Nec Nd 71762E Users Manual NEAX 2400 IPX No.7 CCIS System

2015-01-24

• No.7 CCIS System Manual
  • CHAPTER 1 INTRODUCTION
    • 1. GENERAL
    • 2. HOW TO FOLLOW THE MANUAL
      • 2.1 Configuration of the No. 7 CCIS System Manual
  • CHAPTER 2 GENERAL INFORMATION FOR CCIS
    • 1. GENERAL
    • 2. DESCRIPTION OF CCIS
    • 3. SYSTEM CONFIGURATION
      • 3.1 Outline
    • 4. NETWORK CONFIGURATION
      • 4.1 Types of Network
      • 4.2 Examples of Network Configuration
        • 4.2.1 Main-Satellite Configuration
        • 4.2.2 Campus Configuration
        • 4.2.3 Main-Remote Configuration
      • 4.3 CCIS Network Modes
        • 4.3.1 Associated Mode
        • 4.3.2 Quasi-Associated Mode
      • 4.4 CCIS Network Redundancy
    • 5. DIGITAL NETWORK AND NETWORK SYNCHRONIZATION
      • 5.1 Outline
      • 5.2 Office Rank
        • 5.2.1 Source Office
        • 5.2.2 Sub-Source Office
        • 5.2.3 Receiver Office and Local Receiver Office
      • 5.3 Clock Pulses from M-OSC/EXT. OSC and Connection with PLO/OSC
      • 5.4 Clocks Extracted from DTI and Connection of PLO/TSW
      • 5.5 Automatic Clock Route Changeover
        • 5.5.1 Automatic Route Changeover on Fault to M-OSC/EXT. OSC of Input Clock Route
        • 5.5.2 Automatic Route Changeover on Fault to DTI of Input Clock Route
    • 6. NETWORK THROUGH FCCS GROUPS AND NEAX2000 IPS Internet Protocol Server
      • 6.1 Network Configuration
      • 6.2 Conditions for Network Establishment
      • 6.3 FCCS Group (FUG)
      • 6.4 Interactions
  • CHAPTER 3 SWITCH SETTING SHEETS
    • 1. GENERAL
    • 2. LIST OF CIRCUIT CARDS
  • CHAPTER 4 INSTALLATION PROCEDURE
    • 1. GENERAL
    • 2. PRECAUTIONS ON INSTALLATION
    • 3. INSTALLATION PROCEDURE
      • 3.1 General Flow of Installation Procedure
      • 3.2 Setting of Switch Positions and Mounting of the Circuit Cards
      • 3.3 Cable Termination and Cross Connection from the MDF to the DSU
      • 3.4 Front Cable Connection between DTI and CCH
      • 3.5 Cable Running from PBX to the MODEM for Analog CCIS Line
  • CHAPTER 5 INSTALLATION TEST PROCEDURE
    • 1. GENERAL
    • 2. INSTALLATION TEST PROCEDURE
      • 2.1 Overall Test for CCIS Line
        • 2.1.1 Overall Test of CCIS Tie Line Outgoing Call
        • 2.1.2 Overall Test of CCIS Tie Line Incoming Call
        • 2.1.3 Test of Connection and Alternate Routing to All Tie Lines
        • 2.1.4 Test of Tandem Connection to Tie Line
        • 2.1.5 PAD Setting
      • 2.2 CCIS Service Feature Functional Test
        • 2.2.1 Test of Interoffice Station to Station Connection
        • 2.2.2 Test of Outgoing Call Connection to Tie Line Trunk
        • 2.2.3 Test of Transfer Services
        • 2.2.4 Test of Services from ATTCON
        • 2.2.5 Test of other Services
    • 3. TEST RESULT REPORT
      • 3.1 CCIS Service Feature Functional Test
        • 3.1.1 Test of Interoffice Station to Station Connection
        • 3.1.2 Test of Outgoing Call Connection to Tie Line Trunk
        • 3.1.3 Test of Transfer Services
        • 3.1.4 Test of Services from ATTCON
        • 3.1.5 Test of Other Services
  • CHAPTER 6 BASIC DATA ASSIGNMENT
    • 1. GENERAL
    • 2. DATA ASSIGNMENT
      • 2.1 Port Allocation and Related Command
      • 2.2 Basic Data Assignment Procedure
      • 2.3 FCCS Data Assignment Procedure
  • CHAPTER 7 CCIS SERVICE FEATURES
    • 1. GENERAL
  • CHAPTER 8 MAINTENANCE PROCEDURE
    • 1. GENERAL
    • 2. SYSTEM MESSAGES
      • 2.1 The Relationship between System Messages and Lamp Indications
      • 2.2 Technical Terms for Explaining Message Detail Data
        • 2.2.1 Circuit Card Mounting Information
      • 2.3 How to Proceed with Diagnostic Work from System Message
      • 2.4 System Messages
    • 3. CCIS (Common Channel Interoffice Signaling) Line Fault
      • 3.1 Check Point
      • 3.2 CCIS Line Control
      • 3.3 Fault Repair Procedure for Digital CCIS Line
      • 3.4 Fault Repair Procedure for Analog CCIS Line
    • 4. CCIS LINE OPERATING MODE CONTROL
    • 5. INSERTION/EXTRACTION OF CIRCUIT CARDS
      • 5.1 CCH Circuit Card
      • 5.2 DTI Circuit Card
      • 5.3 CCT Circuit Card
      • 5.4 PLO/OSC Circuit Card