Nedap N V VELOS1 Inductive Proximity Tag Reader User Manual Manual
N. V. Nederlandsche Apparatenfabriek NEDAP Inductive Proximity Tag Reader Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 788658 |
| Application ID | PJRJqa4hcS/79w1dsxgKUQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 13.1kB (163726 bits) |
| Date Submitted | 2007-05-04 00:00:00 |
| Date Available | 2007-05-04 00:00:00 |
| Creation Date | 2007-04-20 13:55:02 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2007-04-27 11:22:21 |
| Document Title | Microsoft Word - VP1001-200PM-00-ISO Reader Motor Control 1.0 draft.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | b.uninge |
TECHNICAL MANUAL VP1001 ISO-Reader motor control This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © Nedap N.V., AGRI P.O. Box 104 NL-7140 AC GROENLO The Netherlands VP1001-200PM-00-ISO Reader Motor Control Preliminary 12-2006/06 ISO-Reader motor control Contents General Connections LED indicators Display menu Antenna adjustment Installation steps Update Specifications VP1001-200PM-00-ISO Reader Motor Control 4-2007/1.0 1 General The VP1001 is a local unit in the VELOS system and usually installed for identification of animals for feeding, weighing, milking, heat detection etc. The VP1001 has the following main tasks : Identification of tags (134.2 kHz FDX/HDX) Controlling outputs, 6 outputs available to activate e.g. lights, motors, valves, relays Reading inputs, 6 inputs available for e.g. sensors, switches Output/input 1 till 4 ( I/O 1 till I/O 4 ) can be used to control feed motors or as normal output/input Output/input 5 and 6 ( I/O 5 till I/O 6 ) can only be used as output/input. The use of feed motors or output/input must be configured in the software (see manual of the V-pu) Following antenna types can be used : - V-sense antennas - EWA transformer with stainless steel antenna strip - HDPE antenna with HDPE antenna tuner A booster (VP1002) can be used to amplify the antenna field for high performance identification Reference manuals : PS0000-200PM-00 Velos general overview VP8001-200PM-00 V-pu VP1002-200PM-00 ISO-Booster VP6001-200PM-00 V-sense This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. VP1001-200PM-00-ISO Reader Motor Control 4-2007/1.0 Page 1 2 Connections green red white brown orange white orange blue white blue black red Figure above shows the I/O of the VP1001. The motor, output and input is an example. The configuration is depending on the used software on the V-pu, so called behaviour components. Use the display menu and push button to check and configure the I/O functions. Vin CAN SYNC I/O 1 .. 4 I/O 5 .. 6 ANTENNA CH CL MI F SYNC Input voltage 24 VDC, +20% -20% Minus CAN high (cable twisted pair with CL) CAN low (cable twisted pair with CH) Shielding of CAN-bus cable Synchronisation for HDX, AC (no plus or minus, cable must be twisted pair) See above Motor output or normal output max 3A Minus for motor output or normal output Input of motor or normal input Minus for motor input or normal input Output max 3A Minus for output (O) and minus input (I) Input Antenna with external adjustment (adjustment not on this V-pack) Antenna with no adjustment, adjustment on this V-pack Antenna minus (shield of coax cable) Frequency synchronisation (not used yet) VP1001-200PM-00-ISO Reader Motor Control 4-2007/1.0 Page 2 3 LED indicators display POWER STATUS Display V in V out LAST +24V M1 .. M4 I1 .. I4 TUNING /ID on off Green on off Blue Slow blinking Very fast blinking Fast blinking 1 short flash 2 short flashes 3 short flashes Address indicated Green on off Orange Orange blinking Red Green on off Orange blinking Red blinking Green on off Orange blinking Red Red blinking Green on off Green on off Red blinking Green on off Green on Green blinking Red on Red on Red blinking VP1001-200PM-00-ISO Reader Motor Control push button Power on No power Operating ok Service mode activ Downloading or error during download V-pack not coupled Firmware present but not activ No firmware present No communication Communication status ok Input power applied No power Low power, lower then 20V Wrong CAN-bus connection, Vin and Vout swapped Error, plus and minus swapped Output power No power Low power Error, plus and minus swapped V-pack is last one on the CAN-bus V-pack is not last one on the CAN-bus CAN-bus error and last V-pack on CAN-bus CAN-bus error CAN-bus warning / wrong connected 24V output switched on Output switched off Output on Output off Output error Input contact open Input contact closed Antenna ok Antenna ok and tag identified Antenna not tuned correctly Antenna not tuned correctly Antenna error / not connected 4-2007/1.0 Page 3 4 Display menu DISPLAY ADDRESS Shows the actual address SET ADDRESS Change the address ADJUST ANTENNA Antenna tuning will be shown by output 6 (lamp) ANTENNA POWER Min/max 10 / 99. Normally set to 99. Possibility to set a lower value. ANTENNA SENSITIVITY SQUELCH Min/max 0 / 9. Normally set to 0. Possibility to set a lower value. SETTINGS TO DEFAULT All HF settings back to factory settings DISPLAY ERROR Shows error code TEST ALL OUTPUTS All outputs are switch on one by one. Test results are shown on the display. TEST MOTOR OUTPUT TEST OUTPUT TEST INPUT NOISE LEVEL FDX Shows noise level measured by the FDX receiver NOISE LEVEL HDX Shows noise level measured by the HDX receiver TEST IDENTIFICATION Shows last 2 digits of a tag number Press button until blinking Press button short To leave menu: press button until display is empty How to use the display and push button Normally the display is off. If there is no connection to the V-pu the address is shown. It is also possible some program states of a behaviour component are shown during operation. Activate the menu press short on the button, the display menu is shown Scroll down press short Select press until blinking Change and store select item to change, open item by pressing till blinking, change by pressing short, store by pressing to blinking Check a setting select the item to check, press until blinking, first value shown is actual setting The display is normally automatically switched off after 30 minutes. VP1001-200PM-00-ISO Reader Motor Control 4-2007/1.0 Page 4 5 Antenna adjustments Antenna tuning After first time power up the antenna tuning must be checked. Check the TUNING led, green is OK and means the antenna is correctly tuned. When the green led is not ON the antenna must be tuned. Antenna tuning : - Turn Lt on the antenna till the green led is ON (use a plastic screw driver) Green on Red on Red on Red on All off Antenna tuning ok Antenna out of range, turn to the right till green led is on Antenna out of range, turn to the left till green led is on No antenna connected or low antenna signal Antenna switch off by the software If there is no antenna led on, software has set the antenna field off, first set the antenna in ID test mode by using the display/push button. Antenna power Default the antenna power is set to maximum (99) and needs no adjustments. Lowering the antenna power will reduce the reading distance of the antenna. Check the antenna power The antenna power level is shown on the display in the service menu at HF option AP (Adjust Power) - Select menu option AP (Adjust Power) on the display by using the push button next to the display - Push the button until the display starts to blink, a value will appear on the display - The value on the display is the actual power setting. 99 is the default factory setting. - To leave the menu without modifying the settings press the button until the display blanks (press about 4 seconds) Modify the antenna power - Select the actual antenna power on the display (see above check antenna power) - Press the button shortly, the first value will change - Press until the desired value, hold now the button until blinking - The second digit can be changed in the same way - When the desired value is on the display, press until the display blinks - The next menu item AS is now indicated. - To leave the service menu and return to normal operation, press the button until the display blanks (press about 4 seconds) VP1001-200PM-00-ISO Reader Motor Control 4-2007/1.0 Page 5 Antenna squelch Antenna squelch is a possibility to set a threshold for the ID level of a tag. It means the antenna power is still the same, but the software will not transfer weak received tag numbers. Default the antenna squelch is set to minimum (-0). This means no threshold. Maximum is -9. Check the antenna squelch level The antenna squelch level is shown on the display in the service menu at HF, option AS (Adjust Squelch) - Select menu option AS (Adjust Squelch) on the display by using the push button next to the display - Push the button until the display starts to blink, a value will appear on the display - The value on the display is the actual power setting. -0 is the default factory setting. - To leave the menu without modifying the settings press the button until the display blanks (press about 4 seconds) Modify the antenna squelch level - Select the actual antenna squelch level on the display (see above check squelch level) - Press the button shortly, the value will change - Press until the desired value, hold now the button until blinking - The next menu item “df” is now indicated. - To leave the service menu and return to normal operation, press the button until the display blanks (press about 4 seconds) Installation steps 1. 2. 3. 4. Install all wiring Switch on the power to the system Check the adjustment of the antenna (green led on) Check the connected equipment like lamps, motors, sensors etc. Use the display/push button menu to check the correct functioning. 5. Set the addresses, an address must be unique on both CAN-bus channels 6. Start up the web browser on the V-pu and configure the system (see manual of the V-pu) VP1001-200PM-00-ISO Reader Motor Control 4-2007/1.0 Page 6 7 Update Firm ware A VP1001 is equipped with software to activate in- and outputs, display / push button and a motor safeguard. This software is called firmware. During manufacturing the firmware is programmed and ready for use. In case of an update it is possible to download new firmware thru the CAN-bus. In the Velos system the web browser interface of the V-pu (VP8001) is used to handle this. More details about download new firmware see also the manual of the V-pu (VP8001). Specifications Specifications VP 1001 (art.no. 9910905) Dimensions 143 x 120 x 68 mm LxWxH (excluding mounting rail) Weight: ± 360 gr CAN CAN-bus communication 125 kBit Power Input voltage 25 VDC, +20% -20% Max power consumption 300 mA with antenna switched on Maximum power consumption 2,5 A Protected against reverse connection power supply Software Downloadable by the CAN network Inputs Reading inputs, analog (0-40V) and digital. Suitable for NPN and PNP sensors. Outputs Max. 2.5 Amp by current limiter, short-circuiting protected Motor safe-guard (after 25 sec) Antennas 800 µH. Different types possible. Detection distance Varies per antenna Synchronisation Synchronisation according to ISO 11785 Environment Temperature: Operating: -10 – 55 °C, Storage: -25 – 70 °C Relative humidity: 10 – 93% non condensing IP class IP 30. When installed in V-box IP 65 (cover and cables installed correctly !) Cable specifications CAN-bus Synchronisation Antenna Outputs Inputs Velos cable Velos cable Coax RG58. Max. length depending on antenna type. CE approved at cable length < 3m CE approved at cable length < 3m Always use a NEDAP power supply The Nedap guarantee-regulations are only valid when is installed as indicated in this manual. Install data cables at a safe distance from (high) powered cables More information For more detailed information contact your local Nedap supplier or check the internet site. VP1001-200PM-00-ISO Reader Motor Control 4-2007/1.0 Page 7 VP6001 V-sense antenna This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © Nedap N.V., AGRI P.O. Box 104 NL-7140 AC GROENLO The Netherlands VP6001-200PM-00 V-sense DRAFT 01-2007/0.1 VP6001 V-sense antenna General The VP6001 is used as antenna in Velos system and connected to a V-pack with identification. Connections The VP6001 is connected to a V-pack by a coax cable, see manual of the concerning V-pack. To open the VP6001 : remove screws at the side. To antenna of V-pack Lt Adjustment Tuning must be done by Lt with a plastic screw driver. See manual of the connected V-pack for tuning instructions. VP2001-200PM-00 Power supply 01-2007/0.1 Page 2 of 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2007:04:20 13:55:02+02:00 Modify Date : 2007:04:27 11:22:21+02:00 Producer : Acrobat Distiller 7.0.5 (Windows) Creation Date : 2007:04:20 13:55:02+02:00 Mod Date : 2007:04:27 11:22:21+02:00 Author : b.uninge Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2007:04:27 11:22:21+02:00 Document ID : uuid:5e8ca85d-7b0e-4568-92ec-2ad438a11b8e Instance ID : uuid:cdbab51e-efd7-4909-bb47-4979de632179 Format : application/pdf Title : Microsoft Word - VP1001-200PM-00-ISO Reader Motor Control 1.0 draft.doc Creator : b.uninge Page Count : 11EXIF Metadata provided by EXIF.tools