Nedap N V STOREIDP UHF RFID reader User Manual
N. V. Nederlandsche Apparatenfabriek NEDAP UHF RFID reader
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2000085 |
| Application ID | cSyXRzKBX8Dt+NcHP2ReEA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 91.89kB (1148660 bits) |
| Date Submitted | 2013-06-25 00:00:00 |
| Date Available | 2013-06-26 00:00:00 |
| Creation Date | 2013-06-25 11:38:14 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2013-06-25 11:38:20 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Windows) |
!D POS Ref.Nr. 355 340 1x !D Pos 2x tie-wrap 220 weight: 1.5 kg CB APPROVED CB 20120823 26 26mm / 1” DRW: CB 52 CHCK: CB 52mm / 2.1” 20120823 DSGN: DIM. IN MM GENERAL TOLERANCES SCALE: 1:5 ANG. LIN. FORMAT: A4 ± 0.2 remove cover N/A Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. ± 1° ARTICLE NUMBER IT STORE ID POS READER SHEET: 9965599 N/A 20120823 REV. weight: 1.5 kg mounting !D POS DESCRIPTION Ref.Nr. REV. DSGN: 20120823 20120823 9965599 SHEET: DRAWING: 40.01 OF 1 T9965-599 ISO A ± 0.2 9965599 Copyright (c) by N.V. Nederlandsche Apparatenfabr drawing may be reproduced or distributed in any form in a data base or retrieval system without the prior wr REV. GENERAL LIN. DESCRIPTION CB CHCK: N/A 20120823 CB DRW: CB Table / desk 4x screw (not included) center of antenna drw: CB 2013/05/29 GROENLO - HOLLAND Documentation DESCRIPTION ROUGHNESS ACC. ISO 1302 in µM YYYY-MM-DD DATE GROENL CB APPROVED ARTICLE NUMBER UNIT STORE ID POS READER Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any 3means, or stored in a data base or retrieval system without the prior written permission of NEDAP. chk: description: doc. article no: 9741224 quick reference !D POS rev. : A.02 Ref.Nr. REV. YYYY-MM-DD DATE Documentation released DESCRIPTION APPROVED Copyright © by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reprosheet: 45.01 of 1 DSGN: ?? YYYY-MM-DD GROENLO HOLLAND DIM. IN MM duced or distributed in any form or by any means, or stored in a data baseROUGHNESS or retrieval system without the GENERAL TOLERANCES ACC. SCALE: 1:2 DRW: ?? YYYY-MM-DD LIN. ANG. ISO 1302 in µM prior written permission of NEDAP. drawing: T9741-224 FORMAT: A3 CHCK: ?? YYYY-MM-DD N/A ± 0.2 ± 1° ISO A A.01 DRAWING: weight: 1.5 kg / 3.3 lb. REV. 10.01 OF 1 SHEET: 40.01 OF 1 N.V. Nederlandsche Apparatenfabriek NEDAP. NoApart of this 2012-08-23 Documentation released produced or distributed in any form Ref.Nr. or by any means, REV. or stored DATE DESCRIPTION DRAWING: etrieval system without the prior written permission of NEDAP. T9965-599 GROENLO HOLLAND DIM. IN MM GENERAL TOLERANCES SCALE: 1:5 ROUGHNESS ACC. ANG. LIN. ISO 1302 in µM FORMAT: A4 N/A ± 1° ± 0.2 ISO A DRW: ?? YYYY-MM-DD CHCK: ?? YYYY-MM-DD ARTICLE NUMBER 6mm / 0.2” 41mm / 1.6” ISO A GENERAL TOLERANCES SCALE: 1:1 LIN. ANG. FORMAT: A3 ± 0.2 ± 1° Center of antenna Documentation released DESCRIPTION GROENLO HOLLAND ISO A 200mm 200 / 7.9” 220mm 220 / 8.7” 121,25 CC. N/A 121.25mm / 4.8” 2012-08-23 DATE 1x Power cord C5 ROUGHNESS ACC. ISO 1302 in µM 355mm 355/ 14” 340mm 340/ 13.4” 41 52 APPROVED DSGN: ?? YYYY-MM-DD DIM. IN MM 41 200 4.5mm / 0.2” 110mm / 4.3” 110 26 Documentation released DESCRIPTION DESCRIPTION Center of antenna 4,5 YYYY-MM-DD DATE 9651403 dimensions REV. GROENLO HOLLAND 1x Power Supply 21,25 V. DESCRIPTION ARTICLE NUMBER 9965599 Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored N/A SHEET: REV. A.01 10.01 OF 1 !D POS connections fix cable with tie-wrap fix cable with tie-wrap Micro USB cable (not included) Power supply UTP cable (not included) Led Blue Red place cover Orange Firmware running Error Green Green RFID active Power connect voltage supply Power options: 1. use adapter in box. 2. use IEEE 802.3a* compatible Power over ethernet (not compatible with Nedap Power-over-ethernet inserter used for !D Top or !D Gate) Driver and config-tool on portal Ref.Nr. REV. YYYY-MM-DD DATE Documentation released DESCRIPTION GROENLO HOLLAND ROUGHNESS ACC. ISO 1302 in µM N/A ISO A APPROVED DIM. IN MM GENERAL TOLERANCES SCALE: 1:2 LIN. ANG. FORMAT: A3 ± 0.2 ± 1° DESCRIPTION ?? YYYY-MM-DD CHCK: ?? YYYY-MM-DD N/A Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. ?? YYYY-MM-DD DRW: ARTICLE NUMBER 9965599 DSGN: SHEET: REV. A.01 10.01 OF 1 N/A DRAWING: Model: !D POS Region 2 FCC ID: CGDSTOREIDP IC: 1444A-STOREIDP This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Cet appareil se conforme aux normes RSS 210 exemptés de license du Industry Canada. L’opération est soumis aux deux conditions suivantes: (1) cet appareil ne doit causer aucune interférence, et (2) cet appareil doit accepter n’importe quelle interférence, y inclus interférence qui peut causer une opération non pas voulu de cet appareil. Les changements ou modifications n’ayant pas été expressément approuvés par la partie responsable de la conformité peuvent faire perdre à l’utilisateur l’autorisation de faire fonctionner le matériel. FCC and IC Radiation Exposure Statement: This equipment complies with FCC and Canadian radiation exposure limits set forth for an uncon¬trolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme a RSS-102 limites énoncées pour un environne¬ment non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de Classe B est conforme à la norme Canadienne ICES-003 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2013:06:25 11:38:14+02:00 Metadata Date : 2013:06:25 11:38:20+02:00 Modify Date : 2013:06:25 11:38:20+02:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:256e138a-9274-4a5c-ab2d-69eb29f9f3a8 Original Document ID : xmp.did:FD7F1174072068119457DD866944A140 Document ID : xmp.id:6CBF0EEC7ADDE2118B82972E818B1231 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:6BBF0EEC7ADDE2118B82972E818B1231 Derived From Document ID : xmp.did:D9682940ADEDE111B8DADAC3E39328F7 Derived From Original Document ID: xmp.did:FD7F1174072068119457DD866944A140 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2013:06:25 11:38:14+02:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 4 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools