NXP Laboratories UK JN5168IT00 JN5168-RD6040-IoT Gateway User Manual JN5168 RD6040 Compliance Statements

NXP Laboratories UK Ltd JN5168-RD6040-IoT Gateway JN5168 RD6040 Compliance Statements

Contents

compliance statements

JN5168-RD6040 Compliance Statements Reference Manual JN-RM-2067 Revision 1.0 10-Oct-2013
Draft JN5168-RD6040 Compliance Statements Reference Manual 2 © NXP Laboratories UK 2013 JN-RM-2067 v1.0
JN5168-RD6040 Compliance Statements Reference Manual Draft JN-RM-2067 v1.0 © NXP Laboratories UK 2013 3 Contents About this Manual 4 Organisation 4 1 Introduction 5 2 European R&TTE Directive 1999/5/EC Statement 6 3 FCC Compliance 7 3.1.1 FCC Interference Statement 7 3.1.2 Antennas Approved by FCC for use with JN5168-RD6040 7 3.1.3 FCC ID and Product Labelling 8 4 Industry Canada Compliance 9 4.1 Industry Canada Statement 9 4.2 Industry Canada End Product Labelling 9 A1: R&TTE Notified Body Opinion 10 A2: FCC Declaration of Conformity 11 A 2.1: FCC Grant 12 A3: Industry Canada Grant 13
Draft JN5168-RD6040 Compliance Statements Reference Manual 4 © NXP Laboratories UK 2013 JN-RM-2067 v1.0 About this Manual This manual is exclusively concerned with the JN5168-RD6040 IoT Gateway and contains compliance documentation, declarations, statements and grants for the FCC and Industry Canada in North America as well as an R&TTE declaration and Notified Body Opinion for Europe. Organisation This manual consists of 4 chapters, as follows:  Chapter 1 Lists the standards applicable to this document and device  Chapter 2 Contains details of the standards applied for the EU region  Chapter 3 Contains details of the standards applied and statements required for use in the USA  Chapter 4 Contains details of the standards applied and statements required for use in Canada
JN5168-RD6040 Compliance Statements Reference Manual Draft JN-RM-2067 v1.0 © NXP Laboratories UK 2013 5 1 Introduction This document contains mandatory statements and declarations for the standards below: 1. The JN5168-RD6040 has been tested against the requirements 1.1 European R&TTE Directive 1999/5/EC. 2. The JN5168-RD6040 IoT Gateway is compliant with CFR 47 FCC part 15B & CFR 47 FCC part 15C regulations and in accordance to FCC Public notice DA00-1407. This document contains details on the conditions applying to this FCC grant and also contains the FCC Declaration of Conformity. 3. The JN5168-RD6040 is compliant with Industry Canada RSS210 (Issue 8, Annex 8) and Industry Canada ICES-003 for Class B devices The JN5168-RD6040 has Industry Canada approval.
Draft JN5168-RD6040 Compliance Statements Reference Manual 6 © NXP Laboratories UK 2013 JN-RM-2067 v1.0 2 European R&TTE Directive 1999/5/EC Statement The JN5168-RD6040 has been tested to and is compliant with the following standards:  Radio EN 300 328 v1.8.1.  EMC, EN 301 489-17 v2.1.1  Basic Safety Assessment (BSA) EN 60950-1:2006 The product is subject to a Notified Body Opinion which may be found in Appendix A1. The JN5168-RD6040 was tested and approved for use with the supplied 2dBi antenna. Brand Model Number Description Gain (dBi) Connector type 1 Aveslink Technology, Inc E-2410-GC Vertical - swivel 2 RP-SMA 2 Aveslink Technology, Inc E-2820-GC Vertical - swivel 2 RP-SMA 3 Embedded Antenna Design FBKR35068-RS-KR Vertical - knuckle antenna 2 RP-SMA 4 Sunlight Technology SLA-100020108 Vertical - swivel 2 RP-SMA Table 1: Approved Antennas ! Alternative vertical antennas may be used provided that the gain of the replacement antenna does not exceed 2dBi.
JN5168-RD6040 Compliance Statements Reference Manual Draft JN-RM-2067 v1.0 © NXP Laboratories UK 2013 7 3 FCC Compliance The JN5168-RD6040 IoT Gateway is compliant with CFR 47 FCC part 15B & CFR 47 FCC part 15C regulations and in accordance to FCC Public notice DA00-1407. 3.1.1 FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 3.1.2 Antennas Approved by FCC for use with JN5168-RD6040 This device has been designed to operate with the antennas listed in Table 1, and having a maximum gain of 2 dBi. Alternative vertical antennas may be used provided that the gain does not exceed 2 dBi. Antennas having a gain greater than 2 dBi are strictly prohibited for use with this FCC ID. The required antenna impedance is 50 ohms. ! Alternative vertical antennas may be used provided that the gain of the replacement antenna does not exceed 2dBi.
Draft JN5168-RD6040 Compliance Statements Reference Manual 8 © NXP Laboratories UK 2013 JN-RM-2067 v1.0 3.1.3 FCC ID and Product Labelling The FCC ID for the JN5168-RD6040 IoT Gateway is TYOJN5168IT00 This is clearly labelled as shown in Figure 1 Figure 1: JN5168-RD6040 Label
JN5168-RD6040 Compliance Statements Reference Manual Draft JN-RM-2067 v1.0 © NXP Laboratories UK 2013 9 4 Industry Canada Compliance 4.1 Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device has been designed to operate with the antennas listed in Table 1, and having a maximum gain of 2 dBi. Alternative vertical antennas may be used provided that the gain does not exceed 2 dBi. The required antenna impedance is 50 ohms. ! Alternative vertical antennas may be used provided that the gain of the replacement antenna does not exceed 2dBi. As long as the above condition is met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc). 4.2 Industry Canada End Product Labelling The Industry Canada ID for the JN5168-RD6040 IoT Gateway is IC: 7438A-CYO5168IT00 This is clearly labelled as shown in Figure 1
Draft JN5168-RD6040 Compliance Statements Reference Manual 10 © NXP Laboratories UK 2013 JN-RM-2067 v1.0 A1: R&TTE Notified Body Opinion The Notified Body Opinion is embedded into this document. To view the document click the icon below. TRA-015935 RTTE NB Opinion.pdf
JN5168-RD6040 Compliance Statements Reference Manual Draft JN-RM-2067 v1.0 © NXP Laboratories UK 2013 11 A2: FCC Declaration of Conformity JN5139-000-M00 JN5139-000-M01 JN5139-000-M02 JN5139-000-M03 JN5139-000-M04 FCC COMPLIANCE INFORMATION STATEMENT DECLARATION OF CONFORMITY Manufacturer: NXP Semiconductors Netherlands B.V Responsible Party in the USA: Niel P Smith NXP Semiconductors 411 E. Plumeria Drive San Jose CA 95134 USA Tel 001 408-518 5302 Product: JN5168-RD6040-IoT-Gateway Authorisation Procedure: Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. We, NXP Laboratories (UK) Ltd, have determined that the above named equipment has been shown to comply with the applicable technical standards. Furthermore, we warrant that each unit of equipment marketed is identical to the unit tested and found acceptable with the standards. The records maintained continue to reflect the equipment being produced within the variation that can be expected due to quantity production and testing on a statistical basis. NXP Semiconductors BVJN5168-RD6040-IoT-Gateway Sheffield, September 24th, 2013 Conrad Farlow, Senior RF Hardware Engineer, NXP Laboratories Ltd TELEPHONE: +44 (0) 114 281 2655 FACSIMILE: +44 (0) 114 281 2951 E MAIL: info@jennic.com WEB: www.jennic.com NXP LABORATORIES (UK) LTD FURNIVAL STREET SHEFFIELD S1 4QT UNITED KINGDOM
Draft JN5168-RD6040 Compliance Statements Reference Manual 12 © NXP Laboratories UK 2013 JN-RM-2067 v1.0 A 2.1: FCC Grant The FCC grant is embedded into this document. To view the document click the icon below. GRANT TO BE EMBEDDED WHEN AVAILABLE
JN5168-RD6040 Compliance Statements Reference Manual Draft JN-RM-2067 v1.0 © NXP Laboratories UK 2013 13 A3: Industry Canada Grant The Industry Canada grant is embedded into this document. To view the document click the icon below. GRANT TO BE EMBEDDED WHEN AVAILABLE
Draft JN5168-RD6040 Compliance Statements Reference Manual 14 © NXP Laboratories UK 2013 JN-RM-2067 v1.0 Revision History Version Date Description 1.0 23-Oct-2013 First release
JN5168-RD6040 Compliance Statements Reference Manual Draft JN-RM-2067 v1.0 © NXP Laboratories UK 2013 15 Important Notice Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. NXP Laboratories UK Ltd (Formerly Jennic Ltd) Furnival Street Sheffield S1 4QT United Kingdom Tel: +44 (0)114 281 2655 Fax: +44 (0)114 281 2951 For the contact details of your local NXP office or distributor, refer to: www.nxp.com/jennic

Navigation menu