NETIS SYSTEMS WF2471B Wireless Dual Band Router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1858056
Application ID	EuZrPsEohgexa2sBuP9+OA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	78kB (975058 bits)
Date Submitted	2012-12-13 00:00:00
Date Available	2012-12-14 00:00:00
Creation Date	2012-12-06 17:17:51
Producing Software	Corel PDF Engine Version 15.2.0.686
Document Lastmod	2012-12-11 14:58:16
Document Title	PKUM01428 daul-band router QIG 认证用.cdr
Document Creator	CorelDRAW X5
Document Author:	Administrator

1.Hardware Connection
Package Contents
*This QIG is shared by netis wireless dual band router
Modem
WF2471
POWER
Wireless Dual Band Router
Quick Installation Guide
Wireless dual band router
Power Adapter
POWER
N600 Wireless
Dual Band(Gigabit) Router
Quick Installation Guide
LINE IN
Ethernet Cable
QIG
CABLE
CABLE
1. Connect the WAN port on your router to the Modem's LAN port with an Ethernet cable
2. Connect your computer to any LAN port on netis router with an Ethernet cable
3. Plug in the power adapter of netis router
4. Unplug your ADSL or Cable Modem power at least 15 seconds and plug it back in
System Requirement
Windows 8● Windows 7 ● Windows Vista
● Windows XP ● Windows 2000
●
2. Connecting by netis one stop setup
Set the IP address of your wired network adapter as
Automatically as showing below
Open your browser and type 192.168.1.1
in the address field
http://192.168.1.1
Select the Internet Connection Type you
use. We take DHCP for example. Configure
your Wireless Setup such as SSID Password
then click save to make setting effective. The
connection status page will appear below
Tips 1: If you are connecting to a Broadband service
that uses a dynamic connection (DHCP), you may
be online already. Try opening a web browser and
enter a web site. If you connect to a web site, you
are fnished with your Internet setup.
Advanced
Tips 2: you would click
to go to advance setting page.
Advanced
One stop setup!
The most convenient nets`AP Router configuration!
Internet Connection Type
Status
DHCP(Cable Modem)
General
Static IP
PPPoE
Internet
Connection
IPV4 Connectivity:
IPV6 Connectivity:
Media State:
Duration:
Speed:
Internet
No Internet access
Enabled
00:39:39
100.0Mbps
tip.Most internet connectio type is DHCP as long as
you don`t have ID/Password for connection Internet.
Wiress Setup
2.4GHz
netis_2_4G
5GHz
5G
SSID:
Details...
Wiress
Enable
Activity
Disable
Password:
Sent
Password
Received
password
tip.please enter any 8-63 charcters
Byes :
10,000,680
Disable
80,000,680
Diagnose
Save
Close
connection sucessfully. you had been online!
(Turn over)
3.Troubleshooting
How do I restore my Router's con guration to its factory default settings?
With the Router powered on, press and hold the Default button on the rear panel for 8 to 10
seconds using a pin before releasing it.
What can I do if I cannot access the Internet?
1) Check to see if all the connectors are connected well, including the telephone line (for your
modem), Ethernet cables and power adapter.
2) Check to see if you can access the Router's web manage- ment page. If you can, please follow
the following steps to solve the problem. If you can't, please refer to Appendix 1.
3) Make sure that you are connected to the netis Router with the computer that was originally
connected to your modem, then log on to the web-based management page and browse to
'Network > MAC Clone', click'Clone MAC Address' and then click 'Save'. Reboot the Router
MAC Clone
Do not set the same MAC address as the wirless network card at the WISP mode .
Restore Factory MAC
WAN MAC Address : 78 : 2b : cb : ea : 9c " 2b
Clone MAC address
Save
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement This device complies with FCC radiation
exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
PKUM01227
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could
void the user authority to operate the equipment.
Operations in 5150~5250MHz band is for indoor use only..

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2012:12:06 17:17:51+08:00
Creator Tool                    : CorelDRAW X5
Modify Date                     : 2012:12:11 14:58:16+08:00
Metadata Date                   : 2012:12:11 14:58:16+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : PKUM01428 daul-band  router QIG  认证用.cdr
Producer                        : Corel PDF Engine Version 15.2.0.686
Document ID                     : uuid:c1d90f0f-3299-450a-9811-d5efb28a4c7e
Instance ID                     : uuid:09e77d06-4ba6-4c5e-92dd-a12f23c63c2d
Page Count                      : 2
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Author                          : Administrator

EXIF Metadata provided by EXIF.tools