NINGBO DOOYA MECHANIC and ELECTRONIC TECHNOLOGY DV240650 DC Venetian Blinds Drive User Manual DC856DC857 A 00
NINGBO DOOYA MECHANIC & ELECTRONIC TECHNOLOGY CO., LTD. DC Venetian Blinds Drive DC856DC857 A 00
User manual
DC1651
Double-channel
emitter
① In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
will be under the step-moving status,press the setting button again to quit the step-moving status
② The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
more correctly
Motor output power ：6W
OK
OK
P2×1
OK
P2×1
OK
Down×1
×
1
P2
Down
×
1
P2×1 P2×1Up×1
DV24CE
Blind Motor Specification
L1
L2
Up×1 Stop×1
Stop×1
Stop×1
Stop×3s Stop×5
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
Stop
×
1
A
Additional
function
Delete emitter
A
Additional
function
Set up / down
limit position
①
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
will be under the step-moving status,
②
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
more correctly
P2
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
will be under the step-moving status,
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
more correctly
P2
×
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
will be under the step-moving status,
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
more correctly
×
1
A
Additional
function
Delete emitter
A
Additional
function
Set up / down
Set up / down
limit position
limit position
P2×1
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
press the setting button again to quit the step-moving status
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
press the setting button again to quit the step-moving status
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
Up
×
1
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
press the setting button again to quit the step-moving status
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
press the setting button again to quit the step-moving status
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
P2
Up
×
1
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
P2
P2
×
1
P2×1
The emitters
all deleted
OK
Switch on
Stop button ×1
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
will be under the step-moving status,
Delete emitter
Set up / down
limit position
×
1
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
press the setting button again to quit the step-moving status
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
will be under the step-moving status,
press the setting button again to quit the step-moving status
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
press the setting button again to quit the step-moving status
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
press the setting button again to quit the step-moving status
In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
press the setting button again to quit the step-moving status
P2
×
1
Stop button
×
1
Run for hint
Run for hint
Run for hint Run for hint
Run for hint
Run for hint
Run for hint Run for hint
Run for hint
Run for hint
DV24CE input voltage 12V
Stop
×
1
Run for hint
Run for hint
OK
① It is invalid when the up limit and down limit are at the same location
② Must complete the down limit point to limit set;
③ After limit setting，with power and memory function;
DC1653
15-channel
LCD emitter
Version NO. : A/02
Technical support
T
Technical
support
Control range
T
Technical
support
Effective transmitting
distancemay have de-
viation due to actual
environment
① Please set the limit position before use.
② When in the group control mode,the
setting up,deleting programme,setting limit
are unworkable.
③ The motor change the direction need to
set limit point again; L1 open L2 partition Emission frequency
12V 200m 35m 433.92/868 MHz
Matchable emitter
T
Technical
support
Button specification
T
Technical
support
For the emitters without setting button like DC1650,
you can press up button and stop button at the same
time to work as the same function as setting button.
DC1602
15-channel
emitter
DC306A
5-channel
emitter
DC305A
Single-channel
emitter
DC1650
Single-channel
emitter
DC313A
15-channel
emitter
DC287
Single-channel
emitter
DC288
5-channel
emitter
DC289
15-channel
emitter
DC316A
Portable double-
channel emitter
DC476A
Portable 9-channel
emitter
DC262
15-channel
emitter
DC1600
Single-channel
emitter
DC287
The prog-
ram button
DC316A
Portable double-
channel emitter
The prog-
ram button
DC1653
DC1653
15-channel
LCD emitter
DC316A
DC476A
DC1653
15-channel
LCD emitter
DC316A
Portable double-
channel emitter
DC476A
Portable 9-channel
emitter
Up
Stop
Down
Setting
button
（P2）
To clean up the emitter means deleting
all the memory of emitter and limit
switch in the motor receivers
Power on
Stop×5 Stop×5
Confirm the Blind
to stop in the
down limit position
The up
limit point
The down
limit point
The motor stops
The motor stops
The motor stops
Setting is ok
① After the up limit and down limit setting, you can set
the third limit point between them as the half open position
② The third limit point will be cancelled as the cancellation
of limit and code matching
The third limit position setting
The third limit position cancelled
A
Additional
function
The third limit position setting
Already set up, down
limit position
The up
limit
position
The down
limit
position
The third
limit position
（any position）
The third
limit position
Stop×5
The third limit
point setting
successfully
The third limit
point cancelled
successfully
When motor
reaches third
limit position
Every time interval
not less than 1 second
A
Additional
function
Delete limit
Power on
The limit
is deleted
Blind
Blind
E:Electronic
Electronic limit + Built-in receiver
Power
connector
Confirm the Blind
to stop in the up
limit position
Down×1
One motor maximum can store 20
channels, over 20 channels, if still
need add new emitters, it will
be repeating covered last channel.
A
Additional
function
Rechargeable Description
A
Additional
function
Installation of the motor
Repeat the reverse of direction setting operation,
the direction of motor can be reverted in a loop
OK
DC683B
①DV24DE can be charged by the charger DC212 or the
motor can get the power from the 12V battery pole;
We have two types of battery pole,they are DC224 and
DC224A (rechargeable)
②DC224A is rechargeable by solar panel DC683B or
charger Dc520.
DC224A
DC520
DC224A
P2×1
P2×1 P2×1
P2
P2
×
1
1
P2
P2
×
1
1
P2×1
OK
If the motor already experienced match code,
the memory will be cleared if do it again
If the motor already experienced match code,
P2×2
Up×1
Down×1
Up×1 Down×1
If the motor already experienced match code,
the memory will be cleared if do it again
If the motor already experienced match code,
the memory will be cleared if do it again
Up
×
1
Repeat the reverse of direction setting operation,
the direction of motor can be reverted in a loop
Repeat the reverse of direction setting operation,
the direction of motor can be reverted in a loop
Down
×
1
Set up is ok. The
up limit button
control the motor
clockwise.
OK
Set up is ok. The
down limit button
control the motor
clockwise.
OK
Power off Power on
Power on
OFF
OFF
5s
T＜7s
After switch on, press setting button of
the motor, the motor will run for hint
A
Additional
function
Setting up
During the settings, the time between
two operation must be shorter than 4s,
otherwise it will quit the setting
Run for hint
Run for hint
Run for hint
Run for hint
Run for
hint
Run for hint
Successful change
the direction
Power on
Setting button ×5s
A
Additional
function
The reverse of direction setting
A
Additional
function
Dot-move setting
Switch on
Emitter
adding
is ok
A
Additional
function
Add Emitter Emitter a is the one already
matched code, while emitter
b has not
Dot move
setting is ok
Repeat setting,
function is cancelled
12V Battery Pole（DC224(A)）
DC212
U-SHAPE PLATE
U-SHAPE GROOVE
VENETIAN
BOTTOM BEAM
VENETIAN
BLINDS
DC VENETIAN
BLINDS DRIVE
DV24CE
WALL BRACKET
ROPE WINDER
DS391
DRIVE-SHAFT
Power on
A
Additional
function
The reverse of direction setting
The reverse of direction setting
A
Additional
Dot-move setting
OK
Repeat the reverse of direction setting operation,
the direction of motor can be reverted in a loop
Repeat the reverse of direction setting operation,
the direction of motor can be reverted in a loop
Successful change
the direction
Repeat setting,
function is cancelled
OK
Setting button
The reverse of direction setting
The reverse of direction setting
Dot-move setting
Dot-move setting
The motor runs
upword
The motor runs
downword
The motor will stop
Stop button×1Up button×1 Up button×1
