Nedap N V INVEXS170 Inductive Proximity Card Reader User Manual quick start guide

N. V. Nederlandsche Apparatenfabriek NEDAP Inductive Proximity Card Reader quick start guide

Contents

quick start guide

Copyright © by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a database or retrieval system without the prior written permission of NEDAP.
description:
CUBE Card reader MK170W / MK170B | art no. 9205454 - 9206167
doc. article no: 5279216
chk:
rev. : C
drw: CB 2012/07/05
sheet: 45.01 of 1
drawing: T5279-216
CUBE Card reader MK170W / MK170B
9205454 CUBE Card reader MK170W
01
4x screw
(not included)
cable outlet
40 x 40 mm
RS485 - 2 x 2 x 0.25mm²
shielded.
cable specications :
Always disconnect the supply voltage before you install or modify the connection.
Use an ESD-bracelet during the instalment. Cube products contain components which
are sensitive to electrostatic discharge.
Note :
Date : 12 October 2010 Version 4
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other
right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without
notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher.
© Nedap N.V., IDEAS P.O. Box 103 NL-7140 AC GROENLO The Netherlands Page 1 of 4
Part.no.: 5265800
Invexs 170 readers
Mifare Nedap dual technology readers
GENERAL
The Invexs 170 reader series is capable of reading
(simultaneously) Nedap, Mifare and DESFire credentials due to
its dual reader technology. The Invexs can read Mifare,
DESFire and Nedap cards, and is equipped with keypad and / or
a display.
The Invexs output can be set to either Wiegand, XS RF
modulation or RS485 protocol (plain or encrypted)
Functionality and output are determined by the configuration of
the Invexs reader. The configuration is defined using the
programm AEreco, and deployed by the configuration card or
via AEmon. (More information about configurations can be
found in ConvexsInvexs_InstallGuide_E.)
Three LED’s (red, green, blue) and beeper are included (display version has no LED). Ciphers of the
keypad versions light up after activation, so when not active the ciphers are not visible.
Back panel is available in two colours, black and white (e.g. MNK170B, MNK170W)
DIMENSIONS
MOUNTING PROCEDURE INVEXS
For mounting the Invexs, the back plane must be placed on the wall first.
For removing the back plane from the Invexs, unscrew the two screws (1) at
the bottom of the Invexs and push the front cover up (2). Mount the back
plane using the 4 holes.
Connections must be made on the connector on the backside of the front.
After making the connections, replace the front and tighten up the two screws
at the bottom of the Invexs.
®
I
nstallation shee
t
75.2
52
40
6.8
4.8
20.3
120
40
170.5
24.5
1.5
0.5
Dimensions: 171 x 75 x 25 mm.
4 mounting holes available at 52 x
120 mm
Cable outlet: 40 x 40 mm
123
456
789
C0E
Un screw
Push u
p
1
2
123
456
789
C0E
123
456
789
C0E
Date : 12 October 2010 Version 4
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other
right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without
notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher.
© Nedap N.V., IDEAS P.O. Box 103 NL-7140 AC GROENLO The Netherlands Page 1 of 4
Part.no.: 5265800
Invexs 170 readers
Mifare Nedap dual technology readers
GENERAL
The Invexs 170 reader series is capable of reading
(simultaneously) Nedap, Mifare and DESFire credentials due to
its dual reader technology. The Invexs can read Mifare,
DESFire and Nedap cards, and is equipped with keypad and / or
a display.
The Invexs output can be set to either Wiegand, XS RF
modulation or RS485 protocol (plain or encrypted)
Functionality and output are determined by the configuration of
the Invexs reader. The configuration is defined using the
programm AEreco, and deployed by the configuration card or
via AEmon. (More information about configurations can be
found in ConvexsInvexs_InstallGuide_E.)
Three LED’s (red, green, blue) and beeper are included (display version has no LED). Ciphers of the
keypad versions light up after activation, so when not active the ciphers are not visible.
Back panel is available in two colours, black and white (e.g. MNK170B, MNK170W)
DIMENSIONS
MOUNTING PROCEDURE INVEXS
For mounting the Invexs, the back plane must be placed on the wall first.
For removing the back plane from the Invexs, unscrew the two screws (1) at
the bottom of the Invexs and push the front cover up (2). Mount the back
plane using the 4 holes.
Connections must be made on the connector on the backside of the front.
After making the connections, replace the front and tighten up the two screws
at the bottom of the Invexs.
®
I
nstallation shee
t
75.2
52
40
6.8
4.8
20.3
120
40
170.5
24.5
1.5
0.5
Dimensions: 171 x 75 x 25 mm.
4 mounting holes available at 52 x
120 mm
Cable outlet: 40 x 40 mm
123
456
789
C0E
Un screw
Push u
p
1
2
123
456
789
C0E
123
456
789
C0E
wall-mounting
-
A
YYYY-MM-DD
Documentation released
-
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
Assem mnk170
N/A
A.01
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
10.01 OF 1
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
??
??
??
DRW:
CHCK:
YYYY-MM-DD
YYYY-MM-DD
YYYY-MM-DD
DSGN:
black cover
white cover
TORX 20
A
YYYY-MM-DD
Documentation released
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
4
3
2
1
F
E
D
C
B
A
1
2
3
4
A4
3854418
N/A
A
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
N/A
± 0.2
± 1°
1:1
10.01 OF 1
DESCRIPTION
LIN.
ANG.
DSGN:
??
??
DRW:
CHCK:
YYYY-MM-DD
YYYY-MM-DD
YYYY-MM-DD
??
9206167 CUBE Card reader MK170B
black cover
black cover
02
03 04
GROENLO - HOLLAND
1
8
9
10
A1
A2
A3
A4
-
A
YYYY-MM-DD
Documentation released
-
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
cube
N/A
A.01
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
10.01 OF 1
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
??
??
??
DRW:
CHCK:
2009-MM-DD
2009-MM-DD
2009-MM-DD
DSGN:
connect Card reader to the CUBE Core or CUBE Access Plus
05
1234
-
A
YYYY-MM-DD
Documentation released
-
Ref.Nr.
REV.
DATE
DESCRIPTION
APPROVED
N/A
DIM. IN MM
ROUGHNESS ACC.
ISO 1302 in µM
GENERAL TOLERANCES
SCALE:
FORMAT:
DRAWING:
Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this
drawing may be reproduced or distributed in any form or by any means, or stored
in a data base or retrieval system without the prior written permission of NEDAP.
A
B
C
D
E
F
6
3
2
1
F
E
D
C
B
A
5
6
7
8
A3
Assem21
N/A
A.01
ARTICLE NUMBER
REV.
ISO A
GROENLO HOLLAND
SHEET:
4
7
8
5
4
3
2
1
10.01 OF 1
1:1
± 1°
± 0.2
DESCRIPTION
LIN.
ANG.
N/A
??
??
??
DRW:
CHCK:
YYYY-MM-DD
YYYY-MM-DD
YYYY-MM-DD
DSGN:
1 2 3 4
MK170W
MK170B
2
!
Blank wire
Reader
Brown
White
Green
Yellow
: +12V
: Ground GND
: RS485 +
: RS485 -
To door locker
To door locker
connectors
Use crimp connectors and isolation
for wire extension
Connect reader(s)
See wiring instructions reader
Cable Signal name Reader cable
White Reader Ground Black
Brown Reader Power +12V Red
Green Reader RS485 + Yellow
Yellow Reader RS485 - Blue
See also pre-installation
1
Cable shield must be connected to Power GND of CUBE
Card-reader (A2) and GND of external device (metal case)
FCC ID: CGDINVEXS170 and IC: 1444A-INVEXS170
Compliance statements (part15.19)
This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Cet appareil se conforme aux normes RSS210 exemptés de license du Industry Canada. L’opération est soumis
aux deux conditions suivantes:
(1) cet appareil ne doit causer aucune interférence, et
(2) cet appareil doit accepter n’importe quelle interférence, y inclus interférence qui peut causer une opération
non pas voulu de cet appareil.
Warning (part15.21)
Changes or modications not expressly approved by party responsible for compliance could void the user’s
authority to operate the equipment.

Navigation menu