NMB Technologies RT7D20 Keyboard User Manual nmbmnl2

Users Manual

Notice

Information in this manual is subject to change without notice.

NMB TECHNOLOGIES IS NOT LIABLE FOR TECHNICAL OR

EDITORIAL ERRORS OR OMISSIONS CONTAINED IN THIS

DOCUMENT; NOR FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE FURNISHING,

PERFORMANCE OR USE OF THIS MATERIAL.

NMB Technologies, Inc.

Computer Keyboard

User's Manual

To Install the Keyboard:

• Turn off computer before installing the keyboard.

• Find the keyboard receptacle on the rear panel of the

computer. Usually, an icon can be seen to identify the

keyboard connector as shown below.

• Connect keyboard plug on keyboard cable to the proper

receptacle on the computer.

• Note: Never attempt to force the plug into the receptacle if it

does not fit!

To Angle the Keyboard:

• Use the fold-out tilt legs, located at the back left and right

corners on the underside of the keyboard. Pull the tabs

outward to full open position. Do not use excessive force

when doing so.

Tilt leg Back of Keyboard

Tilt leg

Underside of Keyboard

Front of Keyboard

Keyboard

Tilt leg