NIDEC MOBILITY G8C-505M Receiver User Manual

OMRON Automotive Electronics Co. Ltd. Receiver Users Manual

User Manual

2. User’s manual (provisional)㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷2.1 User’s manual of the Radio Frequency Keyless Entry System for VehicleLOCKWhen you press the LOCK button, all the doors will lock. You cannot lock the doors with the TRANSMITTERif the key is in the key cylinder.UNLOCKWhen you press the UNLOCK button, to begin with, the driver’s door Will unlock.Secondly, if you press it once more continuing the state that driver’s door is UNLOCK, all the doors will unlock. You cannot unlock the doors with the TRANSMITTER if key is in the key cylinder. If the doors are not opened within 30 seconds after you unlock the door with the TRANSMITTER, all the doors will be automatically relocked.BOOT RELEASE When you press the TRUNK button twice, the boots will open. The boot will not open if the key is in the key cylinder.PANIC ALARMWhen you press the PANIC button, the vehicle starts sounding the horn and flashing the head light intermittently. These functions continue for 175 seconds unless any of the buttons on the TRANSMITTER are pressed.△CAUTIONThe remote control switch (TRANSMITTER) is a precision electronic device. Therefore please pay attention to the following:Do not impose shock to the TRANSMITTER. Keep the TRANSMITTER dry. Do not disassemble the TRANSMITTER.When the TRANSMITTER is opened, avoid getting water and dust, etcinside it. In addition, do not touch the precision electronic parts. 5/30
2.2 User’s manual of the Immobilizer System for VehicleWhen the ignition is turned on, the oscillator in the Immobilizer unit drives the antenna coilto produce a 125 kHz electromagnetic field which activates the transponder.The transponder and the Immobilizer exchange data by modulating the electromagnetic field.An encrypted protocol is used to ensure that the exchange of data is secured.The identity code of the transponder, which is unique for each ignition key, is transmitted to the Immobilizerunit and forwarded to the Engine ECUusing CAN communication link.If the transponder identity is recognized the engine is allowed to start, otherwise the engine will not start.△CAUTIONWhen ignition is turned on, do not bring metal close to transponder.6/30
two

Navigation menu