NINGBO DOOYA MECHANIC and ELECTRONIC TECHNOLOGY DV240650 DC Venetian Blinds Drive User Manual DC856DC857 A 00

Download:
Mirror Download [FCC.gov]
Document ID	3169060
Application ID	ZXQ1c+PAdELI/teFe6rymw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	328.06kB (4100800 bits)
Date Submitted	2016-10-20 00:00:00
Date Available	2016-10-20 00:00:00
Creation Date	2013-04-01 09:37:36
Producing Software	Adobe PDF library 9.90
Document Lastmod	2016-08-01 11:49:11
Document Title	杜亚DC856DC857说明书-A-00
Document Creator	Adobe Illustrator CS5

To clean up the emitter means deleting
all the memory of emitter and limit
switch in the motor receivers
Delete emitter
Stop button ×1
P2×1
×1
Additional
function
P2×1
Run for hint
Run for hint
Set up / down
limit position
Additional
function
Blind Motor Specification
The emitters
all deleted
Switch on
DV24CE
OK
① It is invalid when the up limit and down limit are at the same location
② Must complete the down limit point to limit set;
③ After limit setting，with power and memory function;
Version NO. : A/02
① In the process of adjusting the up / down limit: when the motor moving up or down, press the setting button once, the motor
will be under the step-moving status,press
status,press the setting button again to quit the step-moving status
② The step-moving status: themotor will run up or down by the way of step-moving so that the limit position can be adjusted
more correctly
P2×1
P2
P2×
×1
Up×1
P2×1
P2
Run for hint
Up×1
Power on
Down×1
Run for hint
Confirm the Blind
to stop in the
down limit position
Setting is ok
Stop×5
Stop×1
Run for hint
The third
limit position
（any position）
Already set up, down
limit position
OK
① After the up limit and down limit setting, you can set
the third limit point between them as the half open position
② The third limit point will be cancelled as the cancellation
of limit and code matching
The third limit position setting
The down
limit
position
Technical
support
OK
L1
12V
DC305A
Single-channel
emitter
DC306A
5-channel
emitter
L2
L1 open
L2 partition
200m
35m
Emission frequency
433.92/868 MHz
For the emitters without setting button like DC1650,
you can press up button and stop button at the same
time to work as the same function as setting button.
Matchable emitter
Technical
support
The third limit
point setting
successfully
The motor stops
Blind
Blind
① Please set the limit position before use.
② When in the group control mode,the
setting up,deleting programme,setting limit
are unworkable.
③ The motor change the direction need to
set limit point again;
The motor stops
The third limit position setting
The up
limit
position
Effective transmitting
distancemay have deviation due to actual
environment
Control range
DV24CE input voltage 12V
Motor output power ：6W
One motor maximum can store 20
channels, over 20 channels, if still
need add new emitters, it will
be repeating covered last channel.
The motor stops
The down
limit point
Additional
function
Technical
support
Stop×5
Stop×1
Run for hint
Technical support
Run for hint
Confirm the Blind
to stop in the up
limit position
Stop×5
Stop×1
The up
limit point
DC313A
15-channel
emitter
DC1650
Single-channel
emitter
DC1651
Double-channel
emitter
DC1600
Single-channel
emitter
DC1602
15-channel
emitter
DC476A
Portable 9-channel
emitter
DC1653
15-channel
LCD emitter
The third limit position cancelled
Stop×3s
Stop×5
Run for hint
The third
limit position
When motor
reaches third
limit position
Delete limit
Additional
function
P2×1
×1
Every time interval
not less than 1 second
Down×1
Run for hint
OK
The third limit
point cancelled
successfully
DC288
5-channel
emitter
Run for hint
E:Electronic
OK
DC289
15-channel
emitter
DC262
15-channel
emitter
DC316A
Portable doublechannel emitter
Button specification
Technical
support
P2×1
P2
The limit
is deleted
Power on
DC287
Single-channel
emitter
Electronic limit + Built-in receiver
Power
connector
The program button
Up
Stop
Down
Setting
button
（P2）
A
Installation of the motor
Additional
function
Additional
function
If the motor already experienced match code,
the memory will be cleared if do it again
Setting up
During the settings, the time between
two operation must be shorter than 4s,
otherwise it will quit the setting
Up×1
Run for hint
5s
ROPE WINDER
DS391
Set up is ok. The
up limit button
control the motor
clockwise.
T＜7s
DRIVE-SHAFT
OK
P2×2
OFF
Power off
Power on
Down×1
WALL BRACKET
Run for hint
OK
U-SHAPE GROOVE
DC VENETIAN
BLINDS DRIVE
Set up is ok. The
down limit button
control the motor
clockwise.
After switch on, press setting button of
the motor, the motor will run for hint
DV24CE
U-SHAPE PLATE
VENETIAN
BLINDS
The reverse of direction setting
Additional
function
Up button×1
Stop button×1
Run for hint
Power on
Rechargeable Description
Additional
function
ttery
12V Ba
Up button×1
Setting button ×5s
VENETIAN
BOTTOM BEAM
Repeat the reverse of direction setting operation,
the direction of motor can be reverted in a loop
)）
Po
224(A
le（DC
①DV24DE can be charged by the charger DC212 or the
motor can get the power from the 12V battery pole;
We have two types of battery pole,they are DC224 and
DC224A (rechargeable)
②DC224A is rechargeable by solar panel DC683B or
charger Dc520.
The motor runs
upword
OK
Successful change
the direction
The motor will stop
Repeat setting,
function is cancelled
Dot-move setting
Additional
function
The motor runs
downword
Up×1
P2×1
Down×1
Run for hint
Run for hint
OK
Dot move
setting is ok
Power on
DC224A
DC520
DC224A
DC212
Emitter a is the one already
matched code, while emitter
b has not
Add Emitter
Additional
function
P2×11
P2
P2×11
P2
Run for
hint
DC683B
Switch on
P2×1
OK
Emitter
adding
is ok


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 4
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : 杜亚DC856DC857说明书-A-00
Metadata Date                   : 2016:01:18 14:29:34+08:00
Modify Date                     : 2016:08:01 11:49:11+08:00
Create Date                     : 2013:04:01 09:37:36+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 256
Thumbnail Height                : 216
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 16054 bytes, use -b option to extract)
Instance ID                     : uuid:9caf466d-08a2-a24c-8ab2-259b8f582622
Document ID                     : xmp.did:EB4609BC6C9AE211A566DB8188AD9161
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:deb7252a-5e7b-0d42-8bd0-3d1255e073d0
Derived From Document ID        : xmp.did:F77F117407206811808386807CC8025C
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:15901FCE0B1FE211BD8787F9F68E2964, xmp.iid:36F990CB2D23E211923BDB611D3CBDEA, xmp.iid:BDF3E4E6D123E211BB2F9D85160FE059, xmp.iid:07801174072068118C1482B56B550BCC, xmp.iid:F97F117407206811871FD7E518F9728F, xmp.iid:F77F117407206811808386807CC8025C, xmp.iid:EB4609BC6C9AE211A566DB8188AD9161
History When                    : 2012:10:26 09:23:53+08:00, 2012:10:31 15:40:44+08:00, 2012:11:01 11:12+08:00, 2013:02:25 10:45:18+08:00, 2013:03:12 13:54:54+08:00, 2013:03:15 08:27:57+08:00, 2013:04:01 09:37:37+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /, /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Documents and Settings\Administrator\桌面\1.jpg, C:\Documents and Settings\Administrator\桌面\3.jpg, C:\Documents and Settings\Administrator\桌面\2.jpg, dv25-zz-tu.tif, dv25-zz-tu.tif, dv25-zz-tu.tif, dv25-zz-tu.tif, dv25-zz-tu.tif, DC1600_单通道02.jpg, DC1600_单通道02.jpg, 080121-1441.tif, dv25-zz-tu.tif, dv25-zz-tu.tif, dv25-zz-tu.tif, 080121-1441.tif, 080121-1441.tif, 080118.tif, DC1600_单通道02.jpg, DC1600_单通道02.jpg, 080121-1441.tif
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 296.999959
Max Page Size H                 : 210.001652
Max Page Size Unit              : Millimeters
Font Name                       : Skia-Regular, Skia, AdobeSongStd-Light, STXihei, HiraginoSansGB-W6, STHeiti
Font Family                     : Skia Regular, Skia, Adobe 宋体 Std, 华文细黑, Hiragino Sans GB, 华文黑体
Font Face                       : Regular, Regular, L, Regular, W6, Regular
Font Type                       : Unknown, TrueType, Open Type, Open Type, Open Type, TrueType
Font Version                    : Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.0, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.02, Version 3.02, 5.0d2e1
Font Composite                  : False, False, False, False, False, False
Font File Name                  : MyriadPro-Regular.otf, skia.ttf, AdobeSongStd-Light.otf, STXIHEI.TTF, Hiragino Sans GB W6.otf, STHeiti.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.90
Creator                         : Adobe Illustrator CS5

EXIF Metadata provided by EXIF.tools