National Instruments Module Scxi 1125 Users Manual User
SCXI-1125 to the manual 546db066-d660-4226-b8dc-b7c631d7867e
2015-02-05
: National-Instruments National-Instruments-Module-Scxi-1125-Users-Manual-493748 national-instruments-module-scxi-1125-users-manual-493748 national-instruments pdf
Open the PDF directly: View PDF
Page Count: 101 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- SCXI-1125 User Manual
- Support
- Important Information
- Conventions
- Contents
- Chapter 1 About the SCXI-1125
- What You Need to Get Started
- National Instruments Documentation
- Installing Application Software, NI-DAQ, and the DAQ Device
- Installing the SCXI-1125 Module into the SCXI Chassis
- Connecting the SCXI-1125 in an SCXI Chassis to an E/M Series DAQ Device for Multiplexed Scanning
- Connecting the SCXI-1125 in a PXI/SCXI Combination Chassis to an E/M Series DAQ Device for Multiplexed Scanning
- Connecting the SCXI-1125 to a n E/M Series DAQ Device for Parallel Scanning
- Verifying the SCXI-1125 Installation in Software
- Troubleshooting the Self-Test Verification
- Chapter 2 Connecting Signals
- Chapter 3 Configuring and Testing
- Chapter 4 Theory of Operation
- Chapter 5 Using the SCXI-1125
- Temperature Measurements Using Thermocouples
- Making High-Voltage Measurements
- Developing Your Application in NI-DAQmx
- Developing Your Application in Traditional NI-DAQ (Legacy)
- Traditional NI-DAQ (Legacy) in LabVIEW
- Configure the SCXI-1125 Settings Using Traditional NI-DAQ (Legacy) in LabVIEW
- Configure, Start Acquisition, and Take Readings Using Traditional NI-DAQ (Legacy) in LabVIEW
- Convert Scaling Using Traditional NI-DAQ (Legacy) in LabVIEW
- Analyze and Display Using Traditional NI-DAQ (Legacy) in LabVIEW
- Traditional NI-DAQ (Legacy) in Text-Based ADEs
- Configuring System Settings Using Traditional NI-DAQ (Legacy) C API
- Configure Module Settings Using Traditional NI-DAQ (Legacy) C API
- Perform Offset Null Compensation Using Traditional NI-DAQ (Legacy) C API
- Perform Acquisition Using Traditional NI-DAQ (Legacy) C API
- Perform Scaling, Analysis, and Display
- Using Software for Multiplexed Scanning
- Performing a Multiplexed Scan
- Using Software for Parallel Scanning
- Other Application Documentation and Material
- Calibration
- Appendix A Specifications
- Appendix B Using SCXI Channel Strings with Traditional NI-DAQ (Legacy) 7.0 or Later
- Appendix C Removing the SCXI-1125
- Appendix D Common Questions
- Glossary
- Index