Nedap N V UPASSREACH UHF RFID Reader for EPC Gen2 Class 1 tags User Manual application note UHF

N. V. Nederlandsche Apparatenfabriek NEDAP UHF RFID Reader for EPC Gen2 Class 1 tags application note UHF

Contents

datasheet2

Install the windshield tag horizontal on the inside of the windshield. For moreRead lobe characteristicsApplication note uPASS ReachThis application note describes the installation of the uPASS Reach reader for parking entry control applications. The uPASS Reach can identify an AVI tag from distances up to max. 4 meters [12 ft]. Ensure the tag is positioned on the same side of the windshield as the reader••Present the tag in line-of-sight to the reader.•This document is based on a windshield angle of 45°. Tilt the reader with a •ParkinguPASS Reach installed on a pole at the barrier.Figure 2: uPASS Reach pole mounting, uPASS Reachinstalled at ° degrees anglea 4545° angleExample of a windshield tag is located. 45 ° facing the windshield to ensure optimal alignment between reader and tag. Onto a pole, located directly behind the barrier, using the pole mounting kit (7591152).Installation height between 1,20 and max. 2 meters from ground level.••Use of windshield mounted tags •Position reader;123Item ParametersDescriptionBetween 1.20 and max 2 meters [6 ft] above driving lane ground levelMounting heightMounting positionFrequency settingOnto a pole directly mounted behind the barrierStandard frequency, in case of multi-laneapplication, use frequency offset. Figure 1: detection angle 45 degreesinformation see the Windshield Tag Installsheet.•Tilt the reader with a 45 facing the windshield to ensure optimal alignment ° between reader and tag.
Multiple uPASS Reach readersFigure 4: Multi-lane application with the uPASS ReachThe uPASS Reach can also be mounted onto an existing goose neck oruPASS Reach installed on goose neckor pedestral pedestal in front of the barrier, using the weather protection hood (9943803). When there is a gate column located in front off the barrier, the uPASS Reach canItem Description Parametersinstalled at a 45° degrees angleFigure 3: uPASS Reach is installed on a gooseneckTable : Application issues when uPASS Reach is mounted onto gooseneckMounting onto an existing goose neck, pedestalPosition uPASS Reach or gate column. For new installations positionthe goose neck or pedestal 2,5 to 3 meter[8 - 10 ft] before the barrier 23Position the reader at about 1,3 meter [4 ft] from ground level (average car side window height). Width reading angle 45°1Mounting heightUse of UHF Combi CardPresent the tag in line of sight One reader required per driving direction Use frequency offset to avoid interference. See the application note UHF dense••••2,5 - 3 meters1,3 metersbe mounted directly onto the gate column. reader mode.

Navigation menu