NMB Technologies RT7D20 Keyboard User Manual nmbmnl2

NMB Technologies Corp. Keyboard nmbmnl2

Users Manual

Notice Information in this manual is subject to change without notice. NMB TECHNOLOGIES IS NOT LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED IN THIS DOCUMENT; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE OR USE OF THIS MATERIAL. NMB Technologies, Inc. Computer Keyboard User's Manual
To Install the Keyboard: • Turn off computer before installing the keyboard. • Find the keyboard receptacle on the rear panel of the computer. Usually, an icon can be seen to identify the keyboard connector as shown below. • Connect keyboard plug on keyboard cable to the proper receptacle on the computer. • Note: Never attempt to force the plug into the receptacle if it does not fit! To Angle the Keyboard: • Use the fold-out tilt legs, located at the back left and right corners on the underside of the keyboard. Pull the tabs outward to full open position. Do not use excessive force when doing so. Tilt leg Back of Keyboard Tilt leg Underside of Keyboard Front of Keyboard Keyboard Tilt leg

Navigation menu