NINGBO CSTAR IMP and EXP 0013 Bluetooth Speaker Power Bank User Manual SL019 Prime PL 1352 instruction 11 11

Download:
Mirror Download [FCC.gov]
Document ID	3207033
Application ID	ITjztTTxAuEuM95OFKP0wA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	214.91kB (2686394 bits)
Date Submitted	2016-11-25 00:00:00
Date Available	2016-11-26 00:00:00
Creation Date	2016-11-11 15:34:02
Producing Software	Adobe PDF library 10.01
Document Lastmod	2016-11-17 10:10:36
Document Title	SL019&Prime&PL-1352-instruction-11-11
Document Creator	Adobe Illustrator CS6 (Windows)

connect the other end of the USB cable to an IN port on the
portable Power bank. Make sure the computer is on to begin
charging the portable Power bank.
PL-1352 Lynx Power Bank
3. Charging mobile phones and other electronic devices.
FCC ID:2ABHA0013
A.V : Accessories Lithium ion battery
UL 2056 certified
Model: SL019
Item No.: PL-1352
Input: DC 5V/550mA
Maximum input: DC 5.3V/600mA
Output: DC 5V/1000mA
Battery/Cell capacity: 3.6V / 2200mAh, 7.92Wh
Product capacity: 5V / 1460mAh, 7.3Wh
Operating temperature: 0~45°C for Charging
0~50°C for Discharging
Product Name: Bluetooth SpeaKer Power Bank
EN
CAUTION: Risk of Fire and Burns, don’t open, crush,
disassemble and dispose of in fire. Accessible surfaces
held or touched for short periods only. Don’t heat above
50 °C or Incinerate. Follow Manufacturer’s Instructions.
FR
DANGER: risque d’incendie et de brûlures, ne pas ouvrir,
démonter, écraser ni jeter au feu. Ne pas toucher ou tenir
les surfaces accessibles sur une longue durée. Ne pas
chauffer au-dessus de 50 ° C. Instructions de fabricant Suivre.
a. The portable power device has a USB output port which
has the maximum output current of 1000 mA.
b. Connect to USB cable to your mobile phone/device using
the appropriate connector. Connect the other end of the USB
cable to the OUT port of the portable Power bank. Your
mobile phone/device should display the status of charging.
c. Remove the USB cable from your mobile device when it is
fully charged.
Note: In order to charge device use only accessory cable
(provided with power bank) or the cable included with your
own device by the manufacturer.
1. 5V Input Port (Micro USB)
2. 5V Output Port (USB A-type)
3. Bluetooth Button
4. LED indicator
5. 3.5mm AUX Line-in Port
How to use
WARNING – When using this product, basic precautions
should always be followed, including the following:
1. Pairing adevice in bluetooth mode:
1. Read all the instructions before using the product.
2. Power bank main unit contains an internal lithium ion
battery. Upon initial use or after a prolonged storage period,
fully charge it once. The unit’s full performance is achieved
only after 2 or 3 completed charge and discharge cycles.
BT SPEAKER
3. Power banks are not allowed in checked luggage on
commercial airline flights. Handle with care and dispose of in
accordance to local regulations. Carry-on only.
2. Charging the portable Power bank
a. Using your mobile phone’s USB adapter. Connect a USB
cable to your phone’s USB adapter. Using the micro USB
connector, connect the other end of the USB cable to the IN
port on the portable Power bank. Plug the USB adapter into
the outlet to begin charging.
b. Using your computer. Connect a USB cable to a USB
outlet on your computer. Using the micro USB connector,
MADE IN CHINA
FRONT
injury to persons.
8. Do not use the power bank in excess of its output rating.
Overload outputs above rating may result in a risk of fire or
injury to persons.
9. Do not use the power bank that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
10.Do not disassemble the power bank. Take it to a qualified
service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or injury to persons.
11.Do not expose a power pack to fire or excessive temperature.
Exposure to fire or temperature above 100°C may cause
explosion. The temperature of 100°C can be replaced by the
temperature of 212°F.
12.Have servicing performed by a qualified repair person using
only identical replacement parts.This will ensure that the
safety of the product is maintained.
13. Do not use the phone or device when charging by the 2 in 1
AC adapter Power bank. Do not charge the power bank for more
than 4-6 hours and do not leave unattended.
14.Disconnect the power bank when not in use.
Warning:
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
FCC STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
To assure continued compliance, any changes or
modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to
operate this equipment. (Example- use only shielded interface
cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure
require
SAVE THESE INSTRUCTIONS
BACK
4.To reduce the risk of injury, close supervision is necessary
when the product is used near children.
5. Do not put fingers or hands into the product.
6. Do not expose power bank to rain or snow.
7.Use of a power supply or charger not recommended or sold
by power pack manufacturer may result in a risk of fire or

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : SL019&Prime&PL-1352-instruction-11-11
Metadata Date                   : 2016:11:17 10:10:36+08:00
Modify Date                     : 2016:11:17 10:10:36+08:00
Create Date                     : 2016:11:11 15:34:02+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 228
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 21497 bytes, use -b option to extract)
Instance ID                     : uuid:77eaf66f-20f8-4192-a810-e707b7f4c766
Document ID                     : xmp.did:0E018E49D8A7E611AD75F8E4997A38F3
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:9506b47d-aa2d-4666-a09c-4ff672c5e5e0
Derived From Document ID        : xmp.did:01F36E44CC73E6119924BAEA59FA3CB6
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:9681FDC5852CE51186F18F5C94D29F7E, xmp.iid:0E018E49D8A7E611AD75F8E4997A38F3
History When                    : 2015:07:17 21:14:36+08:00, 2016:11:11 15:33:59+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : E:\Work\foster Li\HIT\SL019&HIT&PL-1352\SL019.jpg
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 249.734972
Max Page Size H                 : 214.281494
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT
Font Family                     : Arial, Arial
Font Face                       : Regular, Bold
Font Type                       : Open Type, Open Type
Font Version                    : Version 5.10, Version 5.08
Font Composite                  : False, False
Font File Name                  : arial.ttf, arialbd.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 16.0
For                             : Administrator,
Bounding Box                    : 2308 -2057 2934 -1500
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools