NINGBO CSTAR IMP and EXP 0035 Wireless speaker clock with pen User Manual 7004 Instructionsx

Download:
Mirror Download [FCC.gov]
Document ID	3632895
Application ID	/fbSOSwfHnrd+Et56KLYGA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.82kB (147786 bits)
Date Submitted	2017-11-09 00:00:00
Date Available	2017-11-09 00:00:00
Creation Date	2017-11-08 10:27:03
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2017-11-08 10:27:03
Document Title	Microsoft Word - 7004 Instructions.docx
Document Creator	PScript5.dll Version 5.2
Document Author:	swain.jiang

7004 Wireless Speaker Clock with Pen
INSTRUCTIONS
Features:
Wireless Speaker
Hands‐free Microphone function
Auxiliary Line‐in Play Function
Charging Cable
Rechargeable Lithium Battery
Analog Clock
Metal Ink Pen
Specifications:
Speaker Power:
5 Watts
Battery Capacity:
800mAh
Wireless version:
4.1
Operating Distance:
30 Feet
Charging Time:
Approximately 2 hours
Playback Time:
Up to 3 hours (medium volume)
Previous/Down
Multifunction
Microphone
Next/Up
Micro USB Port
AUX Line‐In Jack
Control Buttons
MULTIFUNCTION BUTTON
Power On: Press the MULTIFUNCTION button and hold for 2‐3 seconds until a
tone is heard and the blue light flashes waiting to pair.
Power Off: Press and hold the MULTIFUNCTION button for 3‐4 seconds until a
double tone is heard and the light flashes goes out.
Pause/Play: Press and release to pause the music and repeat to resume
playing.
Answer/End Call: Press and release to answer or end a call.
‐
PREVIOUS/DOWN: Press and hold to decrease the volume / Press and release
for previous song.
NEXT/UP: Press and hold to increase volume / Press and release for next song.
Controls Next/Previous, Volume Up/Down, Pause/Play, Answer/End Call: You may
also use the functions on your smart phone or music player to control these functions.
MICROPHONE
For use as a hands‐free speaker. It is a small hole located to the left of the
MULTIFUNCTION button.
Please Note: It is strongly recommended that you turn off the speaker while not in use.
Charging
Plug the charging cable into the Charging port of the speaker and then connect the USB
end of the charging cable to the USB port of your PC or other USB power source. The red
LED light will light up during charging. The light will go off when charging is complete. It
is strongly recommended that the speaker be fully charged before first use and after
long periods of inactivity. Do not overcharge the battery.
Wireless Pairing
Please check to make sure the device to which you are pairing has wireless capabilities.
This can show up under the Bluetooth® setting on your smart phone or music player.
This information should be included in your phone or device’s instructions or packaging.
1.
Make sure that the speaker is turned off.
2.
Place the speaker and the device in proximity so that both devices are in view.
3.
Press and hold the MULTIFUNCTION button for 2‐3 seconds until speaker
power is on. Blue LED lights will flash. When paired, a tone will sound and the
light will turn solid.
4.
If your music player asks for a pass code, enter the pass code 0000 and press
OK to pair your speaker with the device. The speaker is now ready for listening
to music or answering calls.
Note: Some mobile phones or other devices may pair automatically when re‐started.
Auxiliary Line‐In Mode (Plugging in a phone or music player)
Plug one end of the provided 3.5mm AUX cable into the smart phone of music player’s
headphone or speaker jack and plug the other end into the speaker. Operate the song
selections and volume from the smart phone or other device.
•
Next / Previous and Pause / Play song function buttons are not available in
AUX Line‐in Mode. (Use the phone’s controls.)
•
Speaker volume is available in this mode, but only controls the speaker volume,
not the volume on the phone / music player.
Phone Speaker Functions
When a call comes in, the ring and voice indication will be heard through the speaker.
1.
Answer: Press and release the MULTIFUNCTION button to answer the call. You
may also answer through your phone.
2.
Reject a Call: Press and hold the MULTIFUNCTION button for 2 seconds until
you hear “call rejected”. You may also decline a call using your phone’s
functions.
3.
End a Call: Press and release the MULTIFUNCTION button during the call. You
may also end the call using your phone’s functions.
Precautions
•
Please only use the computer USB or the DC 5V power adaptor matching the
Micro USB interface to charge. Only use quality cords and adaptors.
•
Please keep and use in normal environments. Exposure to extreme elements
such as extreme heat and cold, fire, dust, excessive direct sunlight, or other
extreme elements may damage the unit. Keep debris or other items from
entering any of the ports. Do not clean with harsh chemicals.
•
Do not attempt to open, repair, or take apart the speaker. The speaker may be
damaged during that process.
•
If the speaker quality seems lessened, or a slight popping noise is heard, it
may be due to low battery. (Recharge)
•
This item is not meant for children.
•
Do not overcharge the battery.
TROUBLESHOOTING
No Sound
•
Make sure that the music player is working and that the speaker is charged.
•
Make sure the wireless is paired to this specific speaker and that the music
player and speaker are within operating distance. (30 feet)
Not charging
•
Check to make sure that you are using the correct cable and that it is fully
plugged into both the device and the USB port that you are charging from.
Also check to make sure the PC or other USB charger is turned on.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for
a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequence energy
and,if not installed and used in accordance with the instructions,may cause
harmful interference to radio communications.However,there is no guarantee
that interference will not accor in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to
which the receiver is connectec.
• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
devicecan be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2017:11:08 10:27:03+08:00
Create Date                     : 2017:11:08 10:27:03+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 7004 Instructions.docx
Creator                         : swain.jiang
Document ID                     : uuid:46410aa6-55ee-4bd6-9fff-f8ef4be7d07d
Instance ID                     : uuid:b6fa0565-47b5-4af1-9b14-b55e35c262a5
Page Count                      : 4
Author                          : swain.jiang

EXIF Metadata provided by EXIF.tools