NVIDIA P3310 WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth User Manual P3310 Integration Notes
NVIDIA Corporation WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth P3310 Integration Notes
NVIDIA >
Contents
- 1. User_Guide
- 2. P3310_Integration_Notes
P3310_Integration_Notes
![Regulatory Module Integration Instructions This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / ISED (Innovation, Science and Economic Development Canada) certification if they meet the following conditions. Otherwise, additional FCC / ISED approvals must be obtained. • The host product with the module installed must be evaluated for simultaneous transmission requirements. • The users manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / ISED RF exposure guidelines. • To comply with FCC / ISED regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed the following: Peak Antenna Gain Frequency(GHz) 2.4 2.44 2.48 5.2 5.3 5.5 5.6 5.8 Gain(dBi) 2.41 2.81 2.86 5.49 5.57 4.81 4.84 1.99 Antenna Manufacturer: Pulse, Part Number: CW1043, Type: Dipole Antenna Cable Loss Frequency(GHz) 2.4 2.44 2.48 5.2 5.3 5.5 5.6 5.8 Cable Loss (dBm) 0.9 0.9 0.9 2 2 2 2 2 Cable Manufacturer : Pulse, part number: CW9009 • Any device incorporating this module must include an external, visible, permanent marking or label which states: Contains FCC ID: VOB-P3310 Contains IC: 7361A-P3310 The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. If the final host / module combination is intended for use as a portable device (see classifications below) the host manufacturer is responsible for separate approvals for the SAR requirements from FCC Part 2.1093 and RSS-102. Note: In the case where the Host / Module combination has been re-certified the FCC ID shall appear in the product manual.](https://usermanual.wiki/NVIDIA/P3310.P3310-Integration-Notes/User-Guide-3262312-Page-1.png)