Nad 2400 Users Manual

Nad-Electronics-2400-Users-Manual-475656 nad-electronics-2400-users-manual-475656

24001 4dc19313-eb88-4810-95c6-23f284a01b9e NAD Stereo Amplifier 2400 User Guide |

: Nad Nad-2400-Users-Manual-493106 nad-2400-users-manual-493106 nad pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

2400 Stereo Power Amplifier
Date of manufacture : ?
Please note that this document contains the text from the original product brochure, and some technical statements may now be out of date

The 2400 has the same features and useful flexibility as the 2100 but produces significantly higher levels
of real speaker-driving power. With continuous test tones its output is conservatively rated at IOU watts
per channel, while its Power Envelope circuitry produces 370 to 440 watts channel of tone-burst power
for music.
The high-current output stage of the 2400 delivers peak currents up to 40 amperes for precise control
of voice-coil motion with speaker impedances as low as 2 ohms. In bridged mono operation the 2400
produces over 2OO watts of steady-state power and over 800 watts of dynamic tone-burst power. To
enable the user to make the fullest use of the available power, a warning light illuminates if the
amplifier is over-driven into distortion or exhibits any deviation from linearity. A high-precision circuit
continually compares the input and output signals and flashes the LED if a potentially audible difference
is detected.
Each stage of the amplifier (input, driver, and output) is individually decoupled from the power supply to
prevent the dynamic supply-modulation distortion that causes some amplifiers to sound “veiled” and
muddy.

POWER AMP SECTION
Continuous output power into 8Ω *
Rated distortion (THD 20Hz - 20kHz)
Clipping power (maximum continuous power per channel)
IHF Dynamic headroom at 8Ω
IHF dynamic power (maximum short term power per channel)

Damping factor (ref. 8Ω, 50Hz)
Input impedance
Input sensitivity (for rated power into 8Ω)
Frequency response
Signal/noise ratio
THD

8Ω
4Ω
2Ω

ref. 1W
ref. rated power

(20Hz - 20kHz)

Bridged Mode
Continuous output power into 8Ω *
IHF Dynamic headroom at 8Ω
IHF dynamic power (maximum short term power per channel)

PHYSICAL SPECIFICATIONS
Dimensions (W x H x D)
Net weight
Shipping weight
Power consumption (120 ~ 240V, 50/60Hz)

8Ω
4Ω

100W (20dBW)
0.03%
130W
+5.7dB
370W (25.7dBW)
400W (26dBW)
440W (26.4dBW)
>100
20kΩ / 600pF
1V
3Hz - 100kHz / +0, -3dBdB
98dB
118dB
<0.03%

200W (23dBW)
+6dB
800W (29dBW)
880W (29.4dBW)

435 x 127 x 385mm
10kg
12kg
390VA

* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.

© NAD Electronics. All rights reserved. E & OE



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Create Date                     : 1999:02:06 19:04:37
Producer                        : Acrobat Distiller 3.02 for Power Macintosh
Author                          : 
Creator                         : QuarkXPress: AdobePS 8.5.1
Title                           : 2400

EXIF Metadata provided by EXIF.tools