NEXI ZEPO Bluetooth Wireless Speaker User Manual 1

NEXI LIMITED Bluetooth Wireless Speaker 1

User manual

ºtemperature places (over 40 C), especially not in a car with thewindows closed in summer. Keep the speaker away from strongmagnetic fields. Slide the speaker's buttons gently. Sliding it toohard can damage the speaker. Do not use the speaker in anelectronics-prohibited area, such as in an airplane. Do not use thespeaker in an extremely dry environment as this can lead to staticdischarge, which can damage the speaker. Do not subject theproduct to harsh impacts. Do not drop the appliance. This mayresult in damage to the product. Do not attempt to dismantle orrepair this unit yourself. Repairs should only be performed byqualified personnel.Do not allow your speaker to be submerged in water. Do not exposeUS B socket or the speaker to water, as water entering the set maycause major damage. Active mobile phones in the vicinity may cause interference. We will not be responsible for any memory loss caused by productdamage, repairs or other reasons. Please operate the unit correctlyas stated in this manual.Disconnect the appliance from the power source when cleaning.Use a slightly dampened lint-free cloth to clean this appliance.Do not dismantle the speaker or use alcohol, thinners or benzeneto clean the surface of the player.The supplier or retailer accepts no liability for lost, corrupted ordamaged data. It remains the responsibility of the user to ensurethat they perform consistent data backups during the use of thisproduct. This product is not intended for commercial use.It is for household use only. CHARGING INDICATOR AUX IN / DC INPOWER SWITCHBLUE LED MOOD LIGHTRUBBER FOOT1/ Slide the power switch to turn on the speaker and a blue light will be    flashing shows bluetooth pairing.2/ Turn on the bluetooth function in your music device and connect    ZEPO as the speaker unit. The blue mood light will be ON as paired.3/ Play music and control the volume by using the device.ZEPOBluetooth SpeakerUser ManualModel :  ZEPOThank you for your purchase.Please read this manual carefullyBefore using the speaker.Introduction Congratulations on the purchase of your new bluetooth speaker!Before operating the speaker, please read this manual throughlyand keep it for future reference. It will help you to use many of theexciting features, which makes your experience more enjoyable.This manual contains important safety and operating information.Please read all the information carefully before you use the deviceto avoid accidents.Important Safety PrecautionsTo use this speaker safely, please read and follow the instructionscarefully before using this speaker.  The product shall not be exposed to dripping or splashing andno objects filled with liquids, such as vases, shall be placed overthe product. Dry location use only.No naked flames sources, such as candles, should be placed overor near the product.  Line-in cables may be hazardous to young children. Store theproduct carefully when it is not in use.Listen at a moderate volume. Do not listen to music at very highvolumes as this can permanently damage your hearing.To establish a safe volume level. Set your volume control at a lowsetting. Slowly increase the sound until you can hear it comfortablyand clearly, without distortion.Listen for reasonable periods of time: Prolonged exposure to soundcan also cause hearing loss, be sure to use your equipmentreasonably and take appropriate breaks. Keep the speaker clean and never store it next to a heat source or in dirty, humid or wetplaces. Keep it out of direct sunlight. Do not put the speaker in highPackage Contents Please make sure that the items shown below are included in thepackage. Should an item be missing, please contact the localretailer from which you purchased this product.2/ USB~Line-in Cable 3/ Instruction ManualBluetooth SpeakerUser ManualModel :  TABT04Thank you for your purchase.Please read this manual carefullyBefore using the speaker.1/ Speaker UnitAttention:We have done our best to produce a complete and accurate manual.However, we cannot ensure that there are no errors or omissionsduring the printing process.We cannot take responsibility for any damages caused byunauthorised attempts to upgrade software or for any datacorruption while the product is being repaired.Please note: This device contains a built-in battery. Please observe the localregulations regarding the disposal of old equipment and battery.Basic Functions :Bluetooth speaker with AUX IN function1W output powerBlue LED mood light as Bluetooth indicatorBuilt-in 600mAH Li-ion rechargeable batteryMicro USB socket for battery chargingRed LED charging indicator******Preparation before Use :Overview of controls and connection34/ If the music player is without bluetooth function, you can use the     AUX IN socket and audio cable provided to connect the speaker.     Remark :   * If the device has already been paired to the speaker before, then just   select ZEPO and it will pair again. * Please don’t play music via AUX-IN function while charging in progress.SAFETY INSTRUCTIONSTo prevent fire or electric shock hazard, do not expose the unit to rainor moisture.Do not expose the product to water ( dripping or splashing ) and noobjects filled with liquids, such as vases, should be placed on the unit.Keep the product away from direct sunlight and heat source such as radiators or stoves.Product operation temperature 0 ~ 40 C***TROUBLE SHOOTINGMake sure Bluetooth on you device is active and that it is pairedwith your speaker.You might be experiencing wireless interference, try moving yourBluetooth device and the speaker away from other wireless sources.Make sure your Bluetooth device is within range of the speaker.Try turning off your speaker and then restart the bluetooth connection.****Problem in connecting BT device :-Your audio source might be out of the wireless range of your speaker,try to move closer.You could be experiencing interference, try moving away from other sources of wireless signal.Make sure that your speaker has enough battery power.Try adjusting the volume on you audio device.Try restarting your speaker and the audio device.*****No sound on the speaker :-HOW TO USE* Plug the USB by using the cable provided for charging six hours     before the first use.* Red charging indicator will be ON while it is charging and OFF once     battery is full.

Navigation menu