Nedap N V DVD31356 Inductive RFID Card Reader User Manual User 02

N. V. Nederlandsche Apparatenfabriek NEDAP Inductive RFID Card Reader User 02

Contents

User 02

pg 45 antennabeyond the book
antenna systemsthe architect’s favoriteit is hard to believe we have managed to fit this much performance into something as thin as this.our antennae are especially designed to blend into your library whilst maintaining the open character of your building. with its sleek design (only 20mm width) and high performance, the fully transparent gates are an absolute must-have for every library. qualityAll our antennae are fully produced in-house and are checked to make sure performance is always top notch. Where necessary, our highly qualified installation teams can even adjust the antennae on-site to adjust for external disturbances in terms of metal or other electronic fields.
options- Visual alarm, light- Integral customer counterbenefits- Attractive design- Inconspicious- Easy to install- High detection ratesfcc and ic certifications for the conected transceiverFCC for USA according to Part 15 with FCC ID: CGDDVD31356IC for Canada according to RS-210 with IC: 1444A-DVD31356Part 15.19(3) and RSS_Gen LabellingThis device complies with part 15 of the FCC Rules and to RSS-210 of Industry Canada.Operating is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Cet appareil se conforme aux normes RSS 210 exemptés de license du Industry Canada. L’opération est soumis aux deux conditions suivantes :(1) cet appareil ne doit causer aucune interférence, et (2) cet appareil doit accepter n’importe quelle interférence, y inclus interférence qui peut causer une opération non pas voulu de cet appareil.Warning (part15.21) Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.contactNedap LibrixParallelweg 2d7141 DC GroenloThe NetherlandsT +31 (0) 544 47 11 11 F +31 (0) 544 46 58 14E info@nedaplibrix.comwww.nedaplibrix.compg 13.56 mhz antennaarticles which contain a label with an activated anti-theft function willcause an alarm to sound if a borrower or visitor carrying the articleswalks between the antennae. since the anti-theft function is deactivatedwhen books are checked out in the correct manner these articles do notcause a false alarm.The anti-theft (EAS) antenna system consists of at least two antennae installed to form a passageway of more than one meter wide. The standard systems can be expanded to a maximum of four antennae for use with wide entrances and exits. Systems with more than four antennae are also available on request.visual alarmOur gates can be equipped with an integrated visual alarm. When the alarm goes off, a red light that is built into each antenna will flash. Not only will this enable you to notify the hearing impaired of the alarm, but this will also create greater awareness with your staff and other visitors.integrated customer countingThe numbers tell the tale. With integrated customer counting and a direct link into Librix Online, you can get direct insight into how many visitors you have had in your library. Because of the fact that the customer counting units are only installed 93cm from the floor, children are also counted.how much service do you provide?With our interactive tool Librix Online, you can even make a distinction between people that have entered your library and the number of unique members that actually have lent a book. As a result, this great tool provides you with a clear overview of how many people visit your library just to read a newspaper, do research or enjoy other services you provide. Because you want to get credit for what you do.relayAll antennae-readers are equipped with a relay which enables connection to external hardware, like lights, doors and/or gates.be flexibleSometimes you need to be able to easily remove an antenna because of logistics. Especially for these situations, we can provide you with an optional foot which allows you to connect and deconnect an antenna, just like you would remove a computer from a docking station.Quick, easy and safe.
PHYSICAL SPECIFICATIONS OF THE PG45 ANTENNAArticle numbers: 9940448 / 9940456 (2 loop / 3 loop) Dimensions (mm): 1665 x 480 x 100 (l x w x h) Material: Metal / Plexiglas Color: Transparent Weight: ca. 29 kg Function: Detects labels with EAS = on / AFI 07 HEX Optional expansions: - Light alar m, integr al - Integral customer counter Identification %: Dependant on label quality / environmental inf luences ELECTRICAL SPECIFICATIONS READERArticle number: 9926798 Supply voltage: 100 - 230 V ac, 50-60 Hz Operating voltage: 24 V Power consumption: 45 Watt Le ng th po wer c abl e: 1 .8 m . CONNECTION SPECIFICATIONSRF c onnec ti on: 50 O hm BN C c oa x ENVIRONMENTAL SPECIFICATIONSOperating temperature: +10 / +45 °C Storage temperature: -10 / +55 °C Max. distance between two antennas: 1.05 m RFID SPECIFICATIONSTechnology: RFiD Frequency: Standard: 13.56 MHz Antenna power (electrical): Max. 8 Watt RF antenna power: 37 µW Identifies: ISO 15693 / ISO 18000-3.1 EAS-function: Yes, based on EAS-bits and/or AFI WARRANTY / CERTIFICATESCertificate: CE / EMC Warranty: 1 year Approvals of the power adaptor: - c UL us according to UL/CSA 60950-1 - Japan PSE - CE according to EN60950-1 - FCC compliant Version 1.0Specifications are subject to change without notice20181.51665428143480NOTE: Do not use these drawings for installation purposes. Ask your local supplier for technical drawings.
www.nedaplibrix.com

Navigation menu