NETIS SYSTEMS WF2416R 150Mbps Wireless N Portable Router User Manual PKUM05176 WF2416 QIG

Download:
Mirror Download [FCC.gov]
Document ID	2130132
Application ID	PXHHCK1EqcnDvGo2RjtlZA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	110.04kB (1375483 bits)
Date Submitted	2013-11-28 00:00:00
Date Available	2013-11-28 00:00:00
Creation Date	2013-08-01 16:44:45
Producing Software	Corel PDF Engine Version 15.2.0.686
Document Lastmod	2013-08-01 16:44:45
Document Title	PKUM05176 WF2416-QIG .cdr
Document Creator	CorelDRAW X5
Document Author:	Administrator

150Mbps Wireless N Portable Router Quick Installation Guide
1.Package Contents
netis 150Mbps WirelessN PortableRouter
Quick InstallationGuide
WF2416
150Mbps Wireless N Portable Router Quick Installation Guide
150Mbps Wireless N Portable Router Quick Installation Guide
150Mbps Wireless N Portable Router Quick Installation Guide
3.Typical Applications
(3)WISP Mode
4.Router Configurations
(1)AP Router Mode(Default mode)
The WF2416 is connected wirelessly to an ISP's Wi-Fi Station, acting
as a gateway and sharing the Internet access to multiple devices.
Step 1 Connecting your computer to WF2416 wirelessly.
The WF2416 can be connected to a DSL or cable modem and works
as a regular wireless router.
Please click on the “Wireless Network Connection” icon (for Windows)
or “Airport/Wi-Fi” icon (for MAC OS) on the task bar/menu bar.
Double click on “netis” and click on “Connect” button, then type in
“password” as the wireless security key.
Quick Installation Guide
Ethernet Cable
2.Hardware Information
WISP signal
Modem
WPS
Default
WF2416
netis 150Mbps Wireless N Portable Router
Quick Installation Guide
Extender
Router
LAN/WAN
WF2416
Note: Different power plug is provided for different region. Here we take US
version for example.
(2)AP Mode
LED Status
Indication
Solid on
Flashing
Off
System is running.
Data is transmitting. Or WPS is pairing with
remote device.
Power is off.
Hardware
Description
Extender Router switch
LAN/WAN port
WPS button
Default button
The WF2416 is connected to a network by wired and transforms
the wired network into wireless so that multiple wireless devices
can share the network .
150Mbps Wireless N Portable Router Quick Installation Guide
Wiress
Password:
● Internet settings
netis
None
WPA -PSK/WPA2-PSK
Save
Type in the Username 1. WF2416 is connected to a DSL pure modem.
& Password provided 2. Got username & password from ISP.
3. Broadband connection is needed on PC when bypassing
by the ISP.
WF2416.
DHCP
Select “DHCP” when:
1. WF2416 is connected to a cable modem/DSL modem
router.
2. Internet works directly on PC when bypassing WF2416.
(Dynamic IP)
Static IP
Select “Static IP” when:
Type in all the IP Info. 1. Got IP Address, Subnet Mask, Default Gateway,
DNS Server from ISP.
Note: The DHCP Ser ver will be disabled after switching to “AP” mode successfully, so you
will have to set a static IP address for your PC first if you need to login to the web-based
management page again. Please refer to “ Tip 1” for how to setup a static IP for PC.
Step 4 Connect your wireless devices to WF2416 to get Internet Access.
For example, on Windows 7, click on the Wireless Network Connection icon
and select the name you set for WF2416 and type in the password you created.
WISP Mode :
Select target network and Connection Type.
WISP
AP Scan
SSID: netis
Security WPA-PSK
Encr yption Type:
TKIP
AES
Key Mode:
HEX
ASCⅡ
Key:
(please enter any 8-6 3 charcters ( ASCⅡ charcters A-Z,a-z,0-9))
DHCP ( dynamic )
Static IP
For Windows 8/ 7/Vista
1)Go to "Settings” (for Windows 8)/“Start” (for Windows 7/Vista) >
"Control Panel".
2)Left-click on“Network and Internet” >“Network and Sharing Center ”
>“Change adapter settings” (for Windows 8/ 7)/”Manage network
connections” (for Windows Vista).
3)Right-click on“Local Area Connection” and left-click on“Properties”.
4)Double-click on“Internet Protocol Version 4 (TCP/IPv4)”.
5)Select "Use the following IP address" then left-click on“OK”.
150Mbps Wireless N Portable Router Quick Installation Guide
Troubleshooting
Q: How do I restore my netis WF2416 to default settings?
A With the router powered on, holding “Default” button for 8s~10s
with a pin to restore it to factory defaults.
Q: What can I do if fails to extend the wireless range by “WPS”button?
A:
1) Refer to “Tip1” to set a Static IP address for your PC and connect the
WF2416 to your PC.
2) Open a web browser and login to http://192.168.100.1
3) Click “AP Scan” button to select the existing router and click
“Connect” button. Type in the wireless security info of the existing
router.
4) Under “Wireless Setup”, you may setup a wireless network name in
“SSID” box, it is recommended to use WPA-PSK/WPA2-PSK for
“Security” and set a wireless network key in the “Password” box,
then click “Save” button.
WIFI Extender Settings
Internet
AP Scan
Repreater SSID:
Security WPA2-PSK
Encr yption Type:
TKIP
AES
Key Mode:
HEX
ASCⅡ
Key:
seconds(60-86400)
PPPoE
For MAC OS
1)Click on the "Apple" menu > "System Preferences".
2)Click on the “Network” icon.
3)Click on “Ethernet” in the left side box and click on “Advanced” in the
lower right corner.
4)In the top options, select “ TCP/IP”.
5)In the pull-down menu next to “Configure IPv4″ select “Manually”.
6)Fill in the “IPv4 Address/Subnet Mask/Router ” parameters, and click
“OK” then “Apply”.
Appendix : FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to tr y to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Caution!
Key Renewal: 86400
seconds(60-86400)
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Wiress Setup
Wiress
SSID:
Security:
netis
None
Password:
WPA -PSK/WPA2-PSK
Password
(please enter any 8-6 3 charcters ( ASCⅡ charcters A-Z,a-z,0-9))
Save
Technical Support:
USA/ Canada
Toll Free: +1 866 71 network (+1 866 716 3896)
E-mail: usa_support@netis-systems.com
Other Regions:
E-mail: support@netis-systems.com
PKUM05176
Key Renewal: 86400
Tip 1 : Setup a Static IP for PC
Manually set the IP address of the wired network adapter on your
computer as below.
IP Address/ IPv4 Address: 192.168.100.x (1 "Control Panel".
2)Left-click on“Network and Internet Connections” >“Network
Connections”.
3)Right-click on“Local Area Connection” and left-click on“Properties”.
4)Double-click on“Internet Protocol (TCP/IP)”.
5)Select "Use the following IP address" then left-click on“OK”.
Internet Connection
Operation Mode:
Note: If you need to do advanced settings, please refer to “Tip 1” to set a static IP for your PC first and
refer to “Router Configurations”>“Step1 & Step2” to login to the web-based management page.
(please enter any 8-6 3 charcters ( ASCⅡ charcters A-Z,a-z,0-9))
1. Click “AP Scan” button to select your target network and click “Connect”
button.
2. Type in the wireless security info of the target network.
3. Select connection type. (Please refer to “Internet Settings” à ”AP Router
Mode”)
Internet
Step 1 Plug in the WF2416.
Step 2 Press the “WPS” button on your existing router. Please refer to the
instructions of the existing router for detailed way to use the WPS button.
Step 3 Press the “WPS” button on WF2416 for 1s and wait for 1 minute
and check if the signal strength of your wireless network got boosted or not.
Password
(please enter any 8-6 3 charcters ( ASCⅡ charcters A-Z,a-z,0-9))
AP Router Mode :
Select the correct Connection Type.
Select “PPPoE” when：
PPPoE
Note:Please make sure that the WPS feature is Enabled on your main router. If the main router
is unsecured, router's WPS feature will generate a random SSID & Password automatically.
For this case, please contact the technician of your main router for help.
http://192.168.100.1
150Mbps Wireless N Portable Router Quick Installation Guide
5.Extender Configurations
SSID:
Security:
Mac OS
Linux
Wiress Setup
Note: The configuration includes “Internet settings” and “Wireless settings” ,
if you choose “AP”, please go to Wireless Settings directly.
Open Internet Connect...
Step 2 Login to the router.
Open a web browser and type in http://192.168.100.1 .
WF2416
AP
AP Router
WISP
Use Interference Robustness
Connect to Hidden Wireless Network ...
Create New Wireless Network ...
This button is for resetting the router to factory
defaults.
Setup a wireless network name in “SSID” box, it is recommended to use
WPA-PSK/WPA2-PSK for “Security” and set a wireless network key in the
“Password” box, then click “Save” button.
Create Network ...
VPN Connections
it is WAN port in AP Router mode.
WPS is for quick wireless security setup and also for
extending existing wireless range with one click.
● Wireless settings
netis
Other...
Root Router
WF2416
150Mbps Wireless N Portable Router Quick Installation Guide
Operation Mode:
(Charged)
AirPort: On
Turn AirPort Off
Wired Network
Auto etho
Disconnect
Wireless Networks
disconnected
Available
netis
More networks...
This switch is for changing the operation mode of
WF2416.
It is LAN port in AP, WISP, Wi-Fi Extender mode, while
Internet Connection
The WF2416 copies and boosts the root wireless signal to extend the
coverage of the signal.
Router
Model No. WF2416
Step 3 Configure the router.
Select the Operation Mode you need from the pull-down menu.
Windows OS
(4)Wi-Fi Extender Mode

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2013:08:01 16:44:45+08:00
Modify Date                     : 2013:08:01 16:44:45+08:00
Producer                        : Corel PDF Engine Version 15.2.0.686
Author                          : Administrator
Creator                         : CorelDRAW X5
Title                           : PKUM05176 WF2416-QIG .cdr

EXIF Metadata provided by EXIF.tools