LAN up to 128-bit WEP,
WPA/WPA2 encryption security. The Wireless-N 3G Router also provides WEB and Remote
Management and system log so that network administrators can manage and monitor the network in
real time.
The Wireless-N 3G Router also provides a hardware WPS (Wi-Fi protected setup) button, which
helps you setup a secure wireless network in a snap. The button lets you activate the wireless
protection easily
In this User Manual, if there is no specific instruction, we all use 3G-C101 for example
1.2. Main Features

Support 3G network card

Support up to 150Mbps wireless data transmit rate

Fully compliant with IEEE802.3 10 Base-T, IEEE802.3u 100 Base-TX, IEEE802.3ab

Support DHCP Client, PPPoE Client, Static IP

Support MAC filtering, IP access control, DNS filter

Support PPTP 、 L2TP and IPSEC pass through

Support UPNP (universal plug and play)
6 / 69
Wireless-N 3G Router User Manual

Upgradeable firmware for future functions

WPS button can setup a secure network easily

Support data encryption mode: WEP, WPA, WPA2

Support multiple BSSID

Support DMZ
1.3. Supporting Standard and Protocol

IEEE 802.11b/g/n

IEEE 802.11e, IEEE 802.11i

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
1.4. Working Environment
Temperature

0° to 40° C (operating)

-40° to 70° C (storage)
Humidity

10% to 90 % non-condensing (operating)

5% to 90% non-condensing (storage)
Power

DC 5V
7 / 69
Wireless-N 3G Router User Manual
2. Hardware Installation
2.1. System Requirement
Minimum Requirements:

Broadband (DSL/Cable) modem and service with Ethernet port

802.11n b/g/n wireless adapter or Ethernet adapter and cable for each computer

Internet Explorer® 5.0, Firefox® 2.0 or Safari® 1.4 or higher
2.2. Panel
Front panel
Figure 2-1
LED
PWR
CPU
USB
WAN
Function
ON
Power on
OFF
Power off
ON
System Start
Flashing
Normal
OFF
System OFF
ON
USB card connection normal
OFF
USB card connection abnormal
ON
WAN Connection normal
Flashing
OFF
Data transmitting
WAN Connection abnormal
8 / 69
Wireless-N 3G Router User Manual
LAN Connection normal
ON
LAN1-LAN4
Flashing
OFF
LAN Connection abnormal
Flashing
Wireless data transmitting
WLAN
Wireless off
OFF
Flashing
WPS
Data transmitting
WPS is running
slowly
OFF
WPS is not running
Rear panel
Figure 2-2
Description
PWR port
Function
Connect to Power adapter, please don‟t use the unknown
power adapter, otherwise your device may be damaged.
PWR
Turn on /off the router
USB
3G card is connected to this
port
LAN port
Connect with computer NIC or Ethernet device
WAN port
Internet access
WPS
Please refer to WPS
2.3. Restore to Factory Configuration
If the router ever freezes in a setting change process or if you can‟t access it because you can‟t
remember the IP you have given it or other problem, you may have to utilize the reset button on the
back of the router to put it back to factory settings. You have to press and hold this button for a few
seconds (2-6s) with a pencil when it is working, then release and it will restore settings to the factory
configuration.
The other way to restore factory settings is through the same user interface used in setup. Click on
9 / 69
Wireless-N 3G Router User Manual
„System management‟- „Restore‟, and click on the „Restore‟ button.
2.4. Hardware Installation Procedures
Figure 2-3

Attach one end of an Ethernet cable to your computer‟s Ethernet port, and the other end to one of
the LAN ports of your router.

Connect another Ethernet cable from your Cable/DSL modem to the WAN port of your router.

Connect the single DC output connector of the power adapter to the power jack on the back of
the router and plug the Power Adapter into an AC outlet.
10 / 69
Wireless-N 3G Router User Manual
3. Login
You can manage the Wireless-N 3G Router through the Web browser-based configuration utility.
To configure the device via Web browser, at least one properly configured computer must be
connected to the device via Ethernet or wireless network. The Wireless-N 3G Router is configured
with the default IP address of 192.168.1.1 and subnet mask of 255.255.255.0 and its DHCP server
is enabled by default. Before setting up the Router, make sure your PCs are configured to obtain an
IP address automatically from the Router by the steps below.
3.1. Configure Computer
3.1.1. Windows 98/Me
1. Go to Start  Settings  Control Panel.
2. Find and double-click the Network icon. The Network dialog box appears.
3. Click the Configuration label and ensure that you have network card.
4. Select TCP/IP. If TCP/IP appears more than once, please select the item that has an arrow “”
pointing to the network card installed on your computer. DO NOT choose the instance of TCP/IP with
the words “Dial Up Adapter” beside it.
5. Click Properties. The TCP/IP Properties dialog box appears.
6. Ensure the Obtain IP Address Automatically is checked.
7. From the WINS Configuration dialog box, Ensure that Disable WINS Resolution is checked.
8. From the Gateway dialog box, remove all entries from the Installed gateways by selecting them and
clicking Remove.
9. From the DNS Configuration dialog box, remove all entries from the DNS Server Search Order
box by selecting them and clicking Remove. Remove all entries from the Domain Suffix Search
Order box by selecting them and clicking Remove. Click Disable DNS.
10. Click OK, back to Network Configuration dialog box
11. Click OK, if prompted to restart, click YES.
11 / 69
Wireless-N 3G Router User Manual
3.1.2. Windows 2000
Please follow the steps below to setup your computer:
1. Go to Start  Settings  Control Panel
Figure 3-1
2. Double click the icon Network and Dial-up Connections
3. Highlight the icon Local Area Connection, right click your mouse, and click Properties
12 / 69
Wireless-N 3G Router User Manual
Figure 3-2
4. Highlight Internet Protocol (TCP/IP), and then press Properties button
Figure 3-3
5. Choose Obtain an IP address automatically and Obtain DNS server address automatically, and then
press OK to close the Internet Protocol (TCP/IP) Properties window
13 / 69
Wireless-N 3G Router User Manual
Figure 3-4
6. Press OK to close the Local Area Connection Properties window
Figure 3-5
14 / 69
Wireless-N 3G Router User Manual
3.1.3. Windows XP
Please follow the steps below to setup your computer:
1. Go to Start  Settings  Control Panel
2. Click Network and Internet Connections
Figure 3-6
3. Click Network Connections
Figure 3-7
4. Highlight the icon Local Area Connection, right click your mouse, and click Properties
15 / 69
Wireless-N 3G Router User Manual
Figure 3-8
5. Highlight Internet Protocol (TCP/IP), and then press Properties button
Figure 3-9
6. Choose Obtain an IP address automatically and Obtain DNS server address automatically, and then
press OK to close the Internet Protocol (TCP/IP) Properties window
16 / 69
Wireless-N 3G Router User Manual
Figure 3-10
7. Press OK to close the Local Area Connection Properties window
Figure 3-11
17 / 69
Wireless-N 3G Router User Manual
3.1.4. Windows Vista/7
Please follow the steps below to setup your computer:
1. Go to Start  Settings  Control Panel
2. Click Network and Sharing Center
Figure 3-12
3. Click Manage Network Connections
Figure 3-13
4. Highlight the icon Local Area Connection, right click your mouse, and click Properties
18 / 69
Wireless-N 3G Router User Manual
Figure 3-14
5. Highlight Internet Protocol Version 4 (TCP/IP) and then press Properties button
19 / 69
Wireless-N 3G Router User Manual
Figure 3-15
6. Choose Obtain an IP address automatically and Obtain DNS server address automatically, and then
press OK to close the Internet Protocol (TCP/IP) Properties window
20 / 69
Wireless-N 3G Router User Manual
Figure 3-16
7. Press OK to close the Local Area Connection Properties window
21 / 69
Wireless-N 3G Router User Manual
Figure 3-17
3.1.5. MAC OS
Please follow the steps blow to setup your computer:
1.
Go to Start→ System preference Settings→ Network.
22 / 69
Wireless-N 3G Router User Manual
Figure 3-18
2.
Click Network, Select Use DHCP at the Configuration bar, the system will get the IP address
automatically.
Figure 3-19
23 / 69
Wireless-N 3G Router User Manual
3.
Press Apply to complete this operation and close the window.
3.2. Checking Connection with the Router
After configuring the TCP/IP protocol, use the ping command to verify if the computer can
communicate with the Router. To execute the ping command, open the DOS window and Ping the IP
address of the Wireless-N 3G Broadband Router at the DOS prompt:

For Windows 98/Me: Start -> Run. Type command and click OK.

For Windows 2000/XP: Start -> Run. Type cmd and click OK.

For Windows Vista/7:Start→ Type cmd at the start search bar and press the Enter.

For MAC OS→ The system will complete this operation automatically.
At the DOS prompt, type the following command:
The Command window should return something similar to the following:
C:\Documents and Settings\admin>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=1ms TTL=64
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
If the computer fails to connect to the router, the Command window will return the following:
C:\Documents and Settings\admin>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
24 / 69
Wireless-N 3G Router User Manual
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
Verify your computer's network settings are correct and check the cable connection between the
router and the computer.
3.3. Login

Open a web browser (Safari, Internet Explorer, etc.) on the computer you have just connected to
the router, type http://192.168.1.1 in the address bar, and press enter
Figure 3-20

In the pop-up window, enter the user name guest and password guest and then click OK
25 / 69
Wireless-N 3G Router User Manual
Figure 3-21

Login successfully and the home page appears, the left navigation bar shows the main options to
configure the system, the right screen is the summary information for viewing the configurations.
Figure 3-22
26 / 69
Wireless-N 3G Router User Manual
4. System Configuration
4.1. Convenient Setup
Providing you the convenient and simplest method for configure the router, the purpose of this item is
to provide an easy way for you to use it and configure your router to access the Internet quickly;
including „DHCP‟, „PPPoE‟, „Static IP‟, „PPTP Client + DHCP‟, „3G user‟ and „Wireless
Configuration‟. This is the most convenient tool for you to configure router.
4.1.1.
DHCP user (Cable Modem)
Figure 4-1
After select this item, you will obtain an IP address from your ISP automatically, those ISP who
supply Cable modem always use DHCP technology.
27 / 69
Wireless-N 3G Router User Manual
4.1.2.
PPPoE user (ADSL)
Figure 4-2
If your ISP provides you the PPPoE service (all ISP with DSL transaction will supply this service,
such as the most popular ADSL technique), please select this item. In the “Convenient configuration”
You can input your PPPoE username and password to access the Internet.

PPPoE username: Input PPPoE username provided by ISP

PPPoE Password: Input PPPoE password provided by ISP.
28 / 69
Wireless-N 3G Router User Manual
4.1.3.
Static User
Figure 4-3
This item should only be used when users use a static IP address to access Internet, you should input
your “WAN IP address”, ”subnet mask”,” default gateway” and “DNS server (domain name server)
IP address” according to the information provided by your ISP. And every IP address should be input
in appropriate IP field, a IP address only divided into four IP octets by sign”.” is acceptable.

WAN IP address: The IP address that your Internet access into

Subnet mask: Specify a Subnet Mask for your WAN segment

Default gateway: It is provided by your ISP

Primary DNS: DNS server is used for resolve domain name. Your ISP will provides you with at
least one DNS IP address, input IP address of your DNS server in this field

Secondary DNS: Input IP address of backup DNS server, or you can leave this field blank.
29 / 69
Wireless-N 3G Router User Manual
4.1.4.
PPTP Client + DHCP
Figure 4-4
This item should be used when users use a PPTP client as well as a DHCP to access Internet, you
should input the information that you get from your ISP
30 / 69
Wireless-N 3G Router User Manual
4.1.5.
3G User
Figure 4-5

ISP: Select ISP of your 3G card

3G card type: Select your 3G card type
4.1.6.
Wireless Configuration
Figure 4-6
You can choose “Enable” or “Disable” to enable or disable the wireless function. The default setting
is “enable”. If you chose the “Disable” status, the router will become a wired broadband router
without wireless function, so be careful when you choose this status.

SSID: SSID (Service Set Identifier) is your wireless network's name shared among all points in a
31 / 69
Wireless-N 3G Router User Manual
wireless network. The SSID must be identical for all devices in the wireless network. It is
case-sensitive and must not exceed 32 characters.
4.2. System Information
This page indicate current status of the router, including „Internet Access‟, „LAN Info‟, „Wireless
Info‟, „Secondary AP‟, „System‟ and „Statistics‟ about the bits router send and received .This item is
used for monitor the current status of router for administrator, and also supplies help information
about judge working situation of router
4.2.1.
Internet Access
Figure 4-7
This feature provides running status information of the WAN port (the port connect to the Internet)

Connection Type: Display router‟s current connection type, it depends on what kind of
connection type your ISP provides.

Physical Address: The physical address of WAN port, this is a unique address assigned by
manufacturer.

IP Address: The IP address you obtained after connect to the Internet, if you haven‟t connected
to the Internet yet, this field is 0.0.0.0.

Subnet Mask: The Subnet mask you obtained after connect to the Internet, if you haven‟t
connected to Internet yet, this field is 0.0.0.0

Default Gateway: The IP address of Default gateway you obtained after connect to the Internet,
32 / 69
Wireless-N 3G Router User Manual
if you haven‟t connected to Internet yet, this field is 0.0.0.0.

Primary DNS: The DNS server translates domain or website names into IP address, input the
most common DNS server address you used or provided by your ISP.

Secondary DNS: Input IP address of a backup DNS server or you can leave this field blank

MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size
permitted for network transmission. Most DSL users should use the value 1492.You can set
MTU manually, and you should leave this value in the 1200 to 1500 range. If the value you set is
not in accord with the value ISP provide, it may causes some problems, such as fail to send Email,
or fail to browse website. So if that happen, you can contact your ISP for more information and
correct your router‟s MTU value

Current version: The version information of your current firmware
4.2.2.
LAN Info
Figure 4-8
This item provides information about router‟s LAN port, display LAN port‟s physical address, IP
address and current situation of DHCP server.
33 / 69
Wireless-N 3G Router User Manual
4.2.3.
Wireless Info
Figure 4-9
This item provides current running information of wireless.

Wireless status: Display wireless interface status is enabled or not

Wireless Mode: Current wireless mode of wireless router

Channel: Display current channel of your wireless router.

SSID: SSID (Service Set Identifier) is your wireless network's name shared among all points in a
wireless network.

Wireless Interface MAC Address: The MAC address is used for wireless communication

SSID Broadcasting: You can select “enable” or “disable” to enable or disable the broadcast
SSID function, If the setting of this field is disable, wireless client can‟t obtain this SSID to login
in, then user have to input the SSID value manually

Security Mode: Display whether your security wireless function have been applied.
4.2.4.
Secondary AP
Figure 4-10
34 / 69
Wireless-N 3G Router User Manual
This item provides current running information of Secondary AP

Wireless status: Display wireless interface status is enabled or not

Wireless Mode: Current wireless mode of wireless router

Channel: Display current channel of your wireless router.

SSID: SSID (Service Set Identifier) is your wireless network's name shared among all points in a
wireless network.

Wireless Interface MAC Address: The MAC address is used for wireless communication

SSID Broadcasting: You can select “enable” or “disable” to enable or disable the broadcast
SSID function, If the setting of this field is disable, wireless client can‟t obtain this SSID to login
in, then user have to input the SSID value manually

Security Mode: Display whether your security wireless function have been applied.
4.2.5.
System
Figure 4-11
This item provides current running information of System
4.2.6.
Statistics
Figure 4-12
This item provides statistics information about the bits router sends and received
35 / 69
Wireless-N 3G Router User Manual
4.3. System Log
4.3.1.
Connection Logs
Figure 4-13
Examine system log, there are most ten logs can be showed in one Page
4.3.2.
3G Logs
Figure 4-14
Display 3G connection logs. You can configure items show in every single page
4.4. Internet Setup
The purpose of this item is to provide an easy way for you to use it and configure your router to access
the Internet quickly
36 / 69
Wireless-N 3G Router User Manual
4.4.1.
DHCP User (Cable Modem)
After select this item, you will obtain an IP address from your ISP automatically, those ISP who
supply Cable modem always use DHCP
Figure 4-15

Clone MAC address: The WAN port of router has a unique MAC address assigned by
manufacturer; it called as “Default MAC”. The “Clone MAC” is used for some special situations;
For example, ISP only allows certain MAC address to access the Internet, thus you can modify
your WAN port‟s MAC address in accord with the requirement of ISP, avoiding ISP‟s detection

MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size
permitted for network transmission. Most DSL users should use the value 1492.You can set
MTU manually, and you should leave this value in the 1200 to 1500 range. If the value you set is
not in accord with the value ISP provide, it may causes some problems, such as fail to send Email,
or fail to browse website. So if that happened, you can contact your ISP for more information and
correct your router‟s MTU value

Primary DNS: DNS server is used for resolve domain name. Your ISP will provide you with at
least one DNS IP address, input IP address of your DNS server in this field

Secondary DNS: Input IP address of backup DNS server or you can leave this field blank
37 / 69
Wireless-N 3G Router User Manual
4.4.2.
PPPoE user (ADSL)
Figure 4-16
If your ISP provides you the PPPoE service (all ISP with DSL transaction will supply this service,
such as the most popular ADSL technique), please select this item. In the “Convenient Setup” You
can input your PPPoE username and password to access the Internet

PPPoE username: Input PPPoE username provided by ISP

PPPoE Password: Input PPPoE password provided by ISP

Default MAC Address: The MAC address of WAN port, this is a fixed, unique address assigned
by manufacturer

MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size
permitted for network transmission. Most DSL users should use the value 1492.You can set
MTU manually, and you should leave this value in the 1200 to 1500 range. If the value you set is
not in accord with the value ISP provide, it may causes some problems, such as fail to send Email,
or fail to browse website. So if that happened, you can contact your ISP for more information and
correct your router‟s MTU value

Primary DNS: DNS server is used for resolve domain name. Your ISP will provide you with at
least one DNS IP address, input IP address of your DNS server in this field
38 / 69
Wireless-N 3G Router User Manual

Secondary DNS: Input IP address of backup DNS server, or you can leave this field blank
You can select three modes: connect to Internet automatically (Default), auto disconnect when idle or
time out, connect to Internet manually
4.4.3.
Static user
Figure 4-17
This should be used only you are connecting through a static IP address. You should input your
“WAN IP address”, ”subnet mask”,” default gateway” and “DNS server (domain name server) IP
address” according to the information provided by your ISP. And IP address input should be filled in
appropriate IP field, a IP address only divided into four IP octets by sign”.” is acceptable

WAN IP address: The IP address that your Internet access into

Subnet mask: Specify a Subnet Mask for your WAN segment

Default gateway: It is provided by your ISP

Clone MAC address: The WAN port of router has a unique MAC address assigned by
manufacturer; it called as “Default MAC”. The “Clone MAC” is used for some special situations;
For example, ISP only allows certain MAC address to access the Internet, thus you can modify
your WAN port‟s MAC address in accord with the requirement of ISP, avoiding ISP‟s detection

MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size
permitted for network transmission. Most DSL users should use the value 1492.You can set
39 / 69
Wireless-N 3G Router User Manual
MTU manually, and you should leave this value in the 1200 to 1500 range. If the value you set is
not in accord with the value ISP provide, it may causes some problems, such as fail to send Email,
or fail to browse website. So if that happened, you can contact your ISP for more information and
correct your router‟s MTU value

Primary DNS: DNS server is used for resolve domain name. Your ISP will provides you with at
least one DNS IP address, input IP address of your DNS server in this field

Secondary DNS: Input IP address of backup DNS server, or you can leave this field blank.
4.4.4.
PPTP Client + DHCP
Figure 4-18

Server: Enter server IP address

User ID: Input user ID

Password: Input: password

Clone MAC address: The WAN port of router has a unique MAC address assigned by
manufacturer; it called as “Default MAC”. The “Clone MAC” is used for some special situations;
40 / 69
Wireless-N 3G Router User Manual
For example, ISP only allows certain MAC address to access the Internet, thus you can modify
your WAN port‟s MAC address in accord with the requirement of ISP, avoiding ISP‟s detection

MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size
permitted for network transmission. Most DSL users should use the value 1492.You can set
MTU manually, and you should leave this value in the 1200 to 1500 range. If the value you set is
not in accord with the value ISP provide, it may causes some problems, such as fail to send Email,
or fail to browse website. So if that happened, you can contact your ISP for more information and
correct your router‟s MTU value

Primary DNS: DNS server is used for resolve domain name. Your ISP will provides you with at
least one DNS IP address, input IP address of your DNS server in this field

Secondary DNS: Input IP address of backup DNS server, or you can leave this field blank.
4.4.5.
3G User
Figure 4-19`

ISP: Select ISP of your 3G card

3G card type: Select the 3G card type that you are using
41 / 69
Wireless-N 3G Router User Manual

User name & password: Input username and password

Primary DNS: DNS server is used for resolve domain name. Your ISP will provides you with at
least one DNS IP address, input IP address of your DNS server in this field

Secondary DNS: Input IP address of backup DNS server, or you can leave this field blank.
4.5. Wireless Management
4.5.1.
Wireless Setup
It contains the following parts: Basic, Security, WDS, Host Filter, Host List, WPS and Advanced
4.5.1.1.
Basic
Providing basic configuration items for wireless router users, including ”wireless network
status”, ”Radio Band”, ”Radio Mode”, ”SSID”, ”SSID broadcasting”, ”Channel width”, “Region”
and ”Channel” basic configuration items.
Figure 4-20

Wireless network status: You can choose “enable” or “disable” to enable or disable the “Wireless
Network Status”, if what you choose is “Disable”, the AP function of wireless router will be
turned off

Radio band: You can select the wireless standards running on your network, if you have
Wireless-N, and Wireless-B/G devices in your network, keep the default setting, 802.11b+g+n
42 / 69
Wireless-N 3G Router User Manual

Radio mode: You can select radio mode of wireless router, the default setting is AP mode

SSID: The default is default

SSID Broadcasting: You can select “enable” or “disable” to enable or disable the broadcast SSID
function, If the setting of this field is disable, wireless client can‟t obtain this SSID to login in,
then user have to input the SSID value manually

Channel width: This switch allows you to set Router's wireless bandwidth. 20MHz: In this mode
you can get low bandwidth, little interference and slow rate. 40MHz: In this mode you can get
high bandwidth, high interference and rapid rate. Use only when you have a pure router, draft
802.11n wireless network

Channel sideband: It controls your wireless router use higher or lower channel when working on
40MHz

Region: You can select the region where you live in

Channel: In 20MHz, you can select one channel from 1 to 14 manually, and in 40MHz, you can
select one channel from 1 to 9 or 5 to 13, which provides a choice of avoiding interference
4.5.1.2.
Security
The item allows you to encrypt your wireless communication, and you can also protect your wireless
network from unauthorized user access. It supplies “None”, “WEP”, “WPA-PSK”, “WPA2-PSK”
and “WPA/WPA2-PSK” five different encryption modes.

None
“None”means do not encrypt wireless data
Figure 4-21

WEP
43 / 69
Wireless-N 3G Router User Manual
Figure 4-22

Key Length: There are two basic levels of WEP encryption, 64 bits and 128 bits, the more bits
password have, the better security wireless network is, at the same time the speed of wireless is
more slower.

Key Mode: If you select WEP to encrypt your data, choose the bits of password, it should be
64 bits or 128 bits. Then choose the format of password; it should be HEX or ASCII. The valid
character for HEX format should be numbers from 0 to 9 and letters from A to F. HEX support
mixed letter and number mode. And ASCII supports all characters that in keyboard.

Key Length description: When you select 64bits, you need to input 10 chars for HEX and 5
chars for ASCII, and when you select 128bits, you need to input 26 chars for HEX and 13
chars for ASCII.
Note: When the WPS is enabled, please not use WEP.

WPA-PSK
Figure 4-23

Encryption type: You can select the algorithm you want to use, TKIP, AES or TKIP&AES.
44 / 69
Wireless-N 3G Router User Manual
TKIP means “Temporal Key Integrity Protocol”, which incorporates Message Integrity Code
(MIC) to provide protection against hackers. AES, means “Advanced Encryption System”,
which utilizes a symmetric 128-Bit block data.

Key Renewal: you can configure the renewal time between 60 to 86400 seconds.

Key Length description: you need to input 8 to 63 ASCII characters no matter which type you
select.

WPA2-PSK
Figure 4-24
The WPA2-PSK is similar to WPA-PSK and with stronger encryption method than WPA-PSK, using
WPA2-PSK; you should input password (leave this value in the range of 8 to 63 characters) and key
renewal time (leave this value in the range of 60 to 86400 seconds).

WPA/WPA2-PSK
Figure 4-25
This item mixed WPA-PSK and WPA2-PSK mode, which provides higher security level; you can
45 / 69
Wireless-N 3G Router User Manual
configure it according with WPA-PSK or WPA2-PSK
4.5.1.3.
WDS
Figure 4-26
If you have selected WDS or AP+WDS mode in Wireless Basic-Radio Mode, please do the following
configurations

WDS Name: Give a description of your wireless bridge to tell apart

WDS MAC Address: If the current working mode is “WDS” or “AP+WDS”, then you need to
configure wireless bridge configuration. Enter MAC address of remote access point, at the
same time the remote access point also need to configure to “WDS” or ”AP+WDS” mode

Current WDS Information: It illustrates basic information of all wireless bridge that in
connection status, you may delete unnecessary bridge.
AP1:
46 / 69
Wireless-N 3G Router User Manual

Select radio mode is WDS or AP+WDS in wireless management-basic of AP1.

Click on „Wireless Management‟- „AP Setup‟- „Security‟ and select and save None as
authentication type.

Click on „Wireless Management‟- „AP Setup‟- „Security‟ and select and save None as WDS
authentication type or select a WDS security type, enter key and save.

Input WDS name (e.g.: default), input MAC address of AP2 (00-22-4f-bc-af-5d), click add,
then the record named default will appears in WDS list.

Select Channel is „Channel 6‟in wireless management-basic of AP2.
AP2:

Select radio mode is WDS or AP+WDS in wireless management-basic of AP2.

The IP address of AP2 should be 192.168.1.x (1
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:06:03 03:37:48Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2011:06:03 16:34:32+08:00
Metadata Date                   : 2011:06:03 16:34:32+08:00
Format                          : application/pdf
Creator                         : 微软用户
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:ba38fa09-b6f8-42c3-9c2c-5e35266c0ff9
Instance ID                     : uuid:f1a626c7-5415-4e02-8fb1-99127be6de9e
Page Count                      : 69
Language                        : zh-CN
Author                          : 微软用户


EXIF Metadata provided by EXIF.tools
FCC ID Filing: T583GC101R

Navigation menu