NINGBO CSTAR IMP and EXP 0044 Wireless charger speaker User Manual SL249 7198 64 instruction 7 3

NINGBO CSTAR IMP&EXP; CO., LTD Wireless charger speaker SL249 7198 64 instruction 7 3

User Manual

Metal Bluetooth Speaker and Wireless Charging PadInstruction Manual1 x Metal Speaker 1 x USB to Micro-USB Charging Cable1 x Instruction ManualPlaying time: up to 2hrs at max volumeCharging time: up to 1.5hrsPairing Name: “Metal Wireless”(Be sure to fully charge the speaker before Charging the SpeakerConnect the provided charging cable to a power source and to the micro USB port on the speaker (6).The LED indicator light will glow red when charging and turn off when fully charged.Wireless Charging:Connect speaker to a 2A output with the provided cable, Wireless Charging LED(4) will glow red once connected.Place wireless charging supported mobile device on top charging pad, LED will glow green when device is charging.Phone will begin to charge automatically.Bluetooth® Setup:Press and hold Power Button(1) to turn ON the speaker, Bluetooth LED Indicator(2) will Turn on the Bluetooth function on mobile device, Select “Metal Wireless” pairing name. LED will turn solid BLUE if successfully paired.Speaker will automatically pair if the mobile device has been paired before.Press and hold Power Button(1) to turn off the device.Playing Music:Short press “Play/Pause” key to pause music. A second short press will resume playing music again.“Vol+/Next track”:Short press - next track.Long press - increase volume.“Vol-/Previous track”:Short press - previous trackLong press - reduce volume 1. • 2. • • •3. • • • •4. • • • 1.2.3.4.5.6.7.8.•••Play/Pause/ON/OFFBluetooth LED IndicatorVol +/Next TrackWireless Charging LED IndicatorVol-/Previous TrackMicro-USB charging portCharging LED IndicatorWireless Charging PadWhat’s included:Functions:Instructions:WARNING-When using this product, basic precautions should always be followed:Read all the instructions before use.Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C). Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time.The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture.Do not use the device in excess of its output rating. Overload outputs above Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. For professional. Incorrect reassembly may or temperatures above 104°F may cause explosion.use only identical replacement parts to ensure product safety•1.2.3.4.5.6.7.8.9.10.11.12.SAFETY PRECAUTIONS:MADE IN CHINASL240
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. • Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

Navigation menu