NMB Technologies 2300 Keyboard User Manual nmb kbd manual

NMB Technologies Corp. Keyboard nmb kbd manual

Users Manual

Notice Information in this manual is subject to change without notice. NMB TECHNOLOGIES IS NOT LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED IN THIS DOCUMENT; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE OR USE OF THIS MATERIAL. NMB Technologies, Inc. Computer Keyboard User's Manual
To Install the Keyboard: • Turn off computer before installing the keyboard. • Find the keyboard receptacle on the rear panel of the computer. Usually, an icon can be seen to identify the keyboard connector as shown below. • Connect keyboard plug on keyboard cable to the proper receptacle on the computer. • Note: Never attempt to force the plug into the receptacle if it does not fit! To Angle the Keyboard: • Use the fold-out tilt legs, located at the back left and right corners on the underside of the keyboard. Pull the tabs outward to full open position. Do not use excessive force when doing so. Tilt leg Back of Keyboard Tilt leg Underside of Keyboard Front of Keyboard Keyboard Tilt leg
Information to User: The user that changes or performs modifications not expressly approved by the party responsible for compliance could void the user’s authority to operation the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna  Increase the separation between the equipment and receiver  Connect the equipment into an outlet on circuit different from that to which the receiver is connected  Consult the dealer or an experienced radio/TV technician for help 9730 Independence Ave., Chatsworth, CA 91311 (818) 341-0820

Navigation menu