Nec Express5800 Gt110D S Installation Guide Express5800/GT110d, S, R110d 1E, E110d 1

2015-05-18

• Cover
• Documents Provided with This Product
• Contents
• Notations Used in This Document
  • Notations used in the text
  • Optical disk drives
  • Hard Disk Drives
  • Removable media
  • Abbreviations of Operating Systems (Windows)
• Trademarks
• Regulatory Notices
• Warnings and Additions to This Document
  • Latest editions
• Chapter 1. Installing Windows
  • 1. Before Starting Setup
    • 1.1 Starting EXPRESSBUILDER
      • 1.1.1 When using the EXPRESSBUILDER DVD
      • 1.1.2 When using Internal Flash Memory
    • 1.2 Service Pack Support
    • 1.3 Large-Capacity Storage Controllers Supported by EXPRESSBUILDER
    • 1.4 When Using a Large-Capacity Storage Controller Not Supported by EXPRESSBUILDER
  • 2. Setting Up the Operating System
  • 3. Setting Up Windows Server 2008 R2
    • 3.1 Before Starting Setup
    • 3.2 Setup with EXPRESSBUILDER
      • 3.2.1 Setup flow
      • 3.2.2 Setup procedure
    • 3.3 Setup with OS Standard Installer
      • 3.3.1 Setup flow
      • 3.3.2 Requirements for Setup with OS standard installer
      • 3.3.3 Setup procedure
    • 3.4 Installing the Starter Pack
      • 3.4.1 When using the EXPRESSBUILDER DVD
      • 3.4.2 When using Internal Flash Memory
    • 3.5 Setting Up Device Drivers
      • 3.5.1 Installing the LAN and BACS (teaming) drivers
      • 3.5.2 Setting up LAN drivers
      • 3.5.3 Setting up team/LiveLink
      • 3.5.4 Graphics accelerator driver
      • 3.5.5 When using a SCSI controller (N8103-75/107)
      • 3.5.6 When using a SAS controller (N8103-104A/142)
      • 3.5.7 When using a RAID Controller (N8103-135)
      • 3.5.8 When using a Fibre Channel controller (N8190-127/131/153/154)
    • 3.6 Installing the Bundled Software
    • 3.7 License Authentication
    • 3.8 Installation When Multiple Logical Drives Exist
  • 4. Setting Up Windows Server 2008
    • 4.1 Before Starting Setup
    • 4.2 Setup with EXPRESSBUILDER
      • 4.2.1 Setup flow
      • 4.2.2 Setup procedure
    • 4.3 Setup with OS Standard Installer
      • 4.3.1 Setup flow
      • 4.3.2 Requirements for Setup with OS standard installer
      • 4.3.3 Setup procedure
    • 4.4 Installing the Starter Pack
      • 4.4.1 When using the EXPRESSBUILDER DVD
      • 4.4.2 When using Internal Flash Memory
    • 4.5 Setting Up Device Drivers
      • 4.5.1 Installing the LAN and BACS (teaming) drivers
      • 4.5.2 Setting up LAN drivers
      • 4.5.3 Setting up team/LiveLink
      • 4.5.4 Graphics accelerator driver
      • 4.5.5 When using a SCSI controller (N8103-75/107)
      • 4.5.6 When using a SAS controller (N8103-104A/142)
      • 4.5.7 When using a RAID Controller (N8103-135)
      • 4.5.8 When using a Fibre Channel controller (N8190-127/131/153/154)
    • 4.6 Specifying PAE Option
    • 4.7 Installing the Bundled Software
    • 4.8 License Authentication
    • 4.9 Installation When Multiple Logical Drives Exist
  • 5. Setting Up Windows Server 2003 R2 x64 Edition
    • 5.1 Before Starting Setup
    • 5.2 Setup with OS Standard Installer
      • 5.2.1 Setup flow
      • 5.2.2 Requirements for Setup with OS standard installer
      • 5.2.3 Setup procedure
    • 5.3 Installing the Starter Pack (Service Pack)
      • 5.3.1 Procedures for applying the Starter Pack and Windows x64 hotfix (KB) 921411
      • 5.3.2 Recovery process
    • 5.4 Setting Up Device Drivers
      • 5.4.1 Installing the LAN and BACS (teaming) drivers
      • 5.4.2 Setting up LAN drivers
      • 5.4.3 Setting up team/LiveLink
      • 5.4.4 When using a SCSI controller (N8103-75/107)
      • 5.4.5 When using a SAS controller (N8103-104A/142)
      • 5.4.6 When using a RAID Controller (N8103-135)
      • 5.4.7 Graphics accelerator driver
    • 5.5 Installing the Bundled Software
    • 5.6 License Authentication
    • 5.7 Installation When Multiple Logical Drives Exist
  • 6. Setting Up Windows Server 2003
    • 6.1 Before Starting Setup
    • 6.2 Setup with OS Standard Installer
      • 6.2.1 Setup flow
      • 6.2.2 Items necessary for installation from an OS media
      • 6.2.3 Setup procedure
    • 6.3 Installing the Starter Pack (Service Pack)
      • 6.3.1 Procedure to apply Windows Server 2003 hotfix: KB921411
      • 6.3.2 Recovery process
    • 6.4 Setting Up Device Drivers
      • 6.4.1 Installing the LAN and BACS (teaming) drivers
      • 6.4.2 Setting up LAN drivers
      • 6.4.3 Setting up team/LiveLink
      • 6.4.4 Graphics accelerator driver
      • 6.4.5 When using a SCSI controller (N8103-75/107)
      • 6.4.6 When using a SAS controller (N8103-104A/142)
      • 6.4.7 When using a RAID Controller (N8103-135)
    • 6.5 Specifying PAE Option
    • 6.6 Installing the Bundled Software
    • 6.7 License Authentication
    • 6.8 Installation When Multiple Logical Drives Exist
  • 7. Setup for Solving Problems
    • 7.1 Specifying Memory Dump Settings (Debug Information)
      • 7.1.1 For Windows Server 2008 R2
      • 7.1.2 For Windows Server 2008
      • 7.1.3 For Windows Server 2003
    • 7.2 How to Create a User-mode Process Dump File
      • 7.2.1 For Windows Server 2008 R2 and Windows Server 2008
      • 7.2.2 For Windows Server 2003 (setting up Dr. Watson)
    • 7.3 Installing Network Monitor
      • 7.3.1 For Windows Server 2008 R2 and Windows Server 2008
      • 7.3.2 For Windows Server 2003
  • 8. Windows OS Parameter File
    • 8.1 Creating a Parameter File
      • 8.1.1 How to create a parameter file
• Chapter 2. Installing the Bundled Software
  • 1. Bundled Software for the Server
    • 1.1 NEC ESMPRO Agent (for Windows)
    • 1.2 NEC ESMPRO Agent Extension
    • 1.3 BMC Configuration
    • 1.4 NEC ExpressUpdate Agent
    • 1.5 Universal RAID Utility
      • 1.5.1 Setup of Universal RAID Utility
      • 1.5.2 Management by NEC ESMPRO Manager
    • 1.6 NEC Product Info Collection Utility
      • 1.6.1 Installation
      • 1.6.2 Uninstallation
  • 2. Bundled Software for PC for Management
    • 2.1 NEC ESMPRO Manager