Nedap N V INVEXS170 Inductive Proximity Card Reader User Manual quick start guide

N. V. Nederlandsche Apparatenfabriek NEDAP Inductive Proximity Card Reader quick start guide

Contents

quick start guide

Copyright © by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system without the prior written permission of NEDAP.description:CUBE Card reader MK170W / MK170B | art no. 9205454 - 9206167doc. article no: 5279216 chk:rev. : Cdrw: CB 2012/07/05sheet: 45.01 of 1drawing: T5279-216CUBE Card reader MK170W / MK170B9205454 CUBE Card reader MK170W 01 4x screw (not included)cable outlet 40 x 40 mmRS485 - 2 x 2 x 0.25mm² shielded.cable specications :Always disconnect the supply voltage before you install or modify the connection.Use an ESD-bracelet during the instalment. Cube products contain components which are sensitive to electrostatic discharge.Note :Date : 12 October 2010 Version 4 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © Nedap N.V., IDEAS P.O. Box 103 NL-7140 AC GROENLO The Netherlands Page 1 of 4Part.no.: 5265800Invexs 170 readers Mifare Nedap dual technology readers GENERALThe Invexs 170 reader series is capable of reading (simultaneously) Nedap, Mifare and DESFire credentials due to its dual reader technology. The Invexs can read Mifare, DESFire and Nedap cards, and is equipped with keypad and / or a display. The Invexs output can be set to either Wiegand, XS RF modulation or RS485 protocol (plain or encrypted) Functionality and output are determined by the configuration of the Invexs reader. The configuration is defined using the programm AEreco, and deployed by the configuration card or via AEmon. (More information about configurations can be found in ConvexsInvexs_InstallGuide_E.)Three LED’s (red, green, blue) and beeper are included (display version has no LED). Ciphers of the keypad versions light up after activation, so when not active the ciphers are not visible. Back panel is available in two colours, black and white (e.g. MNK170B, MNK170W) DIMENSIONSMOUNTING PROCEDURE INVEXS For mounting the Invexs, the back plane must be placed on the wall first. For removing the back plane from the Invexs, unscrew the two screws (1) at the bottom of the Invexs and push the front cover up (2). Mount the back plane using the 4 holes. Connections must be made on the connector on the backside of the front. After making the connections, replace the front and tighten up the two screws at the bottom of the Invexs. ®Installation sheet75.2 52406.84.820.312040170.5 24.51.50.5Dimensions: 171 x 75 x 25 mm. 4 mounting holes available at 52 x 120 mm Cable outlet: 40 x 40 mm 123456789C0EUn screwPush up12123456789C0E123456789C0EDate : 12 October 2010 Version 4 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © Nedap N.V., IDEAS P.O. Box 103 NL-7140 AC GROENLO The Netherlands Page 1 of 4Part.no.: 5265800Invexs 170 readers Mifare Nedap dual technology readers GENERALThe Invexs 170 reader series is capable of reading (simultaneously) Nedap, Mifare and DESFire credentials due to its dual reader technology. The Invexs can read Mifare, DESFire and Nedap cards, and is equipped with keypad and / or a display. The Invexs output can be set to either Wiegand, XS RF modulation or RS485 protocol (plain or encrypted) Functionality and output are determined by the configuration of the Invexs reader. The configuration is defined using the programm AEreco, and deployed by the configuration card or via AEmon. (More information about configurations can be found in ConvexsInvexs_InstallGuide_E.)Three LED’s (red, green, blue) and beeper are included (display version has no LED). Ciphers of the keypad versions light up after activation, so when not active the ciphers are not visible. Back panel is available in two colours, black and white (e.g. MNK170B, MNK170W) DIMENSIONSMOUNTING PROCEDURE INVEXS For mounting the Invexs, the back plane must be placed on the wall first. For removing the back plane from the Invexs, unscrew the two screws (1) at the bottom of the Invexs and push the front cover up (2). Mount the back plane using the 4 holes. Connections must be made on the connector on the backside of the front. After making the connections, replace the front and tighten up the two screws at the bottom of the Invexs. ®Installation sheet75.2 52406.84.820.312040170.5 24.51.50.5Dimensions: 171 x 75 x 25 mm. 4 mounting holes available at 52 x 120 mm Cable outlet: 40 x 40 mm 123456789C0EUn screwPush up12123456789C0E123456789C0Ewall-mounting-AYYYY-MM-DDDocumentation released-Ref.Nr.REV.DATEDESCRIPTIONAPPROVEDN/A DIM. IN MMROUGHNESS ACC.ISO 1302 in µMGENERAL TOLERANCES SCALE: FORMAT: DRAWING: Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of thisdrawing may be reproduced or distributed in any form or by any means, or storedin a data base or retrieval system without the prior written permission of NEDAP.ABCDEF6321FEDCBA5678A3Assem mnk170N/AA.01 ARTICLE NUMBER REV.ISO AGROENLO HOLLAND SHEET:4785432110.01 OF 11:1± 1°± 0.2DESCRIPTIONLIN.ANG.N/A?????? DRW: CHCK:YYYY-MM-DDYYYY-MM-DDYYYY-MM-DD DSGN:black coverwhite coverTORX 20AYYYY-MM-DDDocumentation releasedRef.Nr.REV.DATEDESCRIPTIONAPPROVEDN/A DIM. IN MMROUGHNESS ACC.ISO 1302 in µMGENERAL TOLERANCES SCALE: FORMAT: DRAWING: Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of thisdrawing may be reproduced or distributed in any form or by any means, or storedin a data base or retrieval system without the prior written permission of NEDAP.ABCDEF4321FEDCBA1234A43854418N/AA ARTICLE NUMBER REV.ISO AGROENLO HOLLAND SHEET:N/A± 0.2± 1°1:110.01 OF 1DESCRIPTIONLIN.ANG. DSGN:???? DRW: CHCK:YYYY-MM-DDYYYY-MM-DDYYYY-MM-DD??9206167 CUBE Card reader MK170Bblack coverblack cover0203 04GROENLO - HOLLAND
18910A1A2A3A4-AYYYY-MM-DDDocumentation released-Ref.Nr.REV.DATEDESCRIPTIONAPPROVEDN/A DIM. IN MMROUGHNESS ACC.ISO 1302 in µMGENERAL TOLERANCES SCALE: FORMAT: DRAWING: Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of thisdrawing may be reproduced or distributed in any form or by any means, or storedin a data base or retrieval system without the prior written permission of NEDAP.ABCDEF6321FEDCBA5678A3cubeN/AA.01 ARTICLE NUMBER REV.ISO AGROENLO HOLLAND SHEET:4785432110.01 OF 11:1± 1°± 0.2DESCRIPTIONLIN.ANG.N/A?????? DRW: CHCK:2009-MM-DD2009-MM-DD2009-MM-DD DSGN:connect Card reader to the CUBE Core or CUBE Access Plus051234-AYYYY-MM-DDDocumentation released-Ref.Nr.REV.DATEDESCRIPTIONAPPROVEDN/A DIM. IN MMROUGHNESS ACC.ISO 1302 in µMGENERAL TOLERANCES SCALE: FORMAT: DRAWING: Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of thisdrawing may be reproduced or distributed in any form or by any means, or storedin a data base or retrieval system without the prior written permission of NEDAP.ABCDEF6321FEDCBA5678A3Assem21N/AA.01 ARTICLE NUMBER REV.ISO AGROENLO HOLLAND SHEET:4785432110.01 OF 11:1± 1°± 0.2DESCRIPTIONLIN.ANG.N/A?????? DRW: CHCK:YYYY-MM-DDYYYY-MM-DDYYYY-MM-DD DSGN:1 2 3 4MK170W MK170B2!Blank wireReader BrownWhite GreenYellow: +12V: Ground GND: RS485 +: RS485 -To door lockerTo door lockerconnectors Use crimp connectors and isolationfor wire extensionConnect reader(s)See wiring instructions readerCable Signal name Reader cableWhite Reader Ground BlackBrown Reader Power +12V RedGreen Reader RS485 + YellowYellow Reader RS485 - BlueSee also pre-installation1Cable shield must be connected to Power GND of CUBE Card-reader (A2) and GND of external device (metal case)FCC ID: CGDINVEXS170 and IC: 1444A-INVEXS170Compliance statements (part15.19)This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Cet appareil se conforme aux normes RSS210 exemptés de license du Industry Canada. L’opération est soumis aux deux conditions suivantes:(1) cet appareil ne doit causer aucune interférence, et (2) cet appareil doit accepter n’importe quelle interférence, y inclus interférence qui peut causer une opération non pas voulu de cet appareil.Warning (part15.21)Changes or modications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu