NITGen MFDU01-C2 EyeD OptiMouse User Manual MFDU01 C2 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	182328
Application ID	hush94+HWtfalIJb/krp1g==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.67kB (495903 bits)
Date Submitted	2001-12-06 00:00:00
Date Available	2001-12-05 00:00:00
Creation Date	2001-12-03 13:39:12
Producing Software	Acrobat PDFWriter 4.05 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	(MFDU01-C2)UserMan
Document Creator	(MFDU01-C2)UserMan.doc - Microsoft Word

EyeD OptiMouse
(MFDU01-C2)
NITGen Co., Ltd.
www.nitgen.com
customer@nitgen.com
FCC NOTICE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED
OPERATION.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio
communication. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which
the receiver is connected.
- Consult the dealer of an experienced radio/T V technician for help.
NOTE : The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
© Copyright 1998, SecuGen Corporation & NITGen Co., Ltd.
ALL RIGHTS RESERVED
Serial Number:
Specifications subject to change without notice.
NITGen, the NITGen logo, EyeD OptiMouse, EyeD Hamster, and EyeD Keyboard are trademarks of
NITGen Co., Ltd.
All other brands or products may be trademarks, service marks or registered
trademarks of their respective owners.
SECUGEN USER LICENSE AGREEMENT
SecuGen Corporation (“SecuGen”) is granting you (an individual or an entity,
either of which is referred to herein as “Licensee”) a license to use SecuGen’s
Developer’s Kit or its Evaluation Kit, including computer software, hardware,
associated media and printed materials (individually “DK” and “EK,” and
collectively the “Products”) only upon the condition that Licensee accepts all of
the terms and conditions contained in this User License Agreement (the
“Agreement”). If Licensee does not agree to the terms of this Agreement,
Licensee should not install or use the Products, rather, promptly return the
Products to the place of purchase.
1. Grant of License. This Agreement grants Licensee a personal, limited, nontransferable, non-exclusive right to install and use one copy of the Products on a
single computer exclusively for the following purposes:
a. Licensee may use the DK solely for developing, designing, and testing
SecuGen software applications for use with SecuGen products
(“Applications”).
b. Licensee may install and use one copy of the EK for the sole purpose of
running Applications provided to Licensee by SecuGen.
c. Licensee may modify the sample source code located in the Products’
“samples” directories (“Sample Code”) to design, develop and test SecuGen
Applications. Licensee may also reproduce and distribute the Sample Code in
object code form along with any modifications Licensee makes to the Sample
Code, provided that Licensee complies with the distribution requirements
described below. For purposes of this section, “modifications” shall mean
enhancements to the functionality of the Sample Code.
d. Licensee may copy and redistribute the Sample Code provided that: (a) it is
distributed as part of an Application prepared by Licensee; (b) Licensee’s
Application adds significant and primary functionality to the Sample Code;
(c) the Sample Code only operates in conjunction with the Products; (d)
Licensee does not permit further redistribution of the Sample Code; (e)
Licensee does not use SecuGen’s name, logo or trademarks to mark
Licensee’s Application; (f) Licensee includes a valid copyright notice on
Licensee’s Application; and (g) Licensee agrees to indemnify, hold harmless,
and defend SecuGen from and against any claims or lawsuits, including
attorney’s fees, that arise or result from the use or distribution of Licensee’s
Application.
e. No other uses and/or distribution of the Products or Sample Code are
permitted without SecuGen’s prior written consent. SecuGen reserves all
rights not expressly granted to Licensee.
2. Limitations or Restrictions. Licensee may not: (i) modify or translate the
Products; (ii) reverse engineer, decompile, or disassemble the Products, except and
only to the extent this restriction is expressly permitted by applicable law; (iii)
separate the Products component parts to transfer to a third party; (iv) rent, lease,
sell or lend the Products.
3. Intellectual Property Rights. Licensee acknowledges that no title to the
intellectual property in the Products and any components thereof are transferred to
Licensee. All rights, title and copyrights in and to the Products and any copies are
owned by SecuGen. The Products are protected by copyright laws and international
copyright conventions and treaties.
4. Disclaimer of Warranty. The Products are deemed accepted by Licensee. The
PRODUCTS are provided to Licensee “AS IS” and without warranty of any kind.
To the maximum extent permitted by applicable law, SecuGen further disclaims all
warranties, including without limitation any implied warranties of merchantability,
fitness for a particular purpose, and non-infringement. Any and all risk arising out of
the use or performance of the PRODUCTS remains with Licensee. In no event shall
SecuGen or its suppliers be liable for any consequential, incidental, direct, indirect,
special, punitive, or other damages whatsoever (including, without limitation,
damages for loss of business profits, business interruption, loss of business
information, or other pecuniary loss) arising out of this Agreement or the use of or
inability to use the Products, even if SecuGen has been advised of the possibility of
such damages. Because some states/jurisdictions do not allow the exclusion or
limitation of liability for consequential or incidental damages, the above limitation
applies only to the extent permitted by applicable law.
5. Limitation of Liability. SecuGen’s total liability and Licensee’s exclusive
remedy under this Agreement shall not exceed the replacement cost of a single copy
of the Products.
6.
Indemnification. Licensee shall hold harmless, indemnify and defend SecuGen,
its officers, directors and employees, from and against any claim, suit or proceeding
and any losses, damages, fines and expenses (including attorneys’ fees and costs)
arising out of or relating to any claims that Licensee’s use of the Products in
conjunction with any Licensee Application infringes the patent, copyright,
trademark, trade secret, or other proprietary rights of any third party, or resulting
from any breach of this Agreement by Licensee.
7. Termination. Without prejudice to any other rights, SecuGen may terminate
this Agreement if Licensee fails to comply with any term or condition of this
Agreement. Upon termination of this Agreement, Licensee shall immediately
discontinue the use of the Products and certify destruction of all full or partial copies
of the Products and related materials provided by SecuGen. Licensee may also
terminate this Agreement at any time by destroying the Products and all copies
thereof.
8.
General. Licensee acknowledges that he or she has read this Agreement,
understands it, and that by using the Products Licensee agrees to be bound by the
terms and conditions set forth in this Agreement. Licensee further agrees that the
Agreement is the complete and exclusive statement of the understanding between
SecuGen and Licensee which supersedes any proposal or prior agreement, oral or
written, and any other communication between SecuGen and Licensee relating to the
subject matter of this Agreement. This Agreement may not be modified except in
writing duly signed by an authorized representative of SecuGen and Licensee. If any
provision of this Agreement is held to be unenforceable for any reason, such
provision shall be reformed only to the extent necessary to make it enforceable, and
such decision shall not affect the enforceability of such provision under other
circumstances, or of the remaining provisions hereof under all circumstances.
9.
U.S. Government Restricted Rights. Use duplication, or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or
subparagraphs (c)(1) and (2) of the Commercial Computer Software – Restricted
Rights regulation found at 48 CFR 52-227-19, as applicable. Manufacturer is
SecuGen Corp., 1740 Technology Drive Suite 530, San Jose, California 95110.
Licensee acknowledges that the laws and regulations of the United States restrict the
export and re-export of the Products. Licensee agrees that the Products in any form
will not be exported or re-exported without the appropriate United States and foreign
government approval.
WARRANTY
THIS PUBLICATION AND ALL ACCOMPANYING SOFTWARE AND
HARDWARE ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OF IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR
PURPOSE,
AND
NON-INFRINGEMENT.
UNDER
NO
CIRCUMSTANCES WILL SECUGEN CORPORATION BE LIABLE TO THE
PURCHASER OR ANY USER FOR ANY DAMAGES, INCLUDING ANY
INCIDENTAL
OR
CONSEQUENTIAL
DAMAGES,
EXPENSES,
LOST
PROFITS, LOST SAVINGS, OR OTHER DAMAGES ARISING OUT OF THE
USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF THE SELLER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR
TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY MADE TO
THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED
INTO NEW EDITIONS OF THIS PUBLICATION. SECUGEN CORPORATION
MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S)
AND/OR THE PROGRAM(S) DESCRIBED IN THIS PUBLICATION AT ANY
TIME AND WITHOUT NOTICE.
Bio metrics overview
Biometrics is an automated method of recognizing a person based on physical
or behavioral characteristics. Examples of human traits and behaviors used in
biometrics include fingerprint, voice, face, retina, iris, handwriting, and hand
geometry.
There are two key functions offered by a biometric system. One is
identification, a one-to-many matching process, in which a biometric sample is
compared against a database of stored users. The other is verification, a oneto-one matching process, in which the biometric system will verify whether or
not an individual’s biometric sample matches a previously enrolled data.
Using biometrics for identifying and authenticating human beings offers some
unique advantages over traditional and current methods. Only biometrics
authentication is based on the identification of an intrinsic part of a human
being. Tokens, such as smart cards, magnetic stripe cards, and physical keys,
can be lost, stolen, duplicated, or left at home. Passwords can be forgotten,
shared, or unintentionally observed by a third party. On the other hand,
biometrics technology provides both security and convenience.
With an increasing reliance on online technology and other shared resources,
the information age is quickly revolutionizing the way transactions are
completed. Everyday actions are increasingly being handled electronically, and
this growth in electronic transactions has resulted in greater demands for fast
and accurate user identification and authentication methods. Biometrics
technology is the way to achieve fast and convenient authentication with a
high level of accuracy.
n
Advantages of using fingerprints
The advantages of using a fingerprint are its acceptance, convenience, and
reliability. It takes little time and effort to acquire one’s fingerprint with a
fingerprint identification device. Ancient officials used thumbprints to seal
documents over two thousand years ago, and law enforcement agencies have
been using fingerprint identification since the late 1800s. Many studies have
also found that using fingerprints as an identification source is the least
intrusive of all biometrics techniques. In addition, there is a great amount of
scientific data supporting the idea that no two fingerprints are alike.
SecuGen company
SecuGen develops and markets biometrics authentication solutions that enable
individuals or groups to protect their valuable resources. The technology
focuses on hardware and software products based on advanced fingerprint
identification and verification methods.
SecuGen's Technology Overview
SecuGen’s products are the result of endless dedication to high standards in
technology, engineering and design. The fingerprint recognition module boasts
outstanding features over other existing fingerprint recognition products.
¨ EXCELLENT IMAGE QUALITY
High quality fingerprint images are generated using advanced, patentpending optical methods.
¨ DURABILITY
Mechanical strength tests show resistance to impact, shock and scratches.
¨ POWERFUL SOFTWARE
Precise, fast processing algorithm ensures efficiency and reliability.
¨ RUGGEDNESS AND VERSATILITY
Careful engineering and superior material quality allows for use under
extreme conditions.
¨ ERGONOMIC DESIGN AND INTEGRATION
M odular design for seamless integration into small devices, ease of use, and
compatibility make it ideal for a broad range of applications.
¨ LOW COST
Products are developed and engineered to deliver high performance at very
affordable prices for general as well as industrial use.
1. MFDU01- C2 EyeD OptiMouse
1.1 Features
Based on unique technologies (patent pending), the Fingerprint device is
able to capture fingerprint images with very high contrast and extremely low
distortion. It is also able to accurately capture dry fingerprints, a known
challenge for optical fingerprinting systems.
The module may be applied to a wide range of applications thanks to the
following features :
Integration-readiness
Durability : impact- and scratch-resistance
Fine image quality: extremely low distortion, superior performance
Competitively low price
Pass-through provided
¨
Compatibility : Works with any Windows 95/98 system that supports the
Parallel
1.2 Block Diagram
2. H/W Installation
2.1 Testing System Requirements
¢ USB Driver
£ IBM compatible models PC586 or later
£ CD-ROM (Or 1.44MB FDD)
£ Parallel ports (EPP or ECP mode-EPP mode recommended)
£ PS/2 port (mouse jack port)
£ 16 MB RAM
£ 20 MB hard disk empty space
£ MS Windows 98 or Windows 2000
2.2 Installing USB Driver
1)After executing Windows, insert the installation CD or execute the driver
installation program. Setup should start automatically.
2)When the driver installation is finished, connect the USB cable to the USB
port on the host computer as shown below.
3)The Add New Hardware Wizard will appear when the device is connected.
This will search for the new driver for “USB Composite Device”. Click
.
Note: It can be a little different according to the OS type.
4)Choose “Search for the driver that is the most appropriate for the device
(Recommended)”, then click .
5)Select the CD-ROM drive and then click .
6)“USB composite device” dialog box appears, click .
7)When “USB human interface device” dialog box appears, click .
The next screen to appear will be same as 4, 5, and then click 
to continue.
note: In case of USB Hamster, installation is now completed.
8)When “SecuGen USB” wizard dialog appears, click .
9)Choose “Search for the driver that is the most appropriate for the device
(Recommended)”, then click .
10) Click the CD-ROM drive check box, and then click .
11) When the “SecuGen FDU*** USB FRD” dialog appears, click .
12) Click . The installation is now finished.
2.3 Executing Diagnostic Tools
1)Click “Run” to open the Run Box in start menu.
2)Type “SGD” as shown below, then click .
2.4 Check System Status
Drivers installed
If parallel type has been checked, it indicates that a driver for parallel
type device has been installed. And, if USB type has been checked, a
driver for USB has been installed. If both have been checked, both
types of drivers have been installed.
Parallel Port Status
It appears only when parallel type driver has been installed. It indicates
the printer port connected to the current system ’s parallel port.
USB Device
It appears only when a USB type driver has been installed. It shows the
device version and type of the USB device connected to current system.
2.5 View of Fingerprint Image
1)Select a fingerprint device you want to use.
2)Click  button to initialize the device.
3)Click  button, then the captured fingerprint image appears in the
window.
4)If you click  after selecting check box “Continuous Capture”, then
fingerprint image appears continuously. At this time, information about
the action state of the device appears below.
2.6 Brightness and Contrast Controls
1)If you click  button, Device Configuration window appears as
shown below.
2)If you click , the fingerprint image is captured. If it appears too
bright as below, adjust ‘Brightness’ or ‘Contrast’. If it is still bright,
increase ‘Gain’ value one level at a time.
3)To recover the previous setup, click . If you click , the
newly setup value gets applied.
4) If you click , it will automatically find the most optimum
setup value.
2.7 Others
In Support tab, there are information of the program ’s version and the
homepage address.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 25
Creator                         : (MFDU01-C2)UserMan.doc - Microsoft Word
Create Date                     : 2001:12:03 13:39:12
Title                           : (MFDU01-C2)UserMan
Producer                        : Acrobat PDFWriter 4.05 for Windows

EXIF Metadata provided by EXIF.tools