NINGBO DOOYA MECHANIC and ELECTRONIC TECHNOLOGY DM28CEQ-S DC Tubular motor User Manual
NINGBO DOOYA MECHANIC & ELECTRONIC TECHNOLOGY CO., LTD. DC Tubular motor
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2815117 |
| Application ID | EzuomDGZb5ZDbBhURhWGBA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 44.43kB (555436 bits) |
| Date Submitted | 2015-11-18 00:00:00 |
| Date Available | 2015-11-19 00:00:00 |
| Creation Date | 2015-11-13 11:05:26 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-11-13 11:47:51 |
| Document Title | User Manual |
| Document Creator | Adobe Illustrator CS5 |
| Document Author: | Lai hong tao |
The third limit position setting Stop×1 Stop×1 Stop× ×1 Stop×1 P2×1 Beep once Run for hint The up limit position Beep once Run for hint Beep 3 times Run for hint The third limit position （any position） ） The e down limit position OK DM28CEQ Setting is ok Already set up, down limit position Tubular Motor Specification stops The motor sto op ps The third limit position cancelled P2×1 Stop×1 Stop× p×1 Stop×1 Stop× p 1 Beep once Run un for hint Beep o once Run for for hint Version NO. : A/00 Beep 3 times Run for hint OK Setting is ok Power on P2×1 Up×1 Beep once Run for hint Rolling Rolling Beep 2 times Run for hint OK DM28CEQ Tubular Motor Delete Dele ete one em emitter mittter P2×1 P2× ×1 P2×1 Beep once Run for hint Beep 5 times Run for hint OK Delete Dele ete em emitter mitte er P2×1 Stop button ×1 L2 partition 200m 35m Emission frequency 433.92/868 MHz Matchable emitter Delete limit Beep 5 times Run for hint Beep once Run for hint P2×1 ×1 Down×1 Dow wn×1 Beep p once Run for hint DC305A DC306A Single-channel emitter Five-channel emitter Nine-channel Miniaturised portable emitter emitter DC307A DC61 DC288 DC289 DC115A DC1600 DC1602 Miniaturised portable Single-channel Fifteen-channel emitter emitter emitter P2×1 P2× ×1 OK DC287 Beep once Run for hint Button specification Technical support P2×1 Beep 4 times Run for hint DC262 DC316 DC476 Single-channel Five-channel Fifteen-channel Fifteen-channel Portable double-channel Portable nine-channel emitter emitter emitter emitter wall-mounted emitter emitter The emitters all deleted Additional function L1 open Technical support To clean up the emitter means deleting all the memory me emory of emitter and limit switch sw witch in the motor receivers Beep once Run for hint 12V The b emitter is deleted Power on L2 ᴺ Please set the limit position before use. ᴻ When in the group control mode,the setting up,deleting programme,setting limit are unworkable. P2×1 L1 One motor maximum can store 20 channels, over 20 channels, if still need add new emitters, it will be repeating covered last channel. With the same method,you only can delete the emitter b not the emitter a Beep once Run for hint Additional function Technical support It's strictly prohibited to beat the motor in transport ,storage, installation and use process. Please minimize the motor vibration. Down×1 Dot move setting setti ng is ok Additional function Effective transmitting distancemay have deviation due to actual environment Control range Repeat setting,function is cancelled; In the dot-move mode,it will move when you loose the button Beep once Run for hint Technical support Technical support Dot-move setting Additional function OK The limit is deleted 1.Press setting button (in limithead )for 2s,same as Bond rally switch,which cotrols the motor Up, Stop,Down; 2.Press setting button (in limit head) for 2s-4s,the motor will run for hint;loose it,the motor beeps once,the emitter could be added(run for hint for once); 3.Press on setting button( in limit head) for 6s~11s,the motor will run for hint,loose it,,the motor beeps twice,then motor direction has been changed(run for hint for 2 times). 4.Press on setting button (in limit head )over 11s, the motor will run for hint;loose it,,the motor beeps three times,then motor restore the factory default settings without any previous record (run for hint for 3 times). Up Stop Down E:Electronic / Electronic limit + Built-in receiver Power DC1653 15-channel LCD emitter signal wire Setting button Setting button （P2） A Forbidden drill through crown and inner gear wheel Crown installation Additional function If the motor a already experienced experie match code, the memory will w be cleared if do it again the codes,connect to the If you have matched co power, the motor mo otor will work normally, if not,the motor will beep p 1 time and turn tur to remind you entry During the settings, the time e between two operation must be short shorter ter than 6s, otherwise it will quit the set setting tting Setting up Additional al function Up×1 Beep 6 times Run for f hint P2×1 Crown Beep once Run for hint P2×1 Beep once Run for hint Beep once Down×1 Beep 6 times Run for f hint Press setting button of the motor about 2s.loose it OK Set up is ok. The up limit button control the motor clockwise. OK Set up is ok. The down limit button control the motor clockwise. Drive adapter installation Additional function Emitter a is the one already matched code, while emitter matche b has not Add Emitter Emittter Additional al function P2×1 P2×1 Beep once Run for hint P2×1 Beep once Run for hint Beep 7 times Run for hint OK Emitter adding is ok Bracket installation Additional function Set up / down limit position ᴺIn the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor will be under the step-moving status,press the setting button again to quit the step-moving status ᴻThe step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted more correctly Additional function P2×1 P2×1 ×1 Up×1 Bee Beep ep once Run n for hint ķ It is invalid when the up limit and down limit are at the same location ĸ After limit settingˈwith power and memory function; Ĺinto the match-code status 2 minutes later, it will quit out the setting limits status automatically Beep once Run for h hint Up×1 The up limit point Beep 4 times Run for hint Confirm the Blind to stop in the up limit position Rechargeable Description The motor stops Use with DC731E; Stop×5 Additional function Down×1 Stop×1 Stop×5 Run for hint Run for hint The down limit point Beep once everytime Blue=Neutral Brown=Live Stop×1 Additional function Confirm the Blind to stop in the down limit position The motor stops OK Setting is ok Beep once everytime The third limit position setting ķ After the up limit and down limit setting, you can set the third limit point between them as the half open position;ĸ The third limit point will be cancelled as the cancellation of limit and code matching;ĹLong press the stop button for 3s,the roller blinds will move to the third limit, if the motor is in the dot-move status, long press the stop button for 3s,the motor will move to the down limit firstly, then move to the third limit. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Lai hong tao Create Date : 2015:11:13 11:05:26+08:00 Modify Date : 2015:11:13 11:47:51+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Original Document ID : xmp.did:558769CCB4B1E011ACB4A5E39143CB33 Instance ID : uuid:c15702bd-9dfb-4e9c-acd8-c608e8049933 Document ID : xmp.did:97992E911555E111B1ECF1B5E7A18CA7 Rendition Class : proof:pdf History Action : saved, converted, saved, converted, converted, converted, saved, converted, converted, converted, converted, saved, converted, converted, converted, converted, converted, converted, converted, converted, saved, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, saved, saved, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, converted, saved History Instance ID : xmp.iid:558769CCB4B1E011ACB4A5E39143CB33, xmp.iid:E1123D3970B2E0118B1ADBFE2351E6ED, xmp.iid:8AF1C562F5B7E011B37F8CE7711E3D17, xmp.iid:53E5ED0713FAE0119FE9C3CE04BF2F56, xmp.iid:3BFD3D5011BCE111B59CC34AA7740B65, xmp.iid:A786D36C59C3E21198C690295585F538, xmp.iid:A0E96C41E3CFE211AE1C8F91C286691E, xmp.iid:97992E911555E111B1ECF1B5E7A18CA7 History When : 2011:07:19 11:11:30+08:00, 2011:07:20 09:33:08+08:00, 2011:07:27 16:14:36+08:00, 2011:10:19 15:18:17+08:00, 2012:06:22 13:43:13+08:00, 2013:05:23 11:32:41+08:00, 2013:06:08 14:25:14+08:00, 2012:02:12 09:18:10+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, / History Parameters : from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator Derived From Instance ID : xmp.iid:A0E96C41E3CFE211AE1C8F91C286691E Derived From Document ID : xmp.did:A0E96C41E3CFE211AE1C8F91C286691E Derived From Original Document ID: xmp.did:558769CCB4B1E011ACB4A5E39143CB33 Derived From Rendition Class : proof:pdf Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : dc113.tif, dc61.tif, 080121-1441.tif, DC1600_单通道02.jpg, DC1600_单通道02.jpg, 080121-1441.tif, 080118.tif, DC1600_单通道02.jpg, DC1600_单通道02.jpg, DC1600_单通道02.jpg, DC1600_单通道02.jpg, 080121-1441.tif, 080121-1441.tif Format : application/pdf Title : eDM25LE说明书-A-05 Creator : Lai hong tao Metadata Date : 2015:11:13 11:47:51+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 220 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16410 bytes, use -b option to extract) Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 29.700013 Max Page Size H : 21.000010 Max Page Size Unit : Centimeters Font Name : Skia-Regular, STHeiti, HiraginoSansGB-W6, AdobeSongStd-Light, STXihei, Skia Font Family : Skia, 华文黑体, Hiragino Sans GB, Adobe 宋体 Std, 华文细黑, Skia Font Face : Regular, Regular, W6, L, Regular, Regular Font Type : TrueType, TrueType, Open Type, Open Type, Open Type, TrueType Font Version : 3.1.2b8, 5.0d2e1, Version 3.02, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.02, Version 1.0 Font Composite : False, False, False, False, False, False Font File Name : skia_regular1.ttf, STHeiti.ttf, Hiragin2.otf, AdobeSongStd-Light.otf, STXIHEI.TTF, Skia_0.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: 25% Yellow Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 0.000000 Swatch Groups Colorants Yellow : 25.000000 Swatch Groups Colorants Black : 0.000000 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 3EXIF Metadata provided by EXIF.tools