NMB Technologies CP239218 2.4GHz Transceiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	587027
Application ID	gN6u7gk3WZ8QtaoqZeJs9w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.79kB (159882 bits)
Date Submitted	2005-09-29 00:00:00
Date Available	2005-09-28 00:00:00
Creation Date	2005-08-29 17:17:21
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2005-09-27 15:32:16
Document Title	untitled

CONNECTOR
To be connected with the
main board in PC via USB
interface
CONNECT button :
To be placed on center of the
PC.
Press to enable the receiver to
communicate with the
30
To maintain good communication, operate the wireless keyboard within the distance
limitation of keyboard: approximately 32 feet (approximately 10 m) from the receiver.
Confirm that the supplied AA batteries are properly installed in keyboard.
Press the CONNECT button of the receiver (located on the left of the computer) first,
and then press the CONNECT button on the bottom of the keyboard.
Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in
the area near the wireless keyboard. These devices may cause interference, causing the
keyboard to stop working properly.
Do not place metal furniture near the receiver or wireless keyboard, as this may create
interference, causing the keyboard to stop working properly.
Do not mix old (used) and new batteries when replacing batteries in the wireless keyboard.
Always use the same type and manufacture of battery.
Do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used,
new or different types of batteries can damage the keyboard.
To connect the receiver and the wireless keyboard
1. Insert the supplied two AA batteries (1) into the battery compartment on the bottom of
the wireless keyboard.
2. Turn on the computer.
3. Press the CONNECT button (3) on the center of the computer (receiver).
4. Press the CONNECT button (4) on the bottom of the keyboard.
Communication between the wireless keyboard and the computer should now be established.
Steps 3 and 4 must be completed within 10 seconds of each other.
31
Non-Modification statement: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
32

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6daf20b3-24d1-4dd8-9e59-acc70cadcf9b
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Modify Date                     : 2005:09:27 15:32:16-07:00
Create Date                     : 2005:08:29 17:17:21+09:00
Metadata Date                   : 2005:09:27 15:32:16-07:00
Document ID                     : uuid:1c2da332-8546-4138-b040-e1531721fdf2
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools