NIDEC MOBILITY GHW-M002 EV Remote Stick User Manual EV Remote Operation manual ai

OMRON Automotive Electronics Co. Ltd. EV Remote Stick EV Remote Operation manual ai

Users Manual

Download: NIDEC MOBILITY GHW-M002 EV Remote Stick User Manual EV Remote Operation manual ai
Mirror Download [FCC.gov]NIDEC MOBILITY GHW-M002 EV Remote Stick User Manual EV Remote Operation manual ai
Document ID1429064
Application IDgna44GrwibzBujS+SwJx6A==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize28.5kB (356206 bits)
Date Submitted2011-03-10 00:00:00
Date Available2011-03-10 00:00:00
Creation Date2011-01-26 15:23:38
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2011-01-26 16:16:23
Document TitleEV_Remote Operation manual.ai
Document CreatorPScript5.dll Version 5.2
Document Author: XPMUser

EV_REMOTE operation manual
Setting the air conditioner
The car air conditioner can be controlled with the stick prior to getting into a car.
Pressing the mode setting button once in the charge time setting mode enables the
air conditioner setting mode.
Configuration
Select the temperature you want with the setting button and press the Power/Link
button to send the setting information to the vehicle.
If a response signal from the vehicle is properly received, the setting information will be
displayed on the LCD with a buzzer sound.
Part names
Stick
Product label
Turning the power of the stick off
LCD
Pressing the Power/Link button for more than 3 seconds while the power is on turns
the power of the stick off. Also no button operation for more than 30 seconds
automatically turn the power off.
Power / Link button
Setting button (DOWN)
Mode setting button
Manual
charge button
Caution When pulling the antenan out or putting it back, move it straight up/down with
Setting button (UP)
holding the top of the antenna. The antenna may be damaged if being pulled
with brute force or bended.
Battery cover
3 Main specifications
Stick
Antenna module
Product label
Transmission frequency
Transmission power
926.85 MHz band (FCC/IC), 869.85 MHz band (EU)
< 50 mV/m (FCC/IC), < 5mW e.r.p (EU)
Antenna
Switches
1/4 lambda rod antenna
Power on/off, Mode, Charge, Setting
Link state acknowledgment
Buzzer / LCD
Battery
Lithium battery (CR2032 x 2)
Operation temperature range
-10 C to +70 C
Dimensions
Weight
88.4 mm x 32 mm x 18 mm ( not including protrusion)
35 gg
50
CN2 connector
CN1 connector (antenna connection)
Antenna module
Battery replacement
Transmission frequency
926.85 MHz band (FCC/IC), 869.85 MHz band (EU)
Transmission power
< 50 mV/m (FCC/IC), < 5mW e.r.p (EU)
We recommend that you replace the batteries after one year's use as a guide.
Power supply
5V
Batteries: CR2032 x 2
Current consumption
Antenna
Operation temperature range
1.5 mA (for receiving)
1/4 lambda printed antenna
-30 C to +85 C
How to replace the batteries
1. Remove the battery cover
Slide the slide part of the battery cover in
the direction of and lift the cover in the
direction of to release the hooks of the
battery cover ( ).
Dimensions
52 mm x 25 mm x 52 mm
Weight
35 g
Battery cover
Slide part
After sales service
For after sales service, contact :
2. Replace the batteries
Insert the new batteries (CR2032) with the
positive ( + ) side facing up.
lithium batteries
(CR2032)
3. Place the battery cover
After inserting the hooks of the battery
cover ( ), lower the cover into position
( ) and slide the slide part in the direction
of .
How to use
OMRON Automotive Electronics Co. Ltd.
6368 nenjyozaka, okusa
Komaki, Aichi 485-0802 JAPAN
Tel: +81 568 78 6392
URL: http://www.oae.omron.co.jp
Regulatory compliance
FCC/IC WARNING
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is
subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of this device.
Turning the power of the stick on
Pressing the Power/Link button for more than 1 second turns the power of the stick
on (with a buzzer sound) and the stick starts transmitting a request signal to obtain
vehicle information. If a response signal from the vehicle is properly received, the
vehicle information will be displayed on the LCD with a buzzer sound.
Setting the charge time
The time till charging is started (charge wait time) and the charging time can be set
with the stick.
Pressing the mode setting button once while the vehicle informaiotn is displayed on
the LCD enables the charge wait time setting mode. In the charge wait time setting
mode, the charge wait time can be set with the setting button.
After setting the wait time, the setting information will be sent to the vehicle by
pressing the Power/Link button. If a response signal from the vehicle is properly
received, the setting information will be displayed on the LCD with a buzzer
sound.
By pressing the mode setting button once during the charge wait time setting mode,
the stick is set to the charge time setting mode. Set the charge time in the same way
as done for setting the charge wait time.
Pressing the manual charge button resets the timer setting.
Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC
The following standards were applied: (R&TTE Directive 1999/5/EEC)
EN 60950-1: 2006 + A11:2009
EN 300 220-2 V.2.3.1
EN 301 489-3 V.1.4.1
EN 62311:2008
Hereby, OMRON Automotive Electronics Co. Ltd., declares that Stick / Antenna module are
in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2011:01:26 15:23:38
Modify Date                     : 2011:01:26 16:16:23+09:00
Author                          : XPMUser
Page Count                      : 1
XMP Toolkit                     : 3.1-701
Producer                        : GPL Ghostscript 8.15
Creator Tool                    : PScript5.dll Version 5.2
Title                           : EV_Remote Operation manual.ai
Creator                         : XPMUser
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OUCGHW-M002

Navigation menu