Nedap N V NECKTAGCP NECK TAG CP ACT User Manual 5282039 QR Neck Nedapx

N. V. Nederlandsche Apparatenfabriek NEDAP NECK TAG CP ACT 5282039 QR Neck Nedapx

14r01_Manual CGDNECKTAGCP

NThe NECK TAG CP ACT is a label that oa attacjhed to the cows neck and it determines the where the cow is located in the stable also it also monitors the behavior of individual cows 24/7 and cow’s in heat. A cow in heat shows more activity then being in a “normal” state of condition. The main parts of the NECK TAG CP ACTand health detection are: 1. Cow positioning together with the beacon VP42012. An acceleration sensor detecting motions.3. A battery (active) assisted RFID (=Radio Frequency Identification) tag for individual cow activity monitoring, operating on 433.3, 433.6, 4. The 134.2 kHz inductive RFID tag (passive) is optional The location of the cow in the stable is monitored every .10 seconds.The motions of the cow are stored in the memory of the RFID tag transmitof this transmission is min. 5 minutes and maxThe antenna in the barn receives the activity information from the Rinformation is transported by means of the process controller and is e.g. used for ovulation/heat detecting, automatic cattle feeding, separation of animals, milk registration etc. The Velos program determines the activity increase of an animal. If an animal is a lot more active than usual it will get an heat attention. The red light on the process unit will indicate this attention. The Velos program displays overviews of animals with a clear increased Figures below show how the NECK TAG CP NOTE: The label can only monitor the behavior of the animals if placed on the cows neck in the right position. Wrong Position of the label: 1. Back to front Label attached backwards, the groove (and the arrow on the back of the label) is pointing towards the cows body instead of the cows head.2. Check position Turned sideways on the neck or twisted on the collar. Doc. Part. No. 5282039NECK TAG CP ACT that oa attacjhed to the cows neck and it determines the where the cow is monitors the behavior of individual cows 24/7 and the system will detect the A cow in heat shows more activity then being in a “normal” state of condition. ACT for the purpose of cow positioning and activity meatogether with the beacon VP4201 motions. battery (active) assisted RFID (=Radio Frequency Identification) tag for individual cow activity , 433.8, 434.0, 434.2 and 434.5 MHz. 34.2 kHz inductive RFID tag (passive) is optional. cation of the cow in the stable is monitored every .10 seconds. memory of the RFID tag transmitting this data. The repand max. 15 minutes depending on the cow’s activity. The antenna in the barn receives the activity information from the RFID tag of the individual animals and by means of the receiver VP4102 over CAN bus or Ethernet to the host computer g. used for ovulation/heat detecting, automatic cattle feeding, separation of The Velos program determines the activity increase of an animal. If an animal is a lot more active than usual attention. The red light on the process unit will indicate this attention. The Velos program verviews of animals with a clear increased heat attention on the PC screen. CP ACT is attached to the cow’s neck The label can only monitor the behavior of the animals if placed on the cows neck in the right position. Label attached backwards, the groove (and the arrow on the back of the label) is pointing towards body instead of the cows head. Turned sideways on the neck or twisted on the collar. Doc. Part. No. 5282039 that oa attacjhed to the cows neck and it determines the where the cow is will detect the aning heat – battery (active) assisted RFID (=Radio Frequency Identification) tag for individual cow activity repetition rate of the individual animals and the receiver VP4102 over CAN bus or Ethernet to the host computer g. used for ovulation/heat detecting, automatic cattle feeding, separation of The Velos program determines the activity increase of an animal. If an animal is a lot more active than usual attention. The red light on the process unit will indicate this attention. The Velos program The label can only monitor the behavior of the animals if placed on the cows neck in the right position. Label attached backwards, the groove (and the arrow on the back of the label) is pointing towards
Doc. Part. No. 5282039 Specification Transmitter Information Frequency : 433.3, 433.6, 433.8, 434.0, 434.2 and 433.5 MHz Modulation : FSK modulated DataRate : 100 kbit/s Frequency deviation : 25 kHz On time : 11msec Repeat time : >10 seconds Duty cycle : ≤ 1 % Transmitted Power : EIRP < 1 mW Power Power : Battery powered 3.6 V Antenna Antenna : Integral, Ceramic Chip antenna Environment Operating Temperature : -10 to + 50 °C Storage : -25 to + 70 °C Relative humidity : 10 – 93% non condensing Enclosure : IP class 67

Navigation menu